I've got a system that generates and automatically maintains lots of spreadsheets on a Drive account.
Whenever I add data to the sheet I run a 'format' method to pass over and make sure everything is ok.
This generally does things like:
set the default font and size across the sheet
set up the heading row
freeze rows
In addition, I have the code below to make sure the first two columns (index 0 and 1) in the sheet are autoresizing to fit their contents. when I run it though, this element doesn't seem to make a difference. The font, column freezes etc all work.
Other notes:
I only want those 2 columns to auto-resize
the amount of rows in a sheet can vary
this job is appended to the end of several in requestList
My code:
requestList.Requests.Add(new Google.Apis.Sheets.v4.Data.Request()
{
AutoResizeDimensions = new AutoResizeDimensionsRequest()
{
Dimensions = new DimensionRange()
{
SheetId = Convert.ToInt32(sheetId),
Dimension = "COLUMNS",
StartIndex = 0,
EndIndex = 1
}
}
});
var updateRequest = sheetService.Spreadsheets.BatchUpdate(requestList, spreadSheetId);
var updateResponse = updateRequest.Execute();
Could the order which I request the 'format' changes be affecting things maybe? Can anyone help?
As written in the documentation,
the start index is inclusive and the end index is exclusive.
So, For the first two columns, it should be
startIndex = 0,
endIndex = 2
Related
I'm trying to run through a few hundred rows of data and delete rows that have 0 in both C and D. Deleting the ones that match that case seems to be working, but it really takes its time getting through. I'm a neophyte at scripting (I'm not a programmer, just trying to learn) and I can't figure how to make it faster. The main script came from someone else, I added the logic to do two columns and not just one. Any Ideas?
function deleteZeroes() {
var ss = SpreadsheetApp.getActiveSpreadsheet();
var s = ss.getSheetByName('Email_Help_Total_Input');
var range1 = s.getRange('C:C');
var cValues = range1.getValues();
var range2 = s.getRange('D:D');
var dValues = range2.getValues();
for(var i=cValues.length-1;i>=0;i--)
if(cValues[0,i]==0 && dValues[0,i]== 0)
s.deleteRow(i+1);
}
It works, but slowly. Just trying to make it a little quicker. Thanks!
Array rather than reads and writes!
data = s.getDataRange().getValues();
result = [];
for (i=0;i<data.length;i++) {
if (data[i][2]==0) continue; //checks C, if it finds it continues the loop
if (data[i][3]==0) continue; //checks D, if it finds it continues the loop
result.push(data[i]);//only those that fell through the 0 checks will be here
}
s.getDataRange().clear();
s.getRange(1,1,result.length,result[0].length).setValues(result);
So this reads all the data at once, checks all the data and copies the good rows to a new result array, deletes the old data and then pastes back the good data. Depending on the size you should see this function in maybe 30 seconds.
I'm running into strange problem with .Net version of POI library for Excel Spreadsheets. I'm rewriting from text files to Excel 97-2003 documents and I'm like to add some formatting programmatically depend on some values gather at the begging of the program.
At the beginning, in the same method where I was creating a new cell from given value I was creating also a new Workbook CellStyle which was wrong, because I was running out of the styles very quickly (or I was just thought it was the cause of the problem).
Constructor of the class responsible for Excel Workbook:
public OldExcelWriter(TextWriter logger) : base(logger)
{
_workbook = new HSSFWorkbook();
_sheetData = _workbook.CreateSheet("sheet1");
_creationHelper = _workbook.GetCreationHelper();
}
Method that is calling all the chains of operations:
public void Write(string path, Data data)
{
FillSpreadSheetWithData(data, _sheetData);
SaveSpreadSheet(_workbook, path);
}
Long story short, in FillSpreadSheetWithData I have method for creating a row inside which I'm have a loop for each cell, so basically I'm iterating thru every column, passing IRow references to a row, column value, index and formatting information like this:
for (int j = 0; j < column.Count; j++)
{
CreateCell(row, column[j], j, data.Formatting[j]);
}
and while creating a new styles (for first shot I was trying to pass some date time values) I had situation like this in my rewrited Excel: screenshot of excel workbook
So formatting was passed correctly (also Horizontal Aligment etc.) but it get ugly after 15th row (always the same amount).
