32/64 bit WiX Combined Installer-Copying files only - wix

Question

I have an msi that copies files (PLC Code) to a directory(C:\Product\3.1\Boot), and modifies one key.
My visual studio project generates different PLC Code for the different architectures, but the destination is the same on both platforms. They key is in a different spot.
I have looked at using the arch-switch and conditional statements, but these look to only detect the architecture on which it is compiled, and not where the msi is run.
I know that you cant have 32/64 in the same MSI, but I'm not doing anything other than copying files and changing registries. I'm not putting anything in the windows directories/program files.
Though I would like it to appear with a version in the list of programs.
Is it possible in this case to have one installer?
Code
'''
<Product Id="*"
Name="Company"
Language="1033"
Version="4.09"
Manufacturer="CompanyInc."
UpgradeCode="YOUR_GUID"
>
<Package Id ="*"
InstallerVersion="200"
InstallPrivileges="elevated"
Compressed="yes"
InstallScope="perMachine"
Description="Company PLC Code"
Manufacturer="CompanyInc."
Keywords="PLC"
Comments="F"
/>
<!--Upgrade/install control-->
<MajorUpgrade
AllowDowngrades="yes"
/>
<!--GUI for install display-->
<UI>
<UIRef Id="WixUI_Minimal" /> <!--Define type of UI -->
</UI>
<Upgrade Id="GUID_HERE">
<UpgradeVersion OnlyDetect="no"
Property="SELFFOUND"
Minimum="1.0"
/>
</Upgrade>
<MediaTemplate EmbedCab="yes" />
<!-- Set the icon used in the programs and features list-->
<Icon Id='ProductIcon' SourceFile='Company.ico' />
<Property Id='ARPPRODUCTICON' Value='ProductIcon' />
<!-- Things to install-->
<Feature Id="Default" Title="PLC Code" Level="1">
<ComponentGroupRef Id="ProductComponentsx64" />
</Feature>
<Directory Id="TARGETDIR" Name="SourceDir">
<Directory Id="ProgramFilesFolder">
<Directory Id="INSTALLFOLDER" Name="Company PLC" />
<Directory Id="BOOTDIR" />
<Directory Id="PLCDIR" />
</Directory>
</Directory>
<SetDirectory Id="BOOTDIR" Value="C:\CompanySoftware\3.1\Boot" />
<SetDirectory Id="PLCDIR" Value="C:\CompanySoftware\3.1\Boot\Plc" />
<!--Specify when actions occur actions during install-->
<InstallExecuteSequence>
<Custom Action="ARCHIVEBOOTDIR" After ="CostFinalize" />
<!--ToDo: copy files-->
</InstallExecuteSequence>
</Product>
<Fragment>
<!--64 bit systems: Place files in appropriate directories and modify registry key for Company to autostart -->
<ComponentGroup Id="ProductComponentsx64">
<Component Id="BootComponents" Guid="" Directory="BOOTDIR">
<File Id="CurrentConfig.xml" Source="..\_Boot\CompanySoftware RT (x64)\CurrentConfig.xml" KeyPath="no" />
</Component>
<Component Id="PLCComponent" Guid="" Directory="PLCDIR">
<File Id="Port_851.app" Source="..\_Boot\CompanySoftware RT (x64)\Plc\Port_851.app" KeyPath="no" />
