In my project I m using Pod - "QRCodeReader.swift", version 8.2.0.
Code Repo: https://github.com/yannickl/QRCodeReader.swift
The above mentioned version of the pod has an issue that sometimes it fails to scan the QR Code. The next time I run the app, it starts responding properly.
Thanks in advance.
Related
Goal: In a react-native project, I'm using react-native-firebase v5.6 and because im using Firebase's authentication, I need to include "Firebase/Auth" in the pod file so react-native-firebase's bindings can use it.
Problem: Once pod "Firebase/Auth" is added and saved to podfile, and pod install is successfully run, the project build fails when compiling RNFirebaseAuth.m. I haven't added any auth related code, just simply installed the pod and clean&ran build. Sidenote, other react-native-firebase setup/integration has been successful to this point.
Failing Error:
/path/to/project/node_modules/react-native-firebase/ios/RNFirebase/auth/RNFirebaseAuth.m:1184:36: error: no known class method for selector 'credentialWithProviderID:IDToken:rawNonce:'
credential = [FIROAuthProvider credentialWithProviderID:#"apple.com" IDToken:authToken rawNonce:authTokenSecret];
Have I just missed an installation step or what? How do I fix build?
According to mikehardy on GitHub, react-native-firebase v5.6 has a minor breaking change that enforces the use of firebase pods with at least version 6.13.
I ran pod update and that was all that was needed to fix the build
I have installed library using pod file.
used this library
https://github.com/ivpusic/react-native-image-crop-picker
image selection from gallery working fine when I run code from x-code , but got above error when I run 'react-native run-ios'.
Any solution will be helpful.
Reason for this error:
The xcode could find the library in pods you need to install pods in order to make it work on iOS.
try running
pod install
I've been developing an App using React Native and when I switched to a Mac environment to set up the configurations for ios, after all the setup has been done, the app opens very quickly and closes after the installation, showing that powered by react native screen. I noticed that in my packager screen, the line from the bundle which shows a progress of how much has been loaded does not appear, as if it has never been loaded. Same thing happens if I try to run the code from Xcode.
Here is the screen I'm talking about, for a test project I started for comparisson purposes:
And here is the same screen for my App, without the progress indicator being displayed:
I tried following some solutions provided by the comunity for similar issues but none of them worked. Note that no error message is displayed in my terminal window, as if the build and installation has been succesfull.
Can someone help me with this one? I've been strugling with this App for quite some time, as react native always seems to crash and display error messages for me. Any help would be much appreciated :)
Edit: forgot to mention that I'm trying to run the app on the simulator since I don't have an actual device.
Exactly this problem happened to me yesterday when I too installed react-native-firebase. I ran react-native run-ios and the app closed as soon as it opened without any specific errors.
I decided to run the app from Xcode, so I opened the Xcode project. To be more precise I opened the <Project>.xcworkspace because I installed CocoaPods. And there inside the logs I when trying to run the app I found the error. It said that the GoogleService-Info.plist was not found. And as I was looking through the Xcode workspace I did not see the file there, although it existed under /ios/<Project>/ in my IDE (VSCode). So maybe just a syncing problem.
So basically I added the file in Xcode as well, re-run and app was running fine.
Of course, I have no idea if I can find some sort of credible sources about this, but this exact issue happened to me under the exact same circumstances as yours.
Some solutions ...
If you are in latest react version then try to downgrade it.
Re-start your application and try to run again.
Delete node modules folder and run using npm install.
Try to open project using XCODE and build through it.
Most probably the problem is with your react version. Try to downgrade to stable react version and try
Check the log for errors, run react-native log-ios on the terminal and monitor it for errors.
or you can enable Debug JS Remotely option from the simulator by pressing command+D and check the console for errors.
Try to use adb logcat *:E, this will be helpful when you trying to find issues not related js.
I depends on the version of your react-native, if you are using its latest version , 0.56.0 (for now) it has a known issue, which you can see here, and it is suppose to be fixed in next version 0.57.0
https://github.com/facebook/react-native/issues/19953
although the issue raised for android version, but it has similar issue in ios
(the latest comment, provides more info about the error)
for now the possible fix is to downgrade to 0.55.4 or 0.55.0
if this couldn't solve your issue, Please provide more information about your app with adding package.json and build.gradle info to the question
Add firebase crashlytics or open again and again that app, so it navigates to the log screen to find the issue. Mainly it caused by the misconfigured pod settings. So please check your Podfile. because all the other errors are comes in app's internal error console. I'm attaching the Non error formed Podfile for your reference. It's only the example
Podfile
require_relative '../node_modules/react-native/scripts/react_native_pods'
require_relative '../node_modules/#react-native-community/cli-platform-ios/native_modules'
platform :ios, '12.0'
target 'iospodapp' do
config = use_native_modules!
use_react_native!(
:path => config[:reactNativePath],
# to enable hermes on iOS, change `false` to `true` and then install pods
:hermes_enabled => false
)
permissions_path = '../node_modules/react-native-permissions/ios'
pod 'Permission-LocationAlways', :path => "#{permissions_path}/LocationAlways.podspec"
pod 'Permission-LocationWhenInUse', :path => "#{permissions_path}/LocationWhenInUse.podspec"
pod 'Permission-MediaLibrary', :path => "#{permissions_path}/MediaLibrary.podspec"
pod 'Permission-Notifications', :path => "#{permissions_path}/Notifications.podspec"
pod 'Permission-PhotoLibrary', :path => "#{permissions_path}/PhotoLibrary.podspec"
pod 'YogaKit'
pod 'Firebase/Performance'
pod 'Firebase/Messaging'
pod 'RNVectorIcons', :path => '../node_modules/react-native-vector-icons'
pod 'react-native-orientation', :path => '../node_modules/react-native-orientation'
pod 'RNFS', :path => '../node_modules/react-native-fs'
target 'iospodappTests' do
inherit! :complete
# Pods for testing
end
# Enables Flipper.
#
# Note that if you have use_frameworks! enabled, Flipper will not work and
# you should disable the next line.
use_flipper!()
post_install do |installer|
flipper_post_install(installer)
installer.pods_project.targets.each do |target|
target.build_configurations.each do |config|
config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '12.0'
end
end
end
end
Note:
If you're using the firebase, don't forget to add the GoogleService-Info.plist into your ios directory through xcode.
