I have a project implemented using NUXT.js (ssr mode). Every time I refresh pages, I got three or four sse requests (like _loading/sse) in the network console. Those sse requests are slow and would fail in the end and they cause page loading time slow in my computer (I run whole project in local computer).
Anyone knows what those sse requests are and how to get rid of them?
What you refer to is a loading-screen and looks like there must be something in your app which si firing many requests and takes quite a while to render or fail.
You need to check through your app code what generates those requests and where they might fail.
Related
I've built up an API application with ASP.NET Core 2.2.
Everything has been fine. Except one PATCH API, which takes an ID and a list, to replace the list of corresponding item.
This API works fine with POSTMAN too. Simply and fast, works just as expected.
However, to run on browsers, it stalls 1 minute to send that request.
I've tried to make it simple by rewriting the App within only one jQuery function, to check if the problem is on my frontend app; however it still stalls for 1 minute.
I've looked up stalled, people say that it can be a Chrome policy to load maximum 6 requests at the same time; however it's not my case. There's only such request at that time, and every other API works fine except this one.
Also, I've tried with other browsers: Firefox and Edge, but it's still the same.
According to the article Chrome provides:
Queueing. The browser queues requests when:
There are higher priority requests.
There are already six TCP connections open for this origin, which is the limit. Applies to HTTP/1.0 and > HTTP/1.1 only.
The browser is briefly allocating space in the disk cache
Stalled. The request could be stalled for any of the reasons described in Queueing.
It seems that getting "stalled" for long, means that the request wasn't event sent. Does it mean that I can just exclude the possibility to fix backend API?
And also, since that there's no other request at the same time, does it mean that it most likely goes to the reason that "The browser is briefly allocating space in the disk cache", or is there any other reason?
And I also wander why only this API gets this issue. Is there anything special with the method "PATCH"?
At first use stopwatch and evaluate response time of your code in browser and postman and see how take long time in each.
If both is same, don't touch your code because your problem isn't from your method.
If you can, test it with 'post http attribute' till know your problem is because of it or not.
However I guess reason of it is your system.
Of course it's possible ypur problem resolve with changing pipeline (startup.cs) . There are also problems like CORS that occurred only in browsers and not postman.
I am using the UI Automation COM-to-.NET Adapter to read the contents of the target Google Chrome browser that plays a FLASH content on Windows 7. It works.
I succeeded to get the content and elements. Everything works fine for some time but after few hours the elements become inaccessible.
The (AutomationElement).FindAll() returns 0 children.
Is there any internal undocumented Timeout used by UIAutomation ?
According to this IUIAutomation2 interface
There are 2 timeouts but they are not accessible from IUIAutomation interface.
IUIAutomation2 is supported only on Windows 8 (desktop apps only).
So I believe there is some timeout.
I made a workaround that restarts the searching and monitoring of elements from the beginning of the desktop tree but the elements are still not available.
After some time (not sure how much) the elements are available again.
My requirements are to read the values all the time as fast as possible but this behavior makes a damage to the whole architecture.
I read somewhere that there is some timeout of 3 minutes but not sure.
if there is a timeout, is it possible to change it ?
Is it possible to restart something or release/dispose something ?
I can't find anything on MSDN.
Does anybody have any idea what is happening and how to resolve ?
Thanks for this nicely put question. I have a similar issue with a much different setup. I'm on Win7, using UIAutomationCore.dll directly from C# to test our application-under-development. After running my sequence of actions & event subscriptions and all the other things, I intermittently observe that the UIA interface stops working (about 8-10min in my case, but I'm heavily using the UIA interface).
Many different things including dispatching the COM interface, sleeping at different places failed. The funny revelation was I managed to use the AccEvent.exe (part of SDK like inspect.exe) during the test and saw that events also stopped flowing to AccEvent, too. So it wasn't my client's interface that stopped, but it was rather the COM-server (or whatever the UIAutomationCore does) that stopped responding.
As a solution (that seems to work most of the time - or improve the situation a lot), I decided I should give the application-under-test some breathing point, since using the UIA puts additional load on it. This could be a smartly-put sleep points in your client, but instead of sleeping a set time, I'm monitoring the processor load of the application and waiting until it settles down.
