I'm having problems finding any information on how to scale RabbitMQ consumers, specifically, how to work with multiple instances of the same component.
Say I have two components; A and B. I have three instances of each component set up as an HA cluster. Let's say A.1 sends a message with a key which matches B. I only want one instance of B to consume this message not all 3 of them.
Can you point me to some documentation which explains how this can be done? Ideally, some information about the load balancing approach adopted would be appreciated.
Should not be a problem as RabbitMQ uses variety of asynchronous architectural patterns to decouple applications and one of them is round robin
Round-Robin
By default RabbitMQ immediately dispatches (or pre-assigns) each message to the next consumer in sequence when it enters the queue. It dispatches messages evenly where where on average every consumer will get the same number of messages.
A shortcoming of this approach is when messages use uneven resources. In a situation with two workers, when all odd messages are heavy and even messages are light, one worker will be constantly busy and the other will do little work.
As shown in the example below , both the consumers will get the messages in a round robin manner , so in your case if the three instances bound to the same queue then one message will go to only one of the consumers , the KEY is that they should bind to a common queue.
Related
Similar to this question, we have FIFO queues and the messages must be processed in order. We want competing consumers from different machines for redundancy and performance reasons, but only one consumer on one machine should handle a message for a given queue at a time.
I tried setting the prefetch count to 1, but I believe this will only work if used with a single machine. Is this possible by default with RabbitMQ or do we need to implement our own lock?
Given a single queue with multiple consumers there is no way to block one of the consumers, all of them receive the messages in round-robin fashion.
EDIT
See https://www.rabbitmq.com/consumers.html#single-active-consumer
/EDIT
You could see this plugin, https://github.com/rabbitmq/rabbitmq-consistent-hash-exchange to distribute the load using different queues.
I tried setting the prefetch count to 1
prefetch=1 means that the consumers take one message at a time.
do we need to implement our own lock
Yes, If you want one single consumer for queue avoiding other consumers.
EDIT
There are also the Exclusive Queues https://www.rabbitmq.com/queues.html#exclusive-queues but note:
Exclusive queues are deleted when their declaring connection is closed or gone (e.g. due to underlying TCP connection loss). They, therefore, are only suitable for client-specific transient state.
I have a question about multi consumer concurrency.
I want to send works to rabbitmq that comes from web request to distributed queues.
I just want to be sure about order of works in multiple queues (FIFO).
Because this request comes from different users eech user requests/works must be ordered.
I have found this feature with different names on Azure ServiceBus and ActiveMQ message grouping.
Is there any way to do this in pretty RabbitMQ ?
I want to quaranty that customer's requests must be ordered each other.
Each customer may have multiple requests but those requests for that customer must be processed in order.
I desire to process quickly incoming requests with using multiple consumer on different nodes.
For example different customers 1 to 1000 send requests over 1 millions.
If I put this huge request in only one queue it takes a lot of time to consume. So I want to share this process load between n (5) node. For customer X 's requests must be in same sequence for processing
When working with event-based systems, and especially when using multiple producers and/or consumers, it is important to come to terms with the fact that there usually is no such thing as a guaranteed order of events. And to get a robust system, it is also wise to design the system so the message handlers are idempotent; they should tolerate to get the same message twice (or more).
There are way to many things that may (and actually should be allowed to) interfere with the order;
The producers may deliver the messages in a slightly different pace
One producer might miss an ack (due to a missed package) and will resend the message
One consumer may get and process a message, but the ack is lost on the way back, so the message is delivered twice (to another consumer).
Some other service that your handlers depend on might be down, so that you have to reject the message.
That being said, there is one pattern that servicebus-systems like NServicebus use to enforce the order messages are consumed. There are some requirements:
You will need a centralized storage (like a sql-server or document store) that allows for conditional updates; for instance you want to be able to store the sequence number of the last processed message (or how far you have come in the process), but only if the already stored sequence/progress is the right/expected one. Storing the user-id and the progress even for millions of customers should be a very easy operation for most databases.
You make sure the queue is configured with a dead-letter-queue/exchange for retries, and then set your original queue as a dead-letter-queue for that one again.
You set a TTL (for instance 30 seconds) on the retry/dead-letter-queue. This way the messages that appear on the dead-letter-queue will automatically be pushed back to your original queue after some timeout.
When processing your messages you check your storage/database if you are in the right state to handle the message (i.e. the needed previous steps are already done).
If you are ok to handle it you do and update the storage (conditionally!).
If not - you nack the message, so that it is thrown on the dead-letter queue. Basically you are saying "nah - I can't handle this message, there are probably some other message in the queue that should be handled first".
This way the happy-path is to process a great number of messages in the right order.
But if something happens and a you get a message out of band, you will throw it on the retry-queue (the dead-letter-queue) and Rabbit will make sure it will get back in the queue to be retried at a later stage. But only after a delay.
The beauty of this is that you are able to handle most of the situations that may interfere with processing the message (out of order messages, dependent services being down, your handler being shut down in the middle of handling the message) in exact the same way; by rejecting the message and letting your infrastructure (Rabbit) take care of it being retried after a while.
