Related
I have a table hobby and another table hobbyValue.
Hobby Table
===========
hobbies (It is a list of hobbies which user has inserted using checkbox. It gets stores hobby as Ids with a delimiter ^ for e.g hobbyId1^hobbyId2^hobbyId3^)
Hobby Value Table (it has two columns id, Value)
============
hobbyId1 | Football
hobbyId2 | baseball
hobbyId3 | chess
I am restricted to use this kind of table format because it is part of a big application. I am not sure how can I write a sql function where input string is hobbies from Hobby table and out put will be its values.
for e.g.
============================
string inputHobbies = hobbies from Hobby table , hobbyId1^hobbyId2^hobbyId3^
outputValues = input my_sql_function(inputHobbies)
outputValues should be football,baseball,chess
I dont even know how should I start for to get this.
Firstly, you will need some string split capability. If you are on Sql Server 2016+, there should be built in STRING_SPLIT function (https://learn.microsoft.com/en-us/sql/t-sql/functions/string-split-transact-sql).
If not, you can use one below, which I've got some time ago from another SO question.
CREATE FUNCTION fnc_splitstring ( #stringToSplit VARCHAR(MAX) )
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE CHARINDEX('^', #stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX('^', #stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
INSERT INTO #returnList
SELECT #stringToSplit
RETURN
END
Then you can split your hobby ids and join them onto the Hobby table, get the actual name and STUFF the results into a single result row again:
CREATE FUNCTION fnc_getHobbies (#listOfHobbyIds NVARCHAR(MAX))
RETURNS NVARCHAR(MAX)
AS
BEGIN
DECLARE #hobbies NVARCHAR(MAX)
SELECT #hobbies = STUFF(( SELECT ',' + hobby
FROM dbo.fnc_splitstring(#listOfHobbyIds) hb
INNER JOIN hobby h on h.id = hb.name
FOR XML PATH('')
), 1, 1, '')
RETURN #hobbies
END
End usage like below:
SELECT dbo.fnc_getHobbies(hobbyids)
FROM hobbies
Lastly, here is the SQL Fiddle for this: http://sqlfiddle.com/#!18/44cd9
CREATE FUNCTION [dbo].[SplitForDelimiter] -- a table-valued function
(
#delimiter VARCHAR(10),
#input VARCHAR(1000)
)
RETURNS #tempTable TABLE(
data VARCHAR(100)
)
BEGIN
DECLARE #tempstr VARCHAR(1000)
SET #tempstr = #input
WHILE(charindex(#delimiter,#tempstr,0) > 0)
BEGIN
DECLARE #t VARCHAR(100)
SET #t = Substring(#tempstr,0,(charindex(#delimiter,#tempstr,0)))
INSERT into #tempTable (data) VALUES (#t)
SET #tempstr = Substring(#tempstr,charindex(#delimiter,#tempstr,0)+1,Len(#tempstr))
if(charindex(#delimiter,#tempstr,0) <=0)
BEGIN
INSERT into #tempTable (data) VALUES (#tempstr)
END
END
Then
SELECT Value from HobbyValue HV
WHERE ID IN (select * from SplitForDelimiter('^','hobbyId1^hobbyId2^hobbyId3^'))
declare #List varchar(25) = '2,3,4'
declare #Delinquencies table (id int);
insert into #Delinquencies(id) values('2'),('3'),('4'); --Line in question
#List is being populated with a string populated from an SSRS report for which choices they have picked. Now the way my stored procedure is running, I need to be able insert into my table variable based on what varchar list is coming through. How can I insert into a table variable with a dynamic varchar list? What is listed here is about as close to the testing format as I can come.
I am using SQL Server 2008.
Example
#List = '1'
insert into #Delinquencies(id) values('1')
And any combination up to
#List = '1,2,3,4'
insert into #Delinquencies(id) values('1'),('2'),('3'),('4')
Using one of the split string functions from here..
declare #List varchar(25) = '2,3,4';
declare #Delinquencies table (id int);
;with cte
as
(select * from
[dbo].[SplitStrings_Numbers](#list,',')
)
insert into #Delinquencies(id)
select * from cte
u need to create a dbo.StringSplit function
which takes two parameter (string, delimiter)
CREATE function [dbo].[StringSplit](
#String varchar (max),
#Delimiter nvarchar (10)
)
returns #ValueTable table ([Value] varchar(max))
begin
declare #NextString varchar(max)
declare #Pos int
declare #NextPos int
declare #CommaCheck nvarchar(1)
--Initialize
set #NextString = ''
set #CommaCheck = right(#String,1)
--Check for trailing Comma, if not exists, INSERT
--if (#CommaCheck <> #Delimiter )
set #String = #String + #Delimiter
--Get position of first Comma
set #Pos = charindex(#Delimiter,#String)
set #NextPos = 1
--Loop while there is still a comma in the String of levels
while (#pos <> 0)
begin
set #NextString = substring(#String,1,#Pos - 1)
insert into #ValueTable ( [Value]) Values (#NextString)
set #String = substring(#String,#pos +1,len(#String))
set #NextPos = #Pos
set #pos = charindex(#Delimiter,#String)
end
return
end
and then you can use it like below
declare #List varchar(25) = '2,3,4'
SELECT value from dbo.StringSplit(#List,',')
Here is a parser which returns the sequence as well.
For example:
Select * from [dbo].[udf-Str-Parse]('126,256,512',',')
Returns
Key_PS Key_Value
1 126
2 256
3 512
The UDF
CREATE FUNCTION [dbo].[udf-Str-Parse] (#String varchar(max),#Delimeter varchar(10))
--Usage: Select * from [dbo].[udf-Str-Parse]('Dog,Cat,House,Car',',')
-- Select * from [dbo].[udf-Str-Parse]('John Cappelletti was here',' ')
Returns #ReturnTable Table (Key_PS int IDENTITY(1,1), Key_Value varchar(max))
As
Begin
Declare #XML xml;Set #XML = Cast('<x>' + Replace(#String,#Delimeter,'</x><x>')+'</x>' as XML)
Insert Into #ReturnTable Select Key_Value = ltrim(rtrim(String.value('.', 'varchar(max)'))) FROM #XML.nodes('x') as T(String)
Return
End
I have a SQL Server 2008 R2 column containing a string which I need to split by a comma. I have seen many answers on StackOverflow but none of them works in R2. I have made sure I have select permissions on any split function examples. Any help greatly appreciated.
I've used this SQL before which may work for you:-
CREATE FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(MAX) )
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE CHARINDEX(',', #stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(',', #stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
INSERT INTO #returnList
SELECT #stringToSplit
RETURN
END
and to use it:-
SELECT * FROM dbo.splitstring('91,12,65,78,56,789')
Instead of recursive CTEs and while loops, has anyone considered a more set-based approach? Note that this function was written for the question, which was based on SQL Server 2008 and comma as the delimiter. In SQL Server 2016 and above (and in compatibility level 130 and above), STRING_SPLIT() is a better option.
CREATE FUNCTION dbo.SplitString
(
#List nvarchar(max),
#Delim nvarchar(255)
)
RETURNS TABLE
AS
RETURN ( SELECT [Value] FROM
(
SELECT [Value] = LTRIM(RTRIM(SUBSTRING(#List, [Number],
CHARINDEX(#Delim, #List + #Delim, [Number]) - [Number])))
FROM (SELECT Number = ROW_NUMBER() OVER (ORDER BY name)
FROM sys.all_columns) AS x WHERE Number <= LEN(#List)
AND SUBSTRING(#Delim + #List, [Number], DATALENGTH(#Delim)/2) = #Delim
) AS y
);
GO
If you want to avoid the limitation of the length of the string being <= the number of rows in sys.all_columns (9,980 in model in SQL Server 2017; much higher in your own user databases), you can use other approaches for deriving the numbers, such as building your own table of numbers. You could also use a recursive CTE in cases where you can't use system tables or create your own:
CREATE FUNCTION dbo.SplitString
(
#List nvarchar(max),
#Delim nvarchar(255)
)
RETURNS TABLE WITH SCHEMABINDING
AS
RETURN ( WITH n(n) AS (SELECT 1 UNION ALL SELECT n+1
FROM n WHERE n <= LEN(#List))
SELECT [Value] = SUBSTRING(#List, n,
CHARINDEX(#Delim, #List + #Delim, n) - n)
FROM n WHERE n <= LEN(#List)
AND SUBSTRING(#Delim + #List, n, DATALENGTH(#Delim)/2) = #Delim
);
GO
But you'll have to append OPTION (MAXRECURSION 0) (or MAXRECURSION <longest possible string length if < 32768>) to the outer query in order to avoid errors with recursion for strings > 100 characters. If that is also not a good alternative then see this answer as pointed out in the comments, or this answer if you need an ordered split string function.
(Also, the delimiter will have to be NCHAR(<=1228). Still researching why.)
