How can I save first column from first row from query to file without additional character?
When I save data like this:
EXEC xp_cmdshell 'BCP "SELECT ''xxx'' " queryout D:\file.txt -w -T -S OMD-MG\SQL2008R2'
I've got:
additional \r\n at the end of file
When I save data like that:
EXEC xp_cmdshell 'BCP "SELECT ''xxx'' " queryout D:\file.txt -N -T -S OMD-MG\SQL2008R2'
I've got:
additional characters at front of file I think this is length
I try many parameter without satisfied result
Is there other option to save data to file from query without designer or management studio with correct data?
-N is a native binary format where any nullable or variable length fields are preceeded by their length. If you use -N with a non nullable, fixed-width field it will not be preceeded by its length.
If you want text data without the newlines you could try -r '' to specify the row terminator which is \n by default, e.g.:
bcp "select 'xxx'" queryout test.txt -c -t '' -r ''
..at least in SQL Server 2016 CTP I'm seeing that BCP tries to add padding to varchar columns. If you convert to text it seems to work alright:
bcp "select convert(text, col) from table" queryout file -c -t '' -r ''
I am using below command line to run a SQL query using SQLCMD
sqlcmd -S Server -Q "select top 100 * From people" -d people -t 10
The table has 20 columns and when i look at output command line window wraps the text and makes it difficult to read.
I want my results to be displayed the same way it displays in SQL Server Management Studio (properly formatted). I am not looking for any grids, but i need all my columns to be displayed in row 1 and the results properly beneath.
Thanks in advance.
Answer
We can set the width of each column.
C:/> sqlcmd -S my_server
> :setvar SQLCMDMAXVARTYPEWIDTH 30
> :setvar SQLCMDMAXFIXEDTYPEWIDTH 30
> SELECT * from my_table
> go
We can also set it like this: sqlcmd -S my_server -y 30 -Y 30.
Details
SQLCMDMAXVARTYPEWIDTH (-y)
It limits the number of characters that are returned for the large variable length data type
SQLCMDMAXFIXEDTYPEWIDTH (-Y)
Limits the number of characters that are returned for the following data types
Note: setting -y has serious performance implications.
See https://learn.microsoft.com/en-us/sql/tools/sqlcmd-utility
Formatting issues usually pop up due to your console window.
One solution is to output to the file and use notepad/your favorite editor:
sqlcmd -S myServer -d myDB -E -Q "select top 100 * From people"
-o "output.txt"
This is how I isolated a scalar.
sqlcmd -S xxx.xxx.xxx.xxx,xxxxx -d MyDb -U myUser -P MyPassword -h -1 -W -Q "set NOCOUNT ON; select a from b where b.id='c'"
I am trying to import into SQL a text file using this BCP command:
bcp test.dbo.bcp2 in C:\Test\test.txt -c -t -SSQServer -U user -P
test1 -t \t -r\n -e C:\Test\error.txt
The text.txt file has \t as column delimiter and \n as row delimiter.
The error received is Unexpected EOF.
I can confirm that the SQL table has the right table definition so there should not be any conversion errors.
i think no need to put any delimiter have text which is well arranged example if you have data in the excel copy and paste it in the text file and run the command
BCP tablename in c:\test.txt -S server name -Uuserid -Ppassword -c
Using the following sqlcmd script:
sqlcmd -S . -d MyDb -E -s, -W -Q "select account,rptmonth, thename from theTable"
> c:\dataExport.csv
I get an csv output file containing
acctnum,rptmonth,facilname
-------,--------,---------
ALLE04,201406,Allendale Community for Senior Living-LTC APPL02,201406,Applewood Estates
ARBO02,201406,Arbors Care Center
ARIS01,201406,AristaCare at Cherry
Hill
. . .
(139 rows affected)
Is there a way to get rid of the dashed line under the column headers : -------,--------, but keep the column headers?
and also a way to get rid of the two lines used for the row count on the bottom?
I tries using parm -h-1 but that got rid of the column headers as well as the dashed line.
Solutions:
1) To remove the row count ("(139 rows affected)") you should use SET NOCOUNT ON statement. See ref.