<File Id="Port_851.autostart" Source="..\_Boot\CompanySoftware RT (x64)\Plc\Port_851.autostart" KeyPath="no" />
<File Id="Port_851.cid" Source="..\_Boot\CompanySoftware RT (x64)\Plc\Port_851.cid" KeyPath="no" />
<File Id="Port_851.crc" Source="..\_Boot\CompanySoftware RT (x64)\Plc\Port_851.crc" KeyPath="no" />
<File Id="Port_851.occ" Source="..\_Boot\CompanySoftware RT (x64)\Plc\Port_851.occ" KeyPath="no" />
<File Id="Port_851.ocm" Source="..\_Boot\CompanySoftware RT (x64)\Plc\Port_851.ocm" KeyPath="no" />
<File Id="Port_851_boot.tizip" Source="..\_Boot\CompanySoftware RT (x64)\Plc\Port_851_boot.tizip" KeyPath="no" />
</Component>
<Component Id="StartupReg" Guid="" Directory="TARGETDIR">
<RegistryKey Root="HKLM"
Key="Software\WOW6432Node\Company\CompanySoftware3\System">
<RegistryValue Name="SysStartupState"
Type="integer"
Value ="5"/>
</RegistryKey>
</Component>
</ComponentGroup>
</Fragment>
<Fragment>
<!--32 bit systems: Place files in appropriate directories and modify registry key for Company to autostart -->
<ComponentGroup Id="ProductComponentsx86">
<Component Id="BootComponents" Guid="" Directory="BOOTDIR">
<File Id="CurrentConfig.xml" Source="..\_Boot\CompanySoftware RT (x86)\CurrentConfig.xml" KeyPath="no" />
<File Id="Company.ico" Source="Company.ico" KeyPath="no" />
</Component>
<Component Id="PLCComponent" Guid="" Directory="PLCDIR">
<File Id="Port_851.app" Source="..\_Boot\CompanySoftware RT (x86)\Plc\Port_851.app" KeyPath="no" />
<File Id="Port_851.autostart" Source="..\_Boot\CompanySoftware RT (x86)\Plc\Port_851.autostart" KeyPath="no" />
<File Id="Port_851.cid" Source="..\_Boot\CompanySoftware RT (x86)\Plc\Port_851.cid" KeyPath="no" />
<File Id="Port_851.crc" Source="..\_Boot\CompanySoftware RT (x86)\Plc\Port_851.crc" KeyPath="no" />
<File Id="Port_851.occ" Source="..\_Boot\CompanySoftware RT (x86)\Plc\Port_851.occ" KeyPath="no" />
<File Id="Port_851.ocm" Source="..\_Boot\CompanySoftware RT (x86)\Plc\Port_851.ocm" KeyPath="no" />
<File Id="Port_851_boot.tizip" Source="..\_Boot\CompanySoftware RT (x86)\Plc\Port_851_boot.tizip" KeyPath="no" />
</Component>
<Component Id="StartupReg" Guid="" Directory="TARGETDIR">
<RegistryKey Root="HKLM"
Key="Software\Company\CompanySoftware3\System">
<RegistryValue Name="SysStartupState"
Type="integer"
Value ="5"/>
</RegistryKey>
</Component>
</ComponentGroup>
</Fragment>
'''

Answer 1

I was able to figure out how to get this to work. By using the Condition and ![CDATA[NOT(VersionNT64)]] to detect the version I was able to perform different actions!
<Product Id="*"
Name="Company PLC"
Language="1033"
Version="4.09"
Manufacturer="Company Inc."
UpgradeCode="Code"
>
<Package Id ="*"
InstallerVersion="200"
InstallPrivileges="elevated"
Compressed="yes"
InstallScope="perMachine"
Description="Company CompanySoftware PLC Code"
Manufacturer="Company Inc."
