I tried to pip install tfx==0.13.0 on windows 10 machine and I get this error has anyone been able to pip install tfx==0.13.0
Could not find a version that satisfies the requirement ml-metadata<0.14,>=0.13.2 (from tfx==0.13.0) (from versions: 0.12.0.dev0, 0.13.0.dev0, 0.13.1.dev0) No matching distribution found for ml-metadata<0.14,>=0.13.2 (from tfx==0.13.0)
As suggested by Tensorflow Support in comments TFX does not support windows as of now.
Curently it supports both Linux and MacOS only.
Latest stable tfx version is 0.25.0 and tested python versions are 3.6 and 3.7.
Related
i have installed 3.10 version of python and now facing problem to inastall tensorflow C:\Python\python310>pip install tensorflow ERROR: Could not find a version that satisfies the requirement tensorflow (from versions: none)
Tf-nightly Python3.10 wheels supports Linux and MacOS. You can get them via pip install tf-nightly on the corresponding operating system.
Take a look at this #comment
updated code to work with tensorflow 2.4 to get around issue
I'm trying to install Tensorflow 1.9 on a Raspberry Pi as it is a requirement of the code I want to run. It installs fine on my Macbook using pip install tensorflow==1.9.0, but on the Pi I get the error:
Could not find a version that satisfies the requirement tensorflow==1.9.0 (from versions: 0.11.0, 1.11.0, 1.12.0, 1.13.1, 1.14.0)
No matching distribution found for tensorflow==1.9.0
I'm using a Conda (miniconda3) environment with Python 3.6.
Would using Ubuntu Desktop instead of Raspberry Pi OS work maybe? Or is there perhaps a way to build it from https://github.com/tensorflow/tensorflow/tree/r1.9?
You need to install python version 3.6 or other compatible versions in conda. Tensorflow does not work on versions higher than 3.8 and has identified issues with some other versions. I recommend using python 3.6 through conda. You will also probably need to move the
libcrypto-1_1-x64.dll
libssl-1_1-x64.dll
files from anaconda3\Library\bin to anaconda3/DLLs. You can find more details about this issue if you run into it here.
Hope this answers your question!
To install Tensorflow on Raspberry Pi run:
sudo apt install libatlas-base-dev
and then
pip3 install tensorflow
You can also compilte TensorflowLite and use if you wish. The compile TensorflowLite on RPi refer this link
When I try to install tensorflow on python 3.9 I get following error:
ERROR: Could not find a version that satisfies the requirement tensorflow (from versions: none)
ERROR: No matching distribution found for tensorflow
Is not there any tensorflow for 3.9?
What do you guys recommend?
Can I install other version of python beside the existing version?
Right now tensorflow does not have a build for python3.9
The latest one is for python3.8
You can check the build files at PyPI
https://pypi.org/project/tensorflow/#files
yes, you can install another version of python.
The original poster did not mention what type of computer or operating system he was using while attempting to install TensorFlow alongside Python 3.9. The error could be linked to working on a 64-bit Mac with the M1 chip (I recently experienced the same error described above while working on a Mac M1 in a Miniconda environment with Python 3.9.13). I solved the error by running
python3 -m pip install tensorflow-macos
from Terminal (in the Miniconda environment). TensorFlow installed normally alongside Python 3.9.13.
I do recommend installing Miniconda (or Anaconda as others have suggested), because it will allow you to easily create development environments with whatever version of Python modules or dependencies you require at the moment. See https://docs.conda.io/en/latest/miniconda.html. The larger Anaconda comes with a user-friendly 'Navigator' GUI which enables you to choose which environment is used to open a Jupyter notebook or other development environment, several of which come with Anaconda. See https://docs.anaconda.com/anaconda/install/
This is terrible with newer versions of Python that are not compatible with the machine learning module package.
So my approach is to keep the existing version 3.9 and the computer is using Anaconda to install a virtual environment with 3.7. When using vscode or pycharm, just remember to set it to that 3.7 Python environment.
