While building my solution in VS, am getting conan lock error in c++
1> XRLibrary/0.1#Xerox/XRLibrary is locked by another concurrent conan process, wait...
1> If not the case, quit, and do 'conan remove --locks'
9> perfmon.cpp
Just had the same problem with installing Sentry.io's packages. I did it on Windows, steps might be similar for Linux as well.
Make sure you have the latest version of Conan. Typically you can run the following (if conan was installed using pip):
pip install --upgrade conan
You can do the following next:
Remove directory /c/Users/TestUser/.conan/data/<some-package> (Here the some-package might be XRLibrary)
Rerun your conan install command.
If you are a mac user, just remove ~/.conan/data. That works for me.
Related
Can I somehow automatically specify in conanfile.py install the required package even if it is already installed?
If I do conan install <package> with my hands, then it will install it, even if it was installed before. But in conanfile.py it just writes ": Already installed!" and goes on.
This may conan create <package> --<param>, but it would be better if it was written in the recipe itself.
Thanks in advance
Check if Conan is not installed correctly.install failed,The initial installation is through the PIP installation
1、pip install conan
2、conan
An error occurs at step 2（windows 7）
failed create aprocess
There is a good page in Conan docs about installation.
The recommended way is using pip
If you are running Windows, please read carefully the notes in installation page.
Anyway, your problem is listed in troubleshooting page, where there is an explanation how to solve it.
Regards
I tried to install mcsema on my debian linux but I am stopped by error
Cmake 3.1 or higher is required. You are running 3.0.2. On debian this is the only version could be installed by apt-get install. Building CMake from sources, I get several errors as well. Does anyone know how to install the latest version of Cmake on Debian 8?
Download latests cmake release and follow the README.rst instructions:
UNIX/Mac OSX/MinGW/MSYS/Cygwin ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
You need to have a compiler and a make installed. Run the
bootstrap script you find in the source directory of CMake. You
can use the --help option to see the supported options. You may
use the --prefix=<install_prefix> option to specify a custom
installation directory for CMake. You can run the bootstrap script
from within the CMake source directory or any other build directory of
your choice. Once this has finished successfully, run make and
make install. In summary::
$ ./bootstrap && make && make install
I've been trying to install tensorflow with GPU support using these steps:
http://www.nvidia.com/object/gpu-accelerated-applications-tensorflow-installation.html
and also using:
http://thelazylog.com/install-tensorflow-with-gpu-support-on-sandbox-redhat/
This is the error message that I'm getting when I try to run the bazel build command for building the tensorflow pip package (with the --config-cuda flag set):
The specified --crosstool_top '//third_party/gpus/crosstool:crosstool' is not a valid cc_toolchain_suite rule.
What's strange is that if i remove the --config=cuda flag, I don't get the error message while building and I'm able to install tensorflow successfully - but without GPU support.
I experienced the same issue, using the nvidia instructions. What I did was to drop the git reset line in the instructions, and it works.
Details (from the error message):
Close, reopen terminal
Run git clone (again), and cd tensorflow
Run ./configure
Bazel build, etc
This may be unrelated, but I experienced an issue with the .whl line, the error message was that the wheel cannot be found or something along those lines. This is the "And finally install the TensorFlow pip package" section. To resolve it in my case, I typed in the terminal all the way to "..._pkg/tensorflow", and then pressed tab for auto-completion. The file name that popped up was significantly longer than that in the guide, but it worked. Also, if anyone face a numpy not installed message based on the nvidia instructions, replace the python-pip and dev with python-numpy and run that line again to install.
Configuration: Fresh Ubuntu 16.04, GTX970M, running driver 367.48 (from CUDA installation), CUDA 8.0, CuDNN 5.1
Full setup path:
Fresh Ubuntu, with downloads and 3rd party apps selected during installation.
Control panel => Software and updates => Other Software => Canonical ticked
Install CUDA using nvidia instructions in CUDA documentation, .deb format
CuDNN 5.1 installed, the rest from the nvidia link.
I hope everything works out for you!
