I have a web app and trying to host it on Heroku. I also bought the domain name on name.com. Everything works locally just fine. It also works with URL "app.herokuapp.com." But when I add DNS mapping, enable SSL, and try to go by my link, I have an error that IP is not found. Can anybody say what I did wrong?
UPD: Okay, I did everything one more time, and now it works, but only with HTTP, even though I enabled automatic SSL.
Screenshot:
Thanks a lot. I managed to solve my problem. I don`t know where the issue was, but I just removed all records from DNS in Heroku settings and added it one more time. And added default SSL support. Everything works.
I'm trying to set up https on my backend app on heroku as a subdomain like this (for example):
https://api.mydomain.com
and I'm really confused by all the conflicting online docs I've found. Also, I'm rather green on all this SSL stuff. This app will be a backend for just data serving. My front end right now is https on OpenShift under my domain and it's working fine. Here is what I've done:
I have a "hobby" dyno ($7/month) on my heroku app, which I read that I need to
enable this stuff.
I have a cloudflare account which serves up my domain for the openshift front-end on https.
I bought my domain from GoDaddy -- so right now it simply points to the cloudflare name servers.
I setup the subdomain: api.mydomain.com on heroku (settings tab). It came back and said that my "DNS Target" is api.mydomain.com.herokudns.com. It also says "Domain: Your app can be found at http://api.mydomain.com".
I clicked "Configure SSL" > "Automatically configure using Automated Certificate Management" and it comes back saying to:
"update your DNS settings to our secure domain"
Not really sure what that means, to be honest. I tried to go back to cloudflare and add a DNS Record (DNS tab). Like so:
Type: CNAME
Name: api <--is this right?
Value: api.mydomain.com.herokudns.com <-- what do I put here?
But this doesn't work. How do I know? I type
heroku certs:auto and it comes back 'failing'. Also tried value: mydomain.com.herokudns.com without the 'api' in front. I'm really confused and the docs aren't much help. Can anybody help me?
I have found a simpler solution. The fix was mentionned in Cloudflare's tutorial.
The trick is to take your standard heroku app address (ex: myapp.herokuapp.com) INSTEAD of the xxx.herokudns.com displayed in heroku's SSL interface
Then, to make your custom subdomain (ex: api.foodomain.com) point to it, simply add a CNAME record in Cloudflare's DNS
CNAME api myapp.herokuapp.com
And it should work (it did for my case).
OK, in case some other poor tired programmer comes here.
Cloudflare and Heroku don't get along. Use your SSL from cloudflare. Here's how:
disable automatic certification on heroku: heroku
certs:auto:disable
Delete your domain on heroku and start over
Add the (sub) domain again on heroku
type heroku domains to see what the REAL domain is now -- without ACM enabled it will probably go back to ...herokuapp.com instead of ...herokudns.com
Set that one up in cloudflare (DNS tab) under CNAME like so:
CNAME | yoursubdomainname | yourdomainname.com.herokuapp.com
set up Page Rules in cloudflare to be like so:
http://yourdomainname.com/ => Always use https
on Crypto tab use Full SSL.
Wait an hour or so to make sure these all take effect.
Hope that helps someone.
I am trying to set custom domain for my Firebase app.
Firebase hosted url : https://inventory-app-726af.firebaseapp.com/
Custom Domain: inv.agsft.com
I have followed all instructions as part of setting custom domain but after verification step when I click on finish button, status will always be "Needs Setup".
I am managing DNS through cloudflare (https://www.cloudflare.com/) and I am following Quick setup option.
Any pointers to resolve it?
I had the same problem, I was able to resolve it by toggling the DNS Status on cloudflare from DNS and HTTP Proxy (CDN) to just DNS on the two A records
It started working right away.
The proper solution, ie without disabling Cloudflare for the site, is to use Full SSL for your domain/subdomain.
You can either choose Full SSL for all your domain entries, or set up a Page Rule for a specific subdomain, in your case, use "inv.agsft.com/*"
Source: https://community.cloudflare.com/t/flexible-ssl-redirect-loop-with-google-firebase/2063/3, which in turn points to https://support.cloudflare.com/hc/en-us/articles/115000219871-Why-does-Flexible-SSL-cause-a-redirect-loop-
Had the same issue and this solved the redirect issue. Firebase will however still report the domain as "Needs setup", for that I have no solution, but it does not affect the functionality of the hosting.
For the people that is using Namecheap, This configuration worked for me.
To avoid any kind of ssl issues when using firebase hosting and cloudflare you have to check to following points:
You don't need to toggling the DNS Status on cloudflare from DNS and HTTP Proxy (CDN) to just DNS on the two A records unless you don't want the cloudflare ssl certificates and want to just use the firebase ssl certificates (look to this carefully because you will loose the protection that cloudflare provides to your site in case you decide to use only the clouflare DNS)
If you "keep the cloud orange" it will not causes any problem to your firebase hosting.
Add the firebase IP's to cloudflare following the instructions provided by firebase hosting and remove any other A record from your domain/subdomain that you are setting up
To ensure you have a end-to-end encryption (using both firebase ssl as well as cloudflare ssl), make sure that your cloudflare crypto options is set to "Full":
Use a page rule likes in case that you want your root domain to receive all trafic:
In your firebase hosting setup, do the same:
p.s: Look that the message "Needs setup" is still there but the app is running without any problem.
p.s2: the majority problems regarding cloudflare and firebase is that firebase ssl can take several hours to start to work and you keep seeing a message like "your connection is not private". It happens not beucase cloudflare is messing our proxy out but because firebase ssl is still not fully propagated.
I hope it help others :)
In my case I did the same that Brennen did:
toggling the DNS Status on cloudflare from DNS and HTTP Proxy (CDN) to just DNS on the two A records.
