I'm implementing an EventFiringWebDriver, respectively, a WebDriverEventListener, where I need data both from before and after particular events (e.g. beforeClickOn and afterClickOn). Since I wasn't able to find anything in the docs, I would like to know if a situtation can occur where a before event isn't immediately followed by its corresponding after event? Something like:
(beforeEventA, beforeEventB, afterEventA, ...)
So, can I rely on the invocation order of before and after?
As you are implementing WebDriverEventListeners interface this surely can happen based on how you define the implementing methods.
Let me give you an example, say you are performing a click event and in beforeClickOn method you tried to perform an operation such as refesh page, so the behaviour will go like this:
beforeOnClick->beforeRefresh->afterRefresh->afterOnClick
As now you can see that the behaviour is totally dependent on how you want your driver to perform the task.
Hope this helped.
Related
In our company, repository objects must be created with original language EN.
Is there a way to check the logon language in case of creating a new object in the ABAP repository?
Desired behaviour:
SE80 - Create program/class/data element/table/....
==> user exit/badi checks the logon language. When it is not 'EN', the creation will be refused.
regards,
Umar Abdullah
I know there is a exit for this but I haven't remember exact name. You can use general purpose for finding exit. Go to SE24 and open CL_EXITHANDLER class, find GET_INSTANCE method and add break point. Then start creating item, it will pause on debugger multiple times, try to find suitable one.
As #mkysoft suggested, you may implement a check in the BAdI CTS_REQUEST_CHECK, method CHECK_BEFORE_ADD_OBJECTS, which is invoked when the object is about to be attached to a transport request. Raise the exception CANCEL to make the attachment fail (and so the object is not created too).
EDIT: sorry, ignore my answer, "this method is NOT released for Customer usage" as said in note 2150125 - Method CHECK_BEFORE_ADD_OBJECTS not triggered
DISCLAIMER: THE METHOD DESCRIBED HERE IS ABSOLUTELY NOT RECOMMENDED.
As correctly pointed out by the other members there is no standard and customer-exposed method to achieve your requirement, but if you absolutely must enable this check during creation you can use the below method. As well as the previously offered to you, it also involves modification of SAP standard.
There is a system BAdi CTS_TADIR_SUBSCREEN that is located inside enhancement point CTS_ES_TADIR_POPUP. They are SAP internal and not released for customer usage, so do this at your own risk.
Implementation procedure:
Step 0. First thing you need to change is a SAP internal usage flag, for which you need Object Access key which can be obtained from SAP or from SAP partner that made the implementation in your org. In virgin state this BAdi throws the error if you try to implement it
So hereinafter we assume that you already ticked off this checkbox in BAdi settings
Step 1.
In order to implement the BAdi one need to implement enhancement spot prior to that. This is the most complicated part, because despite we disabled internality flag the SAP-namespaced enhancements must be stored only in SAP-namespaced objects. By SAP namespace I mean non-Z, non-Y and non-T (Test). This means to implement this enhancement, besides modifying the enhancement definition, one need to create, for example, CTS_ES_TADIR named enh.impl., and save it to non-Z package, which you also need to create. Your enhancement implementations selector should look somehow like this
On the above screen only the second will work, all the rest Z will not.
Every non-Z object need Object Access Key, remember? Too bad. But just to show the proof-of-concept, I will proceed.
Step 2. After you created the enh. implementation in SAP-namespace it will propose you to create the BAdi implementation. The same principle applies here: only SAP-namespaced container for SAP-namespaced objects, hence CTS_TADIR_SUBSCREEN should have implementing class for example CL_TADIR_SUBSCREEN. During the creation of enhancement you will see many warnings
but finally you should have something like this, where all system-named objects are created and the enhancement/BAdi is activated.
