I need to filter down to only service orders that have a "service" work group value in at least one of their tasks. However, I don't want to get rid of the rows that aren't work group = "Service" if at least one of the task rows has that value. The end result would leave out all data from service orders that didn't have at least one BI_WRKFLW_TASK_KEY that was equal to "SERVICE". I know how to do normal filters but getting it to this specificity is beyond my current experience.
I've experimented with normal filters but they leave out rows that are a part of the same Service Order but just don't have that work group.
SELECT W.BI_WRKFLW_KEY,
T.BI_WORK_EVENT_CD,
T.BI_TASK_CD,
T.BI_WORKGRP,
**M.BI_SO_NBR**,
M.BI_SO_TYPE_CD,
M.BI_CLOSE_DT,
M.BI_OPEN_DT,
M.BI_SO_STAT_CD,
R.BI_WRKFLW_TMPLT_NM,
T.BI_WRKFLW_TASK_SEQ_NBR,
T.BI_WORKGRP,
A.BI_WORK_EVENT_CD,
A.BI_EVENT_DT_TM,
A.SY_JOB_QUEUE_ID,
**A.BI_WORKGRP**,
A.SY_USER_ID,
**A.BI_WRKFLW_TASK_KEY**
FROM BI_WRKFLW W
LEFT JOIN BI_WRKFLW_TASKS T ON W.BI_WRKFLW_KEY = T.BI_WRKFLW_KEY
LEFT JOIN BI_SO_DET D ON W.BI_WRKFLW_KEY = D.BI_WRKFLW_KEY
LEFT JOIN BI_SO_MASTER M ON D.BI_SO_NBR = M.BI_SO_NBR
LEFT JOIN BI_WRKFLW_TMPLT_REF R ON W.BI_WRKFLW_TMPLT_ID = R.BI_WRKFLW_TMPLT_ID
LEFT JOIN BI_TASK_ACT A ON T.BI_WRKFLW_TASKS_KEY = A.BI_WRKFLW_TASKS_KEY
WHERE M.BI_OPEN_DT >= ADD_MONTHS(CURRENT_DATE, -'12')
--AND M.BI_SO_TYPE_CD IN ('IVC-NEW1')
--AND M.BI_SO_STAT_CD LIKE 'O'
ORDER BY M.BI_SO_NBR, T.BI_EVENT_DT_TM
Any Service order row where the Service order has at least one BI_WRKFLOW_TASK_CD = "Service" would be kept and all other service orders filtered out.
I tried to map this out, i may not have got it quite right,
I think you are asking for BI_SO_MASTER records that have >=1 BI_WRKFLW_TASKS that belong to a certain group.
Try using a CTE to get the detail rows with a correct task, then you can find the SO population... then you can ???not sure what the ultimate result set goal is?
;with matchingTasks as ( D.BI_SO_NBR, D.<id> , W.BI_WRKFLW_KEY , T.<key> , A.Key
from BI_WRKFLW W
LEFT JOIN BI_WRKFLW_TASKS T ON W.BI_WRKFLW_KEY = T.BI_WRKFLW_KEY
LEFT JOIN BI_SO_DET D ON W.BI_WRKFLW_KEY = D.BI_WRKFLW_KEY
LEFT JOIN BI_TASK_ACT A ON T.BI_WRKFLW_TASKS_KEY = A.BI_WRKFLW_TASKS_KEYW
Where
<good dates>
and <A.field is what I am looking for>
)
/*Here you have the SO population
as well as the ids that helped this SO qualify.
*/
, My_SO_Population as (select Distinct BI_SO_NBR from matchingTasks )
/*now you can go get what you need.
the challenge of finding SOs w/ >=1 matching task has been solved...
*/
select <necessary fields> from
My_SO_Population
join <whatever you need....this is where i am cloudy>
if i am missing the goal, let me know where...
You can just add this to your WHERE clause:
AND T.BI_WRKFLW_KEY IN (
SELECT BI_WRKFLW_KEY
FROM BI_WRKFLW_TASKS
WHERE BI_WRKFLOW_TASK_CD = 'Service')
Related
long time lurker. I've searched and searched though none of the solutions work for me.
I'm working in a Sybase (ASE) db (most mssql/mysql transactional db solutions will work just fine)
In my example, I'm trying to calculate/count the number of times a specific 'party_id' is listed in a column. The problem I'm having is that it's only counting FOR each row- so of course the count is always going to be 1.
See output:
(I would like for party_id 130568 to show '2' in the refs column, 125555 to show '5', etc.)
output
Here is my query:
select
count(distinct p.party_id) as refs,
p.party_id,
sp_first_party(casenum),
c.casenum,
mld.mailing_list,
p.our_client
from cases c
inner join party p on c.casenum=p.case_id
inner join names n on n.names_id=p.party_id
inner join mailing_list_defined mld on n.names_id=mld.names_id
where
mld.mailing_list like 'Mattar Stars'
and mld.addr_type like 'Home'
and n.deceased='N'
and p.our_client='Y'
group by p.party_id, c.casenum, mld.mailing_list, p.our_client
order by sp_first_party(casenum) asc
Any tips would be greatly appreciated.
