Can anyone help me, I need to retrieve only the very latest email in my exchange server inbox.
I don't need any other email to show up with the one I want.
But I'm stuck, since the farthest that I could get is only the email I received only today.
I use SearchFilter with DateTimeReceived :
Here's the snipped of my code for the filter :
Dim search As New SearchFilter.IsGreaterThanOrEqualTo(ItemSchema.DateTimeReceived, DateTime.Today.Date)
Thanks in advance.
Just sort your search results by the DateTimeReceived property, in descending order.
view.OrderBy.Add(ItemSchema.DateTimeReceived, SortDirection.Descending);
Then when you loop through the results, the first email will be the latest (and then you can jump out of the loop).
Related
I am using UiPath's Get Outlook Mail Messages component to obtain emails.
My only request has been to ignore any emails that are Replies, so contain "RE:"
In my email filters I had tried the below:
#SQL=urn:schemas:httpmail:subject NOT LIKE 'RE%'
Unfortunately, I receive the error "Get Outlook Mail Messages: Cannot parse condition. Error at "#SQL=((urn:schemas:httpmail:subject NOT ...".
When I try the filter: `
#SQL=urn:schemas:httpmail:subject LIKE 'RE%'
I am able to obtain all emails that contain 'RE:' but as specified, I want to omit these.
Would anyone be able to advise how to Omit these emails? I need to obtain every other email in the Inbox so makes more sense to just ignore the Replies.
Thanks,
Your code is very close to being correct. The NOT keyword does work, just the placement is incorrect, unlike normal SQL where the NOT would be before the LIKE, in this case it would come before the field name.
So rather than:
#SQL=urn:schemas:httpmail:subject NOT LIKE 'RE%'
It would be:
#SQL=NOT urn:schemas:httpmail:subject LIKE 'RE%'
I'm trying to filter emails on Exchange Web Services using SearchFilter.ContainsSubstring as follows:
sfilter = New SearchFilter.ContainsSubstring(EmailMessageSchema.Sender, EmailAddress, ContainmentMode.Substring, ComparisonMode.IgnoreCase)
MailItems = service.FindItems(Folder.Id, sfilter, view)
Unfortunately this doesn't work, and I don't want to use Queries, because I can't guarantee that I can use features of Exchange Server 2013.
Composing a variety of requests in Fiddler, I can observe that if I remove the last character of the email address, then the filter works, remove the first character instead, works - put them back, broken.
So perhaps it's pedantic, and it has to be a true substring to qualify, so if I change the Containment mode to FullString - it doesn't work, so I can't do anything like a collection with Substring OR FullString.
It looks like I'll be able to do (Substring with last char missing AND Substring with first char missing), but it surely can't be that broken can it?
What can I do to get this to work?
Note that my code is in VB.NET, but I can't imagine that this is the problem.
Cheers,
Mark
I worked out that the IsEqualTo filter works with From/Sender, and it doesn't care about case-sensitivity issues, so it's probably what I should have tried to begin with.
The code to match an email address is:
sfilter = New SearchFilter.IsEqualTo(EmailMessageSchema.From, New EmailAddress(Message.FromAddress))
MailItems = service.FindItems(FailureFolder.Id, sfilter, iv)
I still don't know how to find all emails from users at the same domain though.
More Info:
I really needed to filter by Sender Domain and did that by pulling the entire folder contents down and filtering in .Net code. Even that causes problems.
Basically to keep things quick and tight, I tried to pull all the data with a PropertySet:
New PropertySet(BasePropertySet.IdOnly, EmailMessageSchema.Sender)
Filtering still didn't work, yet email addresses still showed in my list of items view. Well it turns out that the value of Message.Sender contains some kind of ActiveDirecty path in it until you call LoadPropertiesForItems. After LoadPropertiesForItems, it's an email address.
Note that my earlier attempt to filter at the server was scuppered because filtering would have to occur against the ActiveDirectory path style of string.
This is all highly confusing, and not at all user friendly.
If anybody has any idea on how to filter by email domain at the server, let me know!
Mark
What is your goal? Sender isn't a string property, so I'm not surprised that the results are odd with ContainsSubstring. I tried it against Office 365 and it worked, but older versions of Exchange may not be as "smart" about handling this kind of query. Depending on what you're trying to achieve, there may be a better filter.
if(emailSenderList.size() == 1) {
return new SearchFilter.IsEqualTo(EmailMessageSchema.From, emailSenderList.get(0));
}
return new SearchFilter.SearchFilterCollection(LogicalOperator.Or, emailSenderList.stream().map(em -> new SearchFilter.IsEqualTo(EmailMessageSchema.From, em)).toArray(SearchFilter.IsEqualTo[] :: new));
I am trying to fetch gmail emails with IMAP (in objective-c), and I want to separate, for every thread, every single message that has been sent in the conversation. To make myself more clear, imagine a conversation like this one:
John says : Hi Mike, that's the first email
Mike replies : Hey John, how are you ?