(Assuming the OP is asking about things like ActiveMQs "message grouping:)
This isn't currently built in to RabbitMQ AFAIK (it wasn't as of 2013 as per this answer) and I'm not aware of it now (though I haven't kept up lately).
However, RabbitMQ's model of exchanges and queues is very flexible - exchanges and queues can be easily created dynamically (this can be done in other messaging systems but, for example, if you read ActiveMQ documentation or Red Hat AMQ documentation you'll find all of the examples in the user guides are using pre-declared queues in configuration files loaded at system startup - except for RPC-like request/response communication).
Also it is very easy in RabbitMQ for a consumer (i.e., message consuming thread) to consume from multiple queues.
So you could build, on top of RabbitMQ, a system where you got your desired grouping semantics.
One way would be to create dynamic queues: The first time a customer order was seen or a new group of customer orders a queue would be created with a unique name for all messages for that group - that queue name would be communicated (via another queue) to a consumer who's sole purpose was to load-balance among other consumers that were responsible for handling customer order groups. I.e., the load-balancer would pull off of its queue a message saying "new group with queue name XYZ" and it would find in a pool of order group consumer a consumer which could take this load and pass it a message saying "start listening to XYZ".
Another way to do it is with pub/sub and topic routing - each customer order group would get a unique topic - and proceed as above.
RabbitMQ Consistent Hash Exchange Type
We are using RabbitMQ and we have found a plugin. It use Consistent Hashing algorithm to distribute messages in order to consistent keys.
For more information about Consistent Hashing ;
https://en.wikipedia.org/wiki/Consistent_hashing
https://www.youtube.com/watch?v=viaNG1zyx1g
You can find this plugin from rabbitmq web page
plugin : rabbitmq_consistent_hash_exchange
https://www.rabbitmq.com/plugins.html
If I have two queues from which I want to consume messages, and I use a single SimpleMessageQueueListenerContainer for it, in which order would the listeners be invoked/messages consumed when both queues have messages?
I will try to be more specific of the problem I am working on:
I have a consumer application which needs to consume messages from 2 queues – say regular-jobs-queue and infrequent-jobs-queue. If there are any messages in ‘infrequent-jobs-queue’ I want to consume those before consuming messages from ‘regular-jobs-queue’. I might not be able to combine these and put all messages into a single rabbitmq level priority queue and assign higher priority to infrequent-job message because of some upcoming use-cases like purging regular-jobs without affecting infrequent-jobs and others.
I am aware that RabbitMQ has support for consumer priority but I am not very sure if it will be applicable here. I want all instances of my consumer application to first consume messages of infrequent-jobs-queue if any and not prioritize amongst these consumers.
Or should I like have 2 containers, with dedicated consumer thread(s) per queue and have an internal priority-queue data structure into which I can put messages as and when consumed from rabbitmq queue.
Any help would be really appreciated. Thanks.
~Rashida
You can't do what you want; messages will be delivered with equal priority.
Moving them to an internal in-memory queue will risk message loss.
You might want to consider using one of the RabbitTemplate.receive() or receiveAndConvert() methods instead of a message-driven container.
That way you have complete control.
We're seeing an issue where consumers of our message queues are picking up messages from queues at the top of the alphabetical range. We have two applications: a producer, and a subscriber. We're using RabbitMQ 3.6.1.
Let's say that the message queues are setup like so:
Our first application, the producer, puts say 100 messages/second onto each queue:
Our second application, the subscriber, has five unique consumer methods that can deal with messages on each respective queue. Each method binds to it's respective queue. A subscriber has a prefetch of 1 meaning it can only hold one message at a time, regardless of queue. We may run numerous instances of the subscriber like so:
So the situation is thus: each queue is receiving 100 msg/sec, and we have four instances of subscriber consuming these messages, so each queue has four consumers. Let's say that the consumer methods can deal with 25 msg/sec each.
What happens is that instead of all the queues being consumed equally, the alphabetically higher queues instead get priority. It's seems as though when the subscriber becomes ready, RabbitMQ looks down the list of queues that this particular ready channel is bound to, and picks the first queue with pending messages.
In our situation, A_QUEUE will have every message consumed. B_QUEUE may have some consumed in certain race conditions, but C_QUEUE/D_QUEUE and especially E_QUEUE will rarely get touched.
If we turn off the publisher, the queues will eventually drain, top to bottom.
Is it possible to configure either RabbitMQ itself or possibly even the channel to use some sort of round robin distribution policy or maybe even random policy so that when a channel has numerous bound queues, all with messages pending, the distribution is even?
to clarify: you have a single subscriber application with multiple consumers in it, right?
I'm guessing you're using a single RabbitMQ Connection within the subscriber app.
Are you also re-using a single RabbitMQ Channel for all of your consumers? If so, that would be a problem. Be sure to use a new Channel for each consumer you start.
Maybe the picture is wrong, but if it's not then your setup is wrong. You don't need 4 queues if you are going to have subscribers that listen to each and every queue. You'd just need one queue, that has multiple instances of the same subscriber consuming from it.
