I use Bouncy Castle lib in my C# project, that generates Elliptic Curve keypair. The curve that I use is brainpoolP256r1 and when I check returned key using cryptii.com it shows that it's 65 byte array for public key as it must be. But when I try to generate key using openSSL and then check it in Cryptii it is 92 byte.
I am using the following commands in openSSL:
openssl ecparam -name brainpoolP256r1 -genkey -noout -out key.pem
openssl ec -in key.pem -out public.pem -pubout
what i'm doing wrong?
Generated public key:
MFowFAYHKoZIzj0CAQYJKyQDAwIIAQEHA0IABGFETzBdIgNwFDZN86O4R1MfCzSEPV3G46IW7S08VXXpNEPcqMJ5/nzYZM6hS6A0LkHBoxeJmnNLsgoohlQmmHE=
Related
I'm trying to generate a pfx file from a crt and a private key, and I keep getting No certificate matches private key.
No idea what's going on here.
I did:
openssl pkcs12 -export -out myaudiservice.com.pfx -inkey myaudiservice.com.key -in myaudiservice.com.crt -in gd_bundle-g2-g1.crt
Which gets me:
No certificate matches private key
So, I tried deleting everything, key, crt, cert chain, and then I generated a new CSR:
openssl req -new -newkey rsa:2048 -nodes -keyout myaudiservice.com.key -out myaudiservice.com.csr
Which generated a new key and new csr. I then uploaded the CSR to GoDaddy and requested the cert be re-keyed.
When that was done, I downloaded the new crt, and used the freshly generated key (from the openssl command used to generate the CSR), and I still get the same error.
Then, just as a sanity check I did:
mjb#bohr:~/Downloads/myaudiservice.com$ openssl x509 -noout -modulus -in myaudiservice.com.crt | openssl md5
(stdin)= 36d37e4f8f8672c127178a4a9cf32b89
mjb#bohr:~/Downloads/myaudiservice.com$ openssl rsa -noout -modulus -in myaudiservice.com.key | openssl md5
(stdin)= 36d37e4f8f8672c127178a4a9cf32b89
And they match....but I still get the:
No certificate matches private key
What can I try next?
You cannot have multiple -in arguments. It will just take the last, i.e. gd_bundle-g2-g1.crt. And no certificate in this file matches the key. Instead you should combine all certificates (and maybe even the key) into a single file and use this as argument for a single -in option.
thats my first post.
I will set up an Apache with ECDSA.
I generates this keys
secp256k1 : SECG curve over a 256 bit prime field
secp384r1 : NIST/SECG curve over a 384 bit prime field
and generate a self-signed certificate.
openssl ecparam -name secp256k1 -genkey -param_enc explicit -out rootCA.key
openssl req -x509 -new -nodes -key server.key -sha256 -days 1024 -out rootCA.pem
At the ssl.conf I set
SSLCipherSuite ECDHE-ECDSA-AES128-SHA256:ECDHE-ECDSA-AES256-SHA384
Wireshark shows me that the client supports the cipher and i looked at firefox config
The same cipher but with RSA cert works without problems.
I showed enough Tutorials but i cant find the problem.
www.ssllabs.com/ssltest/ this test fails also with "Assessment failed: Failed to communicate with the secure server"
Have someone ideas what I can do?
You cannot use ECDSA ciphers if you don't present an ECDSA certificate.
openssl ecparam -name secp256k1 -genkey -param_enc explicit -out rootCA.key
Great this should have created an ECDSA private key. Now you need to make it into a certificate (possibly a self-signed certificate).
But in your following commands, you never use rootCA.key to make a certificate. Most probably you have generated an RSA certificate not ECDSA. Try to use -key rootCA.key in your openssl req command.
I don't know if this is the correct place to ask it, but I will try.
I am trying to run http.ListenAndServeTLS with ECDSA certificate generated from OpenSSL.
It fail with this error message: tls: failed to parse private key
Go understand elliptic.P256(), in the code it has this comment See FIPS 186-3, section D.2.3.
In this link: http://www.ietf.org/rfc/rfc5480.txt, it says it is also called secp256r1.
As you can see below, OpenSSL undestand this as prime256v1.
$ openssl ecparam -name secp256r1 -text -noout
using curve name prime256v1 instead of secp256r1
ASN1 OID: prime256v1
NIST CURVE: P-256
So what is wrong?
How can I generate ECDSA certificate from OpenSSL and use it on my Go code?
Using generate_cert.go to generate a P256 ECDSA certificate, my code works, but if I try to read the key file with OpenSSL it fail also.
