Using tsql I want to count a numeric chars in string. For example i've got 'kick0my234ass' string and i wanna count how many (4 in that example) numbers are in that string. I can't use regex, just plain tslq.
You COULD do this I suppose:
declare #c varchar(30)
set #c = 'kick0my234ass'
select #c, len(replace(#c,' ','')) - len(replace(replace(replace(replace(replace(replace(replace(replace(replace(replace(replace(#c,'0',''),'1',''),'2',''),'3',''),'4',''),'5',''),'6',''),'7',''),'8',''),'9',''),' ',''))
You'll first have to split the character string in its individual characters, evaluate which are numeric, and finally count those that are. This will do the trick:
DECLARE #test TABLE (Example NVARCHAR(255))
INSERT #test
VALUES ('kick0my234ass')
SELECT COUNT(1)
FROM #test AS T
INNER JOIN master..spt_values v
ON v.type = 'P'
AND v.number < len(T.Example)
WHERE SUBSTRING(T.Example, v.number + 1, 1) LIKE '[0-9]'
You could try this solution with regular expressions (if you'd allow them):
it uses recursive CTE, at every recursive step, one digit is removed from given string and the condition is to stop, when there are no digits in string. The rows are also numbered with consecutive ids, so the last id is the amount of removed digits from string.
declare #str varchar(100) = 'kick0my123ass';
with cte as (
select 1 [id], stuff(#str,PATINDEX('%[0-9]%', #str),1,'') [col]
union all
select [id] + 1, stuff([col],PATINDEX('%[0-9]%', [col]),1,'') from cte
where col like '%[0-9]%'
)
--this will give you number of digits in string
select top 1 id from cte order by id desc
Use a WHILE loop to each each character is a numeric or not.
Query
declare #text as varchar(max) = 'kick0my234ass';
declare #len as int;
select #len = len(#text);
if(#len > 0)
begin
declare #i as int = 1;
declare #count as int = 0;
while(#i <= #len)
begin
if(substring(#text, #i, 1) like '[0-9]')
set #count += 1;
set #i += 1;
end
print 'Count of Numerics in ' + #text + ' : ' + cast(#count as varchar(100));
end
else
print 'Empty string';
If simplicity & performance are important I suggest a purely set-based solution. Grab a copy of DigitsOnlyEE which will remove all non-numeric characters. Then use LEN against the output.
DECLARE #string varchar(100) = '123xxx45ff678';
SELECT string = #string, digitsOnly, DigitCount = LEN(digitsOnly)
FROM dbo.DigitsOnlyEE(#string);
Results
string digitsOnly DigitCount
------------------ ----------- ------------
123xxx45ff678 12345678 8
using a Tally Table created by an rCTE:
CREATE TABLE #Sample (S varchar(100));
INSERT INTO #Sample
VALUES ('kick0my234 ass');
GO
WITH Tally AS(
SELECT 1 AS N
UNION ALL
SELECT N + 1
FROM Tally
WHERE N + 1 <= 100)
SELECT S.S, SUM(CASE WHEN SUBSTRING(S,T.N, 1) LIKE '[0-9]' THEN 1 ELSE 0 END) AS Numbers
FROM #Sample S
JOIN Tally T ON LEN(S.S) >= T.N
GROUP BY S.S;
For future reference, also post your owns attempts please. We aren't here (really) to do your work for you.
I've got MSSQL 2012 database with some data issues in the certain column A which contains text.
There are many occurences of aditional unnecesarry character after the </B> tag, for instance:
'<B>Something</B>g' where should stand '<B>Something</B>'
'<B>SomethingElse</B>e' where should stand '<B>SomethingElse</B>'
Previous values are part of a greater text, for instance and can occur more than once -> Column example:
'Some text is here <B>Something</B>g and also here <B>SomethingElse</B>e more text'
Those 'extra' characters are always the same as the last character between the <B></B> tags.
I would like to create SQL scripts which will:
Remove extra character after </B> tag
Only if extra character is the same as the last character between the
<B></B> tags (as a aditional check). EDIT: This is not absolutely necessary
I assuming there is a way of calling replace function, like in this pseudo in which X represents any character.
replace(X</B>X, X</B>);
But I am not very good in SQL and also I don't know how to implement 2. check.
