Have a fiscal quarter column, and I want to add a column that displays the previous quarter in the same row. I've done this successfully in tableau with logic like below.
IF RIGHT([current_qtr], 1) = "1"
THEN LEFT([current_qtr],2)+ STR(INT(MID([current_qtr], 3,2)) -1) +"Q4"
ELSE LEFT([current_qtr],5)+ STR(INT(RIGHT([current_qtr],1)) -1)
END
Example of expected output in snowflake
current_qtr
previous_qtr
other columns
FY21Q1
FY20Q4
etc
FY21Q2
FY21Q1
etc
When I try to do this in snowflake though I keep getting this "Numeric value '' is not recognized error instead. Any ideas how to fix? Below is what I attempted.
SELECT *,
CASE
WHEN SUBSTR(p.current_qtr,5,1) = 1
THEN SUBSTR(p.current_qtr,1,2) || TRY_CAST(SUBSTR(p.current_qtr,3,2) as INTEGER)-1 || 'Q4'
ELSE SUBSTR(p.current_qtr,5,1) || TRY_CAST(SUBSTR(p.current_qtr,3,2) as INTEGER)-1
End As prev_qtr
FROM table as p
This logic might look way better as a SQL UDF than as a big pile of strange SQL inside a query:
create or replace function prev_quarter_formatted(x string)
returns string
as
$$
(
select 'FY' || to_varchar(prev_q, '%y') || 'Q' || quarter(prev_q)
from (
select substr(x, 3,2) year
, (1+3*(substr(x, 6,1)::int-1)) q_to_month
, to_date(year||'-'||q_to_month||'-01', 'yy-mm-dd') as_date
, dateadd(month, -3, as_date) prev_q
)
)
$$
;
select prev_quarter_formatted('FY21Q1') a
;
Notice that for the logic I transformed the quarter into a date, subtracted 3 months, and formatted again.
There are some subtle differences in the syntax for casting. You can use your current CASE statement with some minor adjustments:
SELECT *,
CASE
WHEN SUBSTR(p.current_qtr,6,1) = '1'
THEN SUBSTR(p.current_qtr,1,2) || ((SUBSTR(p.current_qtr,3,2))::int - 1) || 'Q4'
ELSE SUBSTR(p.current_qtr,1,2) || SUBSTR(p.current_qtr,3,2) || (SUBSTR(p.current_qtr,3,2)::int-1)
END AS prev_qtr
FROM table1 as p
I was wondering about the possibility to count the null columns of row in SQL, I have a table Customer that has nullable values, simply I want a query that return an int of the number of null columns for certain row(certain customer).
This method assigns a 1 or 0 for null columns, and adds them all together. Hopefully you don't have too many nullable columns to add up here...
SELECT
((CASE WHEN col1 IS NULL THEN 1 ELSE 0 END)
+ (CASE WHEN col2 IS NULL THEN 1 ELSE 0 END)
+ (CASE WHEN col3 IS NULL THEN 1 ELSE 0 END)
...
...
+ (CASE WHEN col10 IS NULL THEN 1 ELSE 0 END)) AS sum_of_nulls
FROM table
WHERE Customer=some_cust_id
Note, you can also do this perhaps a little more syntactically cleanly with IF() if your RDBMS supports it.
SELECT
(IF(col1 IS NULL, 1, 0)
+ IF(col2 IS NULL, 1, 0)
+ IF(col3 IS NULL, 1, 0)
...
...
+ IF(col10 IS NULL, 1, 0)) AS sum_of_nulls
FROM table
WHERE Customer=some_cust_id
I tested this pattern against a table and it appears to work properly.
My answer builds on Michael Berkowski's answer, but to avoid having to type out hundreds of column names, what I did was this:
Step 1: Get a list of all of the columns in your table
SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'myTable';
Step 2: Paste the list in Notepad++ (any editor that supports regular expression replacement will work). Then use this replacement pattern
Search:
^(.*)$
Replace:
\(CASE WHEN \1 IS NULL THEN 1 ELSE 0 END\) +
Step 3: Prepend SELECT identityColumnName, and change the very last + to AS NullCount FROM myTable and optionally add an ORDER BY...
SELECT
identityColumnName,
(CASE WHEN column001 IS NULL THEN 1 ELSE 0 END) +
-- ...
(CASE WHEN column200 IS NULL THEN 1 ELSE 0 END) AS NullCount
FROM
myTable
ORDER BY
NullCount DESC
For ORACLE-DBMS only.
