This is not a question, but rather an answer for a question I couldn't find here before.
I had an application that kept crashing with the message 'Bus error'. This happened non-deterministically in different parts of my code, usually after a long running time. The only hint was the associated si_code, was 'BUS_ADRERR: Nonexistent physical address'.
The reason for the crash is that I would re-compile the code, thus messing up the memory mapping for the executable file.
I was running two Rscripts with different parameters simultaneously. The script at one point writes to and then subsequently reads from a file. I believe I got this error code from both scripts trying to write and read from the same file simultaneously.
Related
My Labview Program works like a charm, until I look at the Block Diagram. No changes are made. I do not Save. Just Ctrl+E and then Ctrl+R.
Now it does not work properly. Only a Restart of Labview fixes the problem.
My Program controls two Scanner arrays for Laser Cutting simultaneously. To force parallel working, I use the Error handler and loops that wait for a signal from the Scanner. But suddenly some loops run more often than they should.
What does majorly happen in Labview when I open the Block diagram that messes with my code?
Edit:
Its hard to tell what is happening without violating my non-disclosure agreement.
I'm controlling two independent mirror-Arrays for Laser Cutting. While one is running one Cutting-Job, the other is supposed to run the other Jobs. Just very fast. When the first is finished they meet at the same position and run the same geometry at the same slow speed. The jobs are provided as *.XML and stored as .net Objects. The device only runs the most recent job and overwrites it when getting a new one.
I can check if a job is still running. While this is true I run a while loop for the other jobs. Now this loop runs a few times too often and even ignores WAIT-blocks to a degree. Also it skips the part where it reads the XML job file, changes the speed part back to fast again and saves it. It only runs one time fast.
#Joe: No it does not. It only runs once well. afterwards it does not.
Youtube links
The way it is supposed to move
The wrong way
There is exactly one thing I can think of that changes solely by opening the block diagram.
When the block diagram opens, any commented-out or unreachable-code-compiler-eliminated sections of code will load their subVIs. If one of those commented out sections of code were somehow interfere with your running code, you might have an issue.
There are only two ways I know of for that to interfere... both of them are fairly improbable.
a) You have some sort of "check for all VIs in memory" or "check for all types in memory" that you're using as a plug-in system. When the commented-out sections load, that would change the VIs in memory. Such systems are not uncommon when parsing XML, so maybe.
b) You are using Run VI method for some dynamically invoked VI to execute as a top-level VI, but by loading the diagram, it discovers that it is a subVI of your current program. A VI cannot simultaneously be top-level and a subVI, so the call to Run VI returns an error.
That's it. I can't think of anything else. Both ideas seem unlikely, but given your claim and a lack of a block diagram, I figured I'd post it as a hypothesis.
In the improbable case someone has a similar problem. The problem was a xml file that was read during run time. Sometimes multiple instances tried to access it and this produced the error.
Quick point to check: are Debug and "retain data in wires" disabled? While it may not change the computations, but it may certainly change the timing of very tight loops, and that was one of the unexpected program behaviors, OP was referring to.
I have a two broken VIs with front panels that open fine, but I can't edit or run them, or open theis block diagrams.
One of these was made as a replacement for the first when it started to have this problem. I need to at least find out how to avoid this problem in future, so I don't lose work on bigger VIs.
I'm not sure if it makes any difference, but I very recently upgraded to LabVIEW 2013.
Thank you in advance.
This is the error I get when I try to run them:
"
VI has a bad connection to or cannot find a subVI or external routine.
This VI has a bad connection to or cannot find a subVI or external routine but
it has no block diagram to show or fix the error. You must find or correct the
subVI or external routine. Check for more information in the Explain dialog box
in Get Info.
"
Before reverting to a previous version (using dropbox) I got a different error with one of them:
"
LabVIEW: Generic error.
An error occurred loading VI 'sweep harmonics first test.vi', LabVIEW load
error code 6: Could not load the block diagram.
"
One situation how this happened.
Sometime LabVIEW crashes, and it restart. After restart, LabVIEW will ask you to recover the autosaved code.
I personally always discard those autosaved code. If you do choose to recover autosaved code, there is a chance the recovered code is corrupted. Once you save corrupted code to disk, you are probably going to lose the ability to open/save the block diagram ever again.
Having a version control system is usually a way to avoid minimize the damage when LabVIEW crashes. At worst, you loose maybe an hour worth of work.
