I'm building a dashboard in power bi and I have a dataset with a few percentages. There are several categories of data, but only one category is shown at a time. What I want to do is to dynamically change the y-axis values to reflect the data. At the moment, it's done automatically, but it makes the data look "worse" than it is, so I want to take the min and the max for that one category and add let's say another 10-20% to it, and use those values as the new scale. For example, if my data starts at 41% and ends at 63%, power bi automatically scales the chart between around 40% and 65%. I want to take these values, add 10% on each side and have the chart start at 30% up to 75% (roughly).
Is there a way to do this?
Thanks
If your visual is a line diagram then you can solve it by adding two additional measures to the plot:
y_top = MAX([pct_measure])+0,1
y_bottom = MIN([pct_measure])-0,1
Add both to the line diagram and then set their line widths to 0.
It's a variation of this:
Power Bi Tips - Center X-axis on a line chart
Related
So, it's my first time trying to make my own data visualization, and what I want to do is something like a heat map or highlighted table like the original Kohonen (but using squares rather than hexagons) research about countries, but I don't know how to apply it to the map I've got from training the network.
I've read a few links about making a highlighted table and heat map on Tableau, but what I get is always just a table mainly because I'm not using a measure (i just want every country of one color), so, my question is: is it possible to use Tableau for this situation and if so, how could I do it? Thanks!
Original SOM visualization from Dr. Kohonen
Table from Tableau
Yes it is possible to make visualizations like you describe in Tableau - but the question you posed is a bit vaguely specified to give you much more detailed guidance than first take some Tableau training.
For instance, how do you want to determine which row and column to place a country? You may need to write a table calc for row and col positions, which means learning about table calcs. Or you can assign them in a data column.
For square country marks, you'll want a discrete field on the rows shelf, a discrete field on the columns shelf, possible a dimension like Country name on the details shelf. Choose a square mark type, and (important) choose a square cell size from the format menu. Then adjust the size of your squares from the size button and the format menu, and colors and borders from the color button and format pane.
Lots to play with.
I am trying to create multi-line subplots such that each subplot represents a rating factor on which firms are rated, and each line represents a firm's change in rating over time. Note that I don't have the date field. I have a string field that says which quarter of the year the Mean of ratings belong to.
I'm new to tableau and I created something like this:
I want to create multiple subplots: one subplot for each of the 8 rating features in the above diagram, and the subplot has multiple lines representing the variation over time for each company. I have 10 companies.
Please guide me on how to achieve this?
A rough sketch of how I Imagine the plot to look like is below:
This will teach you how to make a panel chart in Tableau: https://tarsolutions.co.uk/blog/build-a-dynamic-panel-chart-in-tableau/
It shouldn't to too complex for what you're attempting (fingers crossed!).
Building the panel chart is a little tricky in Tableau. Not terribly hard once you understand table calcs. I suggest starting simpler by moving Measure Names from the Rows shelf to the Pages shelf, then creating the line charts you want - 1 per page. Then learn about table calc partitions and addressing, including “At the Level” to have the info needed to define the panels
To make a colored line chart,
You need one field on columns that you set to display as continuous, making it green. If it is a date field, right click on the field and choose from the second set of groups, like month or quarter.
You need a continuous field on the Rows shelf, use Measure Values in your case
Use a discrete field on color to determine the number of lines, say Shortname
Set the Mark Type to either Automatic or line
Looking to generate a series of dates and values on Power BI for which the first value and the increments depend on measures. (Dynamic series generation and then applying to visuals).
Tried do to this through a calculated column, however this was unsuccessful as the column is calculated before the filtering on the measure can occur - so it was providing me with undesired results.
I have also tried to use GENERATESERIES within a measure with UNION to combine the date and values series. However, I am then unable to plot this on a visual as I have multiple values for my measure.
Any help would be greatly appreciated.
