I need to compare and identify all IDs that have a mismatch in the codes between the categories, upper and lower case are only examples and I cannot base the join on the category field as they are different.
e.g: ID 1 - cat A, a have the same code but ID 3, cat E and e have a mismatch, same with ID#4.
Edit: sorry - after posting the question, and looking at the answers I have realized that my question was not conveying what I am looking for, and I have mocked up data incorrectly. The Category doesn't always have the same name as uppercase/lowercase letters, this was only meant to be an example.
T1
ID Cat Code
1 A 100
1 a 100
1 B 101
1 b 101
2 C 102
2 D 103
2 d 103
3 E 104
3 e 107
3 F 105
3 g 106
4 I 109
4 i 110
5 ABC 111
5 XYZ 112
5 KLM 123
6 PQR 113
6 STU 113
Desired output:
ID Cat Code
3 E 104
3 e 107
4 I 109
4 i 110
5 ABC 111
5 XYZ 112
5 KLM 123
This answers the original version of the question.
Use exists:
select t1.*
from t1
where exists (select 1
from t1 tt1
where tt1.id = t1.id and
upper(tt1.cat) = upper(t1.cat) and
tt1.cat <> t1.cat and
tt1.code <> t1.code
);
Oracle is case-sensitive by default.
You can use a self join like below to handle this issue:
select t1.*
from tablename t1
inner join tablename t2 on t2.ID = t1.ID and upper(t1.Cat) = upper(t2.Cat)
where t1.Code <> t2.Code
Related
I would like to get the representation of one record based on the primary key value from multiple tables. As shown below, each table can have multiple values based on this primary key value.
TABLE-1
ID
NAME
1
AA
2
BB
3
CC
4
DD
5
EE
TABLE-2
ID
SCHOOL
AUT
1
11
A
2
11
A
2
12
B
3
11
A
4
12
A
4
13
B
5
13
A
TABLE-3
ID
TC
1
101
2
102
2
103
2
104
3
105
4
106
4
107
5
108
The result below is the value obtained with an OUTER JOIN.
SELECT
T1.ID, T2.SCHOOL, T3.TC, T2.AUT
FROM
T1
LEFT OUTER JOIN
T2 ON T1.ID = T2.ID
LEFT OUTER JOIN
T3 ON T1.ID = T3.ID
ORDER BY
T1.ID ASC
ID
SCHOOL
TC
AUT
1
11
101
A
2
11
102
A
2
12
102
B
2
11
103
A
2
12
103
B
2
11
104
A
2
12
104
B
3
11
105
A
4
12
106
A
4
13
106
B
4
12
107
A
4
13
107
B
5
13
106
A
How can I get the result like below?
ID
SCHOOL
TC1
TC2
TC3
1
11
101
2
11
102
103
104
3
11
105
4
12
106
107
5
13
108
The important thing here is that in the result value, SCHOOL only shows that AUT is 'A'.
I would appreciate it if you let me know your query.
It looks, from your desired results, you just need to use row_number in combination with a conditional aggregate. Your sample data seems a little inadequate, I can't see any requirement for table1 at all.
Try the following:
with t as (
select t2.id,t2.school,t3.tc, Row_Number() over(partition by t2.id order by t3.tc) col
from t2 join t3 on t2.id=t3.id
where aut='A'
)
select id,school,
max(case when col=1 then tc end) TC1,
max(case when col=2 then tc end) TC2,
max(case when col=3 then tc end) TC3
from t
group by id, school
Example SQL Fiddle
SELECT
T1.ID, T2.SCHOOL,
GROUP_CONCAT(T3.TC),
GROUP_CONCAT(T2.AUT)
FROM
T1
LEFT OUTER JOIN
T2 ON T1.ID = T2.ID
LEFT OUTER JOIN
T3 ON T1.ID = T3.ID
GROUP BY
T1.ID, T2.SCHOOL
WHERE
T2.AUT = ‘A’
ORDER BY
T1.ID ASC
Notice that GROUP_CONCAT concatenates the values in the row.
EDIT: oh my, haven't seen that it's a SQL Server question!
Just replace GROUP_CONCAT with STRING_AGG if you’re using SQL Server 2017 or newer.
