I know there are similar questions about this but non of them resolve my problem.
I already used virtual host and it was running before until this morning this error occurred when I tried to access this link http://www.notification.test/
I have this kind of error.
Not Found
The requested URL / was not found on this server.
Apache/2.4.27 (Win64) Server at www.notification.test Port 80
I have this in my hosts 127.0.0.1 www.notification.test
and this is my setup in C:\wamp64\bin\apache\apache2.4.27\conf\extra
<VirtualHost *:80>
DocumentRoot C:/wamp64/www/notification/public
ServerName www.notification.test
<Directory C:/wamp64/www/notification/public>
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
I just add the directory as what suggested from another post but didn't work.
My Wamp version is 3.1.0 running in 64 bit windows7 OS and the Apache is 2.4.47.
Need some help guys and thank you.
Basically its just a missing / see the <Directory..... parameter.
<VirtualHost *:80>
ServerName notification.test
ServerAlias www.notification.test
DocumentRoot "C:/wamp64/www/notification/public"
<Directory "C:/wamp64/www/notification/public/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
Also you HOSTS file should look like this
127.0.0.1 localhost
127.0.0.1 notification.test
::1 localhost
::1 notification.test
Note:
Require all granted is a bit unnecessary if you are just using other PC's in your own network. Instead use Require ip 192.168.0 for example, to allow any ip in your local network access but nothing outside your own network.
Related
I have read many posts here and many tutorials as well.. and for some reason.. I just cant get access to my WAMP install/pages/content from other machines on the network?
WAMP 2.4 (still) :)
Here is what I have tried so far:
WAMP install machine IP: 192.168.1.121
I have enabled/disbaled Windows Firewall on the WAMP install machine (completely for testing)
I have created a an INBOUND rule allowing (TCP, on PORT 80, private option selected only, also tried to check public)
Apache httpd.config:
Listen 192.168.1.121:80
Listen 80
Then a bit below:
Order Deny,Allow
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
Allow from 192.168.1.101
Allow from all
Complete:
<Directory "c:/wamp/www">
Options Indexes FollowSymLinks
AllowOverride All
# onlineoffline tag - don't remove
Order Deny,Allow
# Deny from all
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
Allow from 192.168.1.101
Allow from all
</Directory>
I my Apache httpd-vhosts.conf file I have (outside of some other default and test entries) the following:
<VirtualHost *:80>
ServerAdmin webmaster#localhost
DocumentRoot "c:/wamp/www"
ServerName localhost
<Directory "c:/wamp/www/">
Options +Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
ErrorLog "logs/localhost-error.log"
CustomLog "logs/localhost-access.log" common
</VirtualHost>
<VirtualHost *:80>
ServerAdmin webmaster#BarBot.com
DocumentRoot "c:/wamp/www/barbot/"
ServerName BarBot
ErrorLog "logs/BarBot-error.log"
CustomLog "logs/BarBot-access.log" common
<directory "c:/wamp/www/barbot/">
Options +Indexes +FollowSymLinks +MultiViews
Require all granted
#Deny from all
#AllowOverride All
#Allow from 127.0.0.1
#Require all granted
#Require ip 192.168.1
#Require ip 192.168.1:80
</directory>
</VirtualHost>
I grabbed a netbook I had laying around.. plugged it into my network..
loaded up browser and went to:
192.168.1.121
as well as
192.168.1.121:80
192.168.1.121:80/barbot
I will either get:
timed out message on browser..
or more recently
Not found: The requested URL /barbot was not found..etc..etc..
At this point I am lost.. I dont even have a direction to pursue or test with?
I have also tried to toggle putting WAMP online/offline.. neither state seemed to make a difference?
What am I missing here? What things can I test out? And is there a way to check on things? Logs? Errors? Something that will give me direction? Or help get direction at least?)
Update:
Second PC -
IP: 192.168.1.101
I can PING the 192.168.1.121 machine just fine.. never misses a packet.
Final State:
Something is 'working', but must be configured somehow/somewhere?
When I attempt to open: 192.168.1.121:80/barbot (WAMP machine) I get a NOT FOUND (404) page...
If I try to go to say... 192.168.1.121:8080 (I get Unable to Connect page/message)..