Thank you
Sounds like you need to be using an APPLY statement. Not sure if the join criteria on the APPLY statement is correct, but you should be able to extrapolate the logic. See if that will work with Sybase.
SELECT pic.PartyInstanceCount AS refs
,p.party_id
,sp_first_party(casenum)
,c.casenum
,mld.mailing_list
,p.our_client
FROM cases AS c
INNER JOIN party AS p ON c.casenum = p.case_id
INNER JOIN names AS n ON n.names_id = p.party_id
INNER JOIN mailing_list_defined AS mld ON n.names_id = mld.names_id
OUTER APPLY (
SELECT COUNT(1) AS PartyInstanceCount
FROM party p2
WHERE p2.case_id = c.casenum
) pic
WHERE mld.mailing_list LIKE 'Mattar Stars'
AND mld.addr_type LIKE 'Home'
AND n.deceased = 'N'
AND p.our_client = 'Y'
ORDER BY
sp_first_party(casenum) ASC
Let's say I have a table that represents soccer matches (X_train in this case) with an away_team_id and a home_team_id, those id points to another table 'team_attributes'.
What I managed to do with a query is to select the attributes of only one of the team but I'm interested in getting both team's attributes.
This is the query I'm using now :
SELECT
X_Train.* , Team_Attributes.*, MAX(Team_Attributes.date)
FROM
X_Train
LEFT JOIN
Team_Attributes ON X_Train.home_team_api_id = Team_Attributes.team_api_id
AND Team_Attributes.date <= X_Train.date
GROUP BY
X_Train.id
ORDER BY
X_Train.date
This works fine but I need to get the same join on the X_train.away_team_api_id, is there an easy way to do this ? I tried using UNION but maybe I didn't look far enough in that direction.
Thank you
You need a second join. For that -- and to simplify the query -- use table aliases:
SELECT t.*, hta.*, ata.*
FROM X_Train t LEFT JOIN
Team_Attributes hta
ON t.home_team_api_id = hta.team_api_id AND
hta.date <= t.date LEFT JOIN
Team_Attributes ata
ON t.away_team_api_id = ata.team_api_id AND
ata.date <= t.date
ORDER BY t.date DESC;
I don't understand what the GROUP BY is doing, so I removed it. Your question appears to be about JOIN logic anyway.
I have a table called ArchiveActivityDetails which shows the history of a Customer Repair Order. 1 Repair Order will have many visits (ActivityID) with a Technician allocated depending on who is available for that planned visit.
The system automatically allocates the time that is required for a job but sometimes a job requires longer so we manually ammend jobs.
My initial query from the customer was to pull the manually ammended jobs (ie: jobs where PlannedDuration >=60 minutes) and shows the Technician linked to that manually ammended job.
This report works fine.
My most recent request from the customer is to now ADD a column showing WHO WAS THE PREVIOUS TECHNICIAN linked that the Repair Order.
My collegues suggested I do a Cross Apply going back to the ArchiveActivityDetails table and then show "Previous Tech" but I have not used Cross Apply before and I am struggling with the syntax and unable to get the results I want. In my Cross Apply I used LAG to work out the 'PrevTech' but when pulling it into my main report, I get NULL. So I assume I am not doing the Cross Apply correctly.
