Tell me how to add it using the sed command.
[Before revision]
BONDING_OPTS="mode=1 miimon=200 primary=ens192"
[After revision]
BONDING_OPTS="mode=1 miimon=200 primary=ens192 primary=eth0"
I have succeeded so far.
sed "/BOND/s/$/primary=eth0/g" /etc/sysconfig/network-scripts/ifcfg-bond0
Output:
BONDING_OPTS="mode=1 miimon=200 primary=ens192"primary=eth0
Thanks for adding your effort in your post. Could you please try following.
awk '/BOND/{sub(/\"$/," primary=eth0&")} 1' Input_file
In case you want to save output into Input_file itself then try:
awk '/BOND/{sub(/\"$/," primary=eth0&")} 1' Input_file > temp && mv temp Input_file
With sed:
sed '/BOND/s/\"$/ primary=eth0&/' Input_file
Please use either sed -i (to save output into Input_file itself) OR use sed -i.bak (to save output into Input_file itself taking a backup of existing Input_file).
sed '/BOND/s/"$/ primary=eth0"/'
use single quotes, string inside double quotes is subject to shell interpretation before it is passed to sed and that leads to mistakes often
See also: Difference between single and double quotes in Bash
since you need to insert before something at end of line, you need to add that condition before applying $ anchor - which is " in this case
In case you have a non-trivial string or regex before the anchor, you can use & to get back that matched string in replacement section instead of duplicating the text
sed '/BOND/s/"$/ primary=eth0&/' ip.txt
For in-place editing, see sed in-place flag that works both on Mac (BSD) and Linux
Related
I have got the following URL:
https://xcg5847#git.rz.bankenit.de/scm/smat/sma-mes-test.git
I need to pull out smat-mes-test and smat:
git config --local remote.origin.url|sed -n 's#.*/\([^.]*\)\.git#\1#p'
sma-mes-test
This works. But I also need the project name, which is smat
I am not really familiar to complex regex and sed, I was able to find the other command in another post here. Does anyone know how I am able to extract the smat value here?
With your shown samples please try following awk code. Simple explanation would be, setting field separator(s) as / and .git for all the lines and in main program printing 3rd last and 3nd last elements from the line.
your_git_command | awk -F'/|\\.git' '{print $(NF-2),$(NF-1)}'
Your sed is pretty close. You can just extend it to capture 2 values and print them:
git config --local remote.origin.url |
sed -E 's~.*/([^/]+)/([^.]+)\.git$~\1 \2~'
smat sma-mes-test
If you want to populate shell variable using these 2 values then use this read command in bash:
read v1 v2 < <(git config --local remote.origin.url |
sed -E 's~.*/([^/]+)/([^.]+)\.git$~\1 \2~')
# check variable values
declare -p v1 v2
declare -- v1="smat"
declare -- v2="sma-mes-test"
Using sed
$ sed -E 's#.*/([^/]*)/#\1 #' input_file
smat sma-mes-test.git
I would harness GNU AWK for this task following way, let file.txt content be
https://xcg5847#git.rz.bankenit.de/scm/smat/sma-mes-test.git
then
awk 'BEGIN{FS="/"}{sub(/\.git$/,"",$NF);print $(NF-1),$NF}' file.txt
gives output
smat sma-mes-test
Explanation: I instruct GNU AWK that field separator is slash character, then I replace .git (observe that . is escaped to mean literal dot) adjacent to end ($) in last field ($NF), then I print 2nd from end field ($(NF-1)) and last field ($NF), which are sheared by space, which is default output field separator, if you wish to use other character for that purpose set OFS (output field separator) in BEGIN. If you want to know more about NF then read 8 Powerful Awk Built-in Variables – FS, OFS, RS, ORS, NR, NF, FILENAME, FNR
(tested in gawk 4.2.1)
Why not sed 's!.*/\(.*/.*\)!\1!'?
string=$(config --local remote.origin.url | tail -c -21)
var1=$(echo "${string}" | cut -d'/' -f1)
var2=$(echo "${string}" | cut -d'/' -f2 | sed s'#\.git##')
If you have multiple urls with variable lengths, this will not work, but if you only have the one, it will.
var1=smat
var2=sma-mes-test.git
If I did have something variable, personally I would replace all of the forward slashes with carriage returns, throw them into a file, and then export the last and second last lines with ed, which would give me the two last segments of the url.