$ openssl ecparam -text -noout -in key.pem
unable to load elliptic curve parameters
140377431725720:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:701:Expecting: EC PARAMETERS
I couldn't figured out what is the problem between OpenSSL and Go.
But my main problem is, how to generate ECDSA certificate to use with Go code!
Using CFSSL (https://cfssl.org/) I can generate ECDSA certificate and sign it with my internal CA certificate generated from OpenSSL. The certificate generated from CFSSL works fine with my Go code, so for me it solves my main problem!
I don't know if there is a format problem between OpenSSL and Go, but as CFSSL is written in Go, the certificate generated on it works fine in my code and in browser.
Here is an example of OpenSSL generated ECDSA keys working with Go.
https://play.golang.org/p/MS_FQ8cqqA8.
As clarified in this issue - https://github.com/golang/go/issues/23591, go does not recognize EC keys that are generated with the -param_enc explicit flag in Openssl.
# openssl ecparam -name prime256v1 -genkey -noout -out priv2.pem
# openssl req -new -x509 -key priv2.pem -out EC_server2.pem -days 365
Hope this solves your problem.
Run:
go run `go env GOROOT`/src/crypto/tls/generate_cert.go --host=localhost --ecdsa-curve=P256
This will generate cert.pem and key.pem in the current directory.
Let me explain my question first. I bought a certificate from a CA and used the following format to generate the csr and the private key:
openssl req -new -newkey rsa:2048 -nodes -keyout server.key -out server.csr
When I open the server.key file, I see that it begins with "-----BEGIN PRIVATE KEY-----"
I use the SSL cert on my server and everything looks fine.
Now I want to upload the same cert to AWS IAM so that I can use it for by beanstalk load balancer. I use the following command from this aws doc http://docs.aws.amazon.com/IAM/latest/UserGuide/InstallCert.html#SubmitCSRCertAuth
iam-servercertupload -b public_key_certificate_file -k privatekey.pem -s certificate_object_name
I change the cert file names as required but keep getting this error: "400 MalformedCertificate Invalid Private Key."
The interesting thing is, on the aws doc page, the sample private key that they show starts with "-------Begin RSA Private Key--------"
Is there a way to convert my private key to an RSA private key using openssl?
Newer versions of OpenSSL say BEGIN PRIVATE KEY because they contain the private key + an OID that identifies the key type (this is known as PKCS8 format). To get the old style key (known as either PKCS1 or traditional OpenSSL format) you can do this:
openssl rsa -in server.key -out server_new.key
Alternately, if you have a PKCS1 key and want PKCS8:
openssl pkcs8 -topk8 -nocrypt -in privkey.pem
This may be of some help (do not literally write out the backslashes '\' in the commands, they are meant to indicate that "everything has to be on one line"):
It seems that all the commands (in grey) take any type of key file (in green) as "in" argument. Which is nice.
Here are the commands again for easier copy-pasting:
openssl rsa -in $FF -out $TF
openssl rsa -aes256 -in $FF -out $TF
openssl pkcs8 -topk8 -nocrypt -in $FF -out $TF
openssl pkcs8 -topk8 -v2 aes-256-cbc -v2prf hmacWithSHA256 -in $FF -out $TF
and
openssl rsa -check -in $FF
openssl rsa -text -in $FF
To Convert BEGIN OPENSSH PRIVATE KEY to BEGIN RSA PRIVATE KEY:
ssh-keygen -p -m PEM -f ~/.ssh/id_rsa
Can anyone tell me the correct way/command to extract/convert the certificate .crt and private key .key files from a .pem file? I just read they are interchangable, but not how.
I was able to convert pem to crt using this:
openssl x509 -outform der -in your-cert.pem -out your-cert.crt
Converting Using OpenSSL
These commands allow you to convert certificates and keys to different formats to make them compatible with specific types of servers or software.
Convert a DER file (.crt .cer .der) to PEM
openssl x509 -inform der -in certificate.cer -out certificate.pem
Convert a PEM file to DER
openssl x509 -outform der -in certificate.pem -out certificate.der
Convert a PKCS#12 file (.pfx .p12) containing a private key and certificates to PEM
openssl pkcs12 -in keyStore.pfx -out keyStore.pem -nodes
You can add -nocerts to only output the private key or add -nokeys to only output the certificates.