DECLARE #DateFrom as DATE = '2019-05-20'
DECLARE #DATETO AS DATE = '2019-07-23'
----------------------------------------------------------------------------------
SELECT
AAD.Date
,ASM.ASM
,A.ASM as PrevASM
,ASM.KDGID2
,R.ResourceName
,R.ID_ResourceID
,A.ServiceOrderNumber
,CONCAT(EN.TECHVORNAME, ' ' , EN.TECHNACHNAME) as TechName
,A.PrevTech
,EN.TechnicianID
,AAD.ID_ActivityID
,SO.ServiceOrderNumber
,AAD.VisitNumber
,AAD.PlannedDuration
,AAD.ActualDuration
,AAD.PlannedDuration-AAD.ActualDuration as DIFF
,DR.Original_Duration
FROM
[Easy].[ASMTrans] AS ASM
INNER JOIN
[FS_OTBE].[EngPayrollNumbers] AS EN
ON ASM.KDGID2 = EN.KDGID2
INNER JOIN
[OFSA].[ResourceID] AS R
ON EN.TechnicianID = Try_cast(R.ResourceName as int)
INNER JOIN
[OFSDA].[ArchiveActivityDetails] as [AAD]
ON R.[ID_ResourceID] = AAD.ID_ResourceID
INNER JOIN
[OFSA].[ServiceOrderNumber] SO
ON SO.ID_ServiceOrderNumber = AAD.ID_ServiceOrderNumber
LEFT JOIN
[OFSE].[DurationRevision] DR
on DR.ID_ActivityID = AAD.ID_ActivityID
CROSS APPLY
(
SELECT
AD.Date
,AD.ID_CountryCode
,AD.ID_Status
,Activity_TypeID
,AD.ID_ActivityID
,AD.ID_ResourceID
,SO.ServiceOrderNumber
,ASM.ASM
,LAG(EN.TECHVORNAME+ ' '+EN.TECHNACHNAME) OVER (ORDER BY SO.ServiceOrderNumber,AD.ID_ActivityID) as PrevTech
,AD.VisitNumber
,AD.ID_ServiceOrderNumber
,AD.PlannedDuration
,AD.ActualDuration
,ROW_NUMBER() OVER (PARTITION BY AD.ID_ServiceOrderNumber Order by AD.ID_ActivityID,AD.Date) as ROWNUM
FROM
[Easy].[ASMTrans] AS ASM
INNER JOIN
[FS_OTBE].[EngPayrollNumbers] AS EN
ON ASM.KDGID2 = EN.KDGID2
INNER JOIN
[OFSA].[ResourceID] AS R
ON EN.TechnicianID = Try_cast(R.ResourceName as int)
INNER JOIN
[OFSDA].[ArchiveActivityDetails] as [AD]
ON R.[ID_ResourceID] = AD.ID_ResourceID
INNER JOIN
[OFSA].[ServiceOrderNumber] SO
ON SO.ID_ServiceOrderNumber = AD.ID_ServiceOrderNumber
WHERE
AAD.ID_ActivityID = AD.ID_ActivityID
AND
AD.ID_CountryCode = AAD.ID_CountryCode
AND AD.ID_Status = AAD.ID_Status
AND AD.ID_ResourceID = AAD.ID_ResourceID
AND AD.Activity_TypeID = AAD.Activity_TypeID
AND AD.ID_ServiceOrderNumber = AAD.ID_ServiceOrderNumber
AND AD.Date >= '2019-05-01'
) as A
WHERE
ASM.KDGID2
IN (50008323,50008326,50008329,50008332,50008335,50008338,50008341,50008344,50008347,50008350,50008353,50008356,50008359,50008362,50008365)
AND AAD.ID_Status = 1
AND AAD.ID_CountryCode = 7
AND AAD.Activity_TypeID=91
AND
(
AAD.[Date] BETWEEN IIF(#DateFrom < '20190520','20190520',#DateFrom) AND IIF(#DateTo < '20190520','20190520',#DateTo))
AND AAD.ActualDuration > 11
AND
(
(DR.Original_Duration >= 60)
OR
(DR.ID_ActivityID IS NULL AND AAD.PlannedDuration >= 60))
I expect to see the previous Tech and previous Area Sales Manager for the job that was Manually Ammended.
Business Reason: Managers want to see who initially requested for the job to be Manually Ammended. The time requested is being over estimated which is wasting time. To plan better they need to see who requests extra time at a job and try to reduce the time.
I will attach the ArchiveActivityDetail table showing the history of a Repair Order as well as expected results.
Your query results in the cross apply will appear as a table in your query, so you can use top(1) and order by descending to get the first row ordered by what you want (it looks like ActivityId? maybe VisitNumber?).
Simplifying to get at the root of the issue, say you have just one table with ServiceOrderNumber, ID_Activity, ASM, and TECH. To get the previous row for activity 2414073 you would do this:
select top(1) ASM, TECH
from OFSDA.ArchiveActivityDetails as AD
where ID_ServiceOrderNumber = 2370634229 -- same ServiceOrderNumber
and ID_Activity < 2414073 -- previous activities
order by ID_Activity desc -- highest activity less than 2414073
Instead of cross apply, you probably want to use outer apply. This is the same but you will get a row in your main query for the first activity, it will just have nulls for values in your apply. If you want the first row omitted from your results because it doesn't have a previous row, go ahead and use cross apply.
You can just put the above query into the parenthesis in outer apply() and add an alias (Previous). You link to the values for the current row in your main query, use top(1) to get the first row only, and order by ID_Activity descending to get the row with the highest ID_Activity.
select ASM, TECH,
PreviousASM, PreviousTECH
from OFSDA.ArchiveActivityDetails as AD
outer apply (
select top(1) ADInner.ASM as PreviousASM, ADInner.TECH as PreviousTECH
from OFSDA.ArchiveActivityDetails as ADInner
where ADInner.ID_ServiceOrderNumber = AD.ID_ServiceOrderNumber
and ADInner.ID_Activity < AD.ID_Activity
order by ADInnerID_Activity desc
) Previous
where ID_ServiceOrderNumber = 2370634229
In the following query I am trying to get TotalQty to SUM across both the locations for item 6112040, but so far I have been unable to make this happen. I do need to keep both lines for 6112040 separate in order to capture the different location.
