I tried installing my npm in my text editor terminal, after running npx create-react-app react app, I figured the react app only has package.json, no node_modules, public, src, .gitignore, README.md, yarn.lock. My question is, if I continue using node.js, will this affect me down the line? If yes, how can I get those other packages installed in my npm? Please help
Thanks
I'm trying to learn cypress, but I haven't been able to get past installation. I follow the documentation, I run npm init and then npm install cypress --save-dev.
Next I tried running npx cypress open and adding to the package.json "cypress:open" : "cypress open and then running npm run cypress:open. In both cases, the launchpad opens for a few seconds and then closes immediately. I understand that it should create a cypress folder in my directory but it doesn't do anything, just closes. There is no error message or anything similar.
I don't know what to do and I can't find any information regarding this error, please help
Console when running commands
I solve it by downgrading Cypress to version 10.0.3
I am using react native and Expo. I am unable to build new app because after I use expo init appName it shows the following error.
Heres the full message:
📦 Using npm to install packages. You can pass --yarn to use Yarn instead.
√ Downloaded and extracted project files.
× Something when wrong installing JavaScript dependencies. Check your npm logs. Continuing to initialize the app.
✅ Your project is ready!
To run your project, navigate to the directory and run one of the following npm commands.
- cd Scanner
- npm start # you can open iOS, Android, or web from here, or run them directly with the commands below.
- npm run android
- npm run ios # requires an iOS device or macOS for access to an iOS simulator
- npm run web
I tried multiple times to create a blank project, also tried npm install to install failed/not downloaded libraries and continue after failure but it showed another error:
npm ERR! code Z_BUF_ERROR
npm ERR! errno -5
npm ERR! zlib: unexpected end of file
also tried npm cache verify that showed cache is ok Content verified: 3562 (252580364 bytes).
So, How can I solve this issue?
Problems related to npm installation are very common If you do any mistake in early installation, but is avoided. Learn more about npm tree.
Steps worked for me are :
npm cache clean --force
npm cache verify
npm -g uninstall expo-cli --save
npm install expo-cli --global
expo init app-name
cd app-name
npm start
Always run as administrator if working on Windows and in root directory.
The solutions above didn't work for me but if you use 'npm install' in the directory of the app you get a clue that you shuold try 'npm install --force'
err message
You should have all these files folders and files at the start of the project otherwise not all the dependencies have been installed which is why we were getting the problem.folder structure
After you have added --force to npm install you have all the dependencies installed. Now you can run the app with npm start.
Unfortunately, all the solutions described above didn't work on my machine...
Here is my latest solution for this problem...
This worked 100% on my machine...
Use npm i -g expo-cli
This will automatically add the required packages and also remove the unnecessary ones.
Yes, surely, you don't need to uninstall and re-install it again.
Just follow my steps.
And, you can create your expo project using expo init.
I hope my solution will help you out from this annoying problem....
I just did npm install and it worked for me, but I had do that every time I create a new expo project.
I also encountered this problem, and finally found that it was the problem of react native cli，I installed the latest version of react native cli，Expo is back to normal
This Error is regarding to the git account. expos need a git account to setup react native project
If you are using windows you need to install git in your local PC
after that open your Terminal and type this command
git config --global user.name "your_username"
git config --global user.email "your_email_address#example.com"
after that clone any github project to your local computer. it will ask to login to Github
after all these steps try expo init <projectname>
The simple way to settle that error is by using "expo-cli init app-name" instead of "expo init app-name".
I tried and worked perfectly for me. Hope it will help you guys.
i have faced a similar problem and running yarn set version 1.22.1 fix it
Run the Command Prompt as an administrator. And run the following command:
npx create-expo-app AwesomeProject
Every time I try to react-native link a new library, I get the same error message. Here it is for react-native-video.
rnpm-install info Linking react-native-video android dependency
rnpm-install ERR! Something went wrong while linking. Error: ENOENT: no such file or directory, open '/Users/Me/Projects/myProject/android/app/src/main/java/com/companyName/appName/MainApplication.java'
Please file an issue here: https://github.com/facebook/react-native/issues
The actual location of my MainApplication.java file is
./android/app/src/main/java/com/appName/MainApplication.java
The difference is that React Native Link is including "company name" in the path, which doesn't match my project.
How can I fix this?
