I have tried to integrate facebook analytics to my app which was generated by expo but got error
Undefined is not an object( evaluating AppEventsLogger.logEvent)
I have tried to use expo eject to use expokit and then add the following code
import {AppEventsLogger} from 'react-native-fbsdk';
AppEventsLogger.logEvent('battledAnOrc');
Is there anyone add facebook analytics to app which generated by expo before?
That's expected behaviour since react-native-fbsdk includes native code (Any library that includes a react-native link step in its installation instructions)
Currently, there are no built-in modules in Expo that have made that module available. It can be seen that we are working hard at the moment.
If you want to use a module, you need to make the app a stand-alone app.
You can run this expo eject and yarn add react-native-fbsdk and react-native link react-native-fbsdk
Related
I'm working on react native project and I am using expo. I want to add the react-native-share package to my project, however I keep getting this error before I even add any code.
TypeError: null is not an object (evaluating '_reactNative.NativeModules.RNShare.FACEBOOK')
Now I know that expo has it's own version of the share, however you can't specify where a person can share it too, which honestly makes the feature useless. It seems to be clear that the reason I can't use this package is because I am using expo and can't install pod into the project -- due to expo reject it --. So what should I do? Any suggestions on how to work around this?
You can't normally use dependencies with native code using Expo. At least when using the classic build system (you're using it when you run expo start in the terminal to run your project). react-native-share has native code (you can check that by going to the repo and seeing if the library has ios and android folders) and therefore can't be used with "standard" Expo.
If you want to use custom native code in your project, you either need to eject from Expo to the bare workflow or - a newer option - use Expo EAS and custom dev clients. Expo EAS allows you to stay in the managed workflow and still use native modules. You might need to write something called a config plugin for some of those native dependencies you want to use, but looking at the documentation, react-native-share should be working just fine without a config plugin.
So: Either eject to the Expo bare workflow, or use Expo EAS and custom dev clients to use native dependencies with the Expo managed workflow. Do note however that you need at least Expo SDK 41 to use EAS and custom development clients.
To learn more about migrating from the classic build system to EAS, see Expo's guide / documentation.
I am implementing API to connect app with server. I have to use deviceId there. As mentioned in here we can use third party library 'react-native-device-info'. But when I am using it I am getting errors as attached screenshots. As per error it's saying to do linking but as I am using react version 0.62, so autolinking is there. So What can be issue? It took too much time to search it but till now I didn't get a proper solution.
react-native-device-info library wont work in Expo , since it requires linking of native modules hence the error.It will only work in pure react native apps.
You can check this by expo itself : expo-device
hopeit helps.feel free for doubts
You can use react-native-device-info even in Expo projects. You need to replace Expo Go with a custom build that has react-native-device-info library baked in.
By default, Expo Go used on Android, iPhone Emulators implies managed workflow (aka only expo-* modules are being used). However, using any pure react-native-* libraries falls under bare workflow, so you cannot use Expo Go - the error you see is from Expo Go, not your app.
Build your custom Expo app with expo-dev-client, react-native-device-info libraries included, and install that on your emulators. This needs to be done once when you add a react-native-* library.
Now continue to add code to your project that uses features from react-native-device-info.
npx expo start --dev-client and choose your emulator. Your custom build will be launched and you can make live changes as always like in Expo Go.
Do check out the section on Development Builds from Expo. Needless to say, I have successfully used react-native-device-info on my Expo project, because expo-device cannot provide what I needed.
I created a RN with create-react-native-app, and I have now decided to eject. It didn't work initially, and required some packages to be installed (#babel/...), but now, it complains that Module 'expo' does not exist in the Haste module map.
Why does it still require expo, now that it has been ejected? Or have I misunderstood what ejection does?
N.B. during the ejection I chose the option to eject to an RN app, not to ExpoKit. This is on iOS, currently.
When ejecting expo app you'll be asked about using expo-kit or just react-native and it's up to you to choose, plus Module 'expo' does not exist in the Haste module map means you still using expo in your code so double check your code to be sure that you're not importing expo anywhere and try again.
TL;DR
Ejected expo react native app requires expo? the short answer is no.
when using expo app you have the ability to build your app using the expo server so you don't have to have Android Studio or XCode installed all you have to do is $ expo build:[android|ios] and download your built package after the build process is done also you can run your app using expo client app on Android and Ios but once ejecting you'll lose the ability of using expo server as your build environment instead you have to use Android Studio or XCode, but the main difference here is when you choose expo-kit you still have the ability of using expo client to run your app and you still have the ability to use expo modules inside your code but when you choose react-native you can't use expo client instead you have to use the native tools, anyway in all cases once you eject your project you have to build it yourself and you can't undo this step.
Sidenote
You can build very powerful apps using only JavaScript without any need to eject especially when using `expo SDK 31+, I'm working on an app now with features like detecting location, live maps, social login and chat and I don't need to eject it at all.
Please take a look here and here
Update:
One last thing you have to remember is that when using expo or expo-kit you can keep developing ios app on any OS but when using react-native you can't do this you MUST have a mac.
I have build an app using react native(detached) but the thing is I would want to completely get rid of Expo. The reason is, what if one day EXPO service get shut down or no more supported.
So in this case I would not want the app to be affected.
Currently I need to publish my app thru ExpoKit to see the latest changes, how would I build my android app so it would not have any reference to Expo but still be able to work properly
Currently this is how I understand how the react native and expo works: first u build ur app using react native code and then a bundle.js is generated somewhere on cloud(EXPO) using publish command so the app communicate with that bundle.js.
Note I am not using any feature from Expo so why would I need Expo in this case?
Edited: If I am detaching my app from expo, I mean why would I still need Expo? Can't I just build the app and run the app without expo at all?
You can build your whole application without using expo, just follow the steps from facebook documentation in "Building Projects with Native Code" tab.
or
you can run "npm run eject" in your project root directory folder.
After this, you can build your appliaction using react-native cli commands, like
react-native run-android.
edited :--
For building apk for production, you can follow steps given in facebook documentation as generating signed apk and for released IPA for iOS yo can follow building your app for production for IOS.
In plugin they mentioned that the razorpay is not going to work with expo. i want to acces razorpay plugin in my react native app. is there any way..? i am using expo. please help me
if the react native library you want requires a linking step, then you can detach and use ExpoKit directly.
https://docs.expo.io/versions/latest/guides/detach.html
EAS builds officially released in Expo SDK 42 makes it possible to run native modules on expo projects.
In order to make sure Razorpay wrapper works correctly:
Create a dev build of your expo app by following the instructions mentioned here.
run your project by running the following command
For ios
expo run:ios
For android
expo run:android