You can use the NVL2 function:
NVL2( string1, value_if_not_null, value_if_null )
Here is a select with a similiar approach as Michael Berkowski suggested:
SELECT (NVL2(col1, 0, 1)
+ NVL2(col2, 0, 1)
+ NVL2(col3, 0, 1)
...
...
+ NVL2(col10, 0, 1)
) AS sum_of_nulls
FROM table
WHERE Customer=some_cust_id
A more generic approach would be to write a PL/SQL-block and use dynamic SQL. You have to build a SELECT string with the NVL2 method from above for every column in the all_tab_columns of a specific table.
Unfortunately, in a standard SQL statement you will have to enter each column you want to test, to test all programatically you could use T-SQL. A word of warning though, ensure you are working with genuine NULLS, you can have blank stored values that the database will not recognise as a true NULL (I know this sounds strange).
You can avoid this by capturing the blank values and the NULLS in a statement like this:
CASE WHEN col1 & '' = '' THEN 1 ELSE 0 END
Or in some databases such as Oracle (not sure if there are any others) you would use:
CASE WHEN col1 || '' = '' THEN 1 ELSE 0 END
You don't state RDBMS. For SQL Server 2008...
SELECT CustomerId,
(SELECT COUNT(*) - COUNT(C)
FROM (VALUES(CAST(Col1 AS SQL_VARIANT)),
(Col2),
/*....*/
(Col9),
(Col10)) T(C)) AS NumberOfNulls
FROM Customer
Depending on what you want to do, and if you ignore mavens, and if you use SQL Server 2012, you could to it another way. .
The total number of candidate columns ("slots") must be known.
1. Select all the known "slots" column by column (they're known).
2. Unpivot that result to get a
table with one row per original column. This works because the null columns don't
unpivot, and you know all the column names.
3. Count(*) the result to get the number of non-nulls;
subtract from that to get your answer.
Like this, for 4 "seats" in a car
select 'empty seats' = 4 - count(*)
from
(
select carId, seat1,seat2,seat3,seat4 from cars where carId = #carId
) carSpec
unpivot (FieldValue FOR seat in ([seat1],[seat2],[seat3],[seat4])) AS results
This is useful if you may need to do more later than just count the number of non-null columns, as it gives you a way to manipulate the columns as a set too.
This will give you the number of columns which are not null. you can apply this appropriately
SELECT ISNULL(COUNT(col1),'') + ISNULL(COUNT(col2),'') +ISNULL(COUNT(col3),'')
FROM TABLENAME
WHERE ID=1
The below script gives you the NULL value count within a row i.e. how many columns do not have values.
{SELECT
*,
(SELECT COUNT(*)
FROM (VALUES (Tab.Col1)
,(Tab.Col2)
,(Tab.Col3)
,(Tab.Col4)) InnerTab(Col)
WHERE Col IS NULL) NullColumnCount
FROM (VALUES(1,2,3,4)
,(NULL,2,NULL,4)
,(1,NULL,NULL,NULL)) Tab(Col1,Col2,Col3,Col4) }
Just to demonstrate I am using an inline table in my example.
Try to cast or convert all column values to a common type it will help you to compare the column of different type.
I haven't tested it yet, but I'd try to do it using a PL\SQL function
CREATE OR REPLACE TYPE ANYARRAY AS TABLE OF ANYDATA
;
CREATE OR REPLACE Function COUNT_NULL
( ARR IN ANYARRAY )
RETURN number
IS
cnumber number ;
BEGIN
for i in 1 .. ARR.count loop
if ARR(i).column_value is null then
cnumber := cnumber + 1;
end if;
end loop;
RETURN cnumber;
EXCEPTION
WHEN OTHERS THEN
raise_application_error
(-20001,'An error was encountered - '
||SQLCODE||' -ERROR- '||SQLERRM);
END
;
Then use it in a select query like this
CREATE TABLE TEST (A NUMBER, B NUMBER, C NUMBER);
INSERT INTO TEST (NULL,NULL,NULL);
INSERT INTO TEST (1 ,NULL,NULL);
INSERT INTO TEST (1 ,2 ,NULL);
INSERT INTO TEST (1 ,2 ,3 );
SELECT ROWNUM,COUNT_NULL(A,B,C) AS NULL_COUNT FROM TEST;
Expected output
ROWNUM | NULL_COUNT
-------+-----------
1 | 3
2 | 2
3 | 1
4 | 0
This is how i tried
CREATE TABLE #temptablelocal (id int NOT NULL, column1 varchar(10) NULL, column2 varchar(10) NULL, column3 varchar(10) NULL, column4 varchar(10) NULL, column5 varchar(10) NULL, column6 varchar(10) NULL);
INSERT INTO #temptablelocal
VALUES (1,
NULL,
'a',
NULL,
'b',
NULL,
'c')
SELECT *
FROM #temptablelocal
WHERE id =1
SELECT count(1) countnull