I looked over some topic and found solution, you can try with:
npm install --save-dev babel-plugin-module-resolver
and then add your npm install package & react-native link again.
Good luck
I'm pretty late to the party on this, but for future reference;
TLDR: Adding another folder like so java/com/companyName/AppName/ will fix your issue.
After updating to the latest react-native I had this issue too. Your android path contains your apps ID so com.test.app path should be android/app/src/main/java/com/test/app.
Looking at your error message, its actually telling you where it's expecting the file to be;
Error: ENOENT: no such file or directory, open '/Users/Me/Projects/myProject/android/app/src/main/java/com/companyName/appName/MainApplication.java'
If you create another folder like so java/com/companyName/AppName/ you will be able to automatically link plugins.
Another way I tried and it works for me:
rm -rf node_modules && npm install
Then retry install your package:
ex:
npm install react-native-image-picker#latest --save
Then react-native link your package
react-native link react-native-image-picker
There are only two options that i am aware of to solve this problem
close all the terminals to stop the node server running on a difference terminal.
If you still have the mistake after that then try the following option
You might still have the error because you uninstall and re-install react-native without paying attention to the version that you installed which for most case will be the latest version. So double check the current version of your react-native when installing it. "\n"
so either
in your package.json you add "react-native": "^0.60.5" if the version is 0.60.5 replace "^0.60.5" by the version you are trying to run, in devDepencies and run npm install
or
run npm install react-native#0.60.5 or npm install react-native#version
I recently started with react-native. I install it using the tutorial on the Facebook site and everything works well for a day or two until this message comes up:
'react-native' is not recognized as an internal or external command,
operable program or batch file.
Nothing works except uninstalling everything and starting all over again. The environments are ok and work (npm, choco, etc.). I have also tried removing and adding react-native to environment variables, restarting, and running cmd in administrator mode, but nothing so far. I should add that I use windows 10 64-bit.
I had the same issue and tried the following but didnt work
Adding npm path to my Environment variables; both system and user
Re install npm and react-native-cli
Both didn't work for me, im using Windows 10;
Solution that worked for me is to install react-native-cli globally
You can install it globally by using the below command:
npm install -g react-native-cli
You can simply use npx react-native <command> it will work
npm install -g react-native-cli
But dont forget to restart command promprt
Your system or user environment PATH variable was edited, you can uninstall NodeJs and install it again or add the below path to the end of PATH variable into user variables the restart the Windows :
C:\Users\[USER-NAME]\AppData\Roaming\npm
this should work.
You need to setup the npm path in your environment variables. Please look at the images down below
Then follow the command : for installing -g ( global ) for cli in your system
npm install -g react-native-cli
I get the same error right off the bat on Windows 10 running in cmd window in adminstrator mode, however there is also a bash shell version of react-native that worked for me in a git bash window.
cmd:----------------------------------------------
C:\Users\David\Documents\react>where react-native
C:\Users\David\AppData\Roaming\npm\react-native
C:\Users\David\AppData\Roaming\npm\react-native.cmd
C:\Users\David\Documents\react>react-native init AwesomeProject
'react-native' is not recognized as an internal or external command,
operable program or batch file.
git bash:----------------------------------------
David#CYBER-PC ~/Documents/react
$ react-native init AwesomeProject
This will walk you through creating a new React Native project in c:\Users\David\Documents\react\AwesomeProject
Installing react-native package from npm...
Setting up new React Native app in c:\Users\David\Documents\react\AwesomeProject
AwesomeProject#0.0.1 c:\Users\David\Documents\react\AwesomeProject`-- react#15.3.1
To run your app on iOS:
cd c:\Users\David\Documents\react\AwesomeProject
react-native run-ios
- or -
Open c:\Users\David\Documents\react\AwesomeProject\ios\AwesomeProject.xcodeproj in Xcode
Hit the Run button
To run your app on Android:
Have an Android emulator running (quickest way to get started), or a device connected
cd c:\Users\David\Documents\react\AwesomeProject
react-native run-android
npm install -g react-native-cli
I had to add the %APPDATA%\npm folder to my PATH on Windows 10. Global modules are installed there.
If uninstalling and installing again the npm did not work on you, try adding %APPDATA%\npm to path (Environment variables) then quick reboot/restart. System Reboot should really be part of the process. This worked on my end.
