I just got finished creating a VM in Azure and called it vm123. I was trying to use that VM when creating my SQL Server.
When I create a SQL Database in Azure, it forces me to either create a server or pick one from dropdown.
Why can't I see my vm123 in the list?
I can create a new one alright, which is what I did, since my VM did not appear in the dropdown. How do I remote into it?
See screenshots...
You are confusing VM with the Database server, the one asked in the dropdown is a SQL server not a VM. Those two are two different services on Azure.
To fix this create a SQL server resource first and you should be able to see that in the dropdown when you create the database.
Azure SQL Database is a managed service and the underlying infrastructure is shared across tenants.
If you really need access to the host then you'll need to choose from one of the following:
Create a SQL Server VM (includes licensing but at a higher operational cost)
Create a Windows Server VM and install a SQL instance on it. You must license it yourself accordingly.
Related
I am working on a project with a friend and he has deployed a SQL Server database. He uses a PC and can access the database using Microsoft SQL Server Management Studio (SSMS).
However I have a Macbook with an M1 chip and so I cannot use SSMS and need to figure out which SQL Server application I want.
It seems like the way to go is Microsoft Azure Data Studio. I cannot figure out how to connect properly, I have looked at several solutions posted online which all say to download docker, download the latest SQL Server image, use SQL edge, run SQL Server in a container and then open Azure and connect.
One caveat is that all these tutorials end with creating a SQL Server on the local host rather than connecting to an existing one.
In Azure, after entering server id, username and password, there is a green dot on the label of the DB on the left drop down menu, indicating that the connection to the DB was successful. However whenever I try to view the DB's from the drop down it loads and then errors:
Object Explorer task didn't complete within 45 seconds
and I cannot run any basic queries either.
At this point I don't care what IDE I use as long as it works. Any advice is much appreciated. It seems like this task should be super easy but has given me such a hard time and we cannot continue working on the project until I get access.
Anyways, thanks again in advance! and lmk if there's any other info I should provide.
Tried using docker with Azure Data Studio and my results were the same as when I only used Azure.
You'll want to use Azure Data Studio.
You don't need Docker at all to meet your goals. Those tutorials were in regards to running your own SQL Server instance on a Mac. You're trying to connect to an existing instance.
As mentioned in the comments, where is the existing SQL Server instance located?...is it on a server that's part of a domain. Is your Mac part of that same domain? It sounds like you're getting some kind of timeout issue or some sort of authentication issue. So this is more of an infrastructure question.
Once connected to the SQL Server instance in Azure Data Studio, what happens if you just open a blank worksheet and run the query SELECT ##SERVERNAME?
Requirement: I wanted to copy data from a specific table/view residing on a on-premise SQL Server to Azure SQL DB.
Infrastructure: As depicted in below picture. Essentially, the Azure network is directly connected with corporate network over Express Route. Thus it's a pure private network connection; as good as the corporate network itself.
Issue/Question: I know there are multiple approaches present to get this operation done and I am not restricted to use ADF copy Data tool only. BUT, for all of these I see some cavets or extra steps needed to be done as below:
ADF Copy Data Tool: Needs a SH-IR and a small MSI package needs to be installed on on-premise machine which hosts the SQL server for registration purpose.
Logic Apps: Needs a Virtual Gateway (OR) ASE
App Service: If the operation is wrapped in a C# application and I choose to deploy to a Azure Web Apps. Then in-order to connect to on-premise SQL Server we need to setup hybrid connection manager and as in #1 we need to install something in on-premise machine.
For my case, none of these extra steps can be done. essentially, the on-premise SQL Server comes under a different BU and thus I don't have any permission there; except they have given grant to a table/view. Thus, none of these extra shitty steps can be done.
Moreover, as mentioned above; since it's connected over express route as direct connection, As can be seen in above picture, both the on-premise and azure SQL are essentially inside the same corporate network. THUS, I should be able to access them directly without configuring any of these extra steps as mentioned above.
Please confirm on these and provide a suggestion.
Thank You.
