I am querying dynamically tables where some of the tables might not have specific column. My intention is check the existence of the column and dynamically assign a value. Basically if all the tables would contain the field I would just write simply :
select name, count(k_val) from tbl GROUP by 1
But in my case I need to do something like this:
select name,
SUM( (CASE when (select EXISTS( SELECT * FROM pg_table_def WHERE tablename = 'tbl'
and "column" = 'k_val'))
then 1 else 0 end) ) as val
from tbl GROUP by 1
I am getting the error:
SQL Error [500310] [0A000]: Amazon Invalid operation:
Specified types or functions (one per INFO message) not supported on
Redshift tables.;
The following is a trick that works on most databases to handle missing columns.
select t.*,
(select k_val -- intentionally not qualified
from tbl t2
where t2.pk = t.pk
) new_k_val
from tbl t cross join
(select NULL as k_val) k;
pk is the primary key column for the table. This uses scoping rules to find a value for k_val. If k_val is in the table, then the subquery will use the value from that row. If not, then the scope will "reach out" and take the value from k. There is no confusion in this case, because k_val is not in tbl.
If you don't want a constant subquery for some reason, you can always use:
(select NULL as k_val from t limit 1) k
You can then use this as a subquery or CTE for your aggregation purposes.
Having said all that, I am wary of handling missing columns this way.
Related
I need to render a query such that every column contains the count of a respective table.
The code I have now is:
SELECT COUNT(table1.Id),
COUNT(table2.Id),
COUNT(table3.Id)
FROM table1,
table2,
table3
WHERE table1.done = 'No' OR
table2.done = 'No' OR
table3.done = 'No' OR
But I need the query to return the same result values as if every table would be counted independently, like:
SELECT COUNT(tableX.Id) FROM tableX WHERE talbeX.done = 'No'
where the 'X' stands for 1,2 or 3.
How can this be achived with SQL?
Thanks beforhand for the help.
Just use a nested sub query, exactly as you have explained it:
SELECT
(SELECT COUNT(table1.Id) FROM table1 WHERE table1.done = 'No') as T1Count,
(SELECT COUNT(table2.Id) FROM table2 WHERE table2.done = 'No') as T2Count,
(SELECT COUNT(table3.Id) FROM table3 WHERE table3.done = 'No') as T3Count,
(SELECT COUNT(tableN.Id) FROM tableN) as TNCount;
This will query the tables independently so you are free to use what ever additional criteria you may need without trying to correlate the results from each query
FROM in this case is not strictly necessary in the outer query as we are not returning rows from any specific table, there is no table that we could specify in the from clause. Each RDBMS has their own convention for these types of queries, MS SQL Server and Oracle are to predominant database engines used in Outsystems
If we did specify a table in FROM then this would return 1 row for every record in that table, which is inefficient and not required. So it is important that we do not include a FROM clause.
Transact-SQL - FROM
The FROM clause is usually required on the SELECT statement. The exception is when no table columns are listed, and the only items listed are literals or variables or arithmetic expressions.
ORACLE - DUAL Table
DUAL is a table automatically created by Oracle Database along with the data dictionary. DUAL is in the schema of the user SYS but is accessible by the name DUAL to all users. It has one column, DUMMY, defined to be VARCHAR2(1), and contains one row with a value X. Selecting from the DUAL table is useful for computing a constant expression with the SELECT statement. Because DUAL has only one row, the constant is returned only once. Alternatively, you can select a constant, pseudocolumn, or expression from any table, but the value will be returned as many times as there are rows in the table.
Update - OP is using Oracle!
After attempting the solution, OP responded that it raised the following error:
Error in advanced query SQL2: ORA-00923: FROM keyword not found where expected
The ORA prefix of this error number indicates that the data store is actually an Oracle implementation, so we need to append the FROM DUAL to the query.
SELECT
(SELECT COUNT(table1.Id) FROM table1 WHERE table1.done = 'No') as T1Count,
(SELECT COUNT(table2.Id) FROM table2 WHERE table2.done = 'No') as T2Count,
(SELECT COUNT(table3.Id) FROM table3 WHERE table3.done = 'No') as T3Count,
(SELECT COUNT(tableN.Id) FROM tableN) as TNCount
FROM DUAL;
I have the following table:
id symbol_01 symbol_02
1 abc xyz
2 kjh okd
3 que qid
I need a query that ensures symbol_01 and symbol_02 are both contained in a list of valid symbols. In other words I would needs something like this:
select *
from mytable
where symbol_01 in (
select valid_symbols
from somewhere)
and symbol_02 in (
select valid_symbols
from somewhere)
The above example would work correctly, but the subquery used to determine the list of valid symbols is identical both times and is quite large. It would be very innefficient to run it twice like in the example.
