I'm a DNN beginner. I am currently building a module in which I can display statistics. My DotNetNuke Version is 7.0. The statistic is from Chartjs. For this statistic I would like to implement filters. These filters should be datepickers. As UI element I have now included a textbox with TextMode='Date'. But currently I have problems to set the default value of this field. The default value should be 01.01. of the current year.
I have already tried to set the value via C# server side. Unfortunately without success. I also tried to set the value on the client side via JavaScript. Unfortunately also without success.
These are some lines I tried in JavaScript:
document.getElementById(<%= this.DatumVon.AccessKey %>).value = "01.01.2019";
document.getElementById(<%= this.DatumVon.AccessKey %>).innerText = "01.01.2019";
document.getElementById("DatumVon").value = "01.01.2019";
These are some lines I tried in C# in the method "Page_Load" (server side):
this.DatumVon.Text = "01.01.2019";
I expected the value of the TextBox to be 01.01.2019. However, it currently only contains dd.mmm.yyyy. How can I change this?
Thank you.
There is something wrong with your localization. Please refer to the jQuery UI datepicker documentation (the "Localization" section), this should give you the answer.
wow... I solved it. I made it. Sometimes the solution is right in front of you and you don't see it. Michael Tobisch was absolutely right. When setting the value, the format is very important. I have always used the German format. A DNN TextBox with TextMode="Date" can't handle that. DNN converts this TextBox into an HTML input field. But this input field can only be clear with the format "yyyy-mm-dd". Depending on the geographical position of the client (at least that's what I think) the text displayed in the input field will be formatted. But the value of the input field always has the same format ("yyyy-mm-dd"). So very important here: the displayed text and the actual value have different formats.
Many thanks again to Michael Tobisch for the mental inspiration and the patience with me.
What is also important is that the access to the actual ID of a DNN element works as follows: this.Element.ClientID and not as I assumed before this.Element.AccessKey. This was also buggy.
Related
I'm not very used to Active Reports and I got an old software using those. The software provide some kind of stripped version of Active Reports Designer 7.
I got a PageFooter section with some fields and I want to remove one to display it only when it's the last page.
Basically, what I want to do is this in scripts :
if (this.PageNumber == this.PageCount) {
Field.Visible = true;
}
I only find one post here that say this.PageNumber should work, but it dosent.
So I tried to use the ReportInfo using the FormatString as {PageNumber}, but I don't seems to be able to read the value using this.ReportInfo.Value or this.ReportInfo.Text
I also tried to make a TextBox, using SummaryType : PageCount. But I'm still unable to read the Value.
So the question is :
How can I know the Page Number and Page Count in the script section?
Or how can I read the value of those textbox I created ?
Thanks a lot!
I think these docs cover what you are looking for:
https://help.grapecity.com/activereports/webhelp/Legacy/AR7Help/OnlineEN/AddPageNumbering.html
https://help.grapecity.com/activereports/webhelp/Legacy/AR7Help/OnlineEN/index.html
I went through the Merge Tags here and here, but couldn't figure out the syntax that would allow me to show content based on whether the user has certain Tag or not.
Help?
My goal in case it helps:
User subscribes, and is queued for a welcome mail one day later. In meantime that user may get tagged (my way of segmenting them), and so, the next day when that user receives the welcome mail, the content needs to be catered based on the tag that user got.
Got a response from their support saying
merge tags do not work with Tags just yet
here's the whole thing:
While we do have conditional merge tags available, I'm afraid we do
not have any that would work with Tags. To be transparent, Tags were
recently added a few months ago, and there are some features in our
application that has not updated to work with Tags just yet.
Because conditional merge tags do not work with tags yet, the best
option would be to create multiple automations and send them out based
on each tags. If you do it that way, you'll be able to target those in
specific tags with specific content
Dug a little deeper from the first link. There is another link Use Conditional Merge Tag Blocks which contained the below code:
Name
IF-ELSE
Definition
Use ELSE to indicate alternative content to display if the *|MERGE|* tag value is false.
Example
*|IF:MERGE|* content to display *|ELSE:|* alternative content to display *|END:IF|*
Name
ELSEIF
Definition
Use ELSEIF to specify a new *|MERGE|* tag to be matched against if the first *|MERGE|* tag value is false.
Example
*|IF:TRANSACTIONS >= 20|* Enjoy this 40% off coupon! *|COUPON40|*
*|ELSEIF:TRANSACTIONS >= 10|* Enjoy this 20% off coupon! *|COUPON20|*
*|ELSE:|* Enjoy this 10% off coupon! *|COUPON10|* *|END:IF|*
More examples with definitions can be found here.
Hope this is the answer you were after.
I have been developing a web application using domino, therein I have dblookup-ing the field from notes client; Now, this is working fine but the format of value is missing while using on web.
For example in lotus notes client the field value format is as above
I am one, I am two, I am one , I am two, labbblallalalalalalalalalalalalalalalalalalaallllal
Labbbaalalalallalalalalalaalallaal
Hello there, labblalalallalalalllaalalalalalalalalalalalalalalalalalalalalalalala
Now when I retrieve the value of the field on web it seems it takes 2 immediate after 1. and so forth, I was expecting line feed here which is not happening.
The field above is multi valued field. Also on web I have used computed text which does db lookup from notes client.
Please help me what else could/alternate solution for this case.
Thanks
HD
Your multi-valued field has display options associated with it and the Notes client honors those. Obviously, your options are set up to display entries separated by newlines.
The computed text that you are using for the web does not have options like that and the field options are irrelevant because you aren't displaying the field. Your code has to insert the #Newlines. That's pretty easy because #DbLookup returns a list, and if you concatenate a list and a scalar, the scalar will be appended to each element of the list. (Look at the third example under "concatenation, pairwise" here to see what I mean.
The way you've worded your question is a little unclear to me, but what you need in your computed text formula is either something like this:
list := #DbLookup(etc,. etc.);
list + #Newline;
Or something like this:
multiValueFieldContainingListWithDbLookupResult + #NewLine;
I used #implode(Dblookupreturnedvalue;"");
thanks All :)
I'm very new to OpenRefine, so please bear with me if i have made a simple mistake.
I'm parsing a HTML website to gather some date.
Everything went fine with fetching the individual pages, but now the parsing of the HTML fails.
I'm creating a new column, based on the one holding all the page's HTML. I'm trying to get to the data in a specific DIV[20].
In the"create column based on this column" window it gives me a preview when using value.parseHtml().select("DIV")[20] , which results in exactly what i need... executing it gives me nothing but blank cells.
it even tells me that it is "filling 0 rows with grel:value.parseHtml().select("DIV")[20]"
Any clue what i'm doing wrong here?
You just need to finalize with .toString() to output the JSON.org object AS a string.
This is explained on our wiki here: https://github.com/OpenRefine/OpenRefine/wiki/StrippingHTML#extract-html-attributes-text-links-with-integrated-grel-commands
I also updated the select() function with that example: https://github.com/OpenRefine/OpenRefine/wiki/GREL-Other-Functions#selectelement-e-string-s
I'm doing something like the following: Validate number of nested attributes.
I'm checking for existence of at least one nested attribute.
This was working fine when I was using a text input for the date but I've changed it to use a date_select instead and now the same validation code shows an error saying that not enough have been chosen.
When it fails validation and reloads the form it also doesn't "build" an instance of the nested attribute either so it just shows my "[+]" link
Anybody got any ideas?
Failing everything I'll just have to put the text field back (probably using type=date).
Col
I decided to just put the text field back.