If you're using firebase analytics that also makes the crash. because it needs too more configurations to avoid the crash. so check your build without firebase analytics first. If everything is fine, you can add the analytics later
If it occurs without any major changes
close Terminal, Emulator and any other application related.
clean the project
clean cache
npm start -- --reset-cache
clean and Install pod file
Cd IOS && podinstall
Rebuild the project.
I'm experiencing the same issue since yesterday, the app Im working on is old we are using "react": "16.8.3", "react-native": "^0.59.10", although the app used to work for me properly before, I cloned a fresh copy of the app from the github repo and it worked for the first time, then I again issued the same command npx react-native run-android and after installing the app should open while opening it starts to crash with no error, I see similar metro bundler screen as has been shared in the question. I tried to run the android folder via android studio I could see one issue which Im not able to resolve since yesterday
/node_modules/#react-native-community/netinfo/android/gradle.properties
(Operation not permitted)
which Im not able to figure out how to solve.
I did exactly the steps which are described here in the React-native getting started guide:
https://facebook.github.io/react-native/docs/getting-started.html
When I open the Project and build it, the build fails:
RCTAssert.h file not found' in MyProjectNameTests.m .
What am I missing?
Here are the steps from the getting started guide:
Requirements
OS X - This repo only contains the iOS (7+) implementation right now,
and Xcode only runs on Mac.
Xcode 6.3 or higher is recommended.
Homebrew is the recommended way to install io.js, watchman, and flow.
Install io.js 1.0 or newer. io.js is the modern version of Node.
Install nvm with its setup instructions here. Then run nvm install
iojs-v2 && nvm alias default iojs-v2, which installs the latest
compatible version of io.js and sets up your terminal so that typing
node runs io.js. With nvm you can install multiple versions of Node
and io.js and easily switch between them.
New to npm?
brew install watchman. We recommend installing watchman, otherwise
you might hit a node file watching bug.
brew install flow. If you want to use flow. We recommend
periodically running brew update && brew upgrade to keep your
programs up-to-date.
Quick Start
npm install -g react-native-cli
react-native init AwesomeProject
In the newly created folder AwesomeProject/
Open AwesomeProject. xcodeproj and hit run in Xcode. Open index.ios.js
in your text editor of choice and edit some lines. Hit cmd+R in your
iOS simulator to reload the app and see your change!
The test application can't find the header because it's not in the header search path.
In the left hand file list, hit the top left "folder" icon, then select your application at top left. In this case "AwesomeProject".
To the right of that, where the application icon appears, hold down to change to AwesomeProjectTests.
On the right side, click on the 'Build settings' tab.
Then scroll down to Header Search Paths and change "$(SRCROOT)/node_modules/react-native/React" to "$(SRCROOT)/../node_modules/react-native/React".
The app should now compile.
I got the same issue as daniel but I already have the right path in xcode ...
0.10.0 is my version
It's an issue in 0.10.0, and it has been fixed just now.
You need to re-generate your project. Refer to this PR: https://github.com/facebook/react-native/pull/2474
seeing same issue here and it seems react-native is latest on 0.10.0, i was using 0.8.0 and was running fine. May be to disable the test target for now?
Before testing any option from the above mentioned solutions, just clean your xCode and build the app again. That helped me
I had the same issue (I just had changed my apple ID password). I needed to redo the code signing configuration.
This happened to me on a React Native project.
I rolled back my code to a version that I knew built successfully and still got this error. How is this even possible? There's two hours of my life I'll never get back. I write this here on the chance I save you from the same fate.
In my case when I jump from my IDE in which I code my react-native project over to Xcode I open it from Spotlight.
At this point it is so easy to click the wrong icon on the right hand side. I accidentally clicked on the Xcodeproj file instead of the Xcworkspace. Easy to do, once it loads everything looks exactly the same, I was none the wiser.
The only indication that something had gone wrong was the build errors. Worse this error looks like a dependency management issue sending you down completely the wrong path in a resolution attempt.
This is not just a React Native specific issue, but something all Cocoapod users need to remember.
ADD the React Path to Podfile
platform :ios, '9.0'
target 'YourProject' do
...
pod 'React', :path => '../node_modules/react-native'
end
target 'RNFirebaseTests' do
...
pod 'React', :path => '../node_modules/react-native'
end
I'm working on project in which I need to install braintree,
actually braintree was integrate and work fine but yesterday, it failed to compile with my project.
I am integrating Braintree SDK via Cocoa-pods and always open workspace instead of opening project file.
In start, it shows me issue regarding missing of library "-lPods-myProject-braintree"
then I delete cocoa-pods (uninstall it) again install it and repeat the whole cycle of integrating braintree SDKs via Pods but now it showing me issue,
First Time I also get this type of errors but finally it solved by one line.
please run following commands in Terminal
go to your project folder.
Be sure you have installed cocoapods in your system.
create pod file with command - nano podfile
write pod 'Braintree' in your podfile.
save podfile and run command pod install
If you get failed to install pod.
then run command pod try Braintree
You will surely get your pod installed in your project with xcodeworkspace file.