I have just installed a Redis Cache on a windows server using the rdis package (https://github.com/MicrosoftArchive/redis).
It runs under localhost fine.
My problem is what do I need to do to connect to this cache instance from a remote connection?
I am trying to connect to the ip address of the server I get the below error. I get the same error using the server name.
What needs to be done to expose the cache?
modify the redis conf, set the protected mode to no and bind the public ip of your machine.
I am using Windows server 2008 and installed wamp on it. Now I want to share the local link with client using same network.
Instead of [localhost], I am trying [server_ip_address]. but it's giving me error.
I want to use it as 192.168.30.1 but not able access this.
I also put the wamp online and restart the server. I m able use the ip from my m/c only. If I use this link from another m/c then its giving following error
URL http://192.168.5.12:8080
Error The connection has timed out
you can access the Server from your clients with url like,
http://server ip address : port
Your Local clients and your Local server must be connected in a LAN network.
Check your Windows firewall settings. Check by turning off the private network firewall
I have created a web application in glassfish and I can access it on my LAN.
How can I access the web application from a remote location over internet?
I do not have static IP.
Please reply.
Thanks.
Steps :
Creating virtual DNS(Domain name server) Server on your machine.
Port Forwarding.
Reference https://cookbook.fortinet.com/port-forwarding-60/
Remote Desktop Connection enabling.
Creating Inbound Rules. Reference :
https://www.howtogeek.com/112564/how-to-create-advanced-firewall-rules-in-the-windows-firewall/
Creating account on www.noip.com and create custom host and download DUC (Dynamic Update Client) Software.
Some more steps may have it depends on your LAN Router and firewall configuration.Use http://ifconfig.me/ to get your public ip.
Access from outside your machine should be configured by default. You may check if it is so in admin console, at Configurations->server-config->Network config->Listenters. There should be one listening on the desired port (like 8080) and be bound to 0.0.0.0 address.
To easily access something behind a dynamic ip you need something like http://www.noip.com/ or http://www.dnsomatic.com/ (I took these from my router's control panel)
I did this recently,
first you need to use port forwarding on your router, access it by typing your default gateway path, mine was 192.168.0.1 then go to "advanced settings -> Port forwarding". Simply enter the details that are asked for, I set mine to HTTP using port 8080, yours might be different. Protocol is TCP. The IP address it asks for is your local address.
For quick testing you can disable the firewall on your machine and then you can search on google for your Public IP address by typing "what is my IP".
Then type your ip into the browser and the port number "ipAddress:portNumber"
You should see the glassfish welcome screen if it is successful.
After that you might want to enable your firewall again but then you have to add an inbound rules to allow the port to be used:
Setting Windows inbound rules
Then you still have one last step to perform, allowing glassfish to access the resources on your machine: Adding glassfish to allowed programs
Follow the instructions on adding java.exe only.
I am trying to follow this tutorial. To train the Mahout engine they mention to use the command:
http://localhost:8080/kornakapi/train?recommender=itembased
This works. However I want to open up the server so that I can run this remotely. The code is running on a server at a specified IP address, let's call it 999.999.9.999. When I try
http://999.999.9.999/kornakapi/train?recommender=itembased
I get a 404 error. Obviously the server isn't setup to accept incoming connections (though phpMyAdmin works remotely). How can I setup the server to allow an external connection in this manner?
You need to configure your gateway to accept incoming requests. Access your modem and search for a setting that allows one computer on your LAN to open up all its ports. You have to enter in the computer's local IP
I want to make my site available world wide. Im using xampp server for hosting. I have no access to any kind of servers and modems. Situation is shown below:
My site server has local ip assigned by wifi router and it runs Windows 8.
Remember I have no access on any kind of servers and modems so port port-forwarding is impossible (out of my scope).
Its actually difficult, but not impossible.
One way, I would approach this is:
I would host a page on internet.
Then take request and store it in database.
One of my program will always be running from my computer.
Then check for request and curl the request to localhost. For this you may use Node.js (taking data from database using GET method and curl it to localhost).
This is the best I could think of. And I am working on it, when the code is ready I'll make it open source and notify you :)
But still, it's difficult, as you need to put user's request to sleep for 2 seconds and then transferring it.
Its slow, but may work out for you.