Is there a way to do this without duplicating two identical sub queries?
Another approach:
select *
from mytable t1
where 2 = (select count(distinct symbol)
from valid_symbols vs
where vs.symbol in (t1.symbol_01, t1.symbol_02));
This assumes that the valid symbols are stored in a table valid_symbols that has a column named symbol. The query would also benefit from an index on valid_symbols.symbol
You could try use a CTE like;
WITH ValidSymbols AS (
SELECT DISTINCT valid_symbol
FROM somewhere
)
SELECT mt.*
FROM MyTable mt
INNER JOIN ValidSymbols v1
ON mt.symbol_01 = v1.valid_symbol
INNER JOIN ValidSymbols v2
ON mt.symbol_02 = v2.valid_symbol
From a performance perspective, your query is the right way to do this. I would write it as:
select *
from mytable t
where exists (select 1
from valid_symbols vs
where t.symbol_01 = vs.valid_symbol
) and
exists (select 1
from valid_symbols vs
where t.symbol_02 = vs.valid_symbol
) ;
The important component is that you need an index on valid_symbols(valid_symbol). With this index, the lookup should be pretty fast. Appropriate indexes can even work if valid_symbols is a view, although the effect depends on the complexity of the view.
You seem to have a situation where you have two foreign key relationships. If you explicitly declare these relationships, then the database will enforce that the columns in your table match the valid symbols.
i have a problem in a db2 query
I tried run this query
SELECT t.* ,
CASE WHEN column in (SELECT data FROM otherTable WHERE conditions...)
then 5
else 0
end as 'My new data'
FROM table t
WHERE conditions....
But get error
[Error Code: -115, SQL State: 42601] [SQL0115] Comparison operator IN not valid.
When i change the sub-query to where statement like this
SELECT t.*
FROM table t
WHERE column in (SELECT data FROM otherTable WHERE conditions...)
Works fine
Why not work in the case statement? It is a limitation of db2?
And could make an equivalent behavior?
One way to do this is to left join to the table and check if it is not null.
In most cases this will be the fastest way because SQL servers are optimized to perform joins very quickly (but will depend on a number of factors including data model, indexes, data size, etc).
Like this:
SELECT t.* ,
CASE WHEN othertable.data is not null
then 5
else 0
end as 'My new data'
FROM table t
left join otherTable ON otherTable.column = data
WHERE conditions....
Try with using exists condition as below (put the column value in the where clause of subquery) :
SELECT t.* ,
CASE WHEN exists (SELECT data FROM otherTable WHERE conditions... and column=val)
then 5
else 0
end as 'My new data'
FROM table t
WHERE conditions....
I've got a database like this one:
I'm trying to create a query that would enable me to update the value of the status attribute inside the incident table whenever the values of all of these three attributes: tabor_vatrogasci, tabor_policija, and tabor_hitna are contained inside the izvještaj_tabora table as a value of the oznaka_tabora attribute. If, for example, the values of the tabor_vatrogasci, tabor_policija, and tabor_hitna attributes are 3, 4 and 5 respectively, the incident table should be updated if (and only if) 3, 4, and 5 are contained inside the izvještaj_tabora table.
This is what I tried, but it didn't work:
UPDATE incident SET status='Otvoren' FROM tabor,izvjestaj_tabora
WHERE (incident.tabor_policija=tabor.oznaka
OR incident.tabor_vatrogasci=tabor.oznaka
OR incident.tabor_hitna=tabor.oznaka)
AND izvjestaj_tabora.oznaka_tabora=tabor.oznaka
AND rezultat_izvjestaja='Riješen' AND
((SELECT EXISTS(SELECT DISTINCT oznaka_tabora FROM izvjestaj_tabora)
WHERE oznaka_tabora=incident.tabor_policija) OR tabor_policija=NULL) AND
((SELECT EXISTS(SELECT DISTINCT oznaka_tabora FROM izvjestaj_tabora)
WHERE oznaka_tabora=incident.tabor_vatrogasci) OR tabor_vatrogasci=NULL) AND
((SELECT EXISTS(SELECT DISTINCT oznaka_tabora FROM izvjestaj_tabora)
WHERE oznaka_tabora=incident.tabor_hitna) OR tabor_hitna=NULL);
Does anyone have any idea on how to accomplish this?
