I lost my system drive a day ago and with it all my duplicati settings/jobs (not the backups - they are ok)
Restoring works fine but I'd like to restore/recreate my jobs from an existing backup and continue backing up to that location
Is there a way to do that (couldn't find it in the web interface nor online documentation)
I created the job with the same settings (default settings and same AES password) and tried to start a backup, duplicati complained about a missing database and suggeted a db repair.
After the db repair run everything was back to normal.
Related
i'm trying to restore RavenDB from it's back up file, i write this query
Raven.Server.exe -src 'D:\documents\RavenDB\RavenDB' -dest TestRavenDB -restore
but it's not restoring database from the back up file, some one have any idea to restoring RavenDB from backup file.
Not sure which version of RavenDB you are using, but here is the command to restore a RavenDB database in RavenDB 3.5.
Raven.Server.exe --restore-source=[backup location] --restore-database=[URL to destination server]
from https://ravendb.net/docs/article-page/3.5/Csharp/server/administration/backup-and-restore
Note is that the --restore-database=[URL to destination server] allows you to run the command from a different machine than the server (like a developer workstation with RavenDB server installed). However, the --restore-source=[backup location] is relative to the server. So, when you say d:\documents\RavenDB\RavenDB would be the D: drive of the server.
Also, you said that you deleted the database and the files. When I deleted the database, but not the files (the default in version 3.5), I received a non-obvious error and stacktrace.
Hope that helps. Sorry I could not be more specific as to your problem.
I'm using the latest stable version (3.0.3660) on a VM on Windows Azure and would like to enable period backup. Have tried to enable both local backup and backup to Azure but the GUI doesn't seem to persist the changes. Modal dialog says "Saving..." but nothing more.
Is there a log for this so that I can troubleshoot what doesn't work?
/Erik
I tried it too and the database is non-responsive for several minutes (a co-worker was waiting for tens of minutes). But after waiting a while it actually does something. I configured the Azure backup and that went wrong because it couldn't upload a blob of that large a size. The error was logged and can be found in the studio > status > logs.
Running the server standalone (instead of running as a service) doesn't give any additional feedback either.
Managed it to work by setting "Raven/AnonymousAccess" to Admin and then save the changes, not sure why. Connected with API key that should have full access.
i am using this T-SQL to repair my TFS suspected database
EXEC sp_resetstatus [TFS_Projects];
ALTER DATABASE [TFS_Projects] SET EMERGENCY
DBCC checkdb([TFS_Projects])
ALTER DATABASE [TFS_Projects] SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DBCC CheckDB ([TFS_Projects], REPAIR_ALLOW_DATA_LOSS)
ALTER DATABASE [TFS_Projects] SET MULTI_USER
but when i use this T-SQL i will get error
Database 'TFS_Projects' cannot be opened due to inaccessible files or insufficient memory or disk space.
how can i repair my SQL database?
i am using SQL Server 2012
UPDATE 1:
this error will Occurred in line :
DBCC checkdb([TFS_Projects])
UPDATE 2:
i have 20GB free on hard drive that my mdf and ldf on it
UPDATE 3:
i can not chek Autogrow becuase when i right click on db the error will appear
mdf and ldf is not readonly
and i am loged in by windows administartor, and loged in sql server by sa
1) If possible add more hard drive space either by removing of unnecessary files from hard drive or add new hard drive with larger size.
2) Check if the database is set to Autogrow on.
3) Check if the account which is trying to access the database has enough permission to perform operation.
4) Make sure that .mdf and .ldf file are not marked as read only on operating system file system level.
Found here: http://blog.sqlauthority.com/2007/08/02/sql-server-fix-error-945-database-cannot-be-opened-due-to-inaccessible-files-or-insufficient-memory-or-disk-space-see-the-sql-server-error-log-for-details/
i update my answer becuase old answer is dangerous and will damage TFS database!
this answer is from microsoft : http://msdn.microsoft.com/en-us/library/jj620932.aspx
To back up your databases
Launch TFSBackup.exe.
