In order to prepare internal project, I'm preparing to use RabbitMQ.
But, I faced serious problem when I start to run rabbitMQ.
I have to assume environment that we couldn't use internet.
Of course, I can use RPM installer, but I prefer to build source to learn Linux.
So, I downloaded latest Erlang and RabbitMQ tar sources at this moment.
First step, I extracted erlang to custom directory such as /square/dpa/rabbitmq/otp_src_22.1
then moved to that directory, then I did below commands.
./configure --without-termcap --with-ssl --prefix=/square/dpa/rabbitmq/erlang
make
make install
(Of course, I added erlang directory into PATH manually.)
Then, I extracted rabbitmq on specific directory also such as /square/dpa/rabbitmq/rabbitmq_server-3.8.1, then moved to /sbin, run './rabbitmq-server'
Unfortunately, I faced below fail log.
So how I can solve this problem? I can just expect that it was occured Erlang-Crypto is not installed.
If my expectation is correct, pls let me know how to install crypto,
and if there's another reason, pls tell me free your opinion.
-------------- log for './rabbitmq-server'
BOOT FAILED
Error description:
init:do_boot/3
init:start_em/1
rabbit:start_it/1 line 465
rabbit:broker_start/1 line 341
rabbit:start_loaded_apps/2 line 591
app_utils:manage_applications/6 line 126
lists:foldl/3 line 1263
rabbit:'-handle_app_error/1-fun-0-'/3 line 714
throw:{could_not_start,credentials_obfuscation,
{credentials_obfuscation,
{bad_return,
{{credentials_obfuscation_app,start,[normal,[]]},
{'EXIT',
{undef,
[{crypto,strong_rand_bytes,[128],[]},
{credentials_obfuscation_app,start,2,
[{file,"src/credentials_obfuscation_app.erl"},
{line,34}]},
{application_master,start_it_old,4,
[{file,"application_master.erl"},
{line,277}]}]}}}}}}
Log file(s) (may contain more information):
/square/dpa/rabbitmq/rabbitmq_server-3.8.1/var/log/rabbitmq/rabbit#epsqpad01.log
/square/dpa/rabbitmq/rabbitmq_server-3.8.1/var/log/rabbitmq/rabbit#epsqpad01_upgrade.log
{"init terminating in do_boot",{could_not_start,credentials_obfuscation,{credentials_obfuscation,{bad_return,{{credentials_obfuscation_app,start,[normal,[]]},{'EXIT',{undef,[{crypto,strong_rand_bytes,[128],[]},{credentials_obfuscation_app,start,2,[{file,"src/credentials_obfuscation_app.erl"},{line,34}]},{application_master,start_it_old,4,[{file,"application_master.erl"},{line,277}]}]}}}}}}}
init terminating in do_boot ({could_not_start,credentials_obfuscation,{credentials_obfuscation,{bad_return,{{_},{_}}}}})
Related
Setup: IntelliJ IDEA 2022.2.2, Erlang 25.0
I am trying to run the Erlang code available at https://erlangbyexample.org/send-receive. I am able to run in werl and Windows command line. But I am getting the error "init terminating in do_boot" when I run in IntelliJ.
I checked a similar issue reported in this question , wherein the solution was to convert list input to integer/s. However, my Erlang code does not expect any input, it just expects the function name.
Please provide a pointer to resolve the issue.
"C:\Program Files\Erlang OTP\bin\erl.exe" -pa F:/1TB/P/workspace-IntelliJ-Erlang1/out/production/workspace-IntelliJ-Erlang1 -pa F:/1TB/P/workspace-IntelliJ-Erlang1 -eval send_recv:run(). -s init stop -noshell
{"init terminating in do_boot",{undef,[{send_recv,run,[],[]},{erl_eval,do_apply,7,[{file,"erl_eval.erl"},{line,744}]},{init,start_it,1,[{file,"init.erl"},{line,1234}]},{init,start_em,1,[{file,"init.erl"},{line,1220}]},{init,do_boot,3,[{file,"init.erl"},{line,910}]}]}}
init terminating in do_boot ({undef,[{send_recv,run,[],[]},{erl_eval,do_apply,7,[{_},{_}]},{init,start_it,1,[{_},{_}]},{init,start_em,1,[{_},{_}]},{init,do_boot,3,[{_},{_}]}]})
Crash dump is being written to: erl_crash.dump...done
I configured RunConfiguration to BUILD before RUNNING ("Before launch" section). As result, RunConfiguration was creating an empty folder "../out/production/workspace-IntelliJ-Erlang1" without .beam files, if the folder does not exist. It would delete any existing .beam files if the folder exists. Hence, the RUN was failing eventually.
