I have a maven multi module groovy project. When I run a main method in a groovy class thats in one of the submodules, intellij is not re-compiling before running it. It always runs the version last compiled when I manually initiated maven:compile. I don't recall having to do this manually or set any special intellij project settings in the past for this to work.
I've tried reimporting my project, several incarnations of updates to my poms, and then ultimately I had to create a run configuration where I specify a "Before Launch" configuration that executes mvn compile first. This just seems like a hack though. Its unclear to me if my issue is in a poorly constructed set of poms or if I'm truly missing some intellij configuration.
This works the first time
class MyClass2 {
static void main(String... args) {
print("foo")
}
}
but if I add another print statement such as printing bar, the output of the program only prints foo and not foo and bar.
class MyClass2 {
static void main(String... args) {
print("foo")
print("bar")
}
}
My module structure is like this:
my-project
module-1
src/main/groovy/com/foo/MyClass2.groovy (Depends on Module1)
module-2
src/main/groovy/com/foo/MyClass1.groovy
My pom file for this submodule has this build section:
<build>
<plugins>
<plugin>
<groupId>org.codehaus.gmavenplus</groupId>
<artifactId>gmavenplus-plugin</artifactId>
<version>1.7.1</version>
<executions>
<execution>
<goals>
<goal>addSources</goal>
<goal>compile</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
I can add more pom config if the problem is rooted there or provide screenshots of intellij config. I suspect intellij is the root of the problem because mvn compile and mvn clean install works just file at the parent as well as all submodules. I have no issues referencing MyClass1 from MyClass2; dependencies seem to be setup correctly.
Verify that you have Build step in Before launch section of Run Configuration added:
Related
I am deploying a war into JBoss 7.x using Arquillian for testing and it has a dependency on Apache Commons Collections. However, it just doesn't seem to pick up the module dependency.
MANIFEST.MF
Dependencies: org.apache.commons.collectionss export
Arquillian Deployment
#Deployment
public static Archive<?> createDeployment() {
WebArchive archive = ShrinkWrap.create(WebArchive.class);
archive
.addPackages(true, "com.example.package")
.addAsResource("META-INF/MANIFEST.MF", "META-INF/MANIFEST.MF")
// * Tried the following two options with no luck
//.AddAsManifestResource("META-INF/MANIFEST.MF", "MANIFEST.MF")
//.AddAsWebInfResource("META-INF/MANIFEST.MF", "META-INF/MANIFEST.MF")
// * If I enable the following, it works fine. getLibrary just picks
// * up the lib through maven.
//.addAsLibraries(
// getLibrary("commons-collections:commons-collections:3.2.1"))
;
return archive;
}
I don't want to use jboss-deployment-structure.xml since it feels like using a sledgehammer to crack a nut.
Any ideas?
In my case I added a MANIFEST.MF within src/test/resources and .addAsManifestResource("MANIFEST.MF") for Arquillian
MANIFEST.MF
Manifest-Version: 1.0
Built-By: me
Build-Jdk: 1.6.0_45
Created-By: Maven Integration for Eclipse
Dependencies: org.infinispan export
Arquillian
#Deployment(testable = false)
public static WebArchive createDeployment() {
MavenDependencyResolver mvnResolver = DependencyResolvers.use(MavenDependencyResolver.class).loadMetadataFromPom("pom.xml").goOffline();
return ShrinkWrap
.create(WebArchive.class, "example.war")
.addPackages(true, Filters.exclude(".*Test.*"), "com/comapany/")
.addAsManifestResource("MANIFEST.MF")
.addAsWebInfResource(EmptyAsset.INSTANCE, "beans.xml");
}
}
As it turned out, I asked this same question again (this time about Jar Files) since I forgot all about this question.
The solution has also since been discovered: (Same as from the other question)
The whole thing turned out to be a lot simpler.
Even with .addAsManifestResource OR .setManifest, the MANIFEST.MF was autogenerated by Maven.