The TFSBackup.exe tool is in the Tools folder where you installed Team Foundation Server. The default location is C:\Program Files\Microsoft Team Foundation Server 12.0\Tools.
In Source SQL Server Instance, enter the name of the SQL Server instance that hosts the TFS databases you want to back up and choose Connect.
In Select databases to backup, choose the databases to back up.
Need help? List of TFS 2010 databases on MSDN; List of TFS 2012 databases on MSDN.
In Backup Databases to, enter the name of a network share that is configured with read/write access for Everyone, or accept the default location in the file system of the SQL Server you connected to in step 2.
Note Note
If you want to overwrite backups stored in this network location, you can choose Overwrite existing database backups at this location.
Choose Backup Now.
The Backup tool reports progress on each database being backed up.
Choose Close.
Restore your data
To restore your TFS data
Launch TFSRestore.exe.
The TFSRestore.exe tool is in the Tools folder where you installed Team Foundation Server. The default location is C:\Program Files\Microsoft Team Foundation Server 12.0\Tools.
In Target SQL Server Instance, enter the SQL Server instance you will use as the data tier and choose Connect.
Choose Add Share and enter the UNC path to the network share that is configured with read/write access to Everyone where you stored the backups of your TFS data. For example, \servername\sharename.
If the backup files are located on the file system of the server that is running TFSRestore.exe, you can use the drop down box to select a local drive.
Note Note
The service account for the instance of SQL Server you identified at the start of this procedure must have read access to this share.
In the left hand navigation pane, choose the network share or local disk you identified in the previous step.
The TFS Restore Tool displays the database backups stored on the file share.
Select the check boxes for the databases you want to restore to the SQL Server you identified at the start of this procedure.
Important note Important
For SharePoint, you must only restore the WSS_Content database. Do not restore the WSS_AdminContent or WSS_Config databases. You want the new SharePoint Foundation versions of these databases, not the ones from the previous version of SharePoint or from a SharePoint installation running on any other server.
Choose Overwrite the existing database(s) and then choose Restore.
The Database Restore Tool restores your data and displays progress reports.
Choose Close.
Probably your database is corrupt either due to an unexpected server restart or filesystem corruption. You can use CheckDB to check for issues & remove the suspect status. However, the best bet is to restore it from a working backup.
Some reasons for when this happens are
Database is corupted
database files are being "opened" or held by some process (operating system, other program(s)...)
Not enough disk space for SQL Server
Insufficient memory (RAM) for SQL Server
Unexpected SQL Server shutdown caused by power failure
How to repair a suspect database
On a Windows Azure VM running Windows 2008 R2 and SQL 2012 Enterprise SP1 CU5, I'm trying to restore a backup stored in Azure as a page blob with the new functionality RESTORE DATABASE FROM URL.
So far I've done it several times with backups up to 60GB in size (uncompressed) and it works like a charm.
However, there is a particular backup 32GB in size that I can't restore. It fails with the following error message:
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
No further information is provided as to why it fails. If I download the same backup from to the local hard drive I can restore it without problem. I tried executing
dbcc traceon(3004,3605,-1)
to get more info and I can see that the DB is restored successfully, then it zeroes in the log file and after that completes is when it fails.
There isn't any error message in the SQL logs, neither in Windows Event log.
There is plenty of free space on that hard drive.
VM and storage are in the same datacenter and I've followed all best practices in building the environment.
EDIT> I noticed the following lines in Event viewer AFTER the database is restored and BEFORE it starts restoring the LOG file (in other words, while the log file is being zeroed)
SQLVDI: Loc=CVDS::Close. Desc=Open devices!. ErrorCode=(0). Process=2900. Thread=1104. Client. Instance=MSSQLSERVER. VD=Global\https://url/stuff/xx.bak_SQLVDIMemoryName_0.
SQLVDI: Loc=SignalAbort. Desc=Client initiates abort. ErrorCode=(0). Process=2900. Thread=1104. Client. Instance=MSSQLSERVER. VD=Global\https://url/stuff/xx.bak_SQLVDIMemoryName_0.