Asuming INCIDENT.OZNAKA is the key and you need all 3 to be ralated for the event to open (I am Slovenian that why I understand ;) )
UPDATE incident
SET status='Otvoren'
WHERE oznaka in (
SELECT DISTINCT i.oznaka
FROM incident i
INNER JOIN izvještaj_tabora t1 ON i.tabor_vatrogasci = t1.oznaka_tabora
INNER JOIN izvještaj_tabora t2 ON i.tabor_policija = t2.oznaka_tabora
INNER JOIN izvještaj_tabora t3 ON i.tabor_hitna = t3.oznaka_tabora
WHERE t1.rezultat_izvjestaja='Riješen' AND t2.rezultat_izvjestaja='Riješen' AND t3.rezultat_izvjestaja='Riješen'
)
According to your description the query should look something like this:
UPDATE incident i
SET status = 'Otvoren'
WHERE (tabor_policija IS NULL OR
EXISTS (
SELECT 1 FROM izvjestaj_tabora t
WHERE t.oznaka_tabora = i.tabor_policija
)
)
AND (tabor_vatrogasci IS NULL OR
EXISTS (
SELECT 1 FROM izvjestaj_tabora t
WHERE t.oznaka_tabora = i.tabor_vatrogasci
)
)
AND (tabor_hitna IS NULL OR
EXISTS (
SELECT 1 FROM izvjestaj_tabora t
WHERE t.oznaka_tabora = i.tabor_hitna
)
)
I wonder though, why the connecting table tabor is irrelevant to the operation.
Among other things you fell victim to two widespread misconceptions:
1)
tabor_policija=NULL
This expression aways results in NULL. Since NULL is considered "unknown", if you compare it to anything, the outcome is "unknown" as well. I quote the manual on Comparison Operators:
Do not write expression = NULL because NULL is not "equal to" NULL.
(The null value represents an unknown value, and it is not known
whether two unknown values are equal.)
2)
EXISTS(SELECT DISTINCT oznaka_tabora FROM ...)
In an EXISTS semi-join SELECT items are completely irrelevant. (I use SELECT 1 instead). As the term implies, only existence is checked. The expression returns TRUE or FALSE, SELECT items are ignored. It is particularly pointless to add a DISTINCT clause there.
I am attempting to use a case statement but keep getting errors. Here's the statement:
select TABLE1.acct,
CASE
WHEN TABLE1.acct_id in (select acct_id
from TABLE2
group by acct_id
having count(*) = 1 ) THEN
(select name
from TABLE3
where TABLE1.acct_id = TABLE3.acct_id)
ELSE 'All Others'
END as Name
from TABLE1
When I replace the TABLE1.acct_id in the THEN expression with a literal value, the query works. When I try to use TABLE1.acct_id from the WHEN part of the query, I get a error saying the result is more than one row. It seems like the THEN expression is ignoring the single value that the WHEN statement was using. No idea, maybe this isn't even a valid use of the CASE statement.
I am trying to see names for accounts that have one entry in TABLE2.
Any ideas would be appreciated, I'm kind of new at SQL.
First, you are missing a comma after TABLE1.acct. Second, you have aliased TABLE1 as acct, so you should use that.
Select acct.acct
, Case
When acct.acct_id in ( Select acct_id
From TABLE2
Group By acct_id
Having Count(*) = 1 )
Then ( Select name
From TABLE3
Where acct.acct_id = TABLE3.acct_id
Fetch First 1 Rows Only)
Else 'All Others'
End as Name
From TABLE1 As acct
As others have said, you should adjust your THEN clause to ensure that only one value is returned. You can do that by add Fetch First 1 Rows Only to your subquery.
Then ( Select name
From TABLE3
Where acct.acct_id = TABLE3.acct_id
Fetch First 1 Rows Only)
Fetch is not accepting in CASE statement - "Keyword FETCH not expected. Valid tokens: ) UNION EXCEPT. "
select name from TABLE3 where TABLE1.acct_id = TABLE3.acct_id
will give you all the names in Table3, which have a accompanying row in Table 1. The row selected from Table2 in the previous line doesn't enter into it.
Must be getting more than one value.
You can replace the body with...
(select count(name) from TABLE3 where TABLE1.acct_id = TABLE3.acct_id)
... to narrow down which rows are returning multiples.
It may be the case that you just need a DISTINCT or a TOP 1 to reduce your result set.
Good luck!
I think that what is happening here is that your case must return a single value because it will be the value for the "name" column. The subquery (select acct_id from TABLE2 group by acct_id having count(*) = 1 ) is OK because it will only ever return one value. (select name from TABLE3 where TABLE1.acct_id= TABLE3.acct_id) could return multiple values depending on your data. The problem is you trying to shove multiple values into a single field for a single row.
The next thing to do would be to find out what data causes multiple rows to be returned by (select name from TABLE3 where TABLE1.acct_id= TABLE3.acct_id), and see if you can further limit this query to only return one row. If need be, you could even try something like ...AND ROWNUM = 1 (for Oracle - other DBs have similar ways of limiting rows returned).