2) To remove column headers you should use -h parameter with value -1. See ref (section Formatting Options).
Examples:
C:\Users\sqlservr.exe>sqlcmd -S(local)\SQL2012 -d Test -E -h -1 -s, -W -Q "set nocount on; select * from dbo.Account" > d:\export.txt.
or
C:\Users\sqlservr.exe>sqlcmd -S(local)\SQL2012 -d Test -E -h -1 -s, -W -Q "set nocount on; select * from dbo.Account" -o "d:\export2.txt"
The guy with the top answer didn't answer how to remove the dashed line. This is my awesome solution.
First include -h -1 which removes both the dashed line and header
Then before your select statement manually inject the header string that you need with a PRINT statement. So in your case PRINT 'acctnum,rptmonth,facilname' select..*...from...
Sorry I'm 4 years and 9 months late.
Use the following;
sqlcmd -S . -d MyDb -E -s, -h-1 -W -Q "set nocount on;select 'account','rptmonth', 'thename';select account,rptmonth, thename from theTable"
> c:\dataExport.csv
remove the header -h-1
remove row count [set nocount on;]
add header select [select 'account','rptmonth', 'thename';]
add your select [select account,rptmonth, thename from theTable;]
To remove the Row Count:
Add the below to your SQL statement
SET NOCOUNT ON;
To remove the hyphen row try the following upon successful execution:
findstr /v /c:"---" c:\dataExport.csv > c:\finalExport.csv
I use "---" as all my columns are over 3 characters and I never have that string in my data but you could also use "-,-" to reduce the risk further or any delimiter based on your data in place of the ",".
In my case worked well as :
type Temp.txt | findstr /v -- > DestFile.txt
In addition, if you want to query out all records in a table, you can code as
SET NOCOUNT ON;
SELECT SUBSTRING((SELECT ','+ COLUMN_NAME FROM
INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME=N'%table_name%' FOR XML
PATH('') ), 2, 9999);
SELECT * FROM %table_name%
Assign the above queries into a variable %query%. The the command will be looks like as below.
SQLCMD -h -1 -W -E -S %sql_server% -d %sql_dabase% -Q %query% -s"," -o output_file.csv
This is the one line solution, without doing anything inside the stored procedure to append the column headers:
sqlcmd -S . -d MyDb -E -s, -W -Q "select account,rptmonth, thename from theTable"
| findstr /v /c:"-" /b > "c:\dataExport.csv" & exit 0
What this does is it intercepts all console output and replaces the "-" char BEFORE it redirects to the output file. There is NO need to output to intermediary file. And you will need a one-liner command if you use an agent to run these commands remotely on the sql server machines, which most of the times are locked from hosting *.bat files (which you'd need for multiline commands).
I added the "exit 0" at the end to not fail the caller application overall. You may remove it starting "& exit 0" if you don't care about that.
This one liner is why I chose sqlcmd over bcp out, by the way. BCP, although optimized for speed, cannot output column headers unless doing the ugly trick within the stored proc, to append them there as a union all.
Just in case you have access to writing a bat file that contains this one liner, you MUST add #ECHO OFF before it. Otherwise the console output will also have the actual command.
Hope it helps.
With SQL Server 2017 (14.x) and later you can print header with:
SELECT string_agg(COLUMN_NAME, ', ') within group (order by ORDINAL_POSITION asc) FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME='YOUR_TABLE_NAME'
1.Create the file first with the header columns
2.Apprend the sqlcmd output to the file using the option -h-1
echo acctnum,rptmonth,facilname > c:\dataExport.csv
sqlcmd -S . -d MyDb -E -s, -h-1 -W -Q "select account,rptmonth, thename from theTable" >> c:\dataExport.csv
I used another solution to solve the issue of removing the dashed line below the header.
DECLARE #combinedString VARCHAR(MAX);
SELECT #combinedString = COALESCE(#combinedString + '|', '') + COLUMN_NAME
FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'YOUR_TABLE_NAME'
Then just use
Print #combinedString above your select statement.
I used pipe delimiter.