FROM
(SELECT a.ID,
b.column_title,
column_val = CASE b.column_title
WHEN 'column1' THEN a.column1
WHEN 'column2' THEN a.column2
WHEN 'column3' THEN a.column3
WHEN 'column4' THEN a.column4
WHEN 'column5' THEN a.column5
WHEN 'column6' THEN a.column6
END
FROM
( SELECT id,
column1,
column2,
column3,
column4,
column5,
column6
FROM #temptablelocal
WHERE id =1 ) a
CROSS JOIN
( SELECT 'column1'
UNION ALL SELECT 'column2'
UNION ALL SELECT 'column3'
UNION ALL SELECT 'column4'
UNION ALL SELECT 'column5'
UNION ALL SELECT 'column6' ) b (column_title) ) AS pop WHERE column_val IS NULL
DROP TABLE #temptablelocal
Similary, but dynamically:
drop table if exists myschema.table_with_nulls;
create table myschema.table_with_nulls as
select
n1::integer,
n2::integer,
n3::integer,
n4::integer,
c1::character varying,
c2::character varying,
c3::character varying,
c4::character varying
from
(
values
(1,2,3,4,'a','b','c','d'),
(1,2,3,null,'a','b','c',null),
(1,2,null,null,'a','b',null,null),
(1,null,null,null,'a',null,null,null)
) as test_records(n1, n2, n3, n4, c1, c2, c3, c4);
drop function if exists myschema.count_nulls(varchar,varchar);
create function myschema.count_nulls(schemaname varchar, tablename varchar) returns void as
$BODY$
declare
calc varchar;
sqlstring varchar;
begin
select
array_to_string(array_agg('(' || trim(column_name) || ' is null)::integer'),' + ')
into
calc
from
information_schema.columns
where
table_schema in ('myschema')
and table_name in ('table_with_nulls');
sqlstring = 'create temp view count_nulls as select *, ' || calc || '::integer as count_nulls from myschema.table_with_nulls';
execute sqlstring;
return;
end;
$BODY$ LANGUAGE plpgsql STRICT;
select * from myschema.count_nulls('myschema'::varchar,'table_with_nulls'::varchar);
select
*
from
count_nulls;
Though I see that I didn't finish parametising the function.
My answer builds on Drew Chapin's answer, but with changes to get the result using a single script:
use <add_database_here>;
Declare #val Varchar(MAX);
Select #val = COALESCE(#val + str, str) From
(SELECT
'(CASE WHEN '+COLUMN_NAME+' IS NULL THEN 1 ELSE 0 END) +' str
FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = '<add table name here>'
) t1 -- getting column names and adding the case when to replace NULLs for zeros or ones
Select #val = SUBSTRING(#val,1,LEN(#val) - 1) -- removing trailling add sign
Select #val = 'SELECT <add_identity_column_here>, ' + #val + ' AS NullCount FROM <add table name here>' -- adding the 'select' for the column identity, the 'alias' for the null count column, and the 'from'
EXEC (#val) --executing the resulting sql
With ORACLE:
Number_of_columns - json_value( json_array( comma separated list of columns ), '$.size()' ) from your_table
json_array will build an array with only the non null columns and the json_query expression will give you the size of the array
There isn't a straightforward way of doing so like there would be with counting rows. Basically, you have to enumerate all the columns that might be null in one expression.
So for a table with possibly null columns a, b, c, you could do this:
SELECT key_column, COALESCE(a,0) + COALESCE(b,0) + COALESCE(c,0) null_col_count
FROM my_table
Hi i want to sort alphanumeric data in ascending order .
data like this :
1mac , apple , dom , 007bind , pcworld , 8basic , nothing.
But here I want the result such as :
apple, dom ,nothing, pcworld , 007bind , 1mac , 8basic
can anyone tell me the sql query to show such result.
Any help will be appreciated.
Thanks In Advance..
SELECT your_field FROM your_table ORDER BY (your_field + 0 <> 0 OR your_field = '0') ASC, your_field + 0, your_field
You have to check if your database vendor supports such a collation and set the collation accordingly.
http://www.collation-charts.org
E.g. oracle has http://www.collation-charts.org/oracle10g/ora10g.CL8MSWIN1251.GENERIC_BASELETTER.html
Here's one way to do it:
select col from sometable where left(col, 1) < '0' or left(col, 1) > '9' order by col
union all
select col from sometable where left(col, 1) >= '0' and left(col, 1) <= '9' order by col