This query feeds into a Jasper ireport using something called Java.Groovy. Despite this, none of the PDFs printed yet have been either stylish or stained brown. Perhaps someone could address that issue as well, but this SUM issue takes priority
I know Gordon Linoff will get on in about an hour so maybe he can help.
DECLARE #receipt INT
SET #receipt = 20
SELECT
ent.WarehouseSku AS WarehouseSku,
ent.PalletId AS [ReceivedPallet],
ISNULL(inv.LocationName,'') AS [ActualLoc],
SUM(ISNULL(inv.Qty,0)) AS [LocationQty],
SUM(ISNULL(inv.Qty,0)) AS [TotalQty],
MAX(CAST(ent.ReceiptLineNumber AS INT)) AS [LineNumber],
MAX(ent.WarehouseLotReference) AS [WarehouseLot],
LEFT(SUM(ent.WeightExpected),7) AS [GrossWeight],
LEFT(SUM(inv.[Weight]),7) AS [NetWeight]
FROM WarehouseReceiptDetail AS det
INNER JOIN WarehouseReceiptDetailEntry AS ent
ON det.ReceiptNumber = ent.ReceiptNumber
AND det.FacilityName = ent.FacilityName
AND det.WarehouseName = ent.WarehouseName
AND det.ReceiptLineNumber = ent.ReceiptLineNumber
LEFT OUTER JOIN Inventory AS inv
ON inv.WarehouseName = det.WarehouseName
AND inv.FacilityName = det.FacilityName
AND inv.WarehouseSku = det.WarehouseSku
AND inv.CustomerLotReference = ent.CustomerLotReference
AND inv.LotReferenceOne = det.ReceiptNumber
AND ISNULL(ent.CaseId,'') = ISNULL(inv.CaseId,'')
WHERE
det.WarehouseName = $Warehouse
AND det.FacilityName = $Facility
AND det.ReceiptNumber = #receipt
GROUP BY
ent.PalletId
, ent.WarehouseSku
, inv.LocationName
, inv.Qty
, inv.LotReferenceOne
ORDER BY ent.WarehouseSku
The lines I need partially coalesced are 4 and 5 in the above return.
Create a second dataset with a subquery and join to that subquery - you can extrapolate from the following to apply to your situation:
First the Subquery:
SELECT
WarehouseSku,
SUM(Qty)
FROM
Inventory
GROUP BY
WarehouseSku
Now apply to your query - insert into the FROM clause:
...
LEFT JOIN (
SELECT
WarehouseSKU,
SUM(Qty)
FROM
Inventory
GROUP BY
WarehouseSKU
) AS TotalQty
ON Warehouse.WarehouseSku = TotalQty.WarehouseSku
Without seeing the actual schema DDL it is hard to know the exact cardinality, but I think this will point you in the right direction.
I am writing a sql query to get data from different tables but it is getting data from different tables very slowly.
Approximately above 2 minutes to complete.
What i am doing is here :
1. I am getting data differences and on behalf of date difference i am getting account numbers
2. I am comparing tables to get exact data i need.
here is my query
select T.accountno,
MAX(T.datetxn) as MxDt,
datediff(MM,MAX(T.datetxn), '2011-6-30') as Diffs,
max(P.Name) as POName
from Account_skd A,
AccountTxn_skd T,
POName P
where A.AccountNo = T.AccountNo and
GPOCode = A.OfficeCode and
Code = A.POCode and
A.servicecode = T.ServiceCode
group by T.AccountNo
order by len(T.AccountNo) DESC
please help that how i can use joins or any other way to get data within very less time say 5-10 seconds.
Since it appears you are getting EVERY ACCOUNT, and performance is slow, I would try by creating a prequery by just account, then do a single join to the other join tables something like..
select
T.Accountno,
T.MxDt,
datediff(MM, T.MxDt, '2011-6-30') as Diffs,
P.Name as POName
from
( select T1.AccountNo,
Max( T1.DateTxn ) MxDt
from AccontTxn_skd T1
group by T1.AccountNo ) T
JOIN Account_skd A
on T.AccountNo = A.AccountNo
JOIN POName P
on A.POCode = P.Code <-- GUESSING as you didn't qualify alias.field
AND A.OfficeCode = P.GPOCode <-- in your query for these two fields
order by
len(T.AccountNo) DESC
You had other elements based on the T.ServiceCode matching, but since you are only grouping on the account number anyhow, did it matter which service code was used? Otherwise, you would need to group by both the account AND service code (which I would have added the service code into the prequery and added as join condition to the account table too).