I need to extract SQL files from multiple tables of a PostgreSQL database. This is what I've come up with so far:
pg_dump -t 'thr_*' -s dbName -U userName > /home/anik/psqlTest/db_dump.sql
However, as you see, all the tables that start with the prefix thr are being exported to a single unified file (db_dump.sql). I have almost 90 tables in total to extract SQL from, so it is a must that the data be stored into separate files.
How can I do it? Thanks in advance.
If you are happy to hard-code the list of tables, but just want each to be in a different file, you could use a shell script loop to run the pg_dump command multiple times, substituting in the table name each time round the loop:
for table in table1 table2 table3 etc;
do pg_dump -t $table -U userName dbName > /home/anik/psqlTest/db_dump_dir/$table.sql;
done;
EDIT: This approach can be extended to get the list of tables dynamically by running a query through psql and feeding the results into the loop instead of a hard-coded list:
for table in $(psql -U userName -d dbName -t -c "Select table_name From information_schema.tables Where table_type='BASE TABLE' and table_name like 'thr_%'");
do pg_dump -t $table -U userName dbName > /home/anik/psqlTest/db_dump_dir/$table.sql;
done;
Here psql -t -c "SQL" runs SQL and outputs the results with no header or footer; since there is only one column selected, there will be a table name on each line of the output captured by $(command), and your shell will loop through them one at a time.
Since version 9.1 of PostgreSQL (Sept. 2011), one can use the directory format output when doing backups
and 2 versions/2 years after (PostgreSQL 9.3), the --jobs/-j makes it even more efficient to backup every single objects in parallel
but what I don't understand in your original question, is that you use the -s option which dumps only the object definitions (schema), not data.
if you want the data, you shall not use -s but rather -a (data-only) or no option to have schema+data
so, to backup all objects (tables...) that begins with 'th' for the database dbName on the directory dbName_objects/ with 10 concurrent jobs/processes (increase load on the server) :
pg_dump -Fd -f dbName_objects -j 10 -t 'thr_*' -U userName dbName
(you can also use the -a/-s if you want the data or the schema of the objects)
as a result the directory will be populated with a toc.dat (table of content of all the objects) and one file per object (.dat.gz) in a compressed form
each file is named after it's object number, and you can retrieve the list with the following pg_restore command:
pg_restore --list -Fd dbName_objects/ | grep 'TABLE DATA'
in order to have each file not compressed (in raw SQL)
pg_dump --data-only --compress=0 --format=directory --file=dbName_objects --jobs=10 --table='thr_*' --username=userName --dbname=dbName
(not enough reputation to comment the right post)
I used your script with some corrections and some modifications for my own use, may be usefull for others:
#!/bin/bash
# Config:
DB=rezopilotdatabase
U=postgres
# tablename searchpattern, if you want all tables enter "":
P=""
# directory to dump files without trailing slash:
DIR=~/psql_db_dump_dir
mkdir -p $DIR
TABLES="$(psql -d $DB -U $U -t -c "SELECT table_name FROM
information_schema.tables WHERE table_type='BASE TABLE' AND table_name
LIKE '%$P%' ORDER BY table_name")"
for table in $TABLES; do
echo backup $table ...
pg_dump $DB -U $U -w -t $table > $DIR/$table.sql;
done;
echo done
(I think you forgot to add $DB in the pg_dumb command, and I added a -w, for an automated script, it is better not to have a psw prompt I guess, for that, I created a ~/.pgpass file with my password in it
I also gave the user for the command to know which password to fetch in .pgpass)
Hope this helps someone someday.
This bash script will do a backup with one file per table:
#!/bin/bash
# Config:
DB=dbName
U=userName
# tablename searchpattern, if you want all tables enter "":
P=""
# directory to dump files without trailing slash:
DIR=~/psql_db_dump_dir
mkdir -p $DIR
AUTH="-d $DB -U $U"
TABLES="$(psql $AUTH -t -c "SELECT table_name FROM information_schema.tables WHERE table_type='BASE TABLE' AND table_name LIKE '%$P%' ORDER BY table_name")"
for table in $TABLES; do
echo backup $table ...
pg_dump $AUTH -t $table > $DIR/$table.sql;
done;
echo done