Thank you for your help.
If your column has no other characters then just those strings, you could use this update statement on column a:
update mytable
set a = left(a, len(a)-1)
where left(right(a, 6), 5) = right(a, 1) + '</B>'
Here are some test cases in a fiddle.
To replace such occurrences in longer strings, where there might be multiple of them, then you can use this recursive query:
WITH recursive AS (
SELECT replace(a, '</B>', 'µ') as a
FROM mytable
UNION ALL
SELECT stuff(a, charindex('µ', a),
CASE WHEN substring(a, charindex('µ', a)-1, 1)
= substring(a, charindex('µ', a)+1, 1)
THEN 2
ELSE 1
END, '</B>')
FROM recursive
WHERE charindex('µ', a) > 0
)
SELECT *
FROM recursive
WHERE charindex('µ', a) = 0
The character µ that appears in several places should be a character that you do not expect to ever have in your data. Replace it by another character if necessary.
Here is a fiddle.
The above query turned into an update statement looks like below. It assumes that your table has a primary key id:
WITH recursive AS (
SELECT id,
replace(a, '</B>', 'µ') as a,
0 as modified
FROM mytable
UNION ALL
SELECT id,
stuff(a, charindex('µ', a),
CASE WHEN substring(a, charindex('µ', a)-1, 1)
= substring(a, charindex('µ', a)+1, 1)
THEN 2 ELSE 1 END, '</B>'),
1
FROM recursive
WHERE charindex('µ', a) > 0
)
UPDATE mytable
SET a = recursive.a
FROM recursive
INNER JOIN mytable
ON mytable.id = recursive.id
WHERE charindex('µ', recursive.a) = 0
AND recursive.modified = 1;
Here is the fiddle for that as well.
You can create a scalar function:
CREATE FUNCTION [dbo].[RemoveChars]
(
-- Add the parameters for the function here
#InputStr NVARCHAR(50)
)
RETURNS NVARCHAR(50)
AS
BEGIN
DECLARE #SearchStr NVARCHAR(4) = '</B>'
DECLARE #LastChar CHAR(1)
DECLARE #LastCharInStr CHAR(1)
DECLARE #Result NVARCHAR(50)
SET #LastChar = SUBSTRING(#InputStr,
CHARINDEX(#SearchStr, #InputStr) + LEN(#SearchStr), 1)
SET #LastCharInStr = SUBSTRING(#InputStr,
CHARINDEX(#SearchStr, #InputStr) - 1, 1)
IF (#LastCharInStr = #LastChar)
SET #Result = SUBSTRING(#InputStr, 0,
CHARINDEX(#SearchStr, #InputStr) + LEN(#SearchStr))
ELSE
SET #Result = #InputStr
RETURN #Result
END
And then call it:
UPDATE MyTable
Set A = dbo.RemoveChars(A)
Personally I would create a second function to only apply the updates to the values that have a difference between the last char in the string and the char after the but that's for you to decide.
Consider the following table:
MyValue
--------------------
123
122_DELETED
45670
42425
43_NO_VIEW
4365463_CORRUPT
53
4335_NO_VIEW_ALLOWED
I'm trying to get only the numbers returned. In other words: string everything after the first underscore (_):
select
left(MyValue, charindex(('_', MyValue)-1)
from
DB.Table
However, this returns the error Invalid length parameter passed to the LEFT or SUBSTRING function. I believe this is because the value is NULL in case the current value has no underscore (for instance, 123).
How can I account for this exception? Any help is greatly appreciated.