But just start working when I:
Delete the domain from firebase. (click on the : points select delete domain)
refresh the firebase site
Added again in Quick Setup. I already had the A record added in Cloudflare so I didn't added again.
After that automatically the status added was connected.
Remember: Before testing, clean your browser cache.
When I run dig -t txt +noall +answer inv.agsft.com there are no TXT records showing. Since those are required to verify your ownership of the domain, Firebase Hosting will not continue the setup beyond step one.
Update: since the next step requires you to map A records to the IP addresses of Firebase hosting, I ran the relevant dig too:
$ dig -t a +noall +answer inv.agsft.com
inv.agsft.com. 299 IN A 104.18.56.240
inv.agsft.com. 299 IN A 104.18.57.240
Those are not the addresses I'd expect for Firebase Hosting, so it looks like either you haven't correctly entered the A records, or they have't propagated yet.
When I change my setting like below, it started to work again.
Redirect loop fixed:
For GoDaddy this adding the following solved it for me:
TYPE:A
NAME:#
VALUE: your ip_1
TYPE:A
NAME:#
VALUE: your ip_2
June 2020
Just wanted to share what was successful for me. It was a combination Brennen and Lisbel's answer.
Step 1: Toggle off your DNS status to get a grey cloud (as shown in the earlier answer)
Step 2: Delete the domain from firebase
Step 3: Add it back with Quick Steup
It should be connected after these steps!
I had the same issue. Here's how I fixed it:
1) Cick the View button on the problematic domain (in the Hosting section next to where it says Needs Setup).
2) Change the 'Setup mode' from Quick Setup to Advanced and follow the 3 steps
2a) Open your domain provider's settings (I'm using Google Domains) and add the TXT record it's giving you.
2b) Wait about 4-12 hours for verification
2c) Add the provided A records into your domain provider's settings
This is not a quick process, but it should be working about 5 minutes after you complete step 2c.
Toggling DNS mode didn't work for me. So I tried following approach and it worked for me.
Add CNAME record pointing to {firebase-project}.firebaseapp.com or {firebase-project}.web.app, you could add A record and try.
ADD TXT record as firebase ask you
Verify from firebase (this will show as needs setup, also it didn't go away although this worked)
If new domain/subdomain doesn't works check your browser developer tools network tab. If there are lots of 301 happening then go to cloudflare page rules. Add newdomain.com/* or subdomain.newdomain.com/* then add settings select SSL and set it to full as follows.
Then it will work as expected.
Working as of 11st May 2022 without need to toggle DNS and HTTP Proxy (CDN).
Steps:
Go to Cloudflare Dashboard.
Select SSL/TLS.
Select Overview.
Select Full option for SSL/TLS encryption mode.
After that, refresh your website that previously have issue to access.
Now the website can access successfully.
I've just installed Sylius to test it for possible production use and integrated Paypal through the payum-gateway.
I'm running Sylius with the included webserver on 127.0.0.1:8080 through a nginx reverse SSL proxy for security reasons and so that it is accessible through a regular URI.
After the PayPal-Payment, I'm forwarded back to the page as it should but instead of the origin-page it sends to 127.0.0.1:8080.
The "Show Shop"-link from the admin-menu did this as well until I changed the server name in the "channel settings".
I figured I have to set the public hostname somewhere else, too, but I cannot figure out where I have to do so.
Grepping for '127.0.0.1' yields a lot of results. For example vendor/sensio/distribution-bundle/Resources/skeleton/web/config.php, but that doesn't seem to be the right place.
I don't know the answer to the original question so I won't delete it in case someone else wants to answer.
I solved this specific problem by not using nginx as a proxy but as the webserver itself and deacitivating the webserver that is shipped with Sylius.
So I have managed it. I can clone mercurial-repositories remotely using HTTP to my Windows Server 2003 machine and the ipaddress from that machine. Although I did deactivate IIS6 and am using Apache 2.2.x now. But not all works right now...darn! Here's the thing:
Cloning goes smooth! But when I want to push my changes to the original repository I get the message "cannot lock static http-repository". On the internet I get to read several explanations that Mercurial wasn't designed to push over HTTP connections. Still, on the Mercurial website there's something about configuring an hgrc file.
There's also the possibilty to configure Apache to host via HTTPS (or SSL). For this you have to load the module enabling OpenSSL and generating keys.
Configuring the hgrc file
Just add "push_ssl = false" under the [web] line. But where to put this file when pushing your changes back?! Because I placed it in the root of the server, in the ".hg" directory, nothing works.
Using SSL/HTTPS with Apache
When I try to access 'https://myipaddress' it fails, displaying a dutch message which would mean something like "server taking too long to respond". Trying to push also gives me a dutch error message which means about the same. It can not connect to my server via https although I followed the steps exactly at this blog.
I don't care which of the above solutions will work for me. Turns out none of them work so far. So please, can anyone help me with one of the solutions above? Pick the easiest! Help will be greatly appreciated, not only from me.
Summary
-Windows Server 2003
-Apache 2.2 with OpenSSL
-Mercurial 1.8.2
-I can clone, but not push!
Thank you!
Maarten Baar(s)
It seems like you might have apache configured incorrectly for getting it to do what you want. Based on your question it sounds like you have a path (maybe the root of the server) pointing to the repository you want to serve.
Mercurial comes with a script for this exact purpose, in the latest version it is hgweb.cgi. There are reasonably good instructions for setting it up on the mercurial site. It should allow both cloning and pushing. You will need the push_ssl=false if you will not be configuring https and also an allow_push line which will let certain users, or all (*) push to the repository. But all that should be part of the setup docs.