More on split functions, why (and proof that) while loops and recursive CTEs don't scale, and better alternatives, if you're splitting strings coming from the application layer:
Splitting strings
Finally the wait is over in SQL Server 2016 they have introduced Split string function : STRING_SPLIT
select * From STRING_SPLIT ('a,b', ',') cs
All the other methods to split string like XML, Tally table, while loop, etc.. has been blown away by this STRING_SPLIT function.
Here is an excellent article with performance comparison : Performance Surprises and Assumptions : STRING_SPLIT
The easiest way to do this is by using XML format.
1. Converting string to rows without table
QUERY
DECLARE #String varchar(100) = 'String1,String2,String3'
-- To change ',' to any other delimeter, just change ',' to your desired one
DECLARE #Delimiter CHAR = ','
SELECT LTRIM(RTRIM(Split.a.value('.', 'VARCHAR(100)'))) 'Value'
FROM
(
SELECT CAST ('<M>' + REPLACE(#String, #Delimiter, '</M><M>') + '</M>' AS XML) AS Data
) AS A
CROSS APPLY Data.nodes ('/M') AS Split(a)
RESULT
x---------x
| Value |
x---------x
| String1 |
| String2 |
| String3 |
x---------x
2. Converting to rows from a table which have an ID for each CSV row
SOURCE TABLE
x-----x--------------------------x
| Id | Value |
x-----x--------------------------x
| 1 | String1,String2,String3 |
| 2 | String4,String5,String6 |
x-----x--------------------------x
QUERY
-- To change ',' to any other delimeter, just change ',' before '</M><M>' to your desired one
DECLARE #Delimiter CHAR = ','
SELECT ID,LTRIM(RTRIM(Split.a.value('.', 'VARCHAR(100)'))) 'Value'
FROM
(
SELECT ID,CAST ('<M>' + REPLACE(VALUE, #Delimiter, '</M><M>') + '</M>' AS XML) AS Data
FROM TABLENAME
) AS A
CROSS APPLY Data.nodes ('/M') AS Split(a)
RESULT
x-----x----------x
| Id | Value |
x-----x----------x
| 1 | String1 |
| 1 | String2 |
| 1 | String3 |
| 2 | String4 |
| 2 | String5 |
| 2 | String6 |
x-----x----------x
I needed a quick way to get rid of the +4 from a zip code.
UPDATE #Emails
SET ZIPCode = SUBSTRING(ZIPCode, 1, (CHARINDEX('-', ZIPCODE)-1))
WHERE ZIPCode LIKE '%-%'
No proc... no UDF... just one tight little inline command that does what it must. Not fancy, not elegant.
Change the delimiter as needed, etc, and it will work for anything.
if you replace
WHILE CHARINDEX(',', #stringToSplit) > 0
with
WHILE LEN(#stringToSplit) > 0
you can eliminate that last insert after the while loop!
CREATE FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(MAX) )
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE LEN(#stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(',', #stringToSplit)
if #pos = 0
SELECT #pos = LEN(#stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
RETURN
END
The often used approach with XML elements breaks in case of forbidden characters. This is an approach to use this method with any kind of character, even with the semicolon as delimiter.
The trick is, first to use SELECT SomeString AS [*] FOR XML PATH('') to get all forbidden characters properly escaped. That's the reason, why I replace the delimiter to a magic value to avoid troubles with ; as delimiter.
DECLARE #Dummy TABLE (ID INT, SomeTextToSplit NVARCHAR(MAX))
INSERT INTO #Dummy VALUES
(1,N'A&B;C;D;E, F')
,(2,N'"C" & ''D'';<C>;D;E, F');
DECLARE #Delimiter NVARCHAR(10)=';'; --special effort needed (due to entities coding with "&code;")!
WITH Casted AS
(
SELECT *
,CAST(N'<x>' + REPLACE((SELECT REPLACE(SomeTextToSplit,#Delimiter,N'§§Split$me$here§§') AS [*] FOR XML PATH('')),N'§§Split$me$here§§',N'</x><x>') + N'</x>' AS XML) AS SplitMe
FROM #Dummy
)
SELECT Casted.ID
,x.value(N'.',N'nvarchar(max)') AS Part
FROM Casted
CROSS APPLY SplitMe.nodes(N'/x') AS A(x)
The result
ID Part
1 A&B
1 C
1 D
1 E, F
2 "C" & 'D'
2 <C>
2 D
2 E, F
All the functions for string splitting that use some kind of Loop-ing (iterations) have bad performance. They should be replaced with set-based solution.
This code executes excellent.
CREATE FUNCTION dbo.SplitStrings
(
#List NVARCHAR(MAX),
#Delimiter NVARCHAR(255)
)
RETURNS TABLE
WITH SCHEMABINDING
AS
RETURN
(
SELECT Item = y.i.value('(./text())[1]', 'nvarchar(4000)')
FROM
(
SELECT x = CONVERT(XML, '<i>'
+ REPLACE(#List, #Delimiter, '</i><i>')
+ '</i>').query('.')
) AS a CROSS APPLY x.nodes('i') AS y(i)
);
GO
I had to write something like this recently. Here's the solution I came up with. It's generalized for any delimiter string and I think it would perform slightly better:
CREATE FUNCTION [dbo].[SplitString]
( #string nvarchar(4000)
, #delim nvarchar(100) )
RETURNS
#result TABLE
( [Value] nvarchar(4000) NOT NULL
, [Index] int NOT NULL )
AS
BEGIN
DECLARE #str nvarchar(4000)
, #pos int
, #prv int = 1
SELECT #pos = CHARINDEX(#delim, #string)
WHILE #pos > 0
BEGIN
SELECT #str = SUBSTRING(#string, #prv, #pos - #prv)
INSERT INTO #result SELECT #str, #prv
SELECT #prv = #pos + LEN(#delim)
, #pos = CHARINDEX(#delim, #string, #pos + 1)
END
INSERT INTO #result SELECT SUBSTRING(#string, #prv, 4000), #prv
RETURN
END
If you need a quick ad-hoc solution for common cases with minimum code, then this recursive CTE two-liner will do it:
DECLARE #s VARCHAR(200) = ',1,2,,3,,,4,,,,5,'
;WITH
a AS (SELECT i=-1, j=0 UNION ALL SELECT j, CHARINDEX(',', #s, j + 1) FROM a WHERE j > i),
b AS (SELECT SUBSTRING(#s, i+1, IIF(j>0, j, LEN(#s)+1)-i-1) s FROM a WHERE i >= 0)
SELECT * FROM b
Either use this as a stand-alone statement or just add the above CTEs to any of your queries and you will be able to join the resulting table b with others for use in any further expressions.
edit (by Shnugo)
If you add a counter, you will get a position index together with the List:
DECLARE #s VARCHAR(200) = '1,2333,344,4'
;WITH
a AS (SELECT n=0, i=-1, j=0 UNION ALL SELECT n+1, j, CHARINDEX(',', #s, j+1) FROM a WHERE j > i),
b AS (SELECT n, SUBSTRING(#s, i+1, IIF(j>0, j, LEN(#s)+1)-i-1) s FROM a WHERE i >= 0)
SELECT * FROM b;
The result:
n s
1 1
2 2333
3 344
4 4
I take the xml route by wrapping the values into elements (M but anything works):
declare #v nvarchar(max) = '100,201,abcde'
select
a.value('.', 'varchar(max)')
from
(select cast('<M>' + REPLACE(#v, ',', '</M><M>') + '</M>' AS XML) as col) as A
CROSS APPLY A.col.nodes ('/M') AS Split(a)
A solution using a CTE, if anyone should need that (apart from me, who obviously did, that is why I wrote it).
declare #StringToSplit varchar(100) = 'Test1,Test2,Test3';
declare #SplitChar varchar(10) = ',';
with StringToSplit as (
select
ltrim( rtrim( substring( #StringToSplit, 1, charindex( #SplitChar, #StringToSplit ) - 1 ) ) ) Head
, substring( #StringToSplit, charindex( #SplitChar, #StringToSplit ) + 1, len( #StringToSplit ) ) Tail
union all
select
ltrim( rtrim( substring( Tail, 1, charindex( #SplitChar, Tail ) - 1 ) ) ) Head
, substring( Tail, charindex( #SplitChar, Tail ) + 1, len( Tail ) ) Tail
from StringToSplit
where charindex( #SplitChar, Tail ) > 0
union all
select
ltrim( rtrim( Tail ) ) Head
, '' Tail
from StringToSplit
where charindex( #SplitChar, Tail ) = 0
and len( Tail ) > 0
)
select Head from StringToSplit
This is more narrowly-tailored. When I do this I usually have a comma-delimited list of unique ids (INT or BIGINT), which I want to cast as a table to use as an inner join to another table that has a primary key of INT or BIGINT. I want an in-line table-valued function returned so that I have the most efficient join possible.
