I am integrating ccavenue payment gateway and downloaded nodejs environment ,when i run it and open datafrom.html and do checkout i am getting error code 115
You have to contact the CCAvenue support(Call: 02267425555. Dial 0 for operator. Ask for "Technical Support" section) for this.
I had this issue and I was trying to do the payment integration on my custom application. The problem was that I was redirecting to the test server of CCAvenue (sandbox mode). And they haven't configured their server to accept my test transactions.
So at first there was "10002 Authentication Failed" error. Because the url(test url in my server) from which I was initiated the transaction, was not whitelisted in the CCAvenue server. So, like in my case, if you have two different urls (or two domains/subdomains), one for the testing and the other as production, then you would have to send the mail to them requesting to whitelist your test url.
And you would be asked to send an email for this purpose, to this email id: service#ccavenue.com
For each URL you have (test and production), they will generate different set of access_code and working_key values. Make sure you login to your Merchant Dashboard and visit Settings menu --> API Keys for these values.
Related
I'm developing an app based on the Docusign C# Quickstart.
Its working fine on my development PC (Win 11) in Visual Studio 2019 using IIS Express.
However, when I publish it to IIS (v10) on my development PC it runs and I can authenticate with Docusign just fine (once I got the proper redirect URI registered: https://localhost/ds/callback) but the step that actually sends the envelope is returning the following error in the browser:
This page isn't working right now.
Local host can't handle this request
http error 500
Any help is appreciated. I logged a support ticket with Docusign, but still waiting for a response.
Quickstart is just an app to show you how to use DocuSign APIs.
The redirect after signing is back to localhost, and your app, once ready to be deployed to server, has to be set with a proper URL, at which point you'll need to update the redirect URI to the one based on your server.
The 500 error is coming from your app, not from DocuSign. You need to figure out why your app cannot handle the URL that is set for redirect after signing by DocuSign.
The base API address demo.docusign.net/restapi is used to reach the development/ test platform. The na4.docusign.net/restapi address is one of DocuSign's (many) production platforms.
Remember that, once you have passed the Go-Live process, you have two Client IDs (integration keys) one for the test platform, one for all of the production platforms. Each has its own settings.
Added
The error
This page isn't working right now.
Local host can't handle this request http error 500
Is from IIS. Use IIS logging to see the URL request that is coming in that can't be handled.
To see if it is the redirect from the initial OAuth Authorization Code grant URL, examine the initial URL redirect to account.docusign.com (prod URL).
The redirect contained as a query parameter in the initial OAuth redirect must:
Be correct for your instance of IIS.
Be allowed by your setting for the client ID (integration key) in DocuSign
1, Be properly handled by your IIS and its app.
We have 2 domain in salesforce:
1-) https://gablesinsurancerecovery.my.salesforce.com
2-) https://gableinsurancerecovery.force.com
and we have 2 user:
developer#cloudspade.com
communitytest#cloudspade.com
developer#cloudspade.com mail work with success on 1. domain but not work on 2. domain.
Likewise, communitytest#cloudspade.com mail work with success on 2. domain but not work on 1.domain.
Its not a problem. Problem is:
2.domain is important to us. Because we have a react-native project by forcereact and we want work with community domain. ( 2. domain ). We setup with successfully this link: https://www.youtube.com/watch?v=9zxMUrayFZ8&t=1634s
We was work with perfectly with the video in the link for login.salesforce.com or 1. domain but doesn't work for 2. domain.
Error is:
error image
As seen in the photo we was see a page. But our expectation was that it would working we send redirect_uri. The redirect_uri we sent was to return "girApp://success" with an access_token and instance_url at the end. But we encounter a screen as you can see in the photo. Redirect is not working. Our goal is to access the access_token with redirection within the application after login and authorize.
Lots to unpack here.
***.my.salesforce.com is your main domain, for internal users. ***.force.com is for Customer/Partner Experience Cloud (formerly known as Communities, formerly known as Portal).
developer#cloudspade.com mail work with success on 1. domain but not
work on 2. domain
Out of the box Salesforce is perfectly fine with internal users logging in to community or even 1-click switching over from internal SF to community. Collaboration and all that. Your administrator probably marked only certain profiles / permission sets as community members, you'd need to check config. But it's possible to use the community login page, you guys just chose not to.
communitytest#cloudspade.com mail work with success on 2. domain but
not work on 1.domain
Yes. Community members must use community login page. They can't use generic login.salesforce.com, test.salesforce.com or your branded ***.my.salesforce.com
works perfectly with (...) login.salesforce.com or 1. domain but
doesn't work for 2. domain
That's because most of the time the community login url must be full. Just the domain might not be enough for login because you can have up to 100 communities under same domain. You probably saw the example when you were enabling communities (Setup -> Digital Experiences -> Settings)
Go to Setup -> Digital Experiences -> All sites and write down the url you'll see there. It'll probably be something like ***.force.com/myportal. That means that for API login you might have more luck with ***.force.com/myportal than ***.force.com.
Stop reading this answer now and go read Sitecore - How to get User ID if the user was logged in using external identity provider (Salesforce SSO). Play with that OpenId Heroku app, once you get this to work with community user in the browser - you'll know which url to put in your react app. React developer might "like" this link too: https://gablesinsurancerecovery.force.com/.well-known/openid-configuration
It's kind of written in this article's footer: https://help.salesforce.com/s/articleView?id=sf.remoteaccess_oauth_endpoints.htm&type=5
Instead of using login.salesforce.com, you can also use the My Domain,
Experience Cloud site, or test.salesforce.com (sandbox) domain in
these endpoints. For hostname, use the My Domain, Experience Cloud
site, or custom URL
I have been trying to resolve this for some time now. I tried googling for this problem but didn't manage to find anything. All the questions I found were about replaying already recorded HTTPS requests.