I want to join few tables:
table1:
A B_key B_version C D
123 abc 1 ccc 11
123 abc 2 ddd 11
456 dfg 1 rrr 22
789 vvv 1 55
table2:
A E F
123 s 5
456 r
111 t 2
table3:
B_key B_version G
abc 1 aa
abc 1 bb
abc 2 aa
abc 2 cc
dfg 1 aa
so the result would look like this:
A B_key B_version C D E F G
123 abc 1 ccc 11 s 5 aa
123 abc 1 ccc 11 s 5 bb
123 abc 2 ddd 11 s 5 aa
123 abc 2 ddd 11 s 5 cc
456 dfg 1 rrr 22 r aa
789 vvv 1 55
Version can go as high as 8.
IF I don't have A, B_key or B_version - the line is useless. Otherwise I need to keep all the information I do have.
In reality I have many more columns.
I've tried:
SELECT table1.A, table 1.B_key, table 1.B_version, table 1.C, table 1.D,
table2.E, table2.F,
table3.G
FROM table1
LEFT JOIN table2
ON table1.A = table2.A
LEFT JOIN table3
ON table1.B_key = table3.B_key AND
table1.B_version = table3.B_version
and the same with FULL JOIN.
It ends up the same: for every B_key only the highest B_version is kept, while the others disappear.
How can I avoid loosing information?
You can use left joins among tables as below :
select t1.A, t1.B_key, t1.B_version, t1.C, t1.D, t2.E, t2.F, t3.G
from table1 t1
left join table2 t2 on t2.A = t1.A
left join table3 t3 on t3.B_key = t1.B_key and t3.B_version = t1.B_version
Demo
in order to bring also the rows for unmatched values for join conditions.
If I understand correctly, you want all the b_keys and b_versions from table1 and table3. Then you want to bring in the other data. That suggests left joins
select . . .
from ((select B_key, B_version
from table1
) union -- on purpose to remove duplicates
( select B_key, B_version
from table3
)
) bb left join
table1 t1
on t1.b_key = bb.b_key and
t1.b_version = bb.b_version left join
table2 t2
on t2.a = t1.a left join
table3 t3
on t1.b_key = bb.b_key and
t1.b_version = bb.b_version;
I have 2 tables:
Table1 - Criteria
Office_ID Bus_Stream Bus_Criteria Crit_Value
1 ABC 0 20
1 ABC 1 21
1 ABC 2 7
2 ABC 0 15
2 ABC 1 12
2 ABC 2 21
3 XYZ 1 17
3 XYZ 2 3
Table2 - Limit
Bus_Stream GroupID TypeID SubgroupID Bus_Limit
ABC 20 21 7 50
ABC 15 12 21 100
XYZ 99 17 3 120
I need to create a join that allows me to pull back:
Result
Bus_Stream Office_ID GroupID TypeID SubgroupID Bus_Limit
ABC 1 20 21 7 50
ABC 2 15 12 21 100
XYZ 3 (null) 17 3 120
Essentially, I need to join Table1.Crit_Value based on the following:
Table1.Bus_Criteria Table2
0 GroupID
1 TypeID
2 SubGroupID
with the added complication that if one or two of the 0/1/2 values from Bus_Criteria is missing, the joins will still occur on the remaining criteria.
I have tried a number of combinations of AND/OR on the join to no avail.
Any ideas folks?
This may be what you're after.. use a case statement on the join.
The problem here is your data in t2 isn't normalized, you could also unpivot the 3 data columns in t2 so the join is more natural.
SELECT T2.Bus_Stream, T1.Office_ID, T2.GroupID, T2.TypeID, T2.SubGroupId, T2.bus_Limit
FROM T1
INNER JOIN T2
on T1.Bus_Stream = T2.Bus_Stream
and T1.Crit_value = case when T1.Bus_Critiera = 0 then T2.GroupID
when T1.Bus_Critiera = 1 then T2.TypeID
when T1.Bus_Critiera = 2 then T2.SubGroupID
end
Did you try something like this?