DateTime dataCell = DateTime.MaxValue;
var cell = row.CreateCell(columnIndex);
_cellStyle = _workbook.CreateCellStyle();
switch (format.Type)
{
case DataType.Date:
_cellStyle.DataFormat = _creationHelper.CreateDataFormat().GetFormat("m/dd/yyyy");
if (value.Replace("\n", "") != string.Empty)
{
dataCell = DateTime.ParseExact(value.Replace("\n", ""), "m/dd/yyyy",
System.Globalization.CultureInfo.InvariantCulture);
}
break;
}
switch (format.HorizontalAlignment)
{
case Enums.HorizontalAlignment.Left:
_cellStyle.Alignment = HorizontalAlignment.LEFT;
break;
case Enums.HorizontalAlignment.Center:
_cellStyle.Alignment = HorizontalAlignment.CENTER;
break;
}
if (dataCell != DateTime.MaxValue)
{
cell.CellStyle = _cellStyle;
cell.SetCellValue(dataCell);
dataCell = DateTime.MaxValue;
}
else
{
cell.CellStyle = _cellStyle;
cell.SetCellValue(value);
}
(It's not the cleanest code but I will don refactor after getting this work).
After running into this issue I thought that maybe I will create _cellStyle variable in the constructor and only change it's value depends on the case, because it's assigned to the new cell anyway and I see while debugging that object values are correct.
But after creating everything, it won't get any better. Styles was override by the last value of the style, and dates are spoiled also, but later: screnshoot of excel workbook after creating one instance of cell style
I'm running out of ideas, maybe I should create every combination of the cell styles (I'm using only few data formats and alignments) but before I will do that (because I'm running out of easy options right now) I wonder what you guys think that should be done here.
cell format is set to custom with date type
I am using this code to create my custom style and format. Its for XSSF Format of excel sheet. but it will work for HSSF format with some modification.
XSSFFont defaultFont = (XSSFFont)workbook.CreateFont();
defaultFont.FontHeightInPoints = (short)10;
defaultFont.FontName = "Arial";
defaultFont.Color = IndexedColors.Black.Index;
defaultFont.IsBold = false;
defaultFont.IsItalic = false;
XSSFCellStyle dateCellStyle = (XSSFCellStyle)workbook.CreateCellStyle();
XSSFDataFormat dateDataFormat = (XSSFDataFormat)workbook.CreateDataFormat();
dateCellStyle.SetDataFormat(dateDataFormat.GetFormat("m/d/yy h:mm")); //Replace format by m/dd/yyyy. try similar approach for phone number etc.
dateCellStyle.FillBackgroundColor = IndexedColors.LightYellow.Index;
//dateCellStyle.FillPattern = FillPattern.NoFill;
dateCellStyle.FillForegroundColor = IndexedColors.LightTurquoise.Index;
dateCellStyle.FillPattern = FillPattern.SolidForeground;
dateCellStyle.Alignment = HorizontalAlignment.Left;
dateCellStyle.VerticalAlignment = VerticalAlignment.Top;
dateCellStyle.BorderBottom = BorderStyle.Thin;
dateCellStyle.BorderTop = BorderStyle.Thin;
dateCellStyle.BorderLeft = BorderStyle.Thin;
dateCellStyle.BorderRight = BorderStyle.Thin;
dateCellStyle.SetFont(defaultFont);
//Apply your style to column
_sheetData.SetDefaultColumnStyle(columnIndex, dateCellStyle);
// Or you can also apply style cell wise like
var row = _sheetData.CreateRow(0);
for (int cellIndex = 0;cellIndex < TotalHeaderCount;cellIndex++)
{
row.Cells[cellIndex].CellStyle = dateCellStyle;
}
I am building a spreadsheet that tracks work in progress as it moves through steps of a manufacturing process.
Each step of the process has a column with the total parts moved to each stage. To the left of this column is a column for number of parts moved to the stage (parts move through a few at a time).
My scrpit then takes the values in the "add" column, adds them to the "total" column, then reset the "add" column to "".