(I'm sorry for the poor formatting)
I was going through same problem and recently found the solution. The problem is with the installation of Bazel which leads to this kind of error.
After installation of bazel from installer, make sure that you would give the correct path to ~./bashrc and also activate the path using
source "path-to-your-bin-directory-for-bazel"
Please change the git source version slightly as shown below
$ git clone https://github.com/tensorflow/tensorflow
$ cd tensorflow
// $ git reset --hard 70de76e
$ git reset --hard 287db3a
And please refer the below l
https://github.com/tensorflow/tensorflow/issues/4944
Also, zlib has been updated since this TF build. You need to check http://www.zlib.net/ to get the latest version and SHA-256, then update tensorflow/workspace.bzl with that information (lines 254-266 in this build). At this time, the correct version info would include the following:
url = "http://zlib.net/zlib-1.2.11.tar.gz",
sha256 = "c3e5e9fdd5004dcb542feda5ee4f0ff0744628baf8ed2dd5d66f8ca1197cb1a1",
strip_prefix = "zlib-1.2.11",
I am a novice with zeroMQ and I am stuck at binding ØMQ with java on a server running CentOS release 5.9.
Unfortunately, I do not have super user/root privileges on the server and am trying to install ØMQ as a normal user with restricted privileges. I have installed ØMQ by following instructions on http://www.zeromq.org/area:download
Make sure that libtool, autoconf, automake are installed.
Check whether uuid-dev package, uuid/e2fsprogs RPM or equivalent on your system is installed.
Unpack the .tar.gz source archive.
Run ./configure, followed by make.
Could not run the following obviously
To install ØMQ system-wide run sudo make install.
On Linux, run sudo ldconfig after installing ØMQ.
Then I attempted to install jzmq.
Cloned [git clone https://github.com/zeromq/jzmq.git]
Ran autogen.sh
Ran configure
At this point I get the following error
checking for ZeroMQ... no
checking zmq.h usability... no
checking zmq.h presence... no
checking for zmq.h... no
configure: error: cannot find zmq.h
As a result of the above error I am not able to run java tests and get error "no jzmq in java.library.path".
Can anybody help/direct me to how to get java binding for zeromq work when you dont have root privileges to install it? Its difficult to get IT department to install a new software on servers.
Appreciate your help.
Note: I do not have write permissions to /usr directory
Thanks
GBP
This can be overcome by adding --with-zeromq=/home/user/zeromq (installation directory of zeromq)
./configure --with-zeromq=/home/user/zeromq
Other steps include
export LD_LIBRARY_PATH=/home/user/zeromq/lib
You can also use JeroMQ (https://github.com/zeromq/jeromq) which is a pure Java implementation of ZeroMQ
I got this working by running autogen.sh on OEL 6 then running configure / compiling / installing on CentOS 5.9. I briefly looked into why autogen.sh was failing and the problem was the tool chain was too old. Since I had a more up-to-date system with a modern tool chain available running autogen.sh on something other than CentOS 5 was the easiest path for me. I'm sure it works fine with other modern Linux variants, I had OEL 6 at my finger tips.
I also did not have access to a standard directory for installation. To get that working I added zmq.jar to my class path, and the run-time linker needed to be able to find the zeromq and jzmq run-time libraries.
I faced the same issue on CentOS 6.5 and found that you need to install "gcc-c++" for this to work.
I used the following to install dependencies:
yum -y install jdk zeromq-devel unzip libtool gcc autoconf automake gcc-c++ python
Note that "jdk" comes from our private repository and it's same what can be downloaded from java.com
The following public repositories are installed on server:
atomic
Actually, I ended up having this same issue, and the following script worked for me, where I installed zeromq into ~ (so that I have ~/lib contains libzmq.a libzmq.la libzmq.so libzmq.so.3 libzmq.so.3.1.0 pkgconfig)
./autogen.sh ./configure --prefix=$HOME \ #because you don't have root privileges
--with-zeromq=$HOME --includedir=$HOME/include/ --libdir=$HOME/lib/
./make
./make -n install
#to check to see if it installs it to the right location
make install