Environment
XAMPP 7.2.4 installed on Windows 10
Apache running on ports 80 and 443
Configuration
C:\Windows\System32\drivers\etc\hosts:
127.0.0.1 www.test.local test.local
C:\xampp\apache\conf\httpd.conf:
DocumentRoot "D:/htdocs"
<Directory "D:/htdocs">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Require all granted
</Directory>
C:\xampp\apache\conf\extra\httpd-vhosts.conf:
<VirtualHost *:80>
DocumentRoot D:/htdocs
ServerName localhost
<Directory "D:/htdocs">
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot D:/htdocs
ServerName test.local
<Directory "D:/htdocs">
Allow from all
</Directory>
</VirtualHost>
The problem
When I start Apache and I access to localhost is all right. The problem comes when I try to reach test.local: the browser returns a This site can’t be reached message. It's like XAMPP ignores the custom domain vhosts defined into httpd-vhost.conf file. The same message is displayed with the server off.
This site can’t be reached
The webpage at http://test.local/ might be temporarily down or it may have moved permanently to a new web address.
ERR_ADDRESS_INVALID
A few days ago the setup was working and the only changes that I made was the new software installation. I mean, no changes in Apache config files.
If all your stack were working correctly before, don't be like me and don't forget to check if some browser extension is blocking your local traffic, like some extension related with an antivirus system.
In my case it was the Kaspersky Protection extension. When something goes wrong, it shows the following graphic.
C:\Windows\System32\drivers\etc
127.0.0.1 test.local
C:\xampp\apache\conf\extra\httpd-vhosts.conf:
<VirtualHost *:80>
ServerAdmin webmaster#dummy-host2.example.com
DocumentRoot "C:/wamp64/www/test"
ServerName test.local
<Directory "C:/wamp64/www/hydroboost/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local
</Directory>
</VirtualHost>
Have you updated your C:\Windows\System32\drivers\etc\hosts file with a mapping like this this?
add this line to the end of the hosts file
127.0.0.1 test.local
the localhost domain works without this mapping, because the OS already recognizes "localhost" as a built in alias for the loopback IP address
(this suggestion is assuming that you are running and testing on the same local machine)
I have Wamp Server 3.1.0 installed on my Windows computer.
I am trying to access my sites from other devices, connected are connected on the same network.
I have searched online. And I have followed tutorials, but nothing matches what I need. The closest I got was: How to enable local network users to access my WAMP sites?
My httpd-vhosts.conf looks like this:
# Virtual Hosts
#
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local granted
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerName laravel.dev
DocumentRoot "c:/wamp/projects/forum/public"
<Directory "c:/wamp/projects/forum/public/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local granted
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerName test.dev
DocumentRoot "c:/wamp/projects/test/public"
<Directory "c:/wamp/projects/test/public/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local granted
</Directory>
</VirtualHost>
My expectation at this point is I can go onto another device and access my Wamp Server 3.1.0 and my individual projects.
Unfortunately I'm hit with an Error 500 saying:
Forbiddon
You do not have permission to access / on this server.
_______________________________________________________________
Apache/2.4.27 (Win64) PHP/7.1.9 Server at 192.168.1.21 Port 80
I have double checked my ipconfig and IPv4 Address matches the IP in the Error 500 code: 192.168.1.21
I did notice that the Apache version and PHP version match the versions I am using. So I know I'm accessing the server. Just not sure of the Error 500 code.
I have tried accessing my projects from these URLs:
http://192.168.1.21
http://192.168.1.21:80
http://laravel.dev/
http://test.dev/
http://localhost/
And none of them work.
Thanks in advance.
Change Require local granted to Require all granted, if not solved, Try to edit httpd-vhosts.conf file like this:
# Virtual Hosts
#
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride All
Require local
Require ip 192.168.1
</Directory>
</VirtualHost>
try access your ip computer from other device, for example your computer ip is 192.168.1.4, if you can access this ip, then create your virtual host.
if you can not access that ip, try fixing it so ip can be accessed. then create a virtual hosts.
I want to host multiple websites on my computer. I'm using Windows with WAMP server. I already have domains and know how to map them to ip.
I have already edited httpd.conf file to allow virtual hosts.
My httpd-vhosts file looks like this,
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www"
ServerName localhost
ServerAlias localhost
<Directory "C:/wamp64/www">
AllowOverride All
Require local
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www/testcase"
ServerName test.mydomain.com
<Directory "C:/wamp64/www/testcase">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
Require all granted
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www/test2"
ServerName test2.mydomain.com
<Directory "C:/wamp64/www/test2">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
Require all granted
</Directory>
</VirtualHost>
The problem is that both my domains open only the first site in this VirtualHost tag.
Example: In this case, both my domains will open the WAMP server configuration page. If I were to move the "testcase" tag above the other, both my domains will open the "testcase" page.