As a workaround, I removed the BUILD before RUNNING option from RunConfiguration. And, I manually built using BuildProject before RunConfiguration.
TODO: I will check why was not RunConfiguration able to generate the .beam file.
Check if there is a file called send_recv.beam in either of the directories specified as code path in the -pa arguments. (The undef error means that it can't find the function send_recv:run/0, more often than not because it can't find the compiled module.)
My guess is that this file is actually in the directory where you ran Erlang from the command prompt, but IntelliJ runs Erlang using another working directory. The current working directory is part of the code path by default, which would be why this works from the command prompt but not within IntelliJ.
I have Homebrew Apache installed and trying to connect Coldfusion Server 2016 with Tomcat mod_jk.
I downloaded the source code from https://tomcat.apache.org/download-connectors.cgi
I followed the directions to compile it, tried few different ways, but when I get to the "make" command, I keep getting the same error:
In file included from jk_ajp12_worker.c:26:
In file included from ./jk_ajp12_worker.h:26:
In file included from ./jk_logger.h:26:
In file included from ./jk_global.h:340:
./jk_types.h:56:2: error: Can not determine the proper size for pid_t
#error Can not determine the proper size for pid_t
^
./jk_types.h:62:2: error: Can not determine the proper size for pthread_t
#error Can not determine the proper size for pthread_t
^
2 errors generated.
make[1]: *** [jk_ajp12_worker.lo] Error 1
make: *** [all-recursive] Error 1
These are the different commands I've tried to compile:
./configure --with-apxs=/opt/homebrew/bin/apxs
./configure CFLAGS='-arch arm64e' APXSLDFLAGS='-arch arm64e' --with-apxs=/opt/homebrew/bin/apxs
./configure CFLAGS='-arch arm64e' APXSLDFLAGS='-arch arm64e' --with-apxs=/opt/homebrew/bin/apxs --host=arm
I recently got this new MacBook Pro 16" and migrated everything over from my 2017 MacBook Pro (Intel chip). I was running stock Apache with Coldfusion Server 2016, but when I tried to start up Apache on the new MacBook, it didn't like my mod_jk.so file and threw an error:
httpd: Syntax error on line 542 of /opt/homebrew/etc/httpd/httpd.conf: Syntax error on line 2 of /opt/homebrew/etc/httpd/mod_jk.conf:
Cannot load /Applications/ColdFusion2016/config/wsconfig/2/mod_jk.so into server: dlopen(/Applications/ColdFusion2016/config/wsconfig/2/mod_jk.so, 0x000A):
tried: '/Applications/ColdFusion2016/config/wsconfig/2/mod_jk.so'
(mach-o file, but is an incompatible architecture (have 'x86_64', need 'arm64e'))
I appreciate any help or input. Thank you.
I've finally installed Apache2 with Tomcat on my M1 and it all works.
The one thing you must do is to install a fresh Apache from Macports or HomeBrew. This is because most old installations copied from your old mac to your new one will now be in the read-only part of your file system and SIP won't let you near them. You will find weird and wonderful workarounds (apachectl told me I had to codesign mod_jk.so for example and I wasted a lot of time doing it and in the end it was pointless) and you will attempt to get the old installation to work, but trust me it's not worth it.
You will need to compile a fresh jk_module (mod_jk.so). This is what I did:
Download latest connector https://dlcdn.apache.org/tomcat/tomcat-connectors/jk/tomcat-connectors-1.2.48-src.tar.gz, save the .gz and unzip it.
Change directory to the native folder.
run which apxs to tell you the path to apxs for the ./configure command
The path mine gave was: /opt/local/bin/apxs. Use it as the path in the ./configure command below.
The commands are as follows (actually don't bother running them yet because they will fail):
./configure --with-apxs=/opt/local/bin/apxs
make
However make will fail with:
./jk_types.h:56:2: error: Can not determine the proper size for pid_t
#error Can not determine the proper size for pid_t
^
./jk_types.h:62:2: error: Can not determine the proper size for pthread_t
#error Can not determine the proper size for pthread_t
^
2 errors generated.
make[1]: *** [jk_ajp12_worker.lo] Error 1
make: *** [all-recursive] Error 1
This is a problem for M1 macs that has been fixed. So for the moment we will abandon the 1.2.48 source and download the source with the fix.
But don't delete the 1.2.48 source because the fix source is missing a few files which you will copy straight over from the 1.2.48 source.