Convert a PEM certificate file and a private key to PKCS#12 (.pfx .p12)
openssl pkcs12 -export -out certificate.pfx -inkey privateKey.key -in certificate.crt -certfile CACert.crt
Convert PEM to CRT (.CRT file)
openssl x509 -outform der -in certificate.pem -out certificate.crt
OpenSSL Convert PEM
Convert PEM to DER
openssl x509 -outform der -in certificate.pem -out certificate.der
Convert PEM to P7B
openssl crl2pkcs7 -nocrl -certfile certificate.cer -out certificate.p7b -certfile CACert.cer
Convert PEM to PFX
openssl pkcs12 -export -out certificate.pfx -inkey privateKey.key -in certificate.crt -certfile CACert.crt
OpenSSL Convert DER
Convert DER to PEM
openssl x509 -inform der -in certificate.cer -out certificate.pem
OpenSSL Convert P7B
Convert P7B to PEM
openssl pkcs7 -print_certs -in certificate.p7b -out certificate.cer
Convert P7B to PFX
openssl pkcs7 -print_certs -in certificate.p7b -out certificate.cer
openssl pkcs12 -export -in certificate.cer -inkey privateKey.key -out certificate.pfx -certfile CACert.cer
OpenSSL Convert PFX
Convert PFX to PEM
openssl pkcs12 -in certificate.pfx -out certificate.cer -nodes
Generate rsa keys by OpenSSL
Using OpenSSL on the command line you’d first need to generate a public and private key, you should password protect this file using the -passout argument, there are many different forms that this argument can take so consult the OpenSSL documentation about that.
openssl genrsa -out private.pem 1024
This creates a key file called private.pem that uses 1024 bits. This file actually have both the private and public keys, so you should extract the public one from this file:
openssl rsa -in private.pem -out public.pem -outform PEM -pubout
or
openssl rsa -in private.pem -pubout > public.pem
or
openssl rsa -in private.pem -pubout -out public.pem
You’ll now have public.pem containing just your public key, you can freely share this with 3rd parties.
You can test it all by just encrypting something yourself using your public key and then decrypting using your private key, first we need a bit of data to encrypt:
Example file :
echo 'too many secrets' > file.txt
You now have some data in file.txt, lets encrypt it using OpenSSL and
the public key:
openssl rsautl -encrypt -inkey public.pem -pubin -in file.txt -out file.ssl
This creates an encrypted version of file.txt calling it file.ssl, if
you look at this file it’s just binary junk, nothing very useful to
anyone. Now you can unencrypt it using the private key:
openssl rsautl -decrypt -inkey private.pem -in file.ssl -out decrypted.txt
You will now have an unencrypted file in decrypted.txt:
cat decrypted.txt
|output -> too many secrets
RSA TOOLS Options in OpenSSL
NAME
rsa - RSA key processing tool
SYNOPSIS
openssl rsa [-help] [-inform PEM|NET|DER] [-outform PEM|NET|DER] [-in filename] [-passin arg] [-out filename] [-passout arg] [-aes128] [-aes192] [-aes256] [-camellia128] [-camellia192] [-camellia256] [-des] [-des3] [-idea] [-text] [-noout] [-modulus] [-check] [-pubin] [-pubout] [-RSAPublicKey_in] [-RSAPublicKey_out] [-engine id]
DESCRIPTION
The rsa command processes RSA keys. They can be converted between various forms and their components printed out. Note this command uses the traditional SSLeay compatible format for private key encryption: newer applications should use the more secure PKCS#8 format using the pkcs8 utility.
COMMAND OPTIONS
-help
Print out a usage message.
-inform DER|NET|PEM
This specifies the input format. The DER option uses an ASN1 DER encoded form compatible with the PKCS#1 RSAPrivateKey or SubjectPublicKeyInfo format. The PEM form is the default format: it consists of the DER format base64 encoded with additional header and footer lines. On input PKCS#8 format private keys are also accepted. The NET form is a format is described in the NOTES section.
-outform DER|NET|PEM
This specifies the output format, the options have the same meaning as the -inform option.
-in filename
This specifies the input filename to read a key from or standard input if this option is not specified. If the key is encrypted a pass phrase will be prompted for.
-passin arg
the input file password source. For more information about the format of arg see the PASS PHRASE ARGUMENTS section in openssl.
-out filename
This specifies the output filename to write a key to or standard output if this option is not specified. If any encryption options are set then a pass phrase will be prompted for. The output filename should not be the same as the input filename.
-passout password
the output file password source. For more information about the format of arg see the PASS PHRASE ARGUMENTS section in openssl.
-aes128|-aes192|-aes256|-camellia128|-camellia192|-camellia256|-des|-des3|-idea
These options encrypt the private key with the specified cipher before outputting it. A pass phrase is prompted for. If none of these options is specified the key is written in plain text. This means that using the rsa utility to read in an encrypted key with no encryption option can be used to remove the pass phrase from a key, or by setting the encryption options it can be use to add or change the pass phrase. These options can only be used with PEM format output files.