Cheers
GDB007
As long as you have a fixed X-axis, you can certainly define the Y-values dynamically using measures that are dynamic.
For example:
In this example, I just defined the [StartValue] measure as a constant 1 but it could be whatever you like. The [Increment] measure here just reads in the value of a small parameter table I created to show multiple values simultaneously by dropping that column in the Legend field of the visual, but this could also be whatever you like.
Adding on my previous question here: TimeSeries question
I would like to plot a unit capacity chart over a Time series (which contains a range of dates set by the user).
The chart I am trying to plot is as follows:
For each Unit Name, I have start and end date for the unit capacities, as shown in the PowerBI table as below:
4 sub questions:
How to plot these capacities over time? Maybe using some DAX functions?
Do i need the SSAS cube to solve this problem or can I do all the work inside PowerBI desktop? If not, is there a better way for example in SSRS?
Is there a way to make the x-axis time series dynamic as specified by the user?
Adding to this, after Leonard's response. After converting the OutageStartDateOrig, and OutageEndDateOrig values I tried to create the calculated column as suggested in the youtube link {enter link description here}. However, the DAX formula as shown in the video gives out a syntax error for me stating that the '.' is incorrect when specifying the range of dates. Any ideas for this? [Screenshot below]:
To create such a visual, I'd recommend an area chart (or stacked area chart) with the date on the axis, the unit name on the legend, and the capacity on the values. You could also do it as a stacked column chart too. However, then each date will be broken into discrete columns. See below image.
In terms of data manipulation, you'll need to convert the data with the date ranges you have above into a row for each individual date & unit. E.g. the first row, instead of being 11/2 to 13/2, would be expanded into 3 rows, one for each date.
You can do this in Power Query as you bring the data into Power BI Desktop, or in DAX after bringing it in. There are several solutions to this outlined in this thread (https://community.powerbi.com/t5/Desktop/Convert-date-ranges-into-list-of-dates/td-p/129418), but personally, I recommend the technique (and video) posted by MarcelBeug (https://youtu.be/QSXzhb-EwHM).
You'll also want an independent list of dates (with no gaps) to join the final date column to - otherwise your visual will skip dates when no units had capacity. By default, the chart will begin on the first date with data and end on the last date with data, so in that sense it is dynamic, but you can add a date slicer to give the end-user more control.
Area chart on top, column chart on bottom, date slicer on right filtering Jan-Mar.
I have a project that im working on at the moment in VB.
Basically I have a Data Table in VB it populates with 4 columns and a variable number of rows, the column names are as follows;
Gear, RPM, Speed, CO2
The data table appears in datagridview correctly but that's as far as I have gotten :/
What I am trying to do is to make a line chart called mainGraph to draw a graph based on these results, I'm getting stuck when trying to populate the chart.
ANY thoughts would be really appreciated.
I am guessing you are using the ms chart controls and not some 3rd party like Telerik.
This should be usefull http://blogs.msdn.com/b/alexgor/archive/2009/02/21/data-binding-ms-chart-control.aspx
Also, there is source code found at http://archive.msdn.microsoft.com/mschart/Release/ProjectReleases.aspx?ReleaseId=4418
in short this is a way to get things displayed
mainGraph.Series(0).ChartType = DataVisualization.Charting.SeriesChartType.Line
mainGraph.Series(0).Points.DataBind(yourDataTable.DefaultView, "Speed", yourDataTable.DefaultView, "Gear")
These commands should make a line graph with Speed on your x axis, and Gear on your Y. Assigned to "Series(0)"
To add more columns, you need to add more "Series"
mainGraph.Series.Add("RPM")
Do some thinking about how you want this data displayed.
how would you like to set this graph up?
I'm assuming you would want a line graph?
What is going to be the X axis? Is there a missing column that needs to be "time" in the data table?
do you want them all on one graph/chart area?
If you would like more charts, then you need to add chart areas. A series can be assigned to a chart area.
Hopefully this helps.