Step 3. In order to get the BAdi working we need to enable this subscreen processing
during the playing with enhancement I found out that BAdi class is not being triggered standalone, without screen events not enhanced, so to make it work you need to touch a screen enhancement for screen 100
If you do not wanna modify screen elements logic, just put the dummy enhancement in SHOW_TADIR dialog module in the end of the include LSTRDO18
PROCESS BEFORE OUTPUT.
MODULE SHOW_TADIR. "<-- create the dummy enhancement here
CALL SUBSCREEN subs_info INCLUDING gv_badi_prog gv_badi_dynnr.
for example declaration statement like I did
Step 4. Activate your created BAdi class and put the necessary logic there. I wasn't able to trigger method GET_DATA_FROM_SCREEN, but PUT_DATA_TO_SCREEN worked fine
If we put this simple processing for your requirement
METHOD cts_if_tadir_subscreen~get_data_from_screen.
IF object_data-l_mstlang <> 'E'.
MESSAGE 'Objects in non-English languages are not allowed!' TYPE 'A'.
ENDIF.
ENDMETHOD.
it will not allow creating objects in languages other than English.
The check in method get_data_from_screen is being done before showing the screen so language is determined from system logon settings. If to play more with this BAdi, I suppose the method GET_DATA_FROM_SCREEN can also be enabled, which will make it possible to check user input, i.e. the case when the user gonna change the default language.
I got a partial answer here but not exactly what I wanted.
The link describes how to get a list of task futures but what I'd really like to be able to do is list out and cancel individual jobs (that might be hung, long running etc etc). I've seen another post implying that this is not possible but I'd like to confirm (see second link)
Thanks
http://apache-ignite-users.70518.x6.nabble.com/How-can-I-obtain-a-list-of-executing-jobs-on-an-ignite-node-td8841.html
http://apache-ignite-users.70518.x6.nabble.com/Cancel-tasks-on-Ignite-compute-grid-worker-nodes-td5027.html
Yes, this is not possible and actually I'm not sure how this can be done in general case. Imagine there are 5 jobs running and you want to cancel one of them. How are you going to identify it? It seems to be very use case specific to me.
However, you can always implement your own mechanism to do this. One of the possible ways is to use ComputeTaskSession API and task attributes. E.g., set a special attribute that will act as signal for job cancellation and create attribute listener that will stop job execution accordingly.
I am studying interface design.
Here is what I curious about.
Some of open API support 2 different interfaces to implement toggling. i.e. instagram like interface. It separates like interface(like, cancel like)
What is the advantage of separate those two.(separating into two interfaces makes end-user more complicated in my view)
I question this, since it could be implemented with toggle.
i.e. user send item_id and user_id. server check database(this item is already liked or not), and update.
Thanks for answer!
The real benefit to having two interfaces for toggling is that it doesn't require the user to know the current state of the thing they are attempting to change (i.e. it doesn't require me to first query for the state).
If I am a consumer of an API, typically I will want to perform actions such as like-ing something. Very rarely can I think of a case where I would want to perform the action of do the opposite of what I did previously (unless I'm feeling like flip-flopping). If you didn't have two endpoints for like and unlike then you'd first have to poll the API to get the current status, and then perform the toggle that you're talking about if needed.
This situation introduces more logic into your code, requires that you make 1-2 calls to the API, and assumes that the state didn't change between calls; whereas having two endpoints reduces the logic, limits your API calls to 1 per action, and you don't have to worry about the state changing unexpectedly.
In the case where you try to like something that the user has already liked, then the API would simply return a successful result and not alter the underlying data.
One reason to prefer an interface where you specify the desired state explicitly is that it will be idempotent. That is, the resulting state is the same even if the request is made multiple times.
This is a pretty contrived example, but if two different people sharing the same account tried to like the same thing within a small enough window, you could end up with it being un-liked instead.
We are working on a portal environment. On one of our page we have two portlets. When some action happens on one portlet, we have to minimize the other portlet and viceversa.