-text
prints out the various public or private key components in plain text in addition to the encoded version.
-noout
this option prevents output of the encoded version of the key.
-modulus
this option prints out the value of the modulus of the key.
-check
this option checks the consistency of an RSA private key.
-pubin
by default a private key is read from the input file: with this option a public key is read instead.
-pubout
by default a private key is output: with this option a public key will be output instead. This option is automatically set if the input is a public key.
-RSAPublicKey_in, -RSAPublicKey_out
like -pubin and -pubout except RSAPublicKey format is used instead.
-engine id
specifying an engine (by its unique id string) will cause rsa to attempt to obtain a functional reference to the specified engine, thus initialising it if needed. The engine will then be set as the default for all available algorithms.
NOTES
The PEM private key format uses the header and footer lines:
-----BEGIN RSA PRIVATE KEY-----
-----END RSA PRIVATE KEY-----
The PEM public key format uses the header and footer lines:
-----BEGIN PUBLIC KEY-----
-----END PUBLIC KEY-----
The PEM RSAPublicKey format uses the header and footer lines:
-----BEGIN RSA PUBLIC KEY-----
-----END RSA PUBLIC KEY-----
The NET form is a format compatible with older Netscape servers and Microsoft IIS .key files, this uses unsalted RC4 for its encryption. It is not very secure and so should only be used when necessary.
Some newer version of IIS have additional data in the exported .key files. To use these with the utility, view the file with a binary editor and look for the string "private-key", then trace back to the byte sequence 0x30, 0x82 (this is an ASN1 SEQUENCE). Copy all the data from this point onwards to another file and use that as the input to the rsa utility with the -inform NET option.
EXAMPLES
To remove the pass phrase on an RSA private key:
openssl rsa -in key.pem -out keyout.pem
To encrypt a private key using triple DES:
openssl rsa -in key.pem -des3 -out keyout.pem
To convert a private key from PEM to DER format:
openssl rsa -in key.pem -outform DER -out keyout.der
To print out the components of a private key to standard output:
openssl rsa -in key.pem -text -noout
To just output the public part of a private key:
openssl rsa -in key.pem -pubout -out pubkey.pem
Output the public part of a private key in RSAPublicKey format:
openssl rsa -in key.pem -RSAPublicKey_out -out pubkey.pem
To extract the key and cert from a pem file:
Extract key
openssl pkey -in foo.pem -out foo.key
Another method of extracting the key...
openssl rsa -in foo.pem -out foo.key
Extract all the certs, including the CA Chain
openssl crl2pkcs7 -nocrl -certfile foo.pem | openssl pkcs7 -print_certs -out foo.cert
Extract the textually first cert as DER
openssl x509 -in foo.pem -outform DER -out first-cert.der
Pre-requisite
openssl should be installed.
On Windows, if Git Bash is installed, try that! Alternate binaries can be found here.
Step 1: Extract .key from .pem
openssl pkey -in cert.pem -out cert.key
Step 2: Extract .crt from .pem
openssl crl2pkcs7 -nocrl -certfile cert.pem | openssl pkcs7 -print_certs -out cert.crt
This is what I did on windows.
Download a zip file that contains the open ssl exe from Google
Unpack the zip file and go into the bin folder.
Go to the address bar in the bin folder and type cmd. This will open a command prompt at this folder.
move/Put the .pem file into this bin folder.
Run two commands. One creates the cert and the second the key file
openssl x509 -outform der -in yourPemFilename.pem -out certfileOutName.crt
openssl rsa -in yourPemFilename.pem -out keyfileOutName.key
If you asked this question because you're using mkcert then the trick is that the .pem file is the cert and the -key.pem file is the key.
(You don't need to convert, just run mkcert yourdomain.dev otherdomain.dev )
A .crt stores the certificate.. in pem format. So a .pem, while it can also have other things like a csr (Certificate signing request), a private key, a public key, or other certs, when it is storing just a cert, is the same thing as a .crt.
A pem is a base 64 encoded file with a header and a footer between each section.
To extract a particular section, a perl script such as the following is totally valid, but feel free to use some of the openssl commands.
perl -ne "\$n++ if /BEGIN/; print if \$n == 1 && /BEGIN/.../END/;" mydomain.pem
where ==1 can be changed to which ever section you need. Obviously if you know exactly the header and footer you require and there is only one of those in the file (usually the case if you keep just the cert and the key in there), you can simplify it:
perl -ne "print if /^-----BEGIN CERTIFICATE-----\$/.../END/;" mydomain.pem