Sample usage would be:
DECLARE #IDs VARCHAR(1000);
SET #IDs = ',99,206,124,8967,1,7,3,45234,2,889,987979,';
SELECT me.Value
FROM dbo.MyEnum me
INNER JOIN dbo.GetIntIdsTableFromDelimitedString(#IDs) ids ON me.PrimaryKey = ids.ID
I stole the idea from http://sqlrecords.blogspot.com/2012/11/converting-delimited-list-to-table.html, changing it to be in-line table-valued and cast as INT.
create function dbo.GetIntIDTableFromDelimitedString
(
#IDs VARCHAR(1000) --this parameter must start and end with a comma, eg ',123,456,'
--all items in list must be perfectly formatted or function will error
)
RETURNS TABLE AS
RETURN
SELECT
CAST(SUBSTRING(#IDs,Nums.number + 1,CHARINDEX(',',#IDs,(Nums.number+2)) - Nums.number - 1) AS INT) AS ID
FROM
[master].[dbo].[spt_values] Nums
WHERE Nums.Type = 'P'
AND Nums.number BETWEEN 1 AND DATALENGTH(#IDs)
AND SUBSTRING(#IDs,Nums.number,1) = ','
AND CHARINDEX(',',#IDs,(Nums.number+1)) > Nums.number;
GO
There is a correct version on here but I thought it would be nice to add a little fault tolerance in case they have a trailing comma as well as make it so you could use it not as a function but as part of a larger piece of code. Just in case you're only using it once time and don't need a function. This is also for integers (which is what I needed it for) so you might have to change your data types.
DECLARE #StringToSeperate VARCHAR(10)
SET #StringToSeperate = '1,2,5'
--SELECT #StringToSeperate IDs INTO #Test
DROP TABLE #IDs
CREATE TABLE #IDs (ID int)
DECLARE #CommaSeperatedValue NVARCHAR(255) = ''
DECLARE #Position INT = LEN(#StringToSeperate)
--Add Each Value
WHILE CHARINDEX(',', #StringToSeperate) > 0
BEGIN
SELECT #Position = CHARINDEX(',', #StringToSeperate)
SELECT #CommaSeperatedValue = SUBSTRING(#StringToSeperate, 1, #Position-1)
INSERT INTO #IDs
SELECT #CommaSeperatedValue
SELECT #StringToSeperate = SUBSTRING(#StringToSeperate, #Position+1, LEN(#StringToSeperate)-#Position)
END
--Add Last Value
IF (LEN(LTRIM(RTRIM(#StringToSeperate)))>0)
BEGIN
INSERT INTO #IDs
SELECT SUBSTRING(#StringToSeperate, 1, #Position)
END
SELECT * FROM #IDs
I modified +Andy Robinson's function a little bit. Now you can select only required part from returning table:
CREATE FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(MAX) )
RETURNS
#returnList TABLE ([numOrder] [tinyint] , [Name] [nvarchar] (500)) AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
DECLARE #orderNum INT
SET #orderNum=0
WHILE CHARINDEX('.', #stringToSplit) > 0
BEGIN
SELECT #orderNum=#orderNum+1;
SELECT #pos = CHARINDEX('.', #stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #orderNum,#name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
SELECT #orderNum=#orderNum+1;
INSERT INTO #returnList
SELECT #orderNum, #stringToSplit
RETURN
END
Usage:
SELECT Name FROM dbo.splitstring('ELIS.YD.CRP1.1.CBA.MDSP.T389.BT') WHERE numOrder=5
Simples
DECLARE #String varchar(100) = '11,21,84,85,87'
SELECT * FROM TB_PAPEL WHERE CD_PAPEL IN (SELECT value FROM STRING_SPLIT(#String, ','))
-- EQUIVALENTE
SELECT * FROM TB_PAPEL WHERE CD_PAPEL IN (11,21,84,85,87)
here is a version that can split on a pattern using patindex, a simple adaptation of the post above. I had a case where I needed to split a string that contained multiple separator chars.
alter FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(1000), #splitPattern varchar(10) )
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE PATINDEX(#splitPattern, #stringToSplit) > 0
BEGIN
SELECT #pos = PATINDEX(#splitPattern, #stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
INSERT INTO #returnList
SELECT #stringToSplit
RETURN
END
select * from dbo.splitstring('stringa/stringb/x,y,z','%[/,]%');
result looks like this
stringa
stringb
x
y
z
Personnaly I use this function :
ALTER FUNCTION [dbo].[CUST_SplitString]
(
#String NVARCHAR(4000),
#Delimiter NCHAR(1)
)
RETURNS TABLE
AS
RETURN
(
WITH Split(stpos,endpos)
AS(
SELECT 0 AS stpos, CHARINDEX(#Delimiter,#String) AS endpos
UNION ALL
SELECT endpos+1, CHARINDEX(#Delimiter,#String,endpos+1)
FROM Split
WHERE endpos > 0
)
SELECT 'Id' = ROW_NUMBER() OVER (ORDER BY (SELECT 1)),
'Data' = SUBSTRING(#String,stpos,COALESCE(NULLIF(endpos,0),LEN(#String)+1)-stpos)
FROM Split
)
I have developed a double Splitter (Takes two split characters) as requested Here. Could be of some value in this thread seeing its the most referenced for queries relating to string splitting.
CREATE FUNCTION uft_DoubleSplitter
(
-- Add the parameters for the function here
#String VARCHAR(4000),
#Splitter1 CHAR,
#Splitter2 CHAR
)
RETURNS #Result TABLE (Id INT,MId INT,SValue VARCHAR(4000))
AS
BEGIN
DECLARE #FResult TABLE(Id INT IDENTITY(1, 1),
SValue VARCHAR(4000))
DECLARE #SResult TABLE(Id INT IDENTITY(1, 1),
MId INT,
SValue VARCHAR(4000))
SET #String = #String+#Splitter1
WHILE CHARINDEX(#Splitter1, #String) > 0
BEGIN
DECLARE #WorkingString VARCHAR(4000) = NULL
SET #WorkingString = SUBSTRING(#String, 1, CHARINDEX(#Splitter1, #String) - 1)
--Print #workingString
INSERT INTO #FResult
SELECT CASE
WHEN #WorkingString = '' THEN NULL
ELSE #WorkingString
END
SET #String = SUBSTRING(#String, LEN(#WorkingString) + 2, LEN(#String))
END
IF ISNULL(#Splitter2, '') != ''
BEGIN
DECLARE #OStartLoop INT
DECLARE #OEndLoop INT
SELECT #OStartLoop = MIN(Id),
#OEndLoop = MAX(Id)
FROM #FResult
WHILE #OStartLoop <= #OEndLoop
BEGIN
DECLARE #iString VARCHAR(4000)
DECLARE #iMId INT
SELECT #iString = SValue+#Splitter2,
#iMId = Id
FROM #FResult
WHERE Id = #OStartLoop
WHILE CHARINDEX(#Splitter2, #iString) > 0
BEGIN
DECLARE #iWorkingString VARCHAR(4000) = NULL
SET #IWorkingString = SUBSTRING(#iString, 1, CHARINDEX(#Splitter2, #iString) - 1)
INSERT INTO #SResult
SELECT #iMId,
CASE
WHEN #iWorkingString = '' THEN NULL
ELSE #iWorkingString
END
SET #iString = SUBSTRING(#iString, LEN(#iWorkingString) + 2, LEN(#iString))
END
SET #OStartLoop = #OStartLoop + 1
END
INSERT INTO #Result
SELECT MId AS PrimarySplitID,
ROW_NUMBER() OVER (PARTITION BY MId ORDER BY Mid, Id) AS SecondarySplitID ,
SValue
FROM #SResult
END
ELSE
BEGIN
INSERT INTO #Result
SELECT Id AS PrimarySplitID,
NULL AS SecondarySplitID,
SValue
FROM #FResult
END
RETURN
Usage:
--FirstSplit
SELECT * FROM uft_DoubleSplitter('ValueA=ValueB=ValueC=ValueD==ValueE&ValueA=ValueB=ValueC===ValueE&ValueA=ValueB==ValueD===','&',NULL)
--Second Split
SELECT * FROM uft_DoubleSplitter('ValueA=ValueB=ValueC=ValueD==ValueE&ValueA=ValueB=ValueC===ValueE&ValueA=ValueB==ValueD===','&','=')
Possible Usage (Get second value of each split):
SELECT fn.SValue
FROM uft_DoubleSplitter('ValueA=ValueB=ValueC=ValueD==ValueE&ValueA=ValueB=ValueC===ValueE&ValueA=ValueB==ValueD===', '&', '=')AS fn
WHERE fn.mid = 2
A recursive cte based solution
declare #T table (iden int identity, col1 varchar(100));
insert into #T(col1) values
('ROOT/South America/Lima/Test/Test2')
, ('ROOT/South America/Peru/Test/Test2')
, ('ROOT//South America/Venuzuala ')
, ('RtT/South America / ')
, ('ROOT/South Americas// ');
declare #split char(1) = '/';
select #split as split;
with cte as
( select t.iden, case when SUBSTRING(REVERSE(rtrim(t.col1)), 1, 1) = #split then LTRIM(RTRIM(t.col1)) else LTRIM(RTRIM(t.col1)) + #split end as col1, 0 as pos , 1 as cnt
from #T t
union all
select t.iden, t.col1 , charindex(#split, t.col1, t.pos + 1), cnt + 1
from cte t
where charindex(#split, t.col1, t.pos + 1) > 0
)
select t1.*, t2.pos, t2.cnt
, ltrim(rtrim(SUBSTRING(t1.col1, t1.pos+1, t2.pos-t1.pos-1))) as bingo
from cte t1
join cte t2
on t2.iden = t1.iden
and t2.cnt = t1.cnt+1
and t2.pos > t1.pos
order by t1.iden, t1.cnt;
With all due respect to #AviG this is the bug free version of function deviced by him to return all the tokens in full.