I am on SQL Server 2008.
try this!
select myval,case when myval like '%[_]%' then
substring(myval,1,patindex('%[_]%',myval)-1) else myval end from t
##DEMO USING PATINDEX
##DEMO USING CHARINDEX
select SUBSTRING(MyValue,CHARINDEX('_',MyValue)+1,LEN(MyValue)) from DB.Table
try this
select
case when MyValue is null then '' --if null return empty string
when charindex('_', MyValue) > 0 then
left(MyValue, charindex('_', MyValue)-1)
else
MyValue --Return the field value if an underscore is not present
end as Result
from
DB.Table
Try out this one:
declare #st varchar(20)
set #st ='4365463_CORRU'
select #st, SUBSTRING(#st,CHARINDEX('_',#st)-LEN(#st),LEN(#st))
Check this .
declare #t table (myvalue varchar(50))
insert into #t
values ( '123'),('122_DELETED'),('45670'),('42425'),('43_NO_VIEW'),('4365463_CORRUPT'),('53'),('4335_NO_VIEW_ALLOWED')
select * from #t
;With cte as
(
select CHARINDEX( '_', myvalue)+1 d , myvalue from #t
)
select SUBSTRING(myvalue,d,LEN(myvalue) ) from cte
I have data like this:
string 1: 003Preliminary Examination Plan
string 2: Coordination005
string 3: Balance1000sheet
The output I expect is
string 1: 003
string 2: 005
string 3: 1000
And I want to implement it in SQL.
First create this UDF
CREATE FUNCTION dbo.udf_GetNumeric
(
#strAlphaNumeric VARCHAR(256)
)
RETURNS VARCHAR(256)
AS
BEGIN
DECLARE #intAlpha INT
SET #intAlpha = PATINDEX('%[^0-9]%', #strAlphaNumeric)
BEGIN
WHILE #intAlpha > 0
BEGIN
SET #strAlphaNumeric = STUFF(#strAlphaNumeric, #intAlpha, 1, '' )
SET #intAlpha = PATINDEX('%[^0-9]%', #strAlphaNumeric )
END
END
RETURN ISNULL(#strAlphaNumeric,0)
END
GO
Now use the function as
SELECT dbo.udf_GetNumeric(column_name)
from table_name
SQL FIDDLE
I hope this solved your problem.
Reference
Try this one -
Query:
DECLARE #temp TABLE
(
string NVARCHAR(50)
)
INSERT INTO #temp (string)
VALUES
('003Preliminary Examination Plan'),
('Coordination005'),
('Balance1000sheet')
SELECT LEFT(subsrt, PATINDEX('%[^0-9]%', subsrt + 't') - 1)
FROM (
SELECT subsrt = SUBSTRING(string, pos, LEN(string))
FROM (
SELECT string, pos = PATINDEX('%[0-9]%', string)
FROM #temp
) d
) t
Output:
----------
003
005
1000
Query:
DECLARE #temp TABLE
(
string NVARCHAR(50)
)
INSERT INTO #temp (string)
VALUES
('003Preliminary Examination Plan'),
('Coordination005'),
('Balance1000sheet')
SELECT SUBSTRING(string, PATINDEX('%[0-9]%', string), PATINDEX('%[0-9][^0-9]%', string + 't') - PATINDEX('%[0-9]%',
string) + 1) AS Number
FROM #temp
Please try:
declare #var nvarchar(max)='Balance1000sheet'
SELECT LEFT(Val,PATINDEX('%[^0-9]%', Val+'a')-1) from(
SELECT SUBSTRING(#var, PATINDEX('%[0-9]%', #var), LEN(#var)) Val
)x
Getting only numbers from a string can be done in a one-liner.
Try this :
SUBSTRING('your-string-here', PATINDEX('%[0-9]%', 'your-string-here'), LEN('your-string-here'))
NB: Only works for the first int in the string, ex: abc123vfg34 returns 123.
I found this approach works about 3x faster than the top voted answer. Create the following function, dbo.GetNumbers:
CREATE FUNCTION dbo.GetNumbers(#String VARCHAR(8000))
RETURNS VARCHAR(8000)
AS
BEGIN;
WITH
Numbers
AS (
--Step 1.
--Get a column of numbers to represent
--every character position in the #String.
SELECT 1 AS Number
UNION ALL
SELECT Number + 1
FROM Numbers
WHERE Number < LEN(#String)
)
,Characters
AS (
SELECT Character
FROM Numbers
CROSS APPLY (
--Step 2.
--Use the column of numbers generated above
--to tell substring which character to extract.
SELECT SUBSTRING(#String, Number, 1) AS Character
) AS c
)
--Step 3.