SELECT
t1.*, t2.*
FROM Table1 t1
INNER JOIN Table2 t2 ON
t1.Bus_Stream = t2.Bus_Stream AND
CASE
WHEN t1.Bus_Criteria = 0
THEN t2.GroupID = t1.Crit_Value
WHEN t1.Bus_Criteria = 1
THEN t2.TypeID = t1.Crit_Value
ELSE
t2.SubGroupID = t1.Crit_Value
END
I am looking for a query to a result where I can see only userid1 data whose provider is not mapped in Table 2; Here is my table definition and data;
Table 1
userid providerid
1 101
1 104
1 106
1 107
2 102
2 103
2 104
Table 2
providerid
101
102
103
104
105
106
107
108
109
110
query required as per the o/p:-
userid providernotavailable
1 102
1 103
1 105
1 108
1 109
1 110
2 101
2 105
2 106
2 107
2 108
2 109
2 110
You can use the not in operator:
SELECT *
FROM table1
WHERE providerid NOT IN (SELECT providerid FROM table2)
Multiple versions: fist with NOT IN
SELECT table1.*
FROM table1
WHERE table1.providerId NOT IN ( SELECT table2.providerId FROM table2 )
Second with NOT EXISTS:
SELECT table1.*
FROM table1
WHERE NOT EXISTS ( SELECT 1
FROM table2
WHERE table1.providerId = table2.providerId )
This next one is a bit strange: we do a LEFT JOIN and we check that the second table hasn't matched:
SELECT table1.*
FROM table1
LEFT JOIN table2
ON table1.providerId = table2.providerId
WHERE table2.providerId IS NULL
Which of the three versions above performs better depends (mostly) on the cardinality of the two tables.
Sorry, I misunderstood the question. This should do the trick.
The first part of the query selects all the pairs userId - providerId. The second part removes all the ones present in table1.
SELECT U.userId, P.providerId
FROM (SELECT DISTINCT table1.userId FROM table1) U, table2 P
MINUS
SELECT table1.* FROM table1
EDIT
this is the table structure i have used to get the output
SQL> desc tab1
Name Null? Type
---------------------------- -------- ----------------
USERID NUMBER(38)
PROVIDERID NUMBER(38)
SQL> desc tab2
Name Null? Type
---------------------------- -------- ----------------
PROVIDERID NUMBER(38)
SQL> select distinct(a.userid),b.providerId from tab1 a, tab2 b
minus
select * from tab1 ;
USERID PROVIDERID
---------- ----------
1 102
1 103
1 105
1 108
1 109
1 110
2 101
2 105
2 106
2 107
2 108
2 109
2 110
13 rows selected.
SELECT a.userid, b.providerid FROM table1 a, table2 b
WHERE a.providerid IS NOT NULL
MINUS
SELECT userid, providerid FROM table1 a
WHERE a.providerid IS NOT NULL;
The query bring the desired output...
Thanks all for ur efforts.
I have two tables in SQL Server that looks as follows,
Table 1:
Store Type
100 A
101 B
102 B
103 B
104 C
105 C
106 A
107 A
108 D
109 D
110 C
111 B
112 D
and table 2:
Store Units
100 5
101 3
102 10
103 6
104 6
105 8
I want to combine the two tables in a query with a relationship link between the Store column of the two tables. The problem i have is that if i create a query between the two then the stores from 106 to 112 does not appear in the table. The query looks as follows,
SELECT dbo.Table1.Store,
dbo.Table1.Type,
dbo.Table2.Units
FROM Table1 INNER JOIN Table2
ON dbo.Table1.Store=dbo.Table2.Store
What should i do to include the stores that does not appear in Table2 (106-112) but in Table1 and make there Units = 0, such that the query table look as follows,
Store Type Units
100 A 5
101 B 3
102 B 10
103 B 6
104 C 6
105 C 8
106 A 0
107 A 0
108 D 0
109 D 0
110 C 0
111 B 0
112 D 0
You want a left outer join instead of an inner join:
SELECT t1.Store, t1.Type, COALESCE(t1.Units, 0) as Units
FROM Table1 t1 LEFT JOIN
Table2 t2
ON t1.Store = t2.Store;
I also introduced table aliases for your query to make it more readable. Note the use of coalesce() so you get 0 for Units instead of NULL.
SELECT dbo.Table1.Store, dbo.Table1.Type, coalesce(dbo.Table2.Units, 0) As Units
FROM Table1
LEFT JOIN Table2 ON dbo.Table1.Store=dbo.Table2.Store