IF EXISTS (SELECT * FROM sys.objects WHERE type = 'TF' AND name = 'TF_SplitString')
DROP FUNCTION [dbo].[TF_SplitString]
GO
-- =============================================
-- Author: AviG
-- Amendments: Parameterize the delimeter and included the missing chars in last token - Gemunu Wickremasinghe
-- Description: Tabel valued function that Breaks the delimeted string by given delimeter and returns a tabel having split results
-- Usage
-- select * from [dbo].[TF_SplitString]('token1,token2,,,,,,,,token969',',')
-- 969 items should be returned
-- select * from [dbo].[TF_SplitString]('4672978261,4672978255',',')
-- 2 items should be returned
-- =============================================
CREATE FUNCTION dbo.TF_SplitString
( #stringToSplit VARCHAR(MAX) ,
#delimeter char = ','
)
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE LEN(#stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(#delimeter, #stringToSplit)
if #pos = 0
BEGIN
SELECT #pos = LEN(#stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos)
END
else
BEGIN
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
END
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
RETURN
END
This is based on Andy Robertson's answer, I needed a delimiter other than comma.
CREATE FUNCTION dbo.splitstring ( #stringToSplit nvarchar(MAX), #delim nvarchar(max))
RETURNS
#returnList TABLE ([value] [nvarchar] (MAX))
AS
BEGIN
DECLARE #value NVARCHAR(max)
DECLARE #pos INT
WHILE CHARINDEX(#delim, #stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(#delim, #stringToSplit)
SELECT #value = SUBSTRING(#stringToSplit, 1, #pos - 1)
INSERT INTO #returnList
SELECT #value
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos + LEN(#delim), LEN(#stringToSplit) - #pos)
END
INSERT INTO #returnList
SELECT #stringToSplit
RETURN
END
GO
And to use it:
SELECT * FROM dbo.splitstring('test1 test2 test3', ' ');
(Tested on SQL Server 2008 R2)
EDIT: correct test code
ALTER FUNCTION [dbo].func_split_string
(
#input as varchar(max),
#delimiter as varchar(10) = ";"
)
RETURNS #result TABLE
(
id smallint identity(1,1),
csv_value varchar(max) not null
)
AS
BEGIN
DECLARE #pos AS INT;
DECLARE #string AS VARCHAR(MAX) = '';
WHILE LEN(#input) > 0
BEGIN
SELECT #pos = CHARINDEX(#delimiter,#input);
IF(#pos<=0)
select #pos = len(#input)
IF(#pos <> LEN(#input))
SELECT #string = SUBSTRING(#input, 1, #pos-1);
ELSE
SELECT #string = SUBSTRING(#input, 1, #pos);
INSERT INTO #result SELECT #string
SELECT #input = SUBSTRING(#input, #pos+len(#delimiter), LEN(#input)-#pos)
END
RETURN
END
You can Use this function:
CREATE FUNCTION SplitString
(
#Input NVARCHAR(MAX),
#Character CHAR(1)
)
RETURNS #Output TABLE (
Item NVARCHAR(1000)
)
AS
BEGIN
DECLARE #StartIndex INT, #EndIndex INT
SET #StartIndex = 1
IF SUBSTRING(#Input, LEN(#Input) - 1, LEN(#Input)) <> #Character
BEGIN
SET #Input = #Input + #Character
END
WHILE CHARINDEX(#Character, #Input) > 0
BEGIN
SET #EndIndex = CHARINDEX(#Character, #Input)
INSERT INTO #Output(Item)
SELECT SUBSTRING(#Input, #StartIndex, #EndIndex - 1)
SET #Input = SUBSTRING(#Input, #EndIndex + 1, LEN(#Input))
END
RETURN
END
GO
Here is an example that you can use as function or also you can put the same logic in procedure.
--SELECT * from [dbo].fn_SplitString ;
CREATE FUNCTION [dbo].[fn_SplitString]
(#CSV VARCHAR(MAX), #Delimeter VARCHAR(100) = ',')
RETURNS #retTable TABLE
(
[value] VARCHAR(MAX) NULL
)AS
BEGIN
DECLARE
#vCSV VARCHAR (MAX) = #CSV,
#vDelimeter VARCHAR (100) = #Delimeter;
IF #vDelimeter = ';'
BEGIN
SET #vCSV = REPLACE(#vCSV, ';', '~!~#~');
SET #vDelimeter = REPLACE(#vDelimeter, ';', '~!~#~');
END;
SET #vCSV = REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(#vCSV, '&', '&'), '<', '<'), '>', '>'), '''', '''), '"', '"');
DECLARE #xml XML;
SET #xml = '<i>' + REPLACE(#vCSV, #vDelimeter, '</i><i>') + '</i>';
INSERT INTO #retTable
SELECT
x.i.value('.', 'varchar(max)') AS COLUMNNAME
FROM #xml.nodes('//i')AS x(i);
RETURN;
END;
/*
Answer to T-SQL split string
Based on answers from Andy Robinson and AviG
Enhanced functionality ref: LEN function not including trailing spaces in SQL Server
This 'file' should be valid as both a markdown file and an SQL file
*/
CREATE FUNCTION dbo.splitstring ( --CREATE OR ALTER
#stringToSplit NVARCHAR(MAX)
) RETURNS #returnList TABLE ([Item] NVARCHAR (MAX))
AS BEGIN
DECLARE #name NVARCHAR(MAX)
DECLARE #pos BIGINT
SET #stringToSplit = #stringToSplit + ',' -- this should allow entries that end with a `,` to have a blank value in that "column"
WHILE ((LEN(#stringToSplit+'_') > 1)) BEGIN -- `+'_'` gets around LEN trimming terminal spaces. See URL referenced above
SET #pos = COALESCE(NULLIF(CHARINDEX(',', #stringToSplit),0),LEN(#stringToSplit+'_')) -- COALESCE grabs first non-null value
SET #name = SUBSTRING(#stringToSplit, 1, #pos-1) --MAX size of string of type nvarchar is 4000
SET #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, 4000) -- With SUBSTRING fn (MS web): "If start is greater than the number of characters in the value expression, a zero-length expression is returned."
INSERT INTO #returnList SELECT #name --additional debugging parameters below can be added
-- + ' pos:' + CAST(#pos as nvarchar) + ' remain:''' + #stringToSplit + '''(' + CAST(LEN(#stringToSplit+'_')-1 as nvarchar) + ')'
END
RETURN
END
GO
/*
Test cases: see URL referenced as "enhanced functionality" above
SELECT *,LEN(Item+'_')-1 'L' from splitstring('a,,b')
Item | L
--- | ---
a | 1
| 0
b | 1
SELECT *,LEN(Item+'_')-1 'L' from splitstring('a,,')
Item | L
--- | ---
a | 1
| 0
| 0
SELECT *,LEN(Item+'_')-1 'L' from splitstring('a,, ')
Item | L
--- | ---
a | 1
| 0
| 1
SELECT *,LEN(Item+'_')-1 'L' from splitstring('a,, c ')
Item | L
--- | ---
a | 1
| 0
c | 3
*/
The easiest way:
Install SQL Server 2016
Use STRING_SPLIT https://msdn.microsoft.com/en-us/library/mt684588.aspx
It works even in express edition :).
I have a list of ids separated by comma like:
1,17,25,44,46,67,88
I want to convert them to a table records ( into a temporary table ) like
#tempTable
number_
--------
1
17
25
44
46
67
88
It is possible with a function, a table-valued one ?
Why I want this ? I want to use for INNER JOIN clause (into stored procedure) with another table(s) like as:
SELECT a,b,c FROM T1
INNER JOIN functionNameWhichReturnsTable
ON functionNameWhichReturnsTable.number_ = T1.a
I cannot use IN because I will use stored procedure which accepts a parameter of type NVARCHAR. That parameter will provide the list of ids.
Thank you
Possible duplicate of separate comma separated values and store in table in sql server.