--Pattern match to return only numbers from the CTE
--and use STRING_AGG to rebuild it into a single string.
SELECT #String = STRING_AGG(Character,'')
FROM Characters
WHERE Character LIKE '[0-9]'
--allows going past the default maximum of 100 loops in the CTE
OPTION (MAXRECURSION 8000)
RETURN #String
END
GO
Testing
Testing for purpose:
SELECT dbo.GetNumbers(InputString) AS Numbers
FROM ( VALUES
('003Preliminary Examination Plan') --output: 003
,('Coordination005') --output: 005
,('Balance1000sheet') --output: 1000
,('(111) 222-3333') --output: 1112223333
,('1.38hello#f00.b4r#\-6') --output: 1380046
) testData(InputString)
Testing for performance:
Start off setting up the test data...
--Add table to hold test data
CREATE TABLE dbo.NumTest (String VARCHAR(8000))
--Make an 8000 character string with mix of numbers and letters
DECLARE #Num VARCHAR(8000) = REPLICATE('12tf56se',800)
--Add this to the test table 500 times
DECLARE #n INT = 0
WHILE #n < 500
BEGIN
INSERT INTO dbo.NumTest VALUES (#Num)
SET #n = #n +1
END
Now testing the dbo.GetNumbers function:
SELECT dbo.GetNumbers(NumTest.String) AS Numbers
FROM dbo.NumTest -- Time to complete: 1 min 7s
Then testing the UDF from the top voted answer on the same data.
SELECT dbo.udf_GetNumeric(NumTest.String)
FROM dbo.NumTest -- Time to complete: 3 mins 12s
Inspiration for dbo.GetNumbers
Decimals
If you need it to handle decimals, you can use either of the following approaches, I found no noticeable performance differences between them.
change '[0-9]' to '[0-9.]'
change Character LIKE '[0-9]' to ISNUMERIC(Character) = 1 (SQL treats a single decimal point as "numeric")
Bonus
You can easily adapt this to differing requirements by swapping out WHERE Character LIKE '[0-9]' with the following options:
WHERE Letter LIKE '[a-zA-Z]' --Get only letters
WHERE Letter LIKE '[0-9a-zA-Z]' --Remove non-alphanumeric
WHERE Letter LIKE '[^0-9a-zA-Z]' --Get only non-alphanumeric
With the previous queries I get these results:
'AAAA1234BBBB3333' >>>> Output: 1234
'-çã+0!\aº1234' >>>> Output: 0
The code below returns All numeric chars:
1st output: 12343333
2nd output: 01234
declare #StringAlphaNum varchar(255)
declare #Character varchar
declare #SizeStringAlfaNumerica int
declare #CountCharacter int
set #StringAlphaNum = 'AAAA1234BBBB3333'
set #SizeStringAlfaNumerica = len(#StringAlphaNum)
set #CountCharacter = 1
while isnumeric(#StringAlphaNum) = 0
begin
while #CountCharacter < #SizeStringAlfaNumerica
begin
if substring(#StringAlphaNum,#CountCharacter,1) not like '[0-9]%'
begin
set #Character = substring(#StringAlphaNum,#CountCharacter,1)
set #StringAlphaNum = replace(#StringAlphaNum, #Character, '')
end
set #CountCharacter = #CountCharacter + 1
end
set #CountCharacter = 0
end
select #StringAlphaNum
declare #puvodni nvarchar(20)
set #puvodni = N'abc1d8e8ttr987avc'
WHILE PATINDEX('%[^0-9]%', #puvodni) > 0 SET #puvodni = REPLACE(#puvodni, SUBSTRING(#puvodni, PATINDEX('%[^0-9]%', #puvodni), 1), '' )
SELECT #puvodni
A solution for SQL Server 2017 and later, using TRANSLATE:
DECLARE #T table (string varchar(50) NOT NULL);
INSERT #T
(string)
VALUES
('003Preliminary Examination Plan'),
('Coordination005'),
('Balance1000sheet');
SELECT
result =
REPLACE(
TRANSLATE(
T.string COLLATE Latin1_General_CI_AI,
'abcdefghijklmnopqrstuvwxyz',
SPACE(26)),
SPACE(1),
SPACE(0))
FROM #T AS T;
Output:
result
003
005
1000
The code works by:
Replacing characters a-z (ignoring case & accents) with a space
Replacing spaces with an empty string.