This was resolved with the following section in pom.xml instead of using a custom MANIFEST.MF and using .setManifest("META-INF/MANIFEST.MF"); The MANIFEST.MF is auto-generated and there is no customised copy in the resources folder (to avoid confusion more than anything since it was ignored anyway)
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-war-plugin</artifactId>
<configuration>
<archive>
<manifestEntries>
<Dependencies>
org.infinispan,
org.infinispan.infinispan-tree export,
</Dependencies>
</manifestEntries>
</archive>
</configuration>
</plugin>
</plugins>
</build>
I have to generate sources using wsimport and i assume that it should go to /target/generated-sources/wsimport rather than /src/main/java.
The problem is that wsimport needs target folder created before execution and it fails. Can I create that dir first using any maven plugin. I can do it using ant but i prefer to keep it in POM.
Try using the add source goal of the build helper plugin:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>build-helper-maven-plugin</artifactId>
<executions>
<execution>
<id>add-source</id>
<phase>generate-sources</phase>
<goals>
<goal>add-source</goal>
</goals>
<configuration>
<sources>
<source>${basedir}/target/generated/src/wsimport</source>
</sources>
</configuration>
</execution>
</executions>
</plugin>
I have to generate sources using wsimport and i assume that it should go to /target/generated-sources/wsimport rather than /src/main/java.
This is a correct assumption.
The problem is that wsimport needs target folder created before execution and it fails. Can I create that dir first using any maven plugin. I can do it using ant but i prefer to keep it in POM.
I never noticed this problem (and would consider it as a bug, a plugin has to take care of such things).
The weird part is that WsImportMojo seems to do what is has to by calling File#mkdirs():
public void execute()
throws MojoExecutionException
{
// Need to build a URLClassloader since Maven removed it form the chain
ClassLoader parent = this.getClass().getClassLoader();
String originalSystemClasspath = this.initClassLoader( parent );
try
{
sourceDestDir.mkdirs();
getDestDir().mkdirs();
File[] wsdls = getWSDLFiles();
if(wsdls.length == 0 && (wsdlUrls == null || wsdlUrls.size() ==0)){
getLog().info( "No WSDLs are found to process, Specify atleast one of the following parameters: wsdlFiles, wsdlDirectory or wsdlUrls.");
return;
}
...
}
...
}
Could you show how you invoke the plugin and its configuration?
I have a maven project where I am using the assembly plugin.
I typically create my artifacts by running:
mvn clean verify assembly:assembly
(I have integration tests which I want run separately to unit tests).
When this runs, the assembly plugin is running the unit tests itself.
This causes them to be run twice.
Is there a way I can tell the assembly plugin not to run the tests?
I am tempted to run this in two steps:
1. mvn clean verify
2. if previous command successful, run mvn assembly:assembly -DskipTests=true
However, this is a little clumsy and would rather the single command.
Thanks,
Steven
When this runs, the assembly plugin is running the unit tests itself. This causes them to be run twice.
The assembly:assembly goal Invokes the execution of the lifecycle phase package prior to executing itself and running it on the command line will thus invoke any phase prior to package. And this includes the test phase.
Is there a way I can tell the assembly plugin not to run the tests?
No. My suggestion would be to create the assembly as part of the build lifecycle instead of invoking the plugin on the command line i.e. to bind it on a particular phase. For example:
<project>
...
<build>
<plugins>
<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<version>2.2-beta-5</version>
<executions>
<execution>
<id>create-my-assembly</id>
<phase>package</phase><!-- change this if not appropriate -->
<goals>
<goal>single</goal>
</goals>
<configuration>
...
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
</project>
And if you don't want the assembly to be created if your integration tests fail, then bind it on a later phase (e.g. post-integration-test or verify).
And if you don't want the assembly to be systematically created, put the above configuration in a profile.
A POM dependency contains native libraries (DLLs inside a JAR file). How do I programmatically look up the path of the downloaded JAR file so I can pass it into "java.library.path"?