Update:
My subdomains show corresponding pages successfully when I open them on the server. But when I open subdomains on another machine, they open the first entry in the VH.
Update 2: Okay, so this is just out of my understanding now. I thought may be WAMP is not my cup of tea. So I installed XAMPP and made changes to the VH configuration and still ended up with same problem. So I then got rid of XAMPP too and installed WAMPDeveloper Pro. What could go wrong when the software sets up all the configuration files for you, right? But to my surprise, I still have the same problem. The websites work fine when I open them (using actual domain name) on the server itself, but when I open them on machine outside network the first VH entry open for all the domains I open.
Can anyone please help me with this?
Thanks!
Using both Apache2.2 and Apache2.4 syntax gets Apache a litle confused.
So as I assume you are running Apache 2.4 change the VH defs to this
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www/testcase"
ServerName test.mydomain.com
<Directory "C:/wamp64/www/testcase">
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "C:/wamp64/www/test2"
ServerName test2.mydomain.com
<Directory "C:/wamp64/www/test2">
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
Why Apache opens the first site i.e. localhost in this case.
If Apache cannot make sense of a VH def, it ignores it and default to loading the first Virtual Host that was correctly defined in the httpd-vhosts.conf file.
Of course you will also need to amend your c:\windows\system32\driverrs\etc\hosts file to include these domain names
127.0.0.1 localhost
127.0.0.1 test.mydomain.com
127.0.0.1 test2.mydomain.com
::1 localhost
::1 test.mydomain.com
::1 test2.mydomain.com
C:\wamp\bin\apache\apache2.4.9:
<VirtualHost *:80>
DocumentRoot C:\wamp\wwww\sk\public
ServerName sk.localhost
SetEnv APPLICATION_ENV "development"
<Directory "C:\wamp\wwww\sk\public">
Options Indexes FollowSymLinks MultiViews
DirectoryIndex index.php
AllowOverride All
Order allow,deny
Allow from all
Require local
Allow from localhost ::1 127.0.0.1
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot C:\wamp\wwww\sk\public
ServerName sk.localhost
SetEnv APPLICATION_ENV "development"
<Directory "C:\wamp\wwww\sk\public">
Options Indexes FollowSymLinks MultiViews
DirectoryIndex index.php
AllowOverride All
Order allow,deny
Allow from all
Require local
Allow from localhost ::1 127.0.0.1
</Directory>
</VirtualHost>
Hosts file:
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
127.0.0.1 localhost
127.0.0.1 sk.localhost
When I try to access localhost or sk.localhost it gives me 403 error (Wamp is green and Online. Anyone can help please? I don`t know what am I doing wrong here. I tried several methods from Internet but with no luck. Any help would be much appreciated. Best regards, Bogdan.
PHPMyadmin is working.
This is probably because you are using 2 different versions of the access security syntax and Apache is getting confused.
Change your Virtual Host definitions as below to use just the Apache 2.4 syntax and not the Apache 2.2 ones.
Also you should create a VH for localhost as well, as when you implement Virtual Hosts, Apache ignores the definition of localhost in the httpd.conf file.
# Should be the first VHOST definition so that it is the default virtual host
# Also access rights should remain restricted to the local PC
# So that any random ip address attack will recieve an error code and not gain access
<VirtualHost *:80>
DocumentRoot "c:/wamp/www"
ServerName localhost
<Directory "c:/wamp/www">
AllowOverride All
Require local
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot C:\wamp\wwww\sk\public
ServerName sk.localhost
SetEnv APPLICATION_ENV "development"
<Directory "C:\wamp\wwww\sk\public">
Options Indexes FollowSymLinks MultiViews
DirectoryIndex index.php
AllowOverride All
Require local
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot C:\wamp\wwww\sk\public
ServerName sk.localhost
SetEnv APPLICATION_ENV "development"
<Directory "C:\wamp\wwww\sk\public">
Options Indexes FollowSymLinks MultiViews
DirectoryIndex index.php
AllowOverride All
Require local
</Directory>
</VirtualHost>
The Require local tells Apache to only allow access to a VH domain if the client is on the PC running WampServer(Apache).
If you actually want to allow access from say another PC on your local network, you can add a line like this to the domain you want to access
Require local
Require ip 192.168.1
Or if you want to allow access from anwhere replace those lines with
Require all granted
WARNING Dont allow access to the universe unless you really know what you are doing.
PS The WAMPserver Online/Offline feature only controls access and does not mean APache is running or not. Also once you implement Virtual Hosts it no longer has any relevance and shoudl be set OFFLINE as access control is now held in each individual Virtual Host.