The string supplied to TRANSLATE can be expanded to include additional characters.
I did not have rights to create functions but had text like
["blahblah012345679"]
And needed to extract the numbers out of the middle
Note this assumes the numbers are grouped together and not at the start and end of the string.
select substring(column_name,patindex('%[0-9]%', column_name),patindex('%[0-9][^0-9]%', column_name)-patindex('%[0-9]%', column_name)+1)
from table name
Although this is an old thread its the first in google search, I came up with a different answer than what came before. This will allow you to pass your criteria for what to keep within a string, whatever that criteria might be. You can put it in a function to call over and over again if you want.
declare #String VARCHAR(MAX) = '-123. a 456-78(90)'
declare #MatchExpression VARCHAR(255) = '%[0-9]%'
declare #return varchar(max)
WHILE PatIndex(#MatchExpression, #String) > 0
begin
set #return = CONCAT(#return, SUBSTRING(#string,patindex(#matchexpression, #string),1))
SET #String = Stuff(#String, PatIndex(#MatchExpression, #String), 1, '')
end
select (#return)
This UDF will work for all types of strings:
CREATE FUNCTION udf_getNumbersFromString (#string varchar(max))
RETURNS varchar(max)
AS
BEGIN
WHILE #String like '%[^0-9]%'
SET #String = REPLACE(#String, SUBSTRING(#String, PATINDEX('%[^0-9]%', #String), 1), '')
RETURN #String
END
Just a little modification to #Epsicron 's answer
SELECT SUBSTRING(string, PATINDEX('%[0-9]%', string), PATINDEX('%[0-9][^0-9]%', string + 't') - PATINDEX('%[0-9]%',
string) + 1) AS Number
FROM (values ('003Preliminary Examination Plan'),
('Coordination005'),
('Balance1000sheet')) as a(string)
no need for a temporary variable
Firstly find out the number's starting length then reverse the string to find out the first position again(which will give you end position of number from the end). Now if you deduct 1 from both number and deduct it from string whole length you'll get only number length. Now get the number using SUBSTRING
declare #fieldName nvarchar(100)='AAAA1221.121BBBB'
declare #lenSt int=(select PATINDEX('%[0-9]%', #fieldName)-1)
declare #lenEnd int=(select PATINDEX('%[0-9]%', REVERSE(#fieldName))-1)
select SUBSTRING(#fieldName, PATINDEX('%[0-9]%', #fieldName), (LEN(#fieldName) - #lenSt -#lenEnd))
T-SQL function to read all the integers from text and return the one at the indicated index, starting from left or right, also using a starting search term (optional):
create or alter function dbo.udf_number_from_text(
#text nvarchar(max),
#search_term nvarchar(1000) = N'',
#number_position tinyint = 1,
#rtl bit = 0
) returns int
as
begin
declare #result int = 0;
declare #search_term_index int = 0;
if #text is null or len(#text) = 0 goto exit_label;
set #text = trim(#text);
if len(#text) = len(#search_term) goto exit_label;
if len(#search_term) > 0
begin
set #search_term_index = charindex(#search_term, #text);
if #search_term_index = 0 goto exit_label;
end;
if #search_term_index > 0
if #rtl = 0
set #text = trim(right(#text, len(#text) - #search_term_index - len(#search_term) + 1));
else
set #text = trim(left(#text, #search_term_index - 1));
if len(#text) = 0 goto exit_label;
declare #patt_number nvarchar(10) = '%[0-9]%';
declare #patt_not_number nvarchar(10) = '%[^0-9]%';
declare #number_start int = 1;
declare #number_end int;
declare #found_numbers table (id int identity(1,1), val int);
while #number_start > 0
begin
set #number_start = patindex(#patt_number, #text);
if #number_start > 0
begin
if #number_start = len(#text)
begin
insert into #found_numbers(val)
select cast(substring(#text, #number_start, 1) as int);
break;
end;
else
begin
set #text = right(#text, len(#text) - #number_start + 1);
set #number_end = patindex(#patt_not_number, #text);
if #number_end = 0
begin
insert into #found_numbers(val)
select cast(#text as int);
break;
end;
else
begin
insert into #found_numbers(val)
select cast(left(#text, #number_end - 1) as int);
if #number_end = len(#text)
break;
else
begin
set #text = trim(right(#text, len(#text) - #number_end));
if len(#text) = 0 break;
end;
end;
end;
end;
end;
if #rtl = 0
select #result = coalesce(a.val, 0)
from (select row_number() over (order by m.id asc) as c_row, m.val
from #found_numbers as m) as a
where a.c_row = #number_position;
else
select #result = coalesce(a.val, 0)
from (select row_number() over (order by m.id desc) as c_row, m.val
from #found_numbers as m) as a
where a.c_row = #number_position;
exit_label:
return #result;
end;
Example:
select dbo.udf_number_from text(N'Text text 10 text, 25 term', N'term',2,1);
returns 10;
This is one of the simplest and easiest one. This will work on the entire String for multiple occurences as well.