If you can't open Block Diagram of your VI, first check the suggestion by #Rodrigo - it is most likely just a "compiled" VI, which has Block Diagram removed.
If you think there is Block Diagram inside and it is just corruped - you may contact NI support. And if you want to look deeper by yourself, extract the VI to XML using pyLabview, and look into the XML - there you can modify every single part of the VI. For example, you may start removing parts until it starts working.
I wouldn't go into manual VI editing unless you have at least a dozen of affected files though. For a single file, it will be faster to re-create it in LabVIEW instead of trying to understand the internals. If many files are affected - may be worth finding the issue in one, as other files probably have the same glitch, so you can make a script which extracts, modifies and re-creates VIs automatically.
From the sound of it, I believe what happens is that you are trying to run the VI's created as "DATA" for an executable, instead of the actual source VI's.
When you build an executable LabVIEW creates a copy of all the Top Level VI's dependencies into the support (DATA) folder which should be in the same directory as your executable.
Try opening the VI's that are marked as not having a block diagram and navigate to File>>VI Properties to check the path from which the VI is being loaded. If it's not the original VI, you can just replace it.
My firm's Access database has been having some serious problems recently. The errors we're getting seem like they indicate corruption -- here are the most common:
Error accessing file. Network connection may have been lost.
There was an error compiling this function.
No error, Access just crashes completely.
I've noticed that these errors only happen with a compiled database. If I decompile it, it works fine. If I take an uncompiled database and compile it, it works fine -- until the next time I try to open it. It appears that compiling the database into a .ACCDE file solves the problem, which is what I've been doing, but one person has reported that the issue returned for her, which has me very nervous.
I've tried exporting all of the objects in the database to text, starting with a brand new database, and importing them all again, but that doesn't solve the problem. Once I import all of the objects into the clean database, the problem comes back.
One last point that seems be related, but I don't understand how. The problem started right around the time that I added some class modules to the database. These class modules use the VBA Implements keyword, in an effort to clean up my code by introducing some polymorphism. I don't know why this would cause the problem, but the timing seems to indicate a relationship.
I've been searching for an explanation, but haven't found one yet. Does anyone have any suggestions?
EDIT: The database includes a few references in addition to the standard ones:
Microsoft ActiveX Data Objects 2.8
Microsoft Office 12.0
Microsoft Scripting Runtime
Microsoft VBScript Regular Expressions 5.5
Some of the things I do and use when debugging Access:
Test my app in a number of VM. You can use HyperV on Win8, VMWare or VirtualBox to set up various controlled test environments, like testing on WinXP, Win7, Win8, 32bit or 64 bits, just anything that matches the range of OS and bitness of your users.
I use vbWatchDog, a clever utility that only adds a few classes to your application (no external dependency) and allows you to trap errors at high level, and show you exactly where they happen. This is invaluable to catch and record strange errors, especially in the field.
If the issue appears isolated to one or a few users only, I would try to find out what is special about their config. If nothing seems out of place, I would completely unsintall all Office component and re-install it after scrubbing the registry for dangling keys and removing all traces of folders from the old install.
If your users do not need a complete version of Access, just use the free Access Runtime on their machine.
Make sure that you are using consistent versions of Access throughout: if you are using Access 2007, make sure your dev machine is also using that version and that all other users are also only using that version and that no components from Access 2010/2013 are present.
Try to ascertain if the crash is always happening around the same user-actions. I use a simple log file that I write to when a debugging flag is set. The log file is a simple text file that I open/write to/close everytime I log something (I don't keep it open to make sure the data is flushed to the file, otherwise when Access crashes, you may only have old data in the log file as the new one may still be in the buffer). Things I log are, for instance, sensitive function entry/exit, SQL queries that I execute from code, form open/close, etc.
As a generality, make sure your app compiles without issue (I mean when doing Debug > Compile from the IDE). Any issue at this stage must be solved.
Make absolutely sure you close all open recordsets, preferrably followed by setting their variables to Nothing. VBA is not as sensitive as it used to be about dangling references, but I found it good practice, especially when you cannot be absolutely sure that these references will be freed (especially when doing stuff at Module-level or Class-level for instance, where the scope may be longer-lived than expected).