Here's the code:
function addColumns() {
var ss = SpreadsheetApp.getActiveSpreadsheet();
// ss is now the spreadsheet the script is associated with
var sheet = ss.getSheets()[0]; // sheets are counted starting from 0
// sheet is the first worksheet in the spreadsheet
for (var i=4; i<500; i++ ) {
if(sheet.getRange(i,1).getValue()>0){ //Only run if order number not empty
//Breakout Column
var add = sheet.getRange(i,6);
var total = sheet.getRange(i,7);
total.setValue(total.getValue() + add.getValue());
add.setValue("");
//CNC Column
var add = sheet.getRange(i,8);
var total = sheet.getRange(i,9);
total.setValue(total.getValue() + add.getValue());
add.setValue("");
//CutSand Column
var add = sheet.getRange(i,10);
var total = sheet.getRange(i,11);
total.setValue(total.getValue() + add.getValue());
add.setValue("");
//Lasered Column
var add = sheet.getRange(i,12);
var total = sheet.getRange(i,13);
total.setValue(total.getValue() + add.getValue());
add.setValue("");
//To Finishing Column
var add = sheet.getRange(i,14);
var total = sheet.getRange(i,15);
total.setValue(total.getValue() + add.getValue());
add.setValue("");
// Defective Column
var add = sheet.getRange(i,17);
var total = sheet.getRange(i,18);
total.setValue(total.getValue() + add.getValue());
add.setValue("");
//Etsy Column
var add = sheet.getRange(i,20);
var total = sheet.getRange(i,21);
total.setValue(total.getValue() + add.getValue());
add.setValue("");
}
if(sheet.getRange(i,4).getValue()<1){i=500} //Once you find a blank order exit the loop
}
}
My code as written does accomplish this; it does exactly what I need. The problem is that since the code is accessing the spreadsheet on each loop it takes almost a full second per cell to run, and with 7 steps per order it can take minutes at a time to run through with lots of orders...
This is a pretty simple mathematical task, so there has to be a more efficient way of doing it, I just haven't been able to find the right keywords to describe what I need to do.
I am quite happy to learn whatever needs to be done, just need to know what direction to head.
Thanks in advance!
I would suggest to do something like this: (not tested)
function addColumns() {
var sheet = SpreadsheetApp.getActiveSpreadsheet().getSheets()[0]; // Refers to the first worksheet in the spreadsheet
var data = sheet.getDataRange().getValues(); // Acquires all values of the sheet
for (var i = 3; i < data.length; i++) { // Loop over every row
if (data[i][0].length > 0) { // Check if first column has a value
// Breakout
sheet.getRange(i+1,7).setValue(parseFloat(data[i][6]) + parseFloat(data[i][5]));
sheet.getRange(i+1,6).clear();
// Repeat code above for other columns
}
}
}
This code acquires all the data from the sheet instead of looping over a fixed amount of 500 rows. Assuming that your data starts at row 4, I've implemented this in the code above as well.
Variable data acquires all the data at one moment instead of trying to fetch values of every range (cell) all the time. I expect that this will save your script quite some time.
Because we acquire the data at once, the script sees the value as a string. Before we calculate the new value of the total column, we parse the value as a float (a number with decimals).
The code above is not tested as I don't have a sheet ready in the same format as you do but I think the logic is clear and if it doesn't work I suppose you should be able to adjust it to work for your sheet.
I'm trying to store a value using google cache services but it doesn't seem to increment like I want it to. Here's the code -
//Starts a new instance of cache
var cache = CacheService.getScriptCache();
//Puts the value 2 into foo key of Cache
cache.put('foo', 2);
//Grabs that value
var startMessageRow = cache.get('foo');
//stuff for an email I'm sending using this cached value
var messageDataRange = sheet.getRange(startMessageRow, 2)
var message = messageDataRange.getValues();
//Here's where I'm trying to increment it, but the value is staying at 2
cache.put('foo','startMessageRow'+1);
That last line of code is where I'm trying to increment the value by one each time this script runs, however the value is just stuck at two no matter what I try.
I found an easier way to do this. I just put a counter in a random cell and then I just add one to that value every time my script runs. Way easier than using the cache services!
var cellRange = s1.getRange("W726"); //set this string to be the corresponding cell for daily counter
var cell = cellRange.getValues(); //grabs the value from that cell
var startMessageRow = cell; //sets StartMessage Row to be equal to the value of counter
startMessageRow = parseInt(startMessageRow);//ints it
cell = parseInt(cell); //ints it
cell+=1; //increments
cell = cell+""; // strings it
cellRange.setValue(cell); // puts the new value in
In my app i use ios-charts library (swift alternative of MPAndroidChart).
All i need is to display line chart with dates and values.