CREATE FUNCTION dbo.fn_GetNumbers(#strInput NVARCHAR(500))
RETURNS NVARCHAR(500)
AS
BEGIN
DECLARE #strOut NVARCHAR(500) = '', #intCounter INT = 1
WHILE #intCounter <= LEN(#strInput)
BEGIN
SELECT #strOut = #strOut + CASE WHEN SUBSTRING(#strInput, #intCounter, 1) LIKE '[0-9]' THEN SUBSTRING(#strInput, #intCounter, 1) ELSE '' END
SET #intCounter = #intCounter + 1
END
RETURN #strOut
END
Following a solution using a single common table expression (CTE).
DECLARE #s AS TABLE (id int PRIMARY KEY, value nvarchar(max));
INSERT INTO #s
VALUES
(1, N'003Preliminary Examination Plan'),
(2, N'Coordination005'),
(3, N'Balance1000sheet');
SELECT * FROM #s ORDER BY id;
WITH t AS (
SELECT
id,
1 AS i,
SUBSTRING(value, 1, 1) AS c
FROM
#s
WHERE
LEN(value) > 0
UNION ALL
SELECT
t.id,
t.i + 1 AS i,
SUBSTRING(s.value, t.i + 1, 1) AS c
FROM
t
JOIN #s AS s ON t.id = s.id
WHERE
t.i < LEN(s.value)
)
SELECT
id,
STRING_AGG(c, N'') WITHIN GROUP (ORDER BY i ASC) AS value
FROM
t
WHERE
c LIKE '[0-9]'
GROUP BY
id
ORDER BY
id;
DECLARE #index NVARCHAR(20);
SET #index = 'abd565klaf12';
WHILE PATINDEX('%[0-9]%', #index) != 0
BEGIN
SET #index = REPLACE(#index, SUBSTRING(#index, PATINDEX('%[0-9]%', #index), 1), '');
END
SELECT #index;
One can replace [0-9] with [a-z] if numbers only are wanted with desired castings using the CAST function.
If we use the User Define Function, the query speed will be greatly reduced. This code extracts the number from the string....
SELECT
Reverse(substring(Reverse(rtrim(ltrim( substring([FieldName] , patindex('%[0-9]%', [FieldName] ) , len([FieldName]) )))) , patindex('%[0-9]%', Reverse(rtrim(ltrim( substring([FieldName] , patindex('%[0-9]%', [FieldName] ) , len([FieldName]) )))) ), len(Reverse(rtrim(ltrim( substring([FieldName] , patindex('%[0-9]%', [FieldName] ) , len([FieldName]) ))))) )) NumberValue
FROM dbo.TableName
CREATE OR REPLACE FUNCTION count_letters_and_numbers(input_string TEXT)
RETURNS TABLE (letters INT, numbers INT) AS $$
BEGIN
RETURN QUERY SELECT
sum(CASE WHEN input_string ~ '[A-Za-z]' THEN 1 ELSE 0 END) as letters,
sum(CASE WHEN input_string ~ '[0-9]' THEN 1 ELSE 0 END) as numbers
FROM unnest(string_to_array(input_string, '')) as input_string;
END;
$$ LANGUAGE plpgsql;
For the hell of it...