One of the intermittent errors I receive when the problem manifests itself is "... was unable to call any of the subscribers..", and my search resulted in an msdn page saying they have improved things on CUIAutomation8 interface, but as this is Windows8 specific, I didn't have the chance to try that yet.
I should also add that I also reduced the number of calls to UIA by incorporating more ui caching (FindAllBuildCache), as the less the frequency of back-and-forth the better it is for the uia. Thanks to the answer of Guy in another question: UI Automation events stop being received after a while monitoring an application and then restart after some time
Long polling has solved 99% of my problems. There is now just one other problem. Imagine a penny auction site, where people bid. On the frontpage, there are several Auctions.
If the user opens three of these auctions, and because javascript is not multithreaded, how would you get the other pages to ever load? Won't they always get bogged down and not load because they are waiting for long polling to end? In practice, I've experienced this and I can't think of a way around it. Any ideas?
There are two ways that javascript gets around some of this.
While javascript is single threaded conceptually, it does its io in separate threads using completion handlers. This means other pieces of javascript can be running while you are waiting for your network request to complete.
Javascript for each page (or even each frame in each page) is isolated from Javascript on the other pages/frames. This means that each copy of javascript can be running in its own thread.
A bigger issue for you is likely to be that browsers often limit the number of concurrent connections to a given site, and it sounds like you want to make many concurrent connections to the same site. In this case you will get a lock up.
If you control both the sever and client, you will need to combined the multiple long-poll request from the client into a single long-poll request to the server.
I'm making a mobile client for a web site now. And information exchange between my app and server is in JSON (searching users and data on server,sending messages, conversation threading, etc.) But all these features work too slow. I click on the button "send" and then wait for some second before the message will be sent, the same thing with searching, authorization, etc. So I have such a questions:
1. Why it's such a performance overhead?
2. Can it be troubles with the server side or it's JSON parser troubles or may be something else?
3. How can i fix/optimize this? All solutions, advices etc. will be helpful!
I would use Xcode to debug the app to see whether the majority of time is spent loading the data from the server or parsing the JSON once the data is received.
If it is the first, try loading the data from a PC over the same wireless connection and see if it is slow on that too. If so, clearly your server side code needs optimising.
If it is the second and the parsing is slow, you may want to look into using JSONKit instead of the native JSON parser as testing shows it is faster. You may also want to review the structure of your JSON.
One thing I have noticed however is that connections are slower on my iPad than on other machines. I've noticed this when comparing apps I've developed in the simulator to on the device on the same network and when conducting speedtests. As for why this happens, I am not sure - some form of additional overhead in iOS perhaps.
I can save you some time - it has nothing to do with JSON. It has to do with how the your app handles requests in general. It obviously needs optimization on the server.
EDIT:
I suppose it could also be that you might be experiencing high-latency on your phone, but again, that has nothing to do with your app.
Debug it using a regular browser and chrome dev tools (in the network tab) - you'll see that the requests take long even on a desktop at which point you'll have to start fishing around in the server-side code to see what's making it go slow (hint: unoptimized database queries are a big bottleneck....but then again, so is crappy hardware).
Sorry that I couldn't be of more help, but without seeing the entire setup of the server and the code that's going slow (not the client requests, but the server code), that's the best I can do.
Best of luck.
I have rewritten web application from using mod_python to using mod_wsgi. Problem is that now it takes at least 15 seconds before any request is served (firebug hints that almost all of this time is spent by receiving data). Before the rewrite it took less than 1 second. I’m using werkzeug for app development and apache as a server. Server load seems to be minimal and same goes for memory usage. I’m using apache2-mpm-prefork.
I’m using the default setting for mod_wsgi - I think it’s called the ‘embedded mode’.
I have tested if switching to apache2-mpm-worker would help but it didn’t.
Judging from app log it seems that app is done with request quite fast - less than 1 second.
I have changed the apache logging to debug, but I can’t see anything suspicious.
I have moved the app to run on a different machine but it was all the same.
Thank in advance for any help.
Sounds a bit like your response content length doesn't match how much data you are actually sending back, with content length returned being longer. Thus browser waits for more data until possibly times out.
Use something like:
http://code.google.com/p/modwsgi/wiki/DebuggingTechniques#Tracking_Request_and_Response
to verify what data is being sent back and that things like content length match.
Otherwise it is impossible to guess what issue is if you aren't showing small self contained example of code illustrating problem.