Similarly, make sure you properly destroy any COM object you create in your classes (and subs/functions. The Class_Terminate destructor must explicitly clean up all. This is also valid when closing forms if you created COM objects (you mentioned using ADOX, scripting objects and regex). In general keeping track of created objects is paramount: make sure you explicitly free all your objects by resetting them (for instance using RemoveAll on a dictionary, then assigning their reference to Nothing.
Do not over-use On Error Resume or On Error Goto. I almost never use these except when absolutely necessary to recover from otherwise undetectable errors. Using these error trapping constructs can hide a lot of errors that would otherwise show you that something is wrong with your code. I prefer to program defensively than having to handle exceptions.
For testing, disable your error trapping to see if it isn't hiding the cause of your crashes.
Make sure that the front-end is local to the user machine, You mention they get their individual front-end from the network but I'm not sure if they run it from there or if it it copied on their local machine. At any rate, it should be local not on a remote folder.
You mention using SQL Server as a backend. Try to trace all the queries being executed. It's possible that the issue comes from communication with SQL Server, a corrupt driver, a security issue that prevents some queries from being run, a query returning unexpected data, etc. Watch the log files and event log on the server closely for strange errors, especially if they involve security.
Speaking of event log, look for the trace of the crash in the event log of your users. There may be information there, however cryptic.
If you use custom ribbon actions, make sure thy are not causing issues. I had strange problems over time with the ribbon. Log all all function calls made by the ribbon.
From what experience I have programming whenever a program has a problem it crashes, whether it is from an unhanded exception or a piece of code that should have been checked for errors, but was not and threw one. What would cause a program to completely freeze a system to the point of requiring a restart.
Edit: Thanks for the answers. As for the language and OS this question was inspired by me playing Fallout and the game freezing twice in an hour causing me to have to restart the xbox, so I am guessing c++.
A million different things. The most common that come to mind are:
Spawning too many threads or processes, which drowns the OS scheduler.
Gobbling too much RAM, which puts the memory manager into page-fault hell.
In a Dotnet/Java type environment its quite difficult to seize a system up, because the Runtime keeps you code at a distance from the OS.
Closer to the metal say C or C++, Assembly etc you have to play fair with the rest of the system - If you dont have it already grab a copy of Petzold and observe/experiment yourself with the amount of 'boilerplate' code to get a single Window running...
Even closer, down at the driver level all sorts of things can happen...
There are number of reasons, being internal or external that leads to deadlocked application, more general case is when something is being asked for by a program but is not given that leads to infinite waiting, the practical example to this is, a program writes some text to a file, but when it is about to open a file for writing, same file is opened by any other application, so the requesting app will wait (freeze in some cases if not coded properly) until it gets exclusive control of the file.
And a critical freeze that leads to restarting the system is when the file which is asked for is something which very important for the OS. However, you may not need to restart the system in order to get it back to normal, unless the program which was frozen is written in a language that produces native binary, i.e. C/C++ to be precise. So if application is written in a language which works with the concept of managed code, like any .NET language, it will not need a system restart to get things back to normal.
page faults, trying to access inaccessible data or memory(acces violation), incompatible data types etc.
Whether this is possible I don't know, but it would mighty useful!
I have a process that fails periodically (running in Windows 2000). I then have just one chance to react to it before having to restart it and painfully wait for it to fail again. I didn't write the process so don't have the source to debug. The failure is seemingly random.
With a snapshot of the process I could repeatedly and quickly test reactions to the failure.
I had thought of running inside a VM but this isn't possible in this instance.
EDIT:
#Jon Cage asked:
When you say a snapshot, you mean capturing a process when it's about to fail (including memory, program state etc. etc.) ...and then replaying it's final few seconds repeatedly to see what effect it has on some other component?
This is exactly what I mean!
I think minidump is what you are looking for.
You can also used Userdump:
The User Mode Process Dumper
(userdump) dumps any running Win32
processes memory image (including
system processes such as csrss.exe,
winlogon.exe, services.exe, etc) on
the fly, without attaching a debugger,
or terminating target processes.
Generated dump file can be analyzed or
debugged by using the standard
debugging tools.
This article shows you how to use it.
My best bet is to start the process in a debugger (OllyDbg being my preferred tool).
The process will pause on an exception, and you can try to figure out what happened shortly before that.
This needs some understanding of assembler and does not allow to create a snapshot of the process for later analysis. You would need to write your own debugger for that - it should be theoretically possible.