Regular expressions literally give me a migraine headache, but as long as I can get everything on its' own line, I can quite easily bypass the need for them entirely.
cat file1.txt | awk -F '{print $1 "|~|" $2 "|~|" $3}' > file2.txt
I am using above command to filter first three columns from file1 and put into file.
But only getting the column names and not the column data.
How to do that?
|~| - is the delimiter.
file1.txt has values as :
a|~|b|~|c|~|d|~|e
1|~|2|~|3|~|4|~|5
11|~|22|~|33|~|44|~|55
111|~|222|~|333|~|444|~|555
my expedted output is :
a|~|b|~|c
1|~|2|~|3
11|~|22|~|33
111|~|222|~|333
With your shown samples, please try following awk code. You need to set field separator to |~| and remove starting space from lines, then print the lines.
awk -F'\\|~\\|' -v OFS='|~|' '{sub(/^[[:blank:]]+/,"");print $1,$2,$3}' Input_file
In case you want to keep spaces(which was in initial post before edit) then try following:
awk -F'\\|~\\|' -v OFS='|~|' '{print $1,$2,$3}' Input_file
NOTE: Had a chat with user in room and got to know why this code was not working for user because of gunzip -c file was being used wrongly, its output was being saved into a variable on which user was running awk program, so correcting that command generated right file and awk program ran fine on it. Adding this as a reference for future readers.
One approach would be:
awk -v FS="," -v OFS="|~|" '{gsub(/[|][~][|]/,","); sub(/^\s*/,""); print $1,$2,$3}' file1.txt
The approach simply replaces all "|~|" with a "," setting the output file separator to "|~|". All leading whitespace is trimmed with sub().
Example Use/Output
With your data in file1.txt, you would have:
$ awk -v FS="," -v OFS="|~|" '{gsub(/[|][~][|]/,","); sub(/^\s*/,""); print $1,$2,$3}' file1.txt
a|~|b|~|c
1|~|2|~|3
11|~|22|~|33
111|~|222|~|333
Let me know if this is what you intended. You can simply redirect, e.g. > file2.txt to write to the second file.
For such cases, my bash+awk script rcut comes in handy:
rcut -Fd'|~|' -f-3 ip.txt
The -F option enables fixed string input delimiter (which is given using the -d option). And by default, the output field separator will also be same as -d when -F is active. -f-3 is similar to cut syntax to specify first three fields.
For better speed, use hck command:
hck -Ld'|~|' -D'|~|' -f-3 ip.txt
Here, -L enables literal field separator and -D specifies output field separator.
Another benefit is that hck supports -z option to automatically handle common compressed formats based on filename extension (adding this since OP had an issue with compressed input).
Another way:
sed 's/|~|/\t/g' file1.txt | awk '{print $1"|~|"$2"|~|"$3}' > file2.txt
First replace the |~| delimiter, and use the default awk separator, then print columns what you need.
I have a string in a dat file
Times-New $\Gamma$
and I want to replace it using sed or awk (I would prefer to use awk) utility with
/Symbol G
I could replace only one $ sign but failed for the remaining text.
So what I want is
sed 's/Times-New $\Gamma$/Symbol G/g' case.dat
Could you please help me?
Could you please try following, written and tested with shown samples. We need to escape \ and $ to make awk treat them as a literal character in program.
awk '{gsub(/Times-New \$\\Gamma\$/,"/Symbol G")} 1' Input_file
OR as per OP's comment try(Thanks to anubhava sir for adding solution):
awk '{gsub(/Times-New[ \t]+(G|\$\\Gamma\$)/, "/Symbol G")} 1' Input_file
With GNU sed try:
sed -E 's/Times-New \$\\Gamma\$/Symbol G/g' Input_file
I have a couple of hundreds of files which I want to process with xargs. They all need a fix of their first column.
Therefore I need an awk command to append the prefix "ID_" to the first column of a file (except for the first header line). Can anyone help me with this?
Something along the line:
gawk -f ';' "{$1='ID_' $1; print $0}" file.csv > file_processed.csv
I am not expert for the command, though. And I would rather like to have some inplace processing instead of making a copy of each file. Beforehand, I made it in VIM, but then I only had one file.