Install :
npm install -g react-native-cli
Uninstall :
npm uninstall -g react-native-cli
If you are following the getting started guide for Windows/Android, they recommend installing nodejs via Chocolatey. But Chocolatey likes to have administrator rights when it installs things. If you're just a regular user, this seems to interfere with how npm installs react-native-cli. In my case, the react-native command was only recognized when I launched a command prompt as admin.
What I did to fix:
launched command prompt as admin
uninstalled react-native-cli globally: npm uninstall -g react-native-cli
uninstalled nodejs via Chocolatey: choco uninstall nodejs
Now, as a regular user without admin rights:
installed nodejs via the nodejs website (not Chocolatey)
installed react-native-cli globally: npm install -g react-native-cli
I uninstalled node.js and then reinstalled it, and it worked like a charm
just uninstall the node.js and reinstall it..
then install the cli package typing command
npm install -g react-native-cli..
now you are ready to make your project.
To make project open a folder from your drive wherever your folder is located.
Then type command
react-native init albums
it will create a project for you inside your directory.
None of the above mentioned solutions worked for me. What did work was to remove nodejs, and reinstall it via Chocolatey with the following command:
PS > choco install -y nodejs.install python2 jdk8
> npm install -g react-native-cli
C:\Users\user\AppData\Roaming\npm\react-native ->
C:\Users\user\AppData\Roaming\npm\node_modules\react-native-cli\index.js
+ react-native-cli#2.0.1
added 41 packages from 15 contributors in 4.528s
I had this problem also becuase I restored my files from a previous OS installation. My problem was a wrong prefix in my C:\Users\user_name\.npmrc file.
Run npm config list and make sure that all your npm config variables are leading to the correct file paths. Delete the .npmrc file if you want have it to go back to the defaults. That's what I did and react-native command is working for me again.
I hope this helps.
i have no clear idea but below steps worked for me.
delete Node Modules
Uninstall react-native cli. This is Recommended in the react-native Documentation
"If you previously installed a global react-native-cli package, please remove it as it may cause unexpected issues."
npm uninstall -g react-native-cli
clean gradlew. in your project folder, go to the android folder by typing cd android
and run gradlew clean
move back to your project folder cd .., then run
npx react-native run-android
these steps worked for me. took some time when running first time.
use node.js stable version or recommended version.
On window 10, nodejs>11 global node libraries seems to be installed in C:\Users\your_user_name.npm-global. So you need to set the variable to point to that path
I had problems because of this strange mistake.
I checked to see if it was globally loaded again
I didn't delete all packages
I even deleted C:\Users[USER-NAME]\AppData\Roaming\ npm manually, but there was no solution.
The only thing that is the solution is to use the current version of node.js.
uninstall nodejs completely(restart your pc) and reinstall it using chocolatey and follow other commands from https://facebook.github.io/react-native/docs/getting-started.
worked perfectly fine for me!
Even if you have installed react-native globally and still get the same try adding path of npm module (C:\Users\your user name\AppData\Roaming\npm) to system variables instead of user variables.
I know it's too late, anyway
Make sure you've added the path of the NPM in system variable rather than user variable in the System Environment Variables.
PATH : C:\Users\user_name\AppData\Roaming\npm
Open a the command prompt and type: npm config list:
Get the path underlined in red and add it your system path (change two back slashes into one), for example: C:\Users\YOURNAME\AppData\Roaming\npm.
This solved the issue for me
I just wrote "react-native -v" to console to check have I still react-native and then just I wrote "react-native run-android" again and this time it worked. Yes just that. React native is terrible technology.
Looks like I have uninstalled react native cli by mistake, I tried all answers mentioned above, but the below command worked for me.
npx react-native run-android.
Solution
I was facing 'react-native' is not recognized as an internal or external command,operable program or batch file error when I was running react-native start in VsCode.
I Solved it by running npm install -g react-native-cli in PowerShell
Steps to follow
run PowerShell as admin (important step)
run running npm install -g react-native-cli in PowerShell
close VsCode and rerun it
that's all!
I solve this problem by running
npm install -g react-native-cli
then another error appears
Command run-android unrecognized.
I fixed this error by
npm install
Use npx before your command
npx react-native
Not just
react-native
if you faced the same issue as me just type :
npm i react-native
then try to create a new project as its recommended by the react native doc by typing :
npx react-native init yourProjectName
this should resolve your problem
hope this was helpful