Please try a precise one from Comma-Delimited Value to Table:
CREATE FUNCTION [dbo].[ufn_CSVToTable] ( #StringInput VARCHAR(8000), #Delimiter nvarchar(1))
RETURNS #OutputTable TABLE ( [String] VARCHAR(10) )
AS
BEGIN
DECLARE #String VARCHAR(10)
WHILE LEN(#StringInput) > 0
BEGIN
SET #String = LEFT(#StringInput,
ISNULL(NULLIF(CHARINDEX(#Delimiter, #StringInput) - 1, -1),
LEN(#StringInput)))
SET #StringInput = SUBSTRING(#StringInput,
ISNULL(NULLIF(CHARINDEX(#Delimiter, #StringInput), 0),
LEN(#StringInput)) + 1, LEN(#StringInput))
INSERT INTO #OutputTable ( [String] )
VALUES ( #String )
END
RETURN
END
GO
Check the requirement in other way using XML:
DECLARE #param NVARCHAR(MAX)
SET #param = '1:0,2:1,3:1,4:0'
SELECT
Split.a.value('.', 'VARCHAR(100)') AS CVS
FROM
(
SELECT CAST ('<M>' + REPLACE(#param, ',', '</M><M>') + '</M>' AS XML) AS CVS
) AS A CROSS APPLY CVS.nodes ('/M') AS Split(a)
Here's a trick that doesn't need a function or XML.
Basically the string gets transformed into a single insert statement for a temporary table.
The temp table can then be used for further processing.
IF OBJECT_ID('tempdb..#tmpNum') IS NOT NULL
DROP TABLE #tmpNum;
CREATE TABLE #tmpNum (num int);
DECLARE #TEXT varchar(max) = '1,17,25,44,46,67,88';
DECLARE #InsertStatement varchar(max);
SET #InsertStatement = 'insert into #tmpNum (num) values ('+REPLACE(#TEXT,',','),(')+');';
EXEC (#InsertStatement);
-- use the temp table
SELECT *
FROM YourTable t
WHERE t.id IN (SELECT DISTINCT num FROM #tmpNum);
This method is usable for up to 1000 values.
Because 1000 is the max limit of a row value expression.
Also, as Stuart Ainsworth pointed out.
Since this method uses Dynamic Sql, be wary of code injection and don't use it for strings based on user input.
Side-note
Starting from MS Sql Server 2016, one could simply use the STRING_SPLIT function.
DECLARE #TEXT varchar(max);
SET #TEXT = '1,17,25,44,46,67,88';
SELECT t.*
FROM YourTable t
JOIN (SELECT DISTINCT CAST(value AS INT) num FROM STRING_SPLIT(#TEXT, ',')) nums
ON t.id = nums.num;
Completing the answers, you could also use the CSV string to store multiple values in multiple columns:
--input sql text
declare #text_IN varchar(max) ='text1, text1.2, text1.3, 1, 2010-01-01\r\n text2, text2.2, text2.3, 2, 2016-01-01'
Split the csv file into rows:
declare #temptable table (csvRow varchar(max))
declare #DelimiterInit varchar(4) = '\r\n'
declare #Delimiter varchar(1) = '|'
declare #idx int
declare #slice varchar(max)
set #text_IN = REPLACE(#text_IN,#DelimiterInit,#Delimiter)
select #idx = 1
if len(#text_IN)<1 or #text_IN is null return
while #idx!= 0
begin
set #idx = charindex(#Delimiter,#text_IN)
if #idx!=0
set #slice = left(#text_IN,#idx - 1)
else
set #slice = #text_IN
if(len(#slice)>0)
insert into #temptable(csvRow) values(#slice)
set #text_IN = right(#text_IN,len(#text_IN) - #idx)
if len(#text_IN) = 0 break
end
Split rows into columns:
;WITH XMLTable (xmlTag)
AS
(
SELECT CONVERT(XML,'<CSV><champ>' + REPLACE(csvRow,',', '</champ><champ>') + '</champ></CSV>') AS xmlTag
FROM #temptable
)
SELECT RTRIM(LTRIM(xmlTag.value('/CSV[1]/champ[1]','varchar(max)'))) AS Column1,
RTRIM(LTRIM(xmlTag.value('/CSV[1]/champ[2]','varchar(max)'))) AS Column2,
RTRIM(LTRIM(xmlTag.value('/CSV[1]/champ[3]','varchar(max)'))) AS Column3,
RTRIM(LTRIM(xmlTag.value('/CSV[1]/champ[4]','int'))) AS Column4,
RTRIM(LTRIM(xmlTag.value('/CSV[1]/champ[5]','datetime'))) AS Column5
FROM XMLTable
The following works:
declare #parStoreNo As varchar(8000) = '1,2,3,4'
CREATE TABLE #parStoreNo (StoreNo INT)-- drop #parStoreNo
declare #temptable VARCHAR(1000) = #parStoreNo
declare #SQL VARCHAR(1000)
SELECT #SQL = CONVERT(VARCHAR(1000),' select ' + REPLACE(ISNULL(#temptable,' NULL '),',', ' AS Col UNION ALL SELECT '))
INSERT #parStoreNo (StoreNo)
EXEC (#SQL)
I am using XML Function as below...
DECLARE #str VARCHAR(4000) = '6,7,7,8,10,12,13,14,16,44,46,47,394,396,417,488,714,717,718,719,722,725,811,818,832,833,836,837,846,913,914,919,922,923,924,925,926,927,927,928,929,929,930,931,932,934,935,1029,1072,1187,1188,1192,1196,1197,1199,1199,1199,1199,1200,1201,1202,1203,1204,1205,1206,1207,1208,1209,1366,1367,1387,1388,1666,1759,1870,2042,2045,2163,2261,2374,2445,2550,2676,2879,2880,2881,2892,2893,2894'
Declare #x XML
select #x = cast('<A>'+ replace(#str,',','</A><A>')+ '</A>' as xml)
select t.value('.', 'int') as inVal
from #x.nodes('/A') as x(t)
I prefer this because not need to create any separate function and proc. Also I don't have to opt dynamic SQL query which I prefer most.
Convert Comma Separated String to Table
DECLARE #str VARCHAR(4000) = '6,7,7,8,10,12,13,14,16,44,46,47,394,396,417,488,714,717,718,719,722,725,811,818,832'
DECLARE #x XML
select #x = cast('<A>'+ replace(#str,',','</A><A>')+ '</A>' as xml)
select t.value('.', 'int') as inVal
from #x.nodes('/A') as x(t)
Try this code
SELECT RTRIM(part) as part
INTO Table_Name
FROM dbo.splitstring(#Your_Comma_string,',')
splitstring Function is as follows
CREATE FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(MAX) )
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE CHARINDEX(',', #stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(',', #stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
INSERT INTO #returnList
SELECT #stringToSplit
RETURN
END
I have a SQL Server 2008 R2 column containing a string which I need to split by a comma. I have seen many answers on StackOverflow but none of them works in R2. I have made sure I have select permissions on any split function examples. Any help greatly appreciated.
I've used this SQL before which may work for you:-
CREATE FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(MAX) )
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE CHARINDEX(',', #stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(',', #stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
INSERT INTO #returnList
SELECT #stringToSplit
RETURN
END
and to use it:-
SELECT * FROM dbo.splitstring('91,12,65,78,56,789')
Instead of recursive CTEs and while loops, has anyone considered a more set-based approach? Note that this function was written for the question, which was based on SQL Server 2008 and comma as the delimiter. In SQL Server 2016 and above (and in compatibility level 130 and above), STRING_SPLIT() is a better option.
CREATE FUNCTION dbo.SplitString
(
#List nvarchar(max),
#Delim nvarchar(255)
)
RETURNS TABLE
AS
RETURN ( SELECT [Value] FROM
(
SELECT [Value] = LTRIM(RTRIM(SUBSTRING(#List, [Number],
CHARINDEX(#Delim, #List + #Delim, [Number]) - [Number])))
FROM (SELECT Number = ROW_NUMBER() OVER (ORDER BY name)
FROM sys.all_columns) AS x WHERE Number <= LEN(#List)
AND SUBSTRING(#Delim + #List, [Number], DATALENGTH(#Delim)/2) = #Delim
) AS y
);
GO
If you want to avoid the limitation of the length of the string being <= the number of rows in sys.all_columns (9,980 in model in SQL Server 2017; much higher in your own user databases), you can use other approaches for deriving the numbers, such as building your own table of numbers. You could also use a recursive CTE in cases where you can't use system tables or create your own:
CREATE FUNCTION dbo.SplitString
(
#List nvarchar(max),
#Delim nvarchar(255)
)
RETURNS TABLE WITH SCHEMABINDING
AS
RETURN ( WITH n(n) AS (SELECT 1 UNION ALL SELECT n+1
FROM n WHERE n <= LEN(#List))
SELECT [Value] = SUBSTRING(#List, n,
CHARINDEX(#Delim, #List + #Delim, n) - n)
FROM n WHERE n <= LEN(#List)
AND SUBSTRING(#Delim + #List, n, DATALENGTH(#Delim)/2) = #Delim
);
GO
But you'll have to append OPTION (MAXRECURSION 0) (or MAXRECURSION <longest possible string length if < 32768>) to the outer query in order to avoid errors with recursion for strings > 100 characters. If that is also not a good alternative then see this answer as pointed out in the comments, or this answer if you need an ordered split string function.