Now to answer, yes (but no need to configure, as long as prefetch is 1), actually rabbitmq does distribute messages evenly. You can find about about that here, and on the same place actually how your setup should look like. Here is a quote from the link.
RabbitMQ just dispatches a message when the message enters the queue.
It doesn't look at the number of unacknowledged messages for a
consumer. It just blindly dispatches every n-th message to the n-th
consumer.
I have a middleware based on Apache Camel which does a transaction like this:
from("amq:job-input")
to("inOut:businessInvoker-one") // Into business processor
to("inOut:businessInvoker-two")
to("amq:job-out");
Currently it works perfectly. But I can't scale it up, let say from 100 TPS to 500 TPS. I already
Raised the concurrent consumers settings and used empty businessProcessor
Configured JAVA_XMX and PERMGEN
to speed up the transaction.
According to Active MQ web Console, there are so many messages waiting for being processed on scenario 500TPS. I guess, one of the solution is scale the ActiveMQ up. So I want to use multiple brokers in cluster.
According to http://fuse.fusesource.org/mq/docs/mq-fabric.html (Section "Topologies"), configuring ActiveMQ in clustering mode is suitable for non-persistent message. IMHO, it is true that it's not suitable, because all running brokers use the same store file. But, what about separating the store file? Now it's possible right?
Could anybody explain this? If it's not possible, what is the best way to load balance persistent message?
Thanks
You can share the load of persistent messages by creating 2 master/slave pairs. The master and slave share their state either though a database or a shared filesystem so you need to duplicate that setup.
Create 2 master slave pairs, and configure so called "network connectors" between the 2 pairs. This will double your performance without risk of loosing messages.
See http://activemq.apache.org/networks-of-brokers.html
This answer relates to an version of the question before the Camel details were added.
It is not immediately clear what exactly it is that you want to load balance and why. Messages across consumers? Producers across brokers? What sort of concern are you trying to address?
In general you should avoid using networks of brokers unless you are trying to address some sort of geographical use case, have too many connections for a signle broker to handle, or if a single broker (which could be a pair of brokers configured in HA) is not giving you the throughput that you require (in 90% of cases it will).
In a broker network, each node has its own store and passes messages around by way of a mechanism called store-and-forward. Have a read of Understanding broker networks for an explanation of how this works.
ActiveMQ already works as a kind of load balancer by distributing messages evenly in a round-robin fashion among the subscribers on a queue. So if you have 2 subscribers on a queue, and send it a stream of messages A,B,C,D; one subcriber will receive A & C, while the other receives B & D.
If you want to take this a step further and group related messages on a queue so that they are processed consistently by only one subscriber, you should consider Message Groups.
Adding consumers might help to a point (depends on the number of cores/cpus your server has). Adding threads beyond the point your "Camel server" is utilizing all available CPU for the business processing makes no sense and can be conter productive.
Adding more ActiveMQ machines is probably needed. You can use an ActiveMQ "network" to communicate between instances that has separated persistence files. It should be straight forward to add more brokers and put them into a network.
Make sure you performance test along the road to make sure what kind of load the broker can handle and what load the camel processor can handle (if at different machines).
When you do persistent messaging - you likely also want transactions. Make sure you are using them.
If all running brokers use the same store file or tx-supported database for persistence, then only the first broker to start will be active, while others are in standby mode until the first one loses its lock.
If you want to loadbalance your persistence, there were two way that we could try to do:
configure several brokers in network-bridge mode, then send messages
to any one and consumer messages from more than one of them. it can
loadbalance the brokers and loadbalance the persistences.
override the persistenceAdapter and use the database-sharding middleware
(such as tddl:https://github.com/alibaba/tb_tddl) to store the
messages by partitions.
Your first step is to increase the number of workers that are processing from ActiveMQ. The way to do this is to add the ?concurrentConsumers=10 attribute to the starting URI. The default behaviour is that only one thread consumes from that endpoint, leading to a pile up of messages in ActiveMQ. Adding more brokers won't help.
Secondly what you appear to be doing could benefit from a Staged Event-Driven Architecture (SEDA). In a SEDA, processing is broken down into a number of stages which can have different numbers of consumer on them to even out throughput. Your threads consuming from ActiveMQ only do one step of the process, hand off the Exchange to the next phase and go back to pulling messages from the input queue.
You route can therefore be rewritten as 2 smaller routes:
from("activemq:input?concurrentConsumers=10").id("FirstPhase")
.process(businessInvokerOne)
.to("seda:invokeSecondProcess");
from("seda:invokeSecondProcess?concurentConsumers=20").id("SecondPhase")
.process(businessInvokerTwo)
.to("activemq:output");
The two stages can have different numbers of concurrent consumers so that the rate of message consumption from the input queue matches the rate of output. This is useful if one of the invokers is much slower than another.
The seda: endpoint can be replaced with another intermediate activemq: endpoint if you want message persistence.
Finally to increase throughput, you can focus on making the processing itself faster, by profiling the invokers themselves and optimising that code.