Disadvantages:
Program will be very slow and memory usage will be more.
Breaking may happen many times.
High bandwidth wastage
If not encrypted, MIM (Men in Middle) may possible.
Advantages:
Indirect method of hosting
Need not to worry about your code being lost.
I am looking forward for a better alternative and I would like to keep this question for bounty once again.
If you cannot open the necessary ports within your LAN you will require access to an external server. However, the external server does not need to host any code, e.g.
Create a Linux based ec2 instance using Amazon's free tier.
Install a package to redirect remote to local ports:
a. using socat:
Install socat using your distributions package manager
Connect via SSH: ssh -N -R 42500:127.0.0.1:80 -o ServerAliveInterval=60 ubuntu#xxx.xxx.xxx.xxx -N -R 8080:localhost:80 "socat TCP-LISTEN:8080,fork TCP:127.0.0.1:42500"
b. using a webserver and reverse proxy:
Install apache or nginx and any required reverse proxy modules and configure your VirtualHost to proxy requests to a local port, e.g. :8080 -> 127.0.0.1:42500
Connect via SSH: ssh -N -R 42500:127.0.0.1:80 -o ServerAliveInterval=60 ubuntu#xxx.xxx.xxx.xxx
Your machine is now reachable via the ec2 instance http://xxx.xxx.xxx.xxx:8080/.
I occasionally use this technique when debugging web service callbacks.
Update 17-02-2014
If you are a Windows user you will need to install a third-party tool to support ssh. Options include:
cygwin
git bash
PuTTY
PuTTY is the easiest choice if you are not familiar with *nix tools. To configure remote port forwarding in PuTTY expand the following setting: Connection -> SSH -> Tunnels. Given the previously described scenario, populate Source port as 42500, Desination as 127.0.0.1:80 and tick the Remote option. (You may also need to add the path to a PuTTY compatible private key in the Connection -> SSH -> Auth tab depending on your server configuration.
To test you have successfully forwarded a port, execute the command netstat -lnt on your server. You will see output similar to:
tcp 0 0 127.0.0.1:42500 0.0.0.0:* LISTEN
Finally you can test with curl http://127.0.0.1:42500. You will see the output of your own machines web root running on port 80.
if you don't have a public IP address and cannot use port forwarding it is impossible to host the site
As people have said you need a public IP address. However, even if you did you should not use xampp as a public server, as it is designed for development and therefore has some security settings disabled.
I would recommend buying some shared web hosting, and uploading it to that. (you can get cheap hosting if you google 'shared web hosting', plus free .tk domains are avaliable: http://www.dot.tk/)
Do your company has any vpn network?
If it does and you have access to the vpn network, you can include your server to the vpn network and your guest will only need to login to your company vpn network then access your site like in a local network without using port forwarding. And since your data is very confidential, I assume that using vpn will also help to increase the security of your data.
Please correct me if I'm wrong.
Thank You.
What you are asking is not possible without port forwarding.
Lets break it into steps.
To host your site locally you will need a IP that is static so that
users can access it specifically.
You will need a domain so that it can be converted into user friendly name.
A 24x7 Internet Connection is must! You added a Wifi Router in your Diagram and most of today's router are capable of port forwarding.
What i will do in your scenario is:
Instead of using XAMP, i will install WAMP because i am more familiar with it and easy to configure.(totally personal preference)
Then i would set my server "ONLINE".(Google how to set WAMP server online)
Forward port "80" from router settings to my local computer ip address.(mostly it is tagged as "Virtual Server","Firewall","Port Forwarding",etc vary router to router in settings)
Suppose you have a local ip "192.168.1.3" and global/router IP "254.232.123.232" then you would redirect all the HTTP request done towards router to your local IP.
[[[[254.232.123.232]]]] --+ :80 +-- --------->192.168.1.3
That is good for now, but then you will need to tackle dynamic IP problem of router. But don't worry, thanks to some free sites that will be easy!
Go to no-ip.org -> Setup Account -> and create a entry, just a subdomain for now to test whether everything is working fine.(subdomain like mysite.no-ip.org, later purchase a real Domain)
Input your IP address there(Router IP) and download its application which will automatically update their server if your local IP changes.
Wait for some minutes and Voila! Your site is live.