So, I need to record HTTPS requests on a site protected with simple authentication (the pop-up window asking for username and password).
And this is where I get stuck. I enter correct login details and confirm it, nothing happens and in a second i get prompted to enter login details again, no error message nothing. When I press ESC I get 401 UNAUTHORIZED error.
Basically the site is acting as if the login details were incorrect when in fact I tried the same login details without Jmeter's proxy and the server accepted it.
What I tried:
1) Logging into this site without JMeter's proxy - works without problem
2) Recording different HTTPS site with JMeter's proxy - I tried my email and that works correctly as well
I should also mention that I am behind a company proxy, but I tried it at home and the result was same.
As for JMeter configuration, I am using everything on default having:
Thread Group
HTTP Cache Manager
HTTP Cookie Manager
HTTP Request Defaults
Recording Controller
HTTP(S) Test Script Recorder
Guessing the Thread Group doesn't really matter since I don't run any tests, only recording.
Additional Details:
Server:IIS
Logging into sharepoint website
EDIT:
Forgot to mention I tried already Blazemeter Extension, but when i try to record the logging session, it just freezes. Website hangs on trying to contact Blazemeter Cloud and Blazemeter plugin freezes, making it imposssible to stop recording and having to restart whole browser.
Also just noticed that when I am already logged in and try to access the site it records it without any issue. So it's only the login which is problematic for some reason.
JMeter removes cookies and authorization headers while recording.
You can use JMeter Chrome Extension as an alternate way of recording your test scenario.
In order to properly replay the recorded script you'll need to add HTTP Authorization Manager to it .
Sharepoint can have different authentication types, i.e.
Basic HTTP Authentication
Windows Integrated Authentication (NTLM)
Kerberos
See Windows Authentication with Apache JMeter guide to learn how to bypass each authentication challenge in your JMeter test.
So I was able to finally resolve this. The issue lied in sharepoint authentication. I was logged in a domain with my personal account, but was trying to access the sharepoint using a different account.
Sharepoint ignored the login details I was prompted to enter and used mw domain credentials instead. So the answer for me was to access the sharepoint website while being logged into domain(windows) with the same account.
I want to know how to use photobucket api. I successfully created a login in photobucket.
I am following the guidelines given http://api-portal.anypoint.mulesoft.com/photobucket/api/photobucket-api/docs/getting-started
The first step i am failing is that http://developer.photobucket.com is redirecting to different page.
As it is written
Go to the Photobucket developer web site at developer.photobucket.com, agree to the terms of service, sign up, and get the API key.
I am not able to open developer.photobucket.com.
I also see a redirect from developer.photobucket.com to photobucket.com. It seems that they incorrectly configured the redirect. The information about using Photobucket API required link was found in the support section:
Our engineers are working on a new API, with lots of changes, however,
this won't be available to users for a couple more months. Here is the
documentation on the current API.
If you'd rather not wait for this updated API, and would like the
current iteration now, please send an email to our API request email
address with the following information:
Your Photobucket username (This is the username for the account that
you have already created on Photobucket): Your application name
(whatever you would like): Do you require the key for commercial or
non-commercial purposes:
All three of these answers are required!
Send the API request to: pbdl-api#photobucket.com
The subject for the email should be: API Request
I know this question has been asked a thousand times before and I came across some topics here when doing some Google research about this.
My problem is: I get an Error 10002 - "Security header invalid". I checked the credentials and they are right. I use the live credentials for the live mode and am connecting to the right server and endpoint.
I am using a Paypal class written in PHP. When using it in Sandbox mode it works fine. If I am using it in live mode it shows the checkout as we know it: on the left the item and the total sum and on the right the login screen.
Now I log in with my Paypal account credentials and the API asks me to confirm the purchase. I do so. When it is at the point where it would execute the transaction and redirects to the "Purchase successful" page it suddenly says the above mentioned error.
So I did some testing on my machine with the sandbox account. Assuming that I would use invalid API credentials I would not ever see the checkout (on the left summary on the right login form). But I do. First if I confirm the transaction the API is not okay with the credentials anymore.
How can the credentials first be valid and later on they are invalid? This doesn't make any sense to me. When testing in Sandbox mode everything works fine.
I am using this library:
http://www.php-suit.com/paypal
Help would be highly appreciated as I can't find any explaination for that behaviour anymore. Again: I checked the credentials and they are right.
Best regards,
extrawagant
I'd recommend to double check again the API credentials or the endpoint used.
The error "Error 10002 - Security header invalid" is returned for these common reasons:
Providing the username/password to your actual PayPal account, instead of your API username and API password. We generate your API username and password when you generate your API certificate/signature.
Using the same API information for Sandbox and Live. You need to generate separate API information for your Sandbox and Live accounts.
You have not updated the endpoint to point to PayPal's live API servers.
Trailing or leading white space on any of the characters.
E.g. if you are using the Live Environment endpoint, make sure you are using the credentials created in the Live account. Double check for white spaces when you are pasting into your integration. If you are using the variable "SUBJECT" double check the value inserted.