I am using the Graphical Interface of Anaconda. I tried to install py-xgboost but it gave me the following error-
*UnsatisfiableError: The following specifications were found
to be incompatible with the existing python installation in your environment:
Specifications:
py-xgboost -> python[version='>=2.7,<2.8.0a0|>=3.6,<3.7.0a0|>=3.7,<3.8.0a0|>=3.5,<3.6.0a0']
Your python: python=3.8
If python is on the left-most side of the chain, that's the version you've asked for.
When python appears to the right, that indicates that the thing on the left is somehow
not available for the python version you are constrained to. Note that conda will not
change your python version to a different minor version unless you explicitly specify
that.*
It says I have python 3.8 installed in my system but when I checked the python version on my system using the command python2 --version & python3 --version it says I have python 2.7.16 & python 3.7.3
I dont have python 3.8
What shall I do now? The above python version were there already. I never installed and someone told me not to remove those versions as some of the MAC applications are dependent on them. Its a MAC BOOK PRO 15 ( 2019 )
After some research I found a solution. I had to downgrade my python version.
But as explained above when I tried to check the version of python I am using I was getting 2.7 & 3.7.3 but my ANACONDA gives an error that I have version 3.8
That was because Anaconda uses the python which is installed in a separate directory, it was not using the python installed at the PATH directory. So I had to downgrade python which the ANACONDA was using by using the command -
conda search python
BTW if your terminal says conda command not found, then you need to edit your PATH first.
Then it gives a list of python version, you can then see which version is right for your XGboost version and then use the command-
conda install python=3.7.7
or whatever version you wanted to use.
After the downgrade of python, anaconda will ask you to downgrade other libraries as well, so go ahead and do that too unless you are using some command which was not there in the older version.
Now install py-xgboost from ANACONDA Graphical interface or by using conda method
conda install -c anaconda py-xgboost
Was happy to know Tensorflow is made available for Windows and we don't have to use Docker.
I tried to install as per instructions but I get this error.
pip install --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-0.12.0rc0-cp35-cp35m-win_amd64.whl
tensorflow-0.12.0rc0-cp35-cp35m-win_amd64.whl is not a supported wheel on this platform.
What does that error mean?
I am running latest version of Python.
python --version
Python 3.5.2
This is most likely to be a 64-bit versus 32-bit issue. The pre-built TensorFlow pip package is 64-bit only, but the default version of Python 3.5.2 on Python.org is 32-bit. You can download the 64-bit release from here (select one of the "Windows x86-64" options).
It's only available for Python 3.5.x not 3.6.
You can quickly create a 3.5 environment with:
conda create -n tensorflow python=3.5
You must have a 3.5.x version of Python. The 3.6 version won't work.
If you have installed an Anaconda that contains Python 3.6, you need to downgrade its Python to 3.5.2.
Open the Anaconda Prompt as administrator, and run:
conda install python=3.5.2
After the installation is finished, you can follow the rest of the steps on tensorflow website.
Do you have Python and Anaconda installed? I had a similar issue until I uninstalled Anaconda and then the setup was fine.
I did the following steps and it worked.(Anaconda 4.4 x64)
1- Go to Windows 10 command prompt (right click and Run as admin)
2- if activated the path, you can run conda anywhere, if not, should go to .../anaconda3/scripts and run conda command from there and do the following (the main trick was to change 35 to 36)
1- conda -n tensorflow python=3.5
2- activate tensorflow
3- pip install --upgrade https://storage.googleapis.com/tensorflow/windows/cpu/tensorflow-0.12.0rc0-cp36-cp36m-win_amd64.whl
issues fixed when i did the downgrading from 3.6 to 3.5 using the below
conda install python=3.5.2
There can be two reasons:
1) You are using 32-Bit python package. Tensorflow does not support 32 bit, only 64 fit.
Check in your system settings for this. If this is fine refer to second point..
2)You are using Python 3.7.
Python 3.7 isn't eventually officially supported by Python. It's still in beta testing,
and very much under active development.
Consider downgrading to a lower version of python. For now, stick with Python 3.6 or 3.5.