John replies : Great Mike, thanks.
If I get John's emails through IMAP, I will fetch only one email, that will be :
Hey John, how are you ?
On Wed, 21 May,
Hi Mike, that's the first email
And I would like to get two different messages out of this one email I fetched.
First message would be "Hi Mike, that's the first email"
Second message would be "Hey John, how are you ?"
I looked at the message-id field in the header, but I can't figure out how to link that back to actual messages.
Any ideas?
Thanks !
[EDIT] : So far I can parse the email in John's inbox and extract the associated string containing the message. But what I want is the actual message (with the header and all), not just the string containing the message.
Gmail has a very nice IMAP extension to do this. I've never tried to use the objective-c libraries, though.
If you want to do this for one conversation, you need a message to start with. Any message in the conversation will do. First, you retrieve the X-GM-THRID of that message: a uid fetch 23451345 x-gm-thrid, which gives you a 64-bit number, perhaps 9876543876543444423. Next, you look for the other messages in the same conversation: b uid search x-gm-thrid 9876543876543444423, which gives you the UIDs of all messages in that conversation, and you're done.
If you want to do it for all the conversations in the inbox, you issue c uid fetch 1:* x-gm-thrid, which gives you a set of message-conversation tuples: "message 123 belongs to conversation 9876543876543".
If you want to order the messages within each conversation, the easiest way is probably to retrieve the internaldate item and sort by that. Gmail also has an x-gm-msgid but I haven't looked to see whether it's useful for sorting.
I'm using the YouTube Search API to grab 5 videos per time under a specific keyword. But I've been trying and trying, but couldent find the parameter for the start index. Does anyone know how to add it, so it gets the next 5 videos etc..?
Current URL I have:
https://www.googleapis.com/youtube/v3/search?part=snippet&q=wiz+khalifa&type=video&key=AIzaSyB9UW36sMDA9rja_J0ynSYVcNY4G25
In the results of your first query, you should get back a nextPageToken field.
When you make the request for the next page, you must send this value as the pageToken.
So you need to add pageToken=XXXXX to your query, where XXXXX is the value you received in nextPageToken.
Hope this helps
You can check here:
https://labs.aweber.com/docs/code_samples/subs/create
The script to add a new subscriber to the list via api requires those two pieces info...only I cannot figure out for the life of me what those two variables are!! I've beaten through every little aspect of my Aweber Subscriber Account, AND my Aweber Labs account...and I can't find any reference to either of those variables anywhere. I've submitted some tickets to them, and haven't gotten any response yet.
Does anyone have any ideas here? I've tried my account names, my list names, to no avail!
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Okay, I've got it! You can get the values of both of these variables by dumping some other variables in the aweber api after making certain api calls.
get the account id first:
$account = $aweber->getAccount($accessKey, $accessSecret);
then vardump or print_r $account.
next we get the list id:
$account = $aweber->getAccount($accessKey, $accessSecret);
$list_url = 'https://api.aweber.com/1.0/accounts/<id>/lists';
$lists = $account->loadFromUrl($list_url);
then vardump or print_r $lists.
And you are all set! I'm so happy I figured this out, it freakin took long enough. Hopefully this saves some one a bit of time.
I too have agonized over finding the $list_ID, so went to deactivate the list, and create a new one, and "discovered" that if you hover over the Deactivate button, you get a url you can copy, and this gives both %account and %list Ids
https://www.aweber.com/users/lists/deactivate/$accountID/$lisID
like this....
https://www.aweber.com/users/lists/deactivate/123456/123456
Hopefully this will help make someone as it is a super easy solution
The proper answer is Anne Allen's one, but...
Check the return of the /accounts endpoint. It should return the same account id as you detected in the link, but I had cases they were different (strange, isn't it?). Use the account id returned by the /accounts endpoint and other endpoints to retrieve lists, subscribers, etc. will start to work. It's like if some accounts have two ids, one partially works and the other fully works.
Let me tell you how to get $list_id value... login into your AWeber account and then create a new list copy only integer value from list's name.
At first, login.
1) click Reports>Settings. Your account ID will be displayed in the box,example: ?id=XXXXX
2) click List Options>List Settings. There you will see the list ID under the name.
p.s. To add subscriber, you can use this - Automatically add into aweber list