You can still go with the ADF scenario without a SHIR by creating ADF in a Managed VNET using Private Endpoint. As you already have an ER circuit and have the flexibility to configure the Azure side, can you do this with Azure IR: Access on-premises SQL Server from Data Factory Managed VNet using Private Endpoint - Azure Data Factory | Microsoft Docs
There are 2 solutions which could work for your scenario but even for them to work ,you would need access to on prem SQL server machine access to some extent atleast for one time config and Azure SQL db should be accessible via SSMS installed on on-prem machine.
Using linked server
You can create a linked server ( process explained here https://www.sqlshack.com/create-linked-server-azure-sql-database/ ) on on-prem server and create a agent server job to insert data to azure SQL db table.
Via Python Script
This would need Python installation on on-prem machine. Once installed you can write script to transfer data between on-prem SQL server and Azure SQL db. You can schedule this script again by using an agent server job.
I am looking to create a database server that can be used to store data using a VB.net application. When I initially installed SQL Server 2005 Express edition, I believe I installed this using the LocalDB option.
As it stands my application is a simple tool which utilises the Process.Start command under certain situations, depending on user input, to launch Game Servers for use at a gaming LAN I assist in running.
I wish to progress the application by being able to update, delete and query a database created in SQL Server 2005 Express. I understand the use of connection strings etc, however I am wondering if the installation using LocalDB will mean that I cannot connect to the server to process the data I require.
Can I continue to use the LocalDB option and create a Database Server for specific use using my application or is a different installation option required?
Secondly, can someone point me in the right direction of how to create a new Server for this purpose? All of my searches so far have provided results for creating a database only, and not the server.
I have a couple questions about what you are trying to do.
First, why are you installing SQL Server 2005? It was released almost a decade ago.
I would go with 2012 express edition.
http://www.microsoft.com/en-us/download/details.aspx?id=29062
Second, install the management tools. SSMS is a nice GUI to do work in.
Third, If you are spinning up anything other than express, there are licensing costs which are quite high. 9K for standard and 25K for enterprise per socket or such.
Here are the versions and features list from microsoft.
http://technet.microsoft.com/en-us/library/ms144275.aspx
Last but not least, having the express edition on another computer is fine. However, you will have to use a network protocol such as TCP/IP instead of shared memory.
It will take longer to send Tabular Data Stream (TDS) to the other computer versus talking to memory on the same computer.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/c4f06669-41fd-42e6-b4a9-564cf04ca9f7/how-to-choose-between-shared-memory-named-pipes-tcpip-via?forum=sqlgetstarted
Good luck with your project.
You can use a local instance of SQL Server just fine, if you want to set up a separate server for some reason then you'll need either a 2nd machine on which to install SQL Server, or to spin up a virtual machine. If running Windows 8 (and barring hardware limitations) you have Hyper-V at your fingertips.
This is not a complete answer for you but may give you some things to think about.
First you might want to think about your choice of database. If you don't have a compelling reason for using 2005 you will probably at least want to move to SQL Express 2008.
Second, to answer the part about creating a server... A server is something that serves data. In a general sense a computer configured to be contacted by external machines and respond with data is a server. A web server runs a program like IIS or Apache to respond with web pages. A database server contains a database and allows connections to that database. So as long as you install the database on a computer and configure it to allow external connections, you have your database server.
In MS SQL there are several things that need to be set up to allow a database to accept external connections. One is that the SQL Server Browser service will need to be active. Another is that the database itself will need to be configured to allow external connections (SQL Authentication type probably).
Hope this helps.
Addition:
SQL Remote Connection Configuration
Disclaimer, I don't have SQL Express 2005 installed but I think the settings are found in the same place in 2008. If the info here is not exact to SQL Express 2005, the general terminology used here should be enough to get you headed in the right direction to find the specifics.
While viewing the database in Server Management Studio or Enterprise Manager, right click the database server instance name (the root of the tree) and select properties. There should be a section title Connections and within this section there should be an option "Allow remote connections to this server". Make sure it is checked. The other setting you need in this properties menu is under the security area. There is a radio button for "Windows Authentication Mode" and "SQL Server and Windows Authentication Mode", you want the second that allows both.
The next step you have may be to create a new user, add a password, and connect the user to the database. That will give you the credentials you will use in your database connection string while programming. I usually add new users through the security section of the database then set the User Roles for each database that I need to connect to. It is good practice to limit the permissions to those needed by the application. Typically this is read and write, but sometimes you can get away with just read. The less the better.