This solution is different to all earlier solutions, viz:
There is no need to create a function
There is no need to use pattern matching
There is no need for a temporary table
This solution uses a recursive common table expression (CTE)
But first - note the question does not specify where such strings are stored. In my solution below, I create a CTE as a quick and dirty way to put these strings into some kind of "source table".
Note also - this solution uses a recursive common table expression (CTE) - so don't get confused by the usage of two CTEs here. The first is simply to make the data avaliable to the solution - but it is only the second CTE that is required in order to solve this problem. You can adapt the code to make this second CTE query your existing table, view, etc.
Lastly - my coding is verbose, trying to use column and CTE names that explain what is going on and you might be able to simplify this solution a little. I've added in a few pseudo phone numbers with some (expected and atypical, as the case may be) formatting for the fun of it.
with SOURCE_TABLE as (
select '003Preliminary Examination Plan' as numberString
union all select 'Coordination005' as numberString
union all select 'Balance1000sheet' as numberString
union all select '1300 456 678' as numberString
union all select '(012) 995 8322 ' as numberString
union all select '073263 6122,' as numberString
),
FIRST_CHAR_PROCESSED as (
select
len(numberString) as currentStringLength,
isNull(cast(try_cast(replace(left(numberString, 1),' ','z') as tinyint) as nvarchar),'') as firstCharAsNumeric,
cast(isNull(cast(try_cast(nullIf(left(numberString, 1),'') as tinyint) as nvarchar),'') as nvarchar(4000)) as newString,
cast(substring(numberString,2,len(numberString)) as nvarchar) as remainingString
from SOURCE_TABLE
union all
select
len(remainingString) as currentStringLength,
cast(try_cast(replace(left(remainingString, 1),' ','z') as tinyint) as nvarchar) as firstCharAsNumeric,
cast(isNull(newString,'') as nvarchar(3999)) + isNull(cast(try_cast(nullIf(left(remainingString, 1),'') as tinyint) as nvarchar(1)),'') as newString,
substring(remainingString,2,len(remainingString)) as remainingString
from FIRST_CHAR_PROCESSED fcp2
where fcp2.currentStringLength > 1
)
select
newString
,* -- comment this out when required
from FIRST_CHAR_PROCESSED
where currentStringLength = 1
So what's going on here?
Basically in our CTE we are selecting the first character and using try_cast (see docs) to cast it to a tinyint (which is a large enough data type for a single-digit numeral). Note that the type-casting rules in SQL Server say that an empty string (or a space, for that matter) will resolve to zero, so the nullif is added to force spaces and empty strings to resolve to null (see discussion) (otherwise our result would include a zero character any time a space is encountered in the source data).
The CTE also returns everything after the first character - and that becomes the input to our recursive call on the CTE; in other words: now let's process the next character.
Lastly, the field newString in the CTE is generated (in the second SELECT) via concatenation. With recursive CTEs the data type must match between the two SELECT statements for any given column - including the column size. Because we know we are adding (at most) a single character, we are casting that character to nvarchar(1) and we are casting the newString (so far) as nvarchar(3999). Concatenated, the result will be nvarchar(4000) - which matches the type casting we carry out in the first SELECT.
If you run this query and exclude the WHERE clause, you'll get a sense of what's going on - but the rows may be in a strange order. (You won't necessarily see all rows relating to a single input value grouped together - but you should still be able to follow).
Hope it's an interesting option that may help a few people wanting a strictly expression-based solution.