Answering my own question: http://web.archive.org/web/20120308042202/http://www.buildanddeploy.com/node/17
In short, you can use the maven-dependency-plugin:unpack goal to extract the libraries into a known path, and pass that into java.library.path:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-dependency-plugin</artifactId>
<executions>
<execution>
<id>unpack</id>
<phase>compile</phase>
<goals>
<goal>unpack</goal>
</goals>
<configuration>
<artifactItems>
<artifactItem>
<groupId>org.jdesktop</groupId>
<artifactId>jdic-native</artifactId>
<version>${jdic.version}</version>
<classifier>${build.type}</classifier>
<type>jar</type>
<overWrite>true</overWrite>
<outputDirectory>${project.build.directory}/lib</outputDirectory>
</artifactItem>
</artifactItems>
</configuration>
</execution>
</executions>
</plugin>
Since System.load() can't load libraries from within a jar, you will have to use a custom loader which extracts the library to a temporary file at runtime. Projects With JNI discusses this approach and provide code for the custom loader.
Library loader
We now have our JNI library on the
class path, so we need a way of
loading it. I created a separate
project which would extract JNI
libraries from the class path, then
load them. Find it at
http://opensource.mxtelecom.com/maven/repo/com/wapmx/native/mx-native-loader/1.2/.
This is added as a dependency to the
pom, obviously.
To use it, call
com.wapmx.nativeutils.jniloader.NativeLoader.loadLibrary(libname).
More information is in the javadoc for
NativeLoader.
I generally prefer to wrap such things
in a try/catch block, as follows:
public class Sqrt {
static {
try {
NativeLoader.loadLibrary("sqrt");
} catch (Throwable e) {
e.printStackTrace();
System.exit(1);
}
}
/* ... class body ... */
}
An alternative would be to unpack the dependency, for example using dependency:unpack.
You can use the maven dependency plugin to copy the artifacts to a predefined path:
http://maven.apache.org/plugins/maven-dependency-plugin/examples/copying-artifacts.html
If the DLL is inside the JAR, then you will need to copy it out to a directory before it can be loaded. (JARs that include native libraries usually do this themselves.) If your JAR isn't doing this, then you can use Class.getResourceAsStream() and write this to a directory that you've added to the java.library.path.
For an example of this, see loadNativeLibrary in JNA. It uses this technique to load it's own library (a JNI library) from a JAR.
Is there a way to trigger a maven install command from another maven install command?
In other words, I would like to be able to execute a maven install command on a maven project (in eclipse) and I want that this will automatically cause an install command on another maven project.
Is that possible?
The Maven way to "trigger" another build is to define a multi-module build. A parent pom project can specify modules, that will all be built using the standard lifecycle. So running mvn install on the parent would mean that each module is built in turn.
The parent is defined with pom packagin, and would have a modules declaration like this:
<modules>
<module>module-a</module>
<module>module-b</module>
</modules>
Alternatively it is possible to attach additional artifacts to a build so they are deployed alongside the primary artifacts (assuming they've already been packaged, you can use the build-helper-maven-plugin to attach an arbitrary file to your pom, so it will be deployed with the specified classifier. The following configuration will attach the specified file as my-artifact-1.0-extra.jar
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>build-helper-maven-plugin</artifactId>
<version>1.3</version>
<executions>
<execution>
<id>attach-artifacts</id>
<phase>package</phase>
<goals>
<goal>attach-artifact</goal>
</goals>
<configuration>
<artifacts>
<artifact>
<file>/path/to/extra/file.jar</file>
<type>jar</type><!--or specify your required extension-->
<classifier>extra</classifier>
</artifact>
</artifacts>
</configuration>
</execution>
</executions>
</plugin>
As pointed out, the maven way to launch a goal (lets say mvn install) on a set of modules is to organize them as a multi-module project and to launch the goal on the parent pom. Behind the scene, Maven will use a "Maven reactor" for this work. The reactor will calculate the build order by doing a topological sort of the nodes of the directed graph constructed by the dependency relation between modules. This graph is constructed by looking at <modules> and <dependencies> tags in poms.
But launching maven from a parent is not the only option and maven offers more possibilities to play with the reactor (e.g. making a project and its dependencies or those that depend on it):
With maven 2.0.x you have to use the reactor plugin : http://maven.apache.org/plugins/maven-reactor-plugin/ (see Reactor: My New Favourite Maven Plugin too)
With maven 2.1+ you can use native command line options : http://www.sonatype.com/people/2009/03/maven-210-released/ (see the new build mode options -amd, -rf, -am, -pl)
Check it out, it might help you to achieve your goal.