I have a powercenter 9.1 installation on windows server 2008 R2.
The repository is on the same box, hosted on sql server 2012. I have configured a new user (with sql server authentication) and have the repo db owned by that user. (it has the owner role)
The core problem : I am not able to run a simple test workflow on this setup.
Here's what I have been trying
The windows firewall has been taken down now for about an hour or so.
The repository service and integration service are running in trace/debug mode respectively.
The integration service log complains that it cant find a certain session for a certain workflow in certain folder (with ids for all of them).
When I log into sql server mgmt console, and try to query the repository tables for those exact items (since i have the ids from logs), all the data is present...
I fail to understand what is that I am messing up...
Disclaimer - my knowledge of sql server is really low.. may be 1 or 2 on scale of 10, since I have been living on the other side of fence (with oracle) for all of my career...
Did you try keeping the sql server login/user name and the associated default schema name as same?
I had a SharePoint server, now i want to move this from one machine to another machine.
This is what i did for the migration.
I have just installed sharepoint server in my new machine and i have removed the Sharepoint_config and wss_content databased from the new server. and i have restored both the databases from the old server. Then i tried to run the Central Admin and i got Unable to connect to content database error.
Is replacing the DB is wrong. is there any other way to migrate SP server from one machine to another. I have tried my taking Farm backup and restore i had many problem with that. so i feel replacing DB would be better for me. any suggestions please?
Move SharePoint between servers is a huge effort.
Data in databases are very depends on the SharePoint install and its environments. So, I suggest just re-install the SharePoint on the new server, and then restore site collection backups to the new install.
Install SharePoint Server on the new server machine
Backup site collections from the old server, follow this guide: http://technet.microsoft.com/en-us/library/cc263441(v=office.12).aspx
Create Web Applications on the new server
Restore site collections from the prev. backups, follow this guide: http://technet.microsoft.com/en-us/library/cc262087(v=office.12).aspx
Be aware, if you have farm level customize solutions (developed by Visual Studio) or css files deployed in the LAYOUT folder, don't forget to re-deploy them on the new server.
I guess this question is too old and my answer will not help topicstarter... However, I was looking to refresh my own knowledge on this topic and I feel it will be useful to share it here.
This solution is not good for every SharePoint deployments, of course, it's just a general idea.
And I don't think it suits production environments well... but if you are brave and foolish as myself, you can do it there as well, with some additional precautions like backups and so on.
Here are prerequisites:
SharePoint was initially installed in Farm mode (not in Single Server mode)
Both old and new servers are in the same domain
You know Farm Passphrase used for initial installation
Old server is still intact and accessible from the new server
Steps to do
Skip steps 2-6 if you don't want to move databases to new location
Install SharePoint on the new server and join to existing farm. See
https://technet.microsoft.com/en-us/library/cc261752.aspx for details on joining procedure.
Ensure that the SharePoint is read-only. You can just shut down MS SQL DBEngine service if it's ok for your users.
Install MSSQL Server on the new server or other location you want. Remember, that it's not a good idea to keep SharePoint and MSSQL on the same server if it's not a demo/dev environment
Move all SharePoint databases to the new MSSQL Server. You can simply copy all DB files and attach it to the new SQL, or go full backup and restore way.
Important: Create an SQL client alias on the new server with cliconfg tool. See blogs.msdn.com/b/priyo/archive/2013/09/13/sql-alias-for-sharepoint.aspx for details.
Use your old SQL instance name as alias name. E.g. if your old server had SQL installed alongside with SharePoint on SharePoint.mydomain.com, alias name should be "SharePoint.mydomain.com"
Set Server name for alias to the new SQL location. Something like "NewServer.mydomain.com"
Ensure that you specify correct port number for SQL connection or configure network for default dynamic port. It is not necessary only if you have local SQL server on the same machine.
Create identical SQL client alias on the old server (this is needed to correctly remove old server from farm)
Remove old server from the farm. See this technet article for details
Update DNS settings or whatever you use to point users to the new server.
That's it. Hope it will help someone