:%s/^-/ID_/
I hope someone can help me here.
gawk 'BEGIN{FS=";"; OFS=";"} {if(NR>1) $1="ID_"$1; print}' file.csv > file_processed.csv
FS and OFS set the input and output field separators, respectively.
NR>1 checks whether current line number is larger than 1, so we don't modify the header line.
You can also modify the file in place with -i inplace option:
gawk -i inplace 'BEGIN{FS=";"; OFS=";"} {if(NR>1) $1="ID_"$1; print}' file.csv
Edit
After elaborating the original question, here's the final version:
gawk -i inplace 'BEGIN{FS=OFS=";"} NR>1{sub(/^-/,"ID_",$2)} 1' file.csv
which substitutes - in the beginning of second column with ID_.
NR>1 action applies for all but first (header) line. 1 invokes the default default print action.
If you just want to do something, particularly adding a prefix, on the first field, it is not different from adding the prefix to the whole line.
So you can just awk '$0 = "ID_" $0' file.csv it should do the work. If you want to make it "change in place", you can:
awk '$0="ID_"$0' csv >/tmp/foo && mv /tmp/foo file.csv
You can also make use of sed:
sed -i 's/^/ID_/' file
The -i does "in-place modification"
You mentioned vim, and gave s/^-/ID_/ cmd, it doesn't add the prefix (ID_), it will replace the leading - by the ID_, they are different.
I would like to take the number after the - sign and put is as column 2 in my matrix. I know how to grep the string but not how to print it after the text string.
in:
1-967764 GGCTGGTCCGATGGTAGTGGGTTATCAGAACT
3-425354 GCATTGGTGGTTCAGTGGTAGAATTCTCGCC
4-376323 GGCTGGTCCGATGGTAGTGGGTTATCAGAAC
5-221398 GGAAGAGCACACGTCTGAACTCCAGTCACGTGAAAATCTCGTATGCCGTCT
6-180339 TCCCTGGTGGTCTAGTGGTTAGGATTCGGCGCT
out:
GGCTGGTCCGATGGTAGTGGGTTATCAGAACT 967764
GCATTGGTGGTTCAGTGGTAGAATTCTCGCC 425354
GGCTGGTCCGATGGTAGTGGGTTATCAGAAC 376323
GGAAGAGCACACGTCTGAACTCCAGTCACGTGAAAATCTCGTATGCCGTCT 221398
TCCCTGGTGGTCTAGTGGTTAGGATTCGGCGCT 180339
awk -F'[[:space:]-]+' '{print $3,$2}' file
Seems like a simple substitution should do the job:
sed -E 's/[0-9]+-([0-9]+)[[:space:]]*(.*)/\2 \1/' file
Capture the parts you're interested in and use them in the replacement.
Alternatively, using awk:
awk 'sub(/^[0-9]+-/, "") { print $2, $1 }' file
Remove the leading digits and - from the start of the line. When this is successful, sub returns true, so the action is performed, printing the second field, followed by the first.
Using regex ( +|-) as field separator:
$ awk -F"( +|-)" '{print $3,$2}' file
GGCTGGTCCGATGGTAGTGGGTTATCAGAACT 967764
GCATTGGTGGTTCAGTGGTAGAATTCTCGCC 425354
GGCTGGTCCGATGGTAGTGGGTTATCAGAAC 376323
GGAAGAGCACACGTCTGAACTCCAGTCACGTGAAAATCTCGTATGCCGTCT 221398
TCCCTGGTGGTCTAGTGGTTAGGATTCGGCGCT 180339
here is another awk
$ awk 'split($1,a,"-") {print $2,a[2]}' file
awk '{sub(/.-/,"");print $2,$1}' file
GGCTGGTCCGATGGTAGTGGGTTATCAGAACT 967764
GCATTGGTGGTTCAGTGGTAGAATTCTCGCC 425354
GGCTGGTCCGATGGTAGTGGGTTATCAGAAC 376323
GGAAGAGCACACGTCTGAACTCCAGTCACGTGAAAATCTCGTATGCCGTCT 221398
TCCCTGGTGGTCTAGTGGTTAGGATTCGGCGCT 180339