I'm setting up a new server 2012 R2, and want to be connected to it remotely using an IP address or a domain name.
Read your modem's/gateway's manual and learn how to forward ports
Forward ports 8069 and 8072 to your windows server
Visit https://www.whatismyip.com/ or any other service that tells you your public IP address
Open your browser and go to http://<your_public_IP_address>:8069
Related
I have a java program that uses SQL queries. The goal is to send them from my home PC to a workstation on a different network elsewhere.
The SQL server is on Windows Server and I opened port 1433 for inbound connections. From that computer, I can successfully ping the port. However, I can't ping the port from the public ip address, only the local (192.168...), so it doesn't work if I were to try to ping it from my home computer.
Is there a way that I can ping it from my home computer? If so, how would I specify the address for JDBC?
Thanks!
It sounds like your Windows Server is behind an internet gateway/router. You need to configure the gateway to allow and forward inbound connections to TCP port 1433 to the IP of the computer that has SQL Server installed.
Here are some guides that explain how to enable port forwarding on different devices:
How to Forward Ports on Your Router (lifewire.com)
How to Port Forward (No-IP.com)
Also, note that we can ping IP addresses, not ports.
Hello i have an old windows xp pc im trying to turn into a server for hobbyist purposes. I downloaded and installed the apache xampp 1.8 distribution. Once installed and tested that the localhost worked, I connected my domain to my servers ip. So my problem is when i tried to connect to my site on my pc on the same network, they all were able to load the domain/site inside the network successfully but when i have a pc thats outside the network try it fails. Any ideas?. thanks.
You have used a private IP instead of public IP so it does not get resolved to your server. You have to use a public IP (if you have a static IP from your provider you have to setup port forwarding on your router.) If you get the IP from DHCPD server you will need to use dynamic DNS and port forwarding.
More info on private networks: http://en.wikipedia.org/wiki/Private_network
i have an ibm server, a tp-link router with an static ip and DHCP activated, i want to configure one of the net boards in the ibm server.
I installed Ububntu server and access to the net board configuration using this command:
vi /etc/network/interfaces
I configure the server with this
address -> i put an ip that i resrve in the router
netmask
network
broadcast
gateway
I have a subdomain from no ip i have entered in the server so i can do remote connection to the server throw this subdomain and ssh. I have put the subdomain in /etc/host.conf
The thing is i have access to the subdomain in the web and out of the LAN net. But when i try to connect to the server throw ssh it's gave me connection refused.
EDIT:
Using the command arp-scan -I eth0 -l i found that the IP of the server is asigned two times it's look like it's the same ethernet board with two MAC address thar are the same except the las number.
Ok, what's work for me was to reinstall openssh on the server and in my computer. After that I have access throw ssh.
First of all, i configured port 80 in my modem router which is 192.168.1.1 and in windows firewall, but although when i check it in websites that does my port 80 open or not?
I get this result: it is closed, how to solved it, call internet provider or what? does it have any other solution that u can help me
Please Help
Regards
if your web server is installed/setup behind a router(local) you need to configure your router for port forwarding pointing to your server ip and port.. you can also enable DMZ and set to point to your server local ip address.
http://lifehacker.com/127276/geek-to-live--how-to-access-a-home-server-behind-a-routerfirewall
When I host a page in /var/www/page, I can view it via:
localhost/page
192.xxx.x.xxx/page
Recently, I have started playing with websockets (using this repository).
When I activate the server, I can connect using localhost/page but not with 192.xxx.x.xxx/page (note that I can access the page but not connect to the server)
Can someone explain why?
"On most computer systems, localhost resolves to the address 127.0.0.1, which is the most-commonly used IPv4 loopback address..." (https://en.wikipedia.org/wiki/Localhost)
It's likely that the "localhost" host name is being resolved to the loopback interface IP address (127.0.0.1), as that is the standard on most machines.
If you want the server to respond to another IP address, you'll have to configure it.