(Also, the delimiter will have to be NCHAR(<=1228). Still researching why.)
More on split functions, why (and proof that) while loops and recursive CTEs don't scale, and better alternatives, if you're splitting strings coming from the application layer:
Splitting strings
Finally the wait is over in SQL Server 2016 they have introduced Split string function : STRING_SPLIT
select * From STRING_SPLIT ('a,b', ',') cs
All the other methods to split string like XML, Tally table, while loop, etc.. has been blown away by this STRING_SPLIT function.
Here is an excellent article with performance comparison : Performance Surprises and Assumptions : STRING_SPLIT
The easiest way to do this is by using XML format.
1. Converting string to rows without table
QUERY
DECLARE #String varchar(100) = 'String1,String2,String3'
-- To change ',' to any other delimeter, just change ',' to your desired one
DECLARE #Delimiter CHAR = ','
SELECT LTRIM(RTRIM(Split.a.value('.', 'VARCHAR(100)'))) 'Value'
FROM
(
SELECT CAST ('<M>' + REPLACE(#String, #Delimiter, '</M><M>') + '</M>' AS XML) AS Data
) AS A
CROSS APPLY Data.nodes ('/M') AS Split(a)
RESULT
x---------x
| Value |
x---------x
| String1 |
| String2 |
| String3 |
x---------x
2. Converting to rows from a table which have an ID for each CSV row
SOURCE TABLE
x-----x--------------------------x
| Id | Value |
x-----x--------------------------x
| 1 | String1,String2,String3 |
| 2 | String4,String5,String6 |
x-----x--------------------------x
QUERY
-- To change ',' to any other delimeter, just change ',' before '</M><M>' to your desired one
DECLARE #Delimiter CHAR = ','
SELECT ID,LTRIM(RTRIM(Split.a.value('.', 'VARCHAR(100)'))) 'Value'
FROM
(
SELECT ID,CAST ('<M>' + REPLACE(VALUE, #Delimiter, '</M><M>') + '</M>' AS XML) AS Data
FROM TABLENAME
) AS A
CROSS APPLY Data.nodes ('/M') AS Split(a)
RESULT
x-----x----------x
| Id | Value |
x-----x----------x
| 1 | String1 |
| 1 | String2 |
| 1 | String3 |
| 2 | String4 |
| 2 | String5 |
| 2 | String6 |
x-----x----------x
I needed a quick way to get rid of the +4 from a zip code.
UPDATE #Emails
SET ZIPCode = SUBSTRING(ZIPCode, 1, (CHARINDEX('-', ZIPCODE)-1))
WHERE ZIPCode LIKE '%-%'
No proc... no UDF... just one tight little inline command that does what it must. Not fancy, not elegant.
Change the delimiter as needed, etc, and it will work for anything.
if you replace
WHILE CHARINDEX(',', #stringToSplit) > 0
with
WHILE LEN(#stringToSplit) > 0
you can eliminate that last insert after the while loop!
CREATE FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(MAX) )
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE LEN(#stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(',', #stringToSplit)
if #pos = 0
SELECT #pos = LEN(#stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
RETURN
END
The often used approach with XML elements breaks in case of forbidden characters. This is an approach to use this method with any kind of character, even with the semicolon as delimiter.
The trick is, first to use SELECT SomeString AS [*] FOR XML PATH('') to get all forbidden characters properly escaped. That's the reason, why I replace the delimiter to a magic value to avoid troubles with ; as delimiter.
DECLARE #Dummy TABLE (ID INT, SomeTextToSplit NVARCHAR(MAX))
INSERT INTO #Dummy VALUES
(1,N'A&B;C;D;E, F')
,(2,N'"C" & ''D'';<C>;D;E, F');
DECLARE #Delimiter NVARCHAR(10)=';'; --special effort needed (due to entities coding with "&code;")!
WITH Casted AS
(
SELECT *
,CAST(N'<x>' + REPLACE((SELECT REPLACE(SomeTextToSplit,#Delimiter,N'§§Split$me$here§§') AS [*] FOR XML PATH('')),N'§§Split$me$here§§',N'</x><x>') + N'</x>' AS XML) AS SplitMe
FROM #Dummy
)
SELECT Casted.ID
,x.value(N'.',N'nvarchar(max)') AS Part
FROM Casted
CROSS APPLY SplitMe.nodes(N'/x') AS A(x)
The result
ID Part
1 A&B
1 C
1 D
1 E, F
2 "C" & 'D'
2 <C>
2 D
2 E, F
All the functions for string splitting that use some kind of Loop-ing (iterations) have bad performance. They should be replaced with set-based solution.
This code executes excellent.
CREATE FUNCTION dbo.SplitStrings
(
#List NVARCHAR(MAX),
#Delimiter NVARCHAR(255)
)
RETURNS TABLE
WITH SCHEMABINDING
AS
RETURN
(
SELECT Item = y.i.value('(./text())[1]', 'nvarchar(4000)')
FROM
(
SELECT x = CONVERT(XML, '<i>'
+ REPLACE(#List, #Delimiter, '</i><i>')
+ '</i>').query('.')
) AS a CROSS APPLY x.nodes('i') AS y(i)
);
GO
I had to write something like this recently. Here's the solution I came up with. It's generalized for any delimiter string and I think it would perform slightly better:
CREATE FUNCTION [dbo].[SplitString]
( #string nvarchar(4000)
, #delim nvarchar(100) )
RETURNS
#result TABLE
( [Value] nvarchar(4000) NOT NULL
, [Index] int NOT NULL )
AS
BEGIN
DECLARE #str nvarchar(4000)
, #pos int
, #prv int = 1
SELECT #pos = CHARINDEX(#delim, #string)
WHILE #pos > 0
BEGIN
SELECT #str = SUBSTRING(#string, #prv, #pos - #prv)
INSERT INTO #result SELECT #str, #prv
SELECT #prv = #pos + LEN(#delim)
, #pos = CHARINDEX(#delim, #string, #pos + 1)
END
INSERT INTO #result SELECT SUBSTRING(#string, #prv, 4000), #prv
RETURN
END
If you need a quick ad-hoc solution for common cases with minimum code, then this recursive CTE two-liner will do it:
DECLARE #s VARCHAR(200) = ',1,2,,3,,,4,,,,5,'
;WITH
a AS (SELECT i=-1, j=0 UNION ALL SELECT j, CHARINDEX(',', #s, j + 1) FROM a WHERE j > i),
b AS (SELECT SUBSTRING(#s, i+1, IIF(j>0, j, LEN(#s)+1)-i-1) s FROM a WHERE i >= 0)
SELECT * FROM b
Either use this as a stand-alone statement or just add the above CTEs to any of your queries and you will be able to join the resulting table b with others for use in any further expressions.
edit (by Shnugo)
If you add a counter, you will get a position index together with the List:
DECLARE #s VARCHAR(200) = '1,2333,344,4'
;WITH
a AS (SELECT n=0, i=-1, j=0 UNION ALL SELECT n+1, j, CHARINDEX(',', #s, j+1) FROM a WHERE j > i),
b AS (SELECT n, SUBSTRING(#s, i+1, IIF(j>0, j, LEN(#s)+1)-i-1) s FROM a WHERE i >= 0)
SELECT * FROM b;
The result:
n s
1 1
2 2333
3 344
4 4
I take the xml route by wrapping the values into elements (M but anything works):
declare #v nvarchar(max) = '100,201,abcde'
select
a.value('.', 'varchar(max)')
from
(select cast('<M>' + REPLACE(#v, ',', '</M><M>') + '</M>' AS XML) as col) as A
CROSS APPLY A.col.nodes ('/M') AS Split(a)
A solution using a CTE, if anyone should need that (apart from me, who obviously did, that is why I wrote it).
declare #StringToSplit varchar(100) = 'Test1,Test2,Test3';
declare #SplitChar varchar(10) = ',';
with StringToSplit as (
select
ltrim( rtrim( substring( #StringToSplit, 1, charindex( #SplitChar, #StringToSplit ) - 1 ) ) ) Head
, substring( #StringToSplit, charindex( #SplitChar, #StringToSplit ) + 1, len( #StringToSplit ) ) Tail
union all
select
ltrim( rtrim( substring( Tail, 1, charindex( #SplitChar, Tail ) - 1 ) ) ) Head
, substring( Tail, charindex( #SplitChar, Tail ) + 1, len( Tail ) ) Tail
from StringToSplit
where charindex( #SplitChar, Tail ) > 0
union all
select
ltrim( rtrim( Tail ) ) Head
, '' Tail
from StringToSplit
where charindex( #SplitChar, Tail ) = 0
and len( Tail ) > 0
)
select Head from StringToSplit
This is more narrowly-tailored. When I do this I usually have a comma-delimited list of unique ids (INT or BIGINT), which I want to cast as a table to use as an inner join to another table that has a primary key of INT or BIGINT. I want an in-line table-valued function returned so that I have the most efficient join possible.