SQLVDI: Loc=TriggerAbort. Desc=invoked. ErrorCode=(0). Process=1508. Thread=2008. Server. Instance=MSSQLSERVER. VD=Global\https://url/stuff/xx.bak_SQLVDIMemoryName_0.
Is it possible that the connection to Azure storage times out before the zeroing finishes and thus the RESTORE fails? If so, how do I change this timeout?
You may wish to try enabling instant file initialization (it solved the problem for me). To do this you need to grant the SQL service account the 'Perform volume maintenance tasks' permission in security policy.
For instructions, see:http://blogs.msdn.com/b/sql_pfe_blog/archive/2009/12/23/how-and-why-to-enable-instant-file-initialization.aspx
With thanks to this 'question' for providing the answer:https://stackoverflow.com/questions/20692592/restoring-large-database-backups-from-azure-blob-storage-to-sql-server-2012-in-a
For anyone having this issue i found a different workaround.
Rather than creating the backup Log file to store on Azure blob storage, i changed that part of the script generated before execution to store it to local disk.
I'm unsure as to why the log file is not successfully being created when SQL attempts to write it to the blob storage.
Here is a segment of the script in questiona fter my amendmants :-
USE [master]
BACKUP LOG [RealTime] TO DISK = N'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQL14\MSSQL\Backup\YourDb_LogBackup_2015-07-07_09-04-17.bak'
WITH NOFORMAT, NOINIT, NAME = N'YourDb_LogBackup_2015-07-07_09-04-17', NOSKIP, NOREWIND, NOUNLOAD, NORECOVERY , STATS = 5
Leave the rest of the script generated to RESTORE the database as is.
I have a database showing up in SQL Enterprise Manager as "(Restoring...)"
If i do SP_WHO there is no restore process.
The disk and CPU activity on the server is very low
I think it is not restoring at all.
How can I get rid of this?
I've tried renaming the underlying MDF file, but even when I do "NET STOP MSSQLSERVER" it tells me the file is open.
I've tried using PROCEXP to find what process has the file open, but even the latest PROCEXP can't seem to do that on Windows Server 2003 R2 x64. The lower pane view is blank.
In the SQL Server log it says "the database is marked RESTORING and is in a state that does not allow recovery to be run"
Sql Server has two backup types:
Full backup, contains the entire database
Transaction log backup, contains only the changes since the last full backup
When restoring, Sql Server asks you if you want to restore additional logs after the full backup. If you choose this option, called WITH NORECOVERY, the database will be left in Restoring state. It will be waiting for more transaction logs to be restored.
You can force it out of Restoring mode with:
RESTORE DATABASE <DATABASE_NAME> WITH RECOVERY
If this command gives an error, detach the database, remove the MDF files, and start the restore from scratch. If it keeps failing, your backup file might be corrupted.
Here's a screenshot of the restore options, with the default selected. The second option will leave the database in Restoring state.
Image of the restore options http://img193.imageshack.us/img193/8366/captureu.png
P.S.1. Are you running the 64 bit version of process explorer? Verify that you see procexp64.exe in the task manager.
P.S.2. This is more like a question for serverfault.
WITH RECOVERY option is used by default when RESTORE DATABASE/RESTORE LOG commands is executed. If you're stuck in "restoring" process you can bring back a database to online state by executing:
RESTORE DATABASE YourDB WITH RECOVERY
GO
You can look for more options and some third party tools on this SO post https://stackoverflow.com/a/21192066/2808398
If you are trying to get rid of the lock on the file I would recommend getting Unlocker http://www.emptyloop.com/unlocker/
It'll give you an option to unlock the file, or kill the process that has locked the file. Run this on the mdf and ldf files.
Another option is to try to Detach the files from Enterprise Manager or Sql Management Studio and then reattach the db. You can try this before running unlocker to see if sql server will just release the mdf and ldf files.
CAUTION: If you kill the process you might lose data or the data might get corrupted so use this only if you are trying to get rid of it and you have a good and tested backup.