So we feel that this is a suitable situation where we can use Dojo's publish/subscribe model. But I'm a bit confused if I need to use different topics [One when some action happens on Portlet A, and the second topic when some action occurs on PortletB] or one topic [something like minimize]. Can someone please guide me.
This is really up to you, and depends on your needs.
Topics are free-form texts, so you can arrange it in any text format you like.
My own experiences have been to treat a topic as an "event". Therefore, one topic, one event.
My experience has also been that it is tremendous beneficial to implement "commands" in the same system as events -- so you have a universal command/event system.
Events (therefore topics) do not have to correspond to your portlets. For instance, one portlet can have multiple events (if they make sense), or one event can be shared by multiple portlets (for shared functionalities or for cross-portlet communcations).
Parameters and data can be passed with the event (i.e. topic) as arguments.
Now, a good trick I've learnt is to have "sub-topics" -- i.e. topics that are prefixed with an parent topic, when things want to subscribe to a particular instance of event.
Example: Assume we have an event called "/portlets/showhide" which is published by any portlet when it is shown or hidden, together with the id of the portlet and a boolean variable indicating whether it is shown or hidden.
Now, assume that a portlet will also publish topics called "/portlets/showhide/{id}" (with true/false argument) and "/portlets/showhide/{id}/show" (no arguments) when shown, together with the generic "/portlets/showhide" topic (event).
Now assume some handler object is really only interested when the "xyz" portlet is hidden. It doesn't have to subscribe to "/portlets/showhide" and listen to all those events of other portlets that it is not interested in. It can simply subscribe to "/portlets/showhide/xyz/hide". When number of subscriptions increase in a large system, this kind of optimizations can come in quite handy.
You can use one topic in which pass additional parameters. Something like this:
// PortletA
dojo.publish("onPortletAction", [{sender: "PortletA"}]);
// PortletB
dojo.publish("onPortletAction", [{sender: "PortletB"}]);
....
dojo.subscribe("onPortletAction", dojo.hitch(window, window.processAction));
window.processAction = function(data) {
if (data.sender == "PortletA"){
//to do something
}
if (data.sender == "PortletB") {
//to do something
}
}
I'm working on a small application using C++/wxWidgets, where several parts of the GUI need to be updated based on e.g. received UDP datagrams. More specifically, a secondary thread tries to keep a list of available "clients" in the network (which may come and go away) and e.g. corresponding comboboxes in the UI need to be updated to reflect the changes.
The documentation mentions that for this kind of thing EVT_UPDATE_UI would be a good choice. As far as I can understand from the sparse documentation, this event is sent automatically by the system and provides some support for assisted UI change.
However, I'd feel more comfortable using a more direct approach, i.e. where e.g. a window object could register/subscribe to receive notifications (either events or callbacks) upon particular events and another part of the code is sending out these notifications when required. I could do this in C++ using my own code, however I guess if wxWidgets already supports something like that, I should make use of it. However I haven't found anything in that regards.
So, the question is: does wxWidgets support this kind of notification system (or similar alternatives) or would I be best served coding my own?
AFAIK there is nothing directly usable in wxWidgets, but doing it on your own seems easy.
What I would do:
Create a wxEvtHandler-descendent class to hold the list of available "clients" in the network. Let this class have a wxCriticalSection, and use a wxCriticalSectionLocker for that in all methods that add or delete "clients".
Create a worker thread class by inheriting wxThread to handle your UDP datagrams, using blocking calls. The thread should directly call methods of the client list object whenever a client has to be added or removed. In these methods update the list of clients, and ::wxPostEvent() an event to itself (this will execute the whole notification calls in the main GUI thread).
Handle the event in the client list class, and notify all listeners that the list of clients has changed. The observer pattern seems to me a good fit. You could either call a method of all registered listeners directly, or send a wxCommandEvent to them.
Have you tried calling Update() on the widget(s) that change? Once you update the contents of the combo box, call Update(), and the contents should update.