Sample usage would be:
DECLARE #IDs VARCHAR(1000);
SET #IDs = ',99,206,124,8967,1,7,3,45234,2,889,987979,';
SELECT me.Value
FROM dbo.MyEnum me
INNER JOIN dbo.GetIntIdsTableFromDelimitedString(#IDs) ids ON me.PrimaryKey = ids.ID
I stole the idea from http://sqlrecords.blogspot.com/2012/11/converting-delimited-list-to-table.html, changing it to be in-line table-valued and cast as INT.
create function dbo.GetIntIDTableFromDelimitedString
(
#IDs VARCHAR(1000) --this parameter must start and end with a comma, eg ',123,456,'
--all items in list must be perfectly formatted or function will error
)
RETURNS TABLE AS
RETURN
SELECT
CAST(SUBSTRING(#IDs,Nums.number + 1,CHARINDEX(',',#IDs,(Nums.number+2)) - Nums.number - 1) AS INT) AS ID
FROM
[master].[dbo].[spt_values] Nums
WHERE Nums.Type = 'P'
AND Nums.number BETWEEN 1 AND DATALENGTH(#IDs)
AND SUBSTRING(#IDs,Nums.number,1) = ','
AND CHARINDEX(',',#IDs,(Nums.number+1)) > Nums.number;
GO
There is a correct version on here but I thought it would be nice to add a little fault tolerance in case they have a trailing comma as well as make it so you could use it not as a function but as part of a larger piece of code. Just in case you're only using it once time and don't need a function. This is also for integers (which is what I needed it for) so you might have to change your data types.
DECLARE #StringToSeperate VARCHAR(10)
SET #StringToSeperate = '1,2,5'
--SELECT #StringToSeperate IDs INTO #Test
DROP TABLE #IDs
CREATE TABLE #IDs (ID int)
DECLARE #CommaSeperatedValue NVARCHAR(255) = ''
DECLARE #Position INT = LEN(#StringToSeperate)
--Add Each Value
WHILE CHARINDEX(',', #StringToSeperate) > 0
BEGIN
SELECT #Position = CHARINDEX(',', #StringToSeperate)
SELECT #CommaSeperatedValue = SUBSTRING(#StringToSeperate, 1, #Position-1)
INSERT INTO #IDs
SELECT #CommaSeperatedValue
SELECT #StringToSeperate = SUBSTRING(#StringToSeperate, #Position+1, LEN(#StringToSeperate)-#Position)
END
--Add Last Value
IF (LEN(LTRIM(RTRIM(#StringToSeperate)))>0)
BEGIN
INSERT INTO #IDs
SELECT SUBSTRING(#StringToSeperate, 1, #Position)
END
SELECT * FROM #IDs
I modified +Andy Robinson's function a little bit. Now you can select only required part from returning table:
CREATE FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(MAX) )
RETURNS
#returnList TABLE ([numOrder] [tinyint] , [Name] [nvarchar] (500)) AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
DECLARE #orderNum INT
SET #orderNum=0
WHILE CHARINDEX('.', #stringToSplit) > 0
BEGIN
SELECT #orderNum=#orderNum+1;
SELECT #pos = CHARINDEX('.', #stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #orderNum,#name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
SELECT #orderNum=#orderNum+1;
INSERT INTO #returnList
SELECT #orderNum, #stringToSplit
RETURN
END
Usage:
SELECT Name FROM dbo.splitstring('ELIS.YD.CRP1.1.CBA.MDSP.T389.BT') WHERE numOrder=5
Simples
DECLARE #String varchar(100) = '11,21,84,85,87'
SELECT * FROM TB_PAPEL WHERE CD_PAPEL IN (SELECT value FROM STRING_SPLIT(#String, ','))
-- EQUIVALENTE
SELECT * FROM TB_PAPEL WHERE CD_PAPEL IN (11,21,84,85,87)
here is a version that can split on a pattern using patindex, a simple adaptation of the post above. I had a case where I needed to split a string that contained multiple separator chars.
alter FUNCTION dbo.splitstring ( #stringToSplit VARCHAR(1000), #splitPattern varchar(10) )
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE PATINDEX(#splitPattern, #stringToSplit) > 0
BEGIN
SELECT #pos = PATINDEX(#splitPattern, #stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
INSERT INTO #returnList
SELECT #stringToSplit
RETURN
END
select * from dbo.splitstring('stringa/stringb/x,y,z','%[/,]%');
result looks like this
stringa
stringb
x
y
z
Personnaly I use this function :
ALTER FUNCTION [dbo].[CUST_SplitString]
(
#String NVARCHAR(4000),
#Delimiter NCHAR(1)
)
RETURNS TABLE
AS
RETURN
(
WITH Split(stpos,endpos)
AS(
SELECT 0 AS stpos, CHARINDEX(#Delimiter,#String) AS endpos
UNION ALL
SELECT endpos+1, CHARINDEX(#Delimiter,#String,endpos+1)
FROM Split
WHERE endpos > 0
)
SELECT 'Id' = ROW_NUMBER() OVER (ORDER BY (SELECT 1)),
'Data' = SUBSTRING(#String,stpos,COALESCE(NULLIF(endpos,0),LEN(#String)+1)-stpos)
FROM Split
)
I have developed a double Splitter (Takes two split characters) as requested Here. Could be of some value in this thread seeing its the most referenced for queries relating to string splitting.
CREATE FUNCTION uft_DoubleSplitter
(
-- Add the parameters for the function here
#String VARCHAR(4000),
#Splitter1 CHAR,
#Splitter2 CHAR
)
RETURNS #Result TABLE (Id INT,MId INT,SValue VARCHAR(4000))
AS
BEGIN
DECLARE #FResult TABLE(Id INT IDENTITY(1, 1),
SValue VARCHAR(4000))
DECLARE #SResult TABLE(Id INT IDENTITY(1, 1),
MId INT,
SValue VARCHAR(4000))
SET #String = #String+#Splitter1
WHILE CHARINDEX(#Splitter1, #String) > 0
BEGIN
DECLARE #WorkingString VARCHAR(4000) = NULL
SET #WorkingString = SUBSTRING(#String, 1, CHARINDEX(#Splitter1, #String) - 1)
--Print #workingString
INSERT INTO #FResult
SELECT CASE
WHEN #WorkingString = '' THEN NULL
ELSE #WorkingString
END
SET #String = SUBSTRING(#String, LEN(#WorkingString) + 2, LEN(#String))
END
IF ISNULL(#Splitter2, '') != ''
BEGIN
DECLARE #OStartLoop INT
DECLARE #OEndLoop INT
SELECT #OStartLoop = MIN(Id),
#OEndLoop = MAX(Id)
FROM #FResult
WHILE #OStartLoop <= #OEndLoop
BEGIN
DECLARE #iString VARCHAR(4000)
DECLARE #iMId INT
SELECT #iString = SValue+#Splitter2,
#iMId = Id
FROM #FResult
WHERE Id = #OStartLoop
WHILE CHARINDEX(#Splitter2, #iString) > 0
BEGIN
DECLARE #iWorkingString VARCHAR(4000) = NULL
SET #IWorkingString = SUBSTRING(#iString, 1, CHARINDEX(#Splitter2, #iString) - 1)
INSERT INTO #SResult
SELECT #iMId,
CASE
WHEN #iWorkingString = '' THEN NULL
ELSE #iWorkingString
END
SET #iString = SUBSTRING(#iString, LEN(#iWorkingString) + 2, LEN(#iString))
END
SET #OStartLoop = #OStartLoop + 1
END
INSERT INTO #Result
SELECT MId AS PrimarySplitID,
ROW_NUMBER() OVER (PARTITION BY MId ORDER BY Mid, Id) AS SecondarySplitID ,
SValue
FROM #SResult
END
ELSE
BEGIN
INSERT INTO #Result
SELECT Id AS PrimarySplitID,
NULL AS SecondarySplitID,
SValue
FROM #FResult
END
RETURN
Usage:
--FirstSplit
SELECT * FROM uft_DoubleSplitter('ValueA=ValueB=ValueC=ValueD==ValueE&ValueA=ValueB=ValueC===ValueE&ValueA=ValueB==ValueD===','&',NULL)
--Second Split
SELECT * FROM uft_DoubleSplitter('ValueA=ValueB=ValueC=ValueD==ValueE&ValueA=ValueB=ValueC===ValueE&ValueA=ValueB==ValueD===','&','=')
Possible Usage (Get second value of each split):
SELECT fn.SValue
FROM uft_DoubleSplitter('ValueA=ValueB=ValueC=ValueD==ValueE&ValueA=ValueB=ValueC===ValueE&ValueA=ValueB==ValueD===', '&', '=')AS fn
WHERE fn.mid = 2
A recursive cte based solution
declare #T table (iden int identity, col1 varchar(100));
insert into #T(col1) values
('ROOT/South America/Lima/Test/Test2')
, ('ROOT/South America/Peru/Test/Test2')
, ('ROOT//South America/Venuzuala ')
, ('RtT/South America / ')
, ('ROOT/South Americas// ');
declare #split char(1) = '/';
select #split as split;
with cte as
( select t.iden, case when SUBSTRING(REVERSE(rtrim(t.col1)), 1, 1) = #split then LTRIM(RTRIM(t.col1)) else LTRIM(RTRIM(t.col1)) + #split end as col1, 0 as pos , 1 as cnt
from #T t
union all
select t.iden, t.col1 , charindex(#split, t.col1, t.pos + 1), cnt + 1
from cte t
where charindex(#split, t.col1, t.pos + 1) > 0
)
select t1.*, t2.pos, t2.cnt
, ltrim(rtrim(SUBSTRING(t1.col1, t1.pos+1, t2.pos-t1.pos-1))) as bingo
from cte t1
join cte t2
on t2.iden = t1.iden
and t2.cnt = t1.cnt+1
and t2.pos > t1.pos
order by t1.iden, t1.cnt;
With all due respect to #AviG this is the bug free version of function deviced by him to return all the tokens in full.