Right now i use this function to display chart
func setChart(dataPoints: [String], values: [Double]) {
var dataEntries: [ChartDataEntry] = []
for i in 0..<dataPoints.count {
let dataEntry = ChartDataEntry(value: values[i], xIndex: i)
dataEntries.append(dataEntry)
}
let lineChartDataSet = LineChartDataSet(yVals: dataEntries, label: "Items count")
let lineChartData = LineChartData(xVals: dataPoints, dataSet: lineChartDataSet)
dateChartView.data = lineChartData
}
And this is my data:
xItems = ["27.05", "03.06", "17.07", "19.09", "20.09"] //String
let unitsSold = [25.0, 30.0, 45.0, 60.0, 20.0] //Double
But as you can see - xItems are dates in "dd.mm" format. As they are strings they have same paddings between each other. I want them to be more accurate with real dates. For example 19.09 and 20.09 should be very close. I know that i should match each day with some number in order to accomplish it. But i don't know what to do next - how i can adjust x labels margins?
UPDATE
After small research where i found out that many developers had asked about this feature but nothing happened - for my case i found very interesting alternative to this library in Swift - PNChart. It is easy to use, it solves my problem.
The easiest solution will be to loop through your data and add a ChartDataEntry with a value of 0 and a corresponding label for each missing date.
In response to the question in the comments here is a screenshot from one of my applications where I am filling in date gaps with 0 values:
In my case I wanted the 0 values rather than an averaged line from data point to data point as it clearly indicates there is no data on the days skipped (8/11 for instance).
From #Philipp Jahoda's comments it sounds like you could skip the 0 value entries and just index the data you have to the correct labels.
I modified the MPAndroidChart example program to skip a few data points and this is the result:
As #Philipp Jahoda mentioned in the comments the chart handles missing Entry by just connecting to the next data point. From the code below you can see that I am generating x values (labels) for the entire data set but skipping y values (data points) for index 11 - 29 which is what you want. The only thing remaining would be to handle the x labels as it sounds like you don't want 15, 20, and 25 in my example to show up.
ArrayList<String> xVals = new ArrayList<String>();
for (int i = 0; i < count; i++) {
xVals.add((i) + "");
}
ArrayList<Entry> yVals = new ArrayList<Entry>();
for (int i = 0; i < count; i++) {
if (i > 10 && i < 30) {
continue;
}
float mult = (range + 1);
float val = (float) (Math.random() * mult) + 3;// + (float)
// ((mult *
// 0.1) / 10);
yVals.add(new Entry(val, i));
}
What I did is fully feed the dates for x data even no y data for it, and just not add the data entry for the specific xIndex, then it will not draw the y value for the xIndex to achieve what you want, this is the easiest way since you just write a for loop and continue if you detect no y value there.
I don't suggest use 0 or nan, since if it is a line chart, it will connect the 0 data or bad things will happen for nan. You might want to break the lines, but again ios-charts does not support it yet (I also asked a feature for this), you need to write your own code to break the line, or you can live with connecting the 0 data or just connect to the next valid data.
The down side is it may has performance drop since many xIndex there, but I tried ~1000 and it is acceptable. I already asked for such feature a long time ago, but it took lot of time to think about it.
Here's a function I wrote based on Wingzero's answer (I pass NaNs for the entries in the values array that are empty) :
func populateLineChartView(lineChartView: LineChartView, labels: [String], values: [Float]) {
var dataEntries: [ChartDataEntry] = []
for i in 0..<labels.count {
if !values[i].isNaN {
let dataEntry = ChartDataEntry(value: Double(values[i]), xIndex: i)
dataEntries.append(dataEntry)
}
}
let lineChartDataSet = LineChartDataSet(yVals: dataEntries, label: "Label")
let lineChartData = LineChartData(xVals: labels, dataSet: lineChartDataSet)
lineChartView.data = lineChartData
}
The solution which worked for me is splitting Linedataset into 2 Linedatasets. First would hold yvals till empty space and second after emptyspace.
//create 2 LineDataSets. set1- till empty space set2 after empty space
set1 = new LineDataSet(yVals1, "DataSet 1");
set2= new LineDataSet(yVals2,"DataSet 1");
//load datasets into datasets array
ArrayList<ILineDataSet> dataSets = new ArrayList<ILineDataSet>();
dataSets.add(set1);
dataSets.add(set2);
//create a data object with the datasets
LineData data = new LineData(xVals, dataSets);
// set data
mChart.setData(data);