The page to download the fix for Mac OS is here: https://github.com/apache/tomcat-connectors, which is commit e719874 on Jun 30, 2021.
Click on the green 'Code' button and then on 'Download ZIP'.
Unzip the new source and cd to 'native'
Run the commands:
./configure --with-apxs=/opt/local/bin/apxs
make
And whenever it stops and complains that something is missing, find it in the 1.2.48 source and copy it over to the same position in the new source and try again. It will happen two or three times.
I got this error at one point:
/home/myuser/source/mod_auth_cas/mod_auth_cas/missing: line 81: aclocal-1.15: command not found
WARNING: 'aclocal-1.15' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<http://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<http://www.gnu.org/software/autoconf>
<http://www.gnu.org/software/m4/>
<http://www.perl.org/>
make: *** [aclocal.m4] Error 127
Then I read somewhere to run autoreconf -f -i (which fixed it).
When make finishes, find your nice new mod_jk.so file in the native/apache-2.0 folder and copy it to where all your other modules are. I have a Macports installation so Homebrew is probably different, but my modules are in /opt/local/lib/apache2/modules.
Don't forget to add the LoadModule line in httpd.conf if it isn't already there:
LoadModule jk_module /opt/local/lib/apache2/modules/mod_jk.so
You might have some trouble working out which apache2 folders contain the new install, and not an old installation - I found two other installations knocking about trying to confuse me.
My config is here: /opt/local/etc/apache2/httpd.conf
apachectl is very useful for configuration.
apachectl -t -D DUMP_INCLUDES will find all the configuration files it is using. This totally saved me because it showed me that my httpd.conf file, which I had copied from elsewhere, was still pointing via 'Include' commands at other old config files in the wrong place.
apachectl configtest will test your config for you and print out any mistakes it finds. It pointed at 4 modules that it didn't like so I just excluded them. Though obviously read the messages carefully and google if you are not sure why apachectl doesn't like something. If it replies 'Syntax OK' you are ready to go.
This is a mysterious message I got a lot until I worked out that it was because httpd.conf was pointing at the wrong modules folder (an old install of apache2) for each module, so it was loading stuff that presumably was not compiled for 64bit
httpd: Syntax error on line 76 of /opt/local/etc/apache2/httpd.conf:
Cannot load libexec/apache2/mod_authz_owner.so into server:
dlopen(/usr/libexec/apache2/mod_authz_owner.so, 0x000A): symbol not
found in flat namespace '_apr_stat$INODE64'
This is my launch command using the plist which Macports automatically created:
sudo launchctl load -w /opt/local/etc/LaunchDaemons/org.macports.apache2/org.macports.apache2.plist
And to unload:
sudo launchctl unload /opt/local/etc/LaunchDaemons/org.macports.apache2/org.macports.apache2.plist
run ps ax|grep httpd to see if it's running.
Logging: Don't forget to sudo to create the jk folder in /var/log/apache2 if it doesn't already exist, otherwise apache or tomcat will have mysterious problems or won't start or something (the /var/log/apache2/jk folder is needed for jk.log).
Another problem cropped up just as I thought I had it made: apache
was unable to write its pid file on startup. Again this was because the position set in my config for the pid file was from the configuration on my old mac, and the position chosen was in a read-only location.
To change this you need to set the PidFile parameter, which I found in the following file:
/opt/local/etc/apache2/extra/httpd-mpm.conf
and it looks like this:
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
# Note that this is the default PidFile for most MPMs.
#
<IfModule !mpm_netware_module>
PidFile "local/run/apache2/httpd.pid"
</IfModule>
Don't worry about what the IfModule thing is doing, just set the PidFile to a writeable location, which as you can see is a relative path. You may be wondering what goes in front of the local folder.
What goes in front is the ServerRoot parameter set in httpd.conf:
ServerRoot "/usr"
So my pid will be written at /usr/local/run/apache2/httpd.pid. I had to create the run and apache2 folders.
That's about it. There are various logs that might indicate errors if you are stuck:
/var/log/apache2/error_log
And the jk.log for the apache/tomcat connector:
/var/log/apache2/jk/jk.log
And there's always the system log which just might tell you something:
/var/log/system.log
I hope very much that this helps someone. However it was very long and complicated and I have surely missed something that I did along the way, so if you come across some new problem I will see if I can help.
Running ColdFusion on a Mac is consistently a PITA. Doesn't matter if it's CF 9, 10, 11, all the way to current. Especially when you're dealing with a non-Intel based chipset. You are also trying to get an older and custom build of Toncat running on a chipset that likely isn't supported. You're also not the only one having this issue with CF 2016 on the M1 chip (they didn't find a solution either).