IF EXISTS (SELECT * FROM sys.objects WHERE type = 'TF' AND name = 'TF_SplitString')
DROP FUNCTION [dbo].[TF_SplitString]
GO
-- =============================================
-- Author: AviG
-- Amendments: Parameterize the delimeter and included the missing chars in last token - Gemunu Wickremasinghe
-- Description: Tabel valued function that Breaks the delimeted string by given delimeter and returns a tabel having split results
-- Usage
-- select * from [dbo].[TF_SplitString]('token1,token2,,,,,,,,token969',',')
-- 969 items should be returned
-- select * from [dbo].[TF_SplitString]('4672978261,4672978255',',')
-- 2 items should be returned
-- =============================================
CREATE FUNCTION dbo.TF_SplitString
( #stringToSplit VARCHAR(MAX) ,
#delimeter char = ','
)
RETURNS
#returnList TABLE ([Name] [nvarchar] (500))
AS
BEGIN
DECLARE #name NVARCHAR(255)
DECLARE #pos INT
WHILE LEN(#stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(#delimeter, #stringToSplit)
if #pos = 0
BEGIN
SELECT #pos = LEN(#stringToSplit)
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos)
END
else
BEGIN
SELECT #name = SUBSTRING(#stringToSplit, 1, #pos-1)
END
INSERT INTO #returnList
SELECT #name
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, LEN(#stringToSplit)-#pos)
END
RETURN
END
This is based on Andy Robertson's answer, I needed a delimiter other than comma.
CREATE FUNCTION dbo.splitstring ( #stringToSplit nvarchar(MAX), #delim nvarchar(max))
RETURNS
#returnList TABLE ([value] [nvarchar] (MAX))
AS
BEGIN
DECLARE #value NVARCHAR(max)
DECLARE #pos INT
WHILE CHARINDEX(#delim, #stringToSplit) > 0
BEGIN
SELECT #pos = CHARINDEX(#delim, #stringToSplit)
SELECT #value = SUBSTRING(#stringToSplit, 1, #pos - 1)
INSERT INTO #returnList
SELECT #value
SELECT #stringToSplit = SUBSTRING(#stringToSplit, #pos + LEN(#delim), LEN(#stringToSplit) - #pos)
END
INSERT INTO #returnList
SELECT #stringToSplit
RETURN
END
GO
And to use it:
SELECT * FROM dbo.splitstring('test1 test2 test3', ' ');
(Tested on SQL Server 2008 R2)
EDIT: correct test code
ALTER FUNCTION [dbo].func_split_string
(
#input as varchar(max),
#delimiter as varchar(10) = ";"
)
RETURNS #result TABLE
(
id smallint identity(1,1),
csv_value varchar(max) not null
)
AS
BEGIN
DECLARE #pos AS INT;
DECLARE #string AS VARCHAR(MAX) = '';
WHILE LEN(#input) > 0
BEGIN
SELECT #pos = CHARINDEX(#delimiter,#input);
IF(#pos<=0)
select #pos = len(#input)
IF(#pos <> LEN(#input))
SELECT #string = SUBSTRING(#input, 1, #pos-1);
ELSE
SELECT #string = SUBSTRING(#input, 1, #pos);
INSERT INTO #result SELECT #string
SELECT #input = SUBSTRING(#input, #pos+len(#delimiter), LEN(#input)-#pos)
END
RETURN
END
You can Use this function:
CREATE FUNCTION SplitString
(
#Input NVARCHAR(MAX),
#Character CHAR(1)
)
RETURNS #Output TABLE (
Item NVARCHAR(1000)
)
AS
BEGIN
DECLARE #StartIndex INT, #EndIndex INT
SET #StartIndex = 1
IF SUBSTRING(#Input, LEN(#Input) - 1, LEN(#Input)) <> #Character
BEGIN
SET #Input = #Input + #Character
END
WHILE CHARINDEX(#Character, #Input) > 0
BEGIN
SET #EndIndex = CHARINDEX(#Character, #Input)
INSERT INTO #Output(Item)
SELECT SUBSTRING(#Input, #StartIndex, #EndIndex - 1)
SET #Input = SUBSTRING(#Input, #EndIndex + 1, LEN(#Input))
END
RETURN
END
GO
Here is an example that you can use as function or also you can put the same logic in procedure.
--SELECT * from [dbo].fn_SplitString ;
CREATE FUNCTION [dbo].[fn_SplitString]
(#CSV VARCHAR(MAX), #Delimeter VARCHAR(100) = ',')
RETURNS #retTable TABLE
(
[value] VARCHAR(MAX) NULL
)AS
BEGIN
DECLARE
#vCSV VARCHAR (MAX) = #CSV,
#vDelimeter VARCHAR (100) = #Delimeter;
IF #vDelimeter = ';'
BEGIN
SET #vCSV = REPLACE(#vCSV, ';', '~!~#~');
SET #vDelimeter = REPLACE(#vDelimeter, ';', '~!~#~');
END;
SET #vCSV = REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(#vCSV, '&', '&'), '<', '<'), '>', '>'), '''', '''), '"', '"');
DECLARE #xml XML;
SET #xml = '<i>' + REPLACE(#vCSV, #vDelimeter, '</i><i>') + '</i>';
INSERT INTO #retTable
SELECT
x.i.value('.', 'varchar(max)') AS COLUMNNAME
FROM #xml.nodes('//i')AS x(i);
RETURN;
END;
/*
Answer to T-SQL split string
Based on answers from Andy Robinson and AviG
Enhanced functionality ref: LEN function not including trailing spaces in SQL Server
This 'file' should be valid as both a markdown file and an SQL file
*/
CREATE FUNCTION dbo.splitstring ( --CREATE OR ALTER
#stringToSplit NVARCHAR(MAX)
) RETURNS #returnList TABLE ([Item] NVARCHAR (MAX))
AS BEGIN
DECLARE #name NVARCHAR(MAX)
DECLARE #pos BIGINT
SET #stringToSplit = #stringToSplit + ',' -- this should allow entries that end with a `,` to have a blank value in that "column"
WHILE ((LEN(#stringToSplit+'_') > 1)) BEGIN -- `+'_'` gets around LEN trimming terminal spaces. See URL referenced above
SET #pos = COALESCE(NULLIF(CHARINDEX(',', #stringToSplit),0),LEN(#stringToSplit+'_')) -- COALESCE grabs first non-null value
SET #name = SUBSTRING(#stringToSplit, 1, #pos-1) --MAX size of string of type nvarchar is 4000
SET #stringToSplit = SUBSTRING(#stringToSplit, #pos+1, 4000) -- With SUBSTRING fn (MS web): "If start is greater than the number of characters in the value expression, a zero-length expression is returned."
INSERT INTO #returnList SELECT #name --additional debugging parameters below can be added
-- + ' pos:' + CAST(#pos as nvarchar) + ' remain:''' + #stringToSplit + '''(' + CAST(LEN(#stringToSplit+'_')-1 as nvarchar) + ')'
END
RETURN
END
GO
/*
Test cases: see URL referenced as "enhanced functionality" above
SELECT *,LEN(Item+'_')-1 'L' from splitstring('a,,b')
Item | L
--- | ---
a | 1
| 0
b | 1
SELECT *,LEN(Item+'_')-1 'L' from splitstring('a,,')
Item | L
--- | ---
a | 1
| 0
| 0
SELECT *,LEN(Item+'_')-1 'L' from splitstring('a,, ')
Item | L
--- | ---
a | 1
| 0
| 1
SELECT *,LEN(Item+'_')-1 'L' from splitstring('a,, c ')
Item | L
--- | ---
a | 1
| 0
c | 3
*/
The easiest way:
Install SQL Server 2016
Use STRING_SPLIT https://msdn.microsoft.com/en-us/library/mt684588.aspx
It works even in express edition :).