Keywords="PLC"
Comments="Company "
/>
<!--Upgrade/install control-->
<MajorUpgrade
AllowDowngrades="yes"
/>
<!--GUI for install display-->
<!-- future use for custom graphics on the MSI pages
<WixVariable Id="WixUIBannerBmp" Value="CompanyWixUIBanner.bmp" />
<WixVariable Id="WixUIDialogBmp" Value="CompanyWixUIBanner.bmp" />
-->
<UI>
<UIRef Id="WixUI_Minimal" />
<!--Define type of UI -->
</UI>
<Upgrade Id="CODE">
<UpgradeVersion OnlyDetect="no"
Property="SELFFOUND"
Minimum="1.0"
/>
</Upgrade>
<MediaTemplate EmbedCab="yes" />
<!-- Set the icon used in the Windows programs and features list-->
<Icon Id='ProductIcon' SourceFile='Company.ico' />
<Property Id='ARPPRODUCTICON' Value='ProductIcon' />
<!-- Things to install- This would normally appear as the selectable list of items to install in a regular installer-->
<Feature Id="Default_x64" Title="PLC Code x64" Level="1">
<Condition Level ="1">
<![CDATA[(VersionNT64)]]>
</Condition>
<ComponentGroupRef Id="ProductComponentsx64" />
</Feature>
<Feature Id="Default_x86" Title="PLC Code x86" Level="1">
<Condition Level ="1">
<![CDATA[NOT(VersionNT64)]]>
</Condition>
<ComponentGroupRef Id="ProductComponentsx86" />
</Feature>
<Directory Id="TARGETDIR" Name="SourceDir">
<Directory Id="ProgramFilesFolder">
<Directory Id="INSTALLFOLDER" Name="Company PLC" />
<Directory Id="BOOTDIR" />
<Directory Id="PLCDIR" />
</Directory>
</Directory>
<SetDirectory Id="BOOTDIR" Value="C:\CompanySoftware\3.1\Boot" />
<SetDirectory Id="PLCDIR" Value="C:\CompanySoftware\3.1\Boot\Plc" />
</Product>
<Fragment>
<!--64 bit systems: Place files in appropriate directories and modify registry key for Company to autostart -->
<ComponentGroup Id="ProductComponentsx64">
<Component Id="BootComponentsx64" Guid="" Directory="BOOTDIR">
<Condition>
<![CDATA[(VersionNT64)]]>
</Condition>
<File Id="CurrentConfig.xml.x64" Source="..\_Boot\CompanySoftware RT (x64)\CurrentConfig.xml" KeyPath="no" />
</Component>
<Component Id="PLCComponent.x64" Guid="" Directory="PLCDIR">
<Condition>
<![CDATA[(VersionNT64)]]>
</Condition>
<File Id="Port_851.app.x64" Source="..\_Boot\CompanySoftware RT (x64)\Plc\Port_851.app" KeyPath="no" />
</Component>
<Component Id="StartupReg.x64" Guid="" Directory="TARGETDIR">
<Condition>
<![CDATA[(VersionNT64)]]>
</Condition>
<RegistryKey Root="HKLM"
Key="Software\WOW6432Node\Company\CompanySoftware\System">
<RegistryValue Name="SysStartupState"
Type="integer"
Value ="5"/>
</RegistryKey>
</Component>
</ComponentGroup>
</Fragment>
<Fragment>
<!--32 bit systems: Place files in appropriate directories and modify registry key for Company to autostart -->
<ComponentGroup Id="ProductComponentsx86">
<Component Id="BootComponentsx86" Guid="" Directory="BOOTDIR">
<Condition>
<![CDATA[NOT(VersionNT64)]]>
</Condition>
<File Id="CurrentConfig.xml.x86" Source="..\_Boot\CompanySoftware RT (x86)\CurrentConfig.xml" KeyPath="no" />
</Component>
<Component Id="PLCComponentx86" Guid="" Directory="PLCDIR">
<Condition>
<![CDATA[NOT(VersionNT64)]]>
</Condition>
<File Id="Port_851.app.x86" Source="..\_Boot\CompanySoftware RT (x86)\Plc\Port_851.app" KeyPath="no" />
</Component>
<Component Id="StartupReg.x86" Guid="" Directory="TARGETDIR">
<Condition>
<![CDATA[NOT(VersionNT64)]]>
</Condition>
<RegistryKey Root="HKLM"
Key="Software\Company\CompanySoftware\System">
<RegistryValue Name="SysStartupState"
Type="integer"
Value ="5"/>
</RegistryKey>
</Component>
</ComponentGroup>
</Fragment>