Try using CommandBox to run CF. It will download the server as a JAR file and run it on the Glassfish servlet container (IIRC). You won't need Apache either. It's really quite simple to get up and running.
https://commandbox.ortusbooks.com/embedded-server/multi-engine-support
Once you have it installed, go to your application's root folder in the CLI:
start cfengine=adobe#2016
It will download & install the server, then start the application.
Check the docs for more info.
I wrote a Singularity container that works just fine on my computer. However, when a colleague of mine tries to run it, he gets the error output
FATAL: container creation failed: failed to resolve session directory /usr/local/var/singularity/mnt/session: lstat /usr/local/var: no such file or directory
In the past, he could run containers I build. In fact, he used being able to run a container with the same recipe. The change was that the version of Singularity on the machine I use to build it was upgraded.
I entered the error in a search engine, and I only found a single hit, https://forum.image.sc/t/improving-cluster-supercomputer-performance-tesla-v100-volta-16-32gb-gpu/37459/8, in which this is not resolved.
Does anybody know a way to fix this? Or what the source of the problem is? Or a workaround, preferably one that does not require me to downgrade Singularity? (The machine on which I build it is shared between several users, that's why I don't want to do that.)
Okay, this was somewhat trivial to solve, we just had the colleague create the required folder,
mkdir -p /usr/local/var/singularity/mnt/{container,final,overlay,session}
I'm following these steps outlines on this link, however when I try to start the server nothing happens nor can I connect to anything from the client. Does anyone know how to run this?
when I try from a command prompt instead of double clicking the redis-server.exe I get this message
[11868] 23 Jul 11:58:26.325 # QForkMasterInit: system error caught. error code=0
x000005af, message=VirtualAllocEx failed.: unknown error
http://bartwullems.blogspot.ca/2013/07/unofficial-redis-for-windows.html
The easiest way to install Redis is through NuGet:
Open Visual Studio
Create an empty solution so that NuGet knows where to put the packages
Go the Package Manager Console: Tools –> Library Package Manager –>Package Manager Console
Type Install-Package Redis-64
image
Go to the Packages folder and browse to the Tools folder. Here you’ll find the Redis-server.exe. Double click on it to start it.
Redis is ready to use and start’s listening on a specific port(6379 in
my case)
image
Let’s open up a client and try to put a value into Redis. Start Redis-cli.exe. It already connects to the same port by default.
image
Add a value by executing following command:
image
Read the value again:
image
Try to run with redis-server --maxheap 4000000
Miguel is correct, but it is not that simple. To start redis-server either as a service or from the command prompt, the amount of available RAM and disk space must be sufficient for Redis to run as configured.
Now, if no configuration file is specified when running Redis, it will use the default configuration values. All of this is documented in the redis.windows.conf file as well as in the document "Redis on Windows.docx" (both deployed with the redis installation).
In my experience, errors when starting Redis usually come from lack of available resources (RAM or disk space) or some incorrect configuration of maxhead or maxmemory parameters.
To troubleshoot this kind of behavior, check your system's available resources and try running redis-server from the command line varying the parameters maxmemory, maxheap, and/or heapdir. The loglevel parameter set to verbose might also help diagnosing the issue.
Regards
I have a trouble with libav.
I used MinGW and MSYS to build libav on windows. However, When I use "make", after some file(.o file) were build i get error,
It is
$ make
AR libavcodec/libavcodec.a C:\msys\mingw\bin\ar.exe: libavcodec/: Permission denied
make: *** [libavcodec/libavcodec.a] Error 1
After that, I view the permission of libavcodec folder, I have all permission. :|
Please help me solve this trouble or give me a full instruction to build libav on windows (I use win7 x64 and have msys, mingw)
Thanks!!!
I'm not sure if this is relevant, but I had the same error when trying to make ffmpeg. Initially I was getting a missing separator error (in one of the makefiles) when I used configure. I found a page that suggested checking that git was using unix line endings rather than windows (CR LF). So I used
git config --global core.autocrlf false
to set git to use unix line endings and then thought I'd updated my source (being new to git, it turned out I hadn't). I still got the missing separator error, so I added a tab to the start of the line and configure completed. I then used make and would get the same error you're getting. I saw in some of the other makefiles that they still had windows line endings, so I deleted the entire directory apart from the .git folder as mentioned here, and then used
git reset --hard
to get the files again. After this configure and make worked without error, so my guess would be that you're using windows line endings or there's something wrong with the makefiles.