In Oracle
You can get what you want using this:
SUBSTR('ABCD1234EFGH',REGEXP_INSTR ('ABCD1234EFGH', '[[:digit:]]'),REGEXP_COUNT ('ABCD1234EFGH', '[[:digit:]]'))
Sample Query:
SELECT SUBSTR('003Preliminary Examination Plan ',REGEXP_INSTR ('003Preliminary Examination Plan ', '[[:digit:]]'),REGEXP_COUNT ('003Preliminary Examination Plan ', '[[:digit:]]')) SAMPLE1,
SUBSTR('Coordination005',REGEXP_INSTR ('Coordination005', '[[:digit:]]'),REGEXP_COUNT ('Coordination005', '[[:digit:]]')) SAMPLE2,
SUBSTR('Balance1000sheet',REGEXP_INSTR ('Balance1000sheet', '[[:digit:]]'),REGEXP_COUNT ('Balance1000sheet', '[[:digit:]]')) SAMPLE3 FROM DUAL
If you are using Postgres and you have data like '2000 - some sample text' then try substring and position combination, otherwise if in your scenario there is no delimiter, you need to write regex:
SUBSTRING(Column_name from 0 for POSITION('-' in column_name) - 1) as
number_column_name
Can somebody help me with this little task? What I need is a stored procedure that can find duplicate letters (in a row) in a string from a table "a" and after that make a new table "b" with just the id of the string that has a duplicate letter.
Something like this:
Table A
ID Name
1 Matt
2 Daave
3 Toom
4 Mike
5 Eddie
And from that table I can see that Daave, Toom, Eddie have duplicate letters in a row and I would like to make a new table and list their ID's only. Something like:
Table B
ID
2
3
5
Only 2,3,5 because that is the ID of the string that has duplicate letters in their names.
I hope this is understandable and would be very grateful for any help.
In your answer with stored procedure, you have 2 mistakes, one is missing space between column name and LIKE clause, second is missing single quotes around search parameter.
I first create user-defined scalar function which return 1 if string contains duplicate letters:
EDITED
CREATE FUNCTION FindDuplicateLetters
(
#String NVARCHAR(50)
)
RETURNS BIT
AS
BEGIN
DECLARE #Result BIT = 0
DECLARE #Counter INT = 1
WHILE (#Counter <= LEN(#String) - 1)
BEGIN
IF(ASCII((SELECT SUBSTRING(#String, #Counter, 1))) = ASCII((SELECT SUBSTRING(#String, #Counter + 1, 1))))
BEGIN
SET #Result = 1
BREAK
END
SET #Counter = #Counter + 1
END
RETURN #Result
END
GO
After function was created, just call it from simple SELECT query like following:
SELECT
*
FROM
(SELECT
*,
dbo.FindDuplicateLetters(ColumnName) AS Duplicates
FROM TableName) AS a
WHERE a.Duplicates = 1
With this combination, you will get just rows that has duplicate letters.
In any version of SQL, you can do this with a brute force approach:
select *
from t
where t.name like '%aa%' or
t.name like '%bb%' or
. . .
t.name like '%zz%'
If you have a case sensitive collation, then use:
where lower(t.name) like '%aa%' or
. . .
Here's one way.
First create a table of numbers
CREATE TABLE dbo.Numbers
(
number INT PRIMARY KEY
);
INSERT INTO dbo.Numbers
SELECT number
FROM master..spt_values
WHERE type = 'P'
AND number > 0;
Then with that in place you can use
SELECT *
FROM TableA
WHERE EXISTS (SELECT *
FROM dbo.Numbers
WHERE number < LEN(Name)
AND SUBSTRING(Name, number, 1) = SUBSTRING(Name, number + 1, 1))
Though this is an old post it's worth posting a solution that will be faster than a brute force approach or one that uses a scalar udf (which generally drag down performance). Using NGrams8K this is rather simple.
--sample data
declare #table table (id int identity primary key, [name] varchar(20));
insert #table([name]) values ('Mattaa'),('Daave'),('Toom'),('Mike'),('Eddie');
-- solution #1
select id
from #table
cross apply dbo.NGrams8k([name],1)
where charindex(replicate(token,2), [name]) > 0
group by id;
-- solution #2 (SQL 2012+ solution using LAG)
select id
from
(
select id, token, prevToken = lag(token,1) over (partition by id order by position)
from #table
cross apply dbo.NGrams8k([name],1)
) prep
where token = prevToken
group by id; -- optional id you want to remove possible duplicates.
another burte force way:
select *
from t
where t.name ~ '(.)\1';