I want to start SQL Server 2017 Express and enter the command
"D:\Microsoft SQL Server\MSSQL14.SQLEXPRESS\MSSQL\Binn\sqlservr.exe" -sSQLEXPRESS
The following error message appeared. How to solve the problem?
2018-11-28 10:06:25.72 spid5s Uploading data collector package from disk: d:\Microsoft SQL Server\MSSQL14.SQLEXPRESS\MSSQL\Install\SqlTraceCollect.dtsx
2018-11-28 10:06:25.72 spid5s Uploading data collector package from disk: d:\Microsoft SQL Server\MSSQL14.SQLEXPRESS\MSSQL\Install\SqlTraceCollect.dtsx
2018-11-28 10:06:25.72 spid5s Error: 2775, Severity: 17, State: 12.
2018-11-28 10:06:25.72 spid5s The code page 65001 is not supported by the server.
2018-11-28 10:06:25.74 spid5s Error: 912, Severity: 21, State: 2.
2018-11-28 10:06:25.74 spid5s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 200, state 7, severity 25. This is a serious error condition which might interfere with regular operation and the database will be taken offline. If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script upgrade steps run to completion.
2018-11-28 10:06:25.74 spid5s Error: 3417, Severity: 21, State: 3.
2018-11-28 10:06:25.74 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
2018-11-28 10:06:25.74 spid5s SQL Server shutdown has been initiated
2018-11-28 10:06:25.74 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Try this:
control panel > Region and Time
and try as u see in this:
Related
I am getting below error while execute SSIS Package with SQL Server Agent. I have use administrator account(proxy) to execute this job.
SSIS Package contain data flow task. I have used ODBC connection as data source and OLEDB connection for data destination.
Data Souce :- AS400 JDE system & Data Destination - SQL Server 2019
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on ODBC Source returned error code 0x80004005. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.There may be error messages posted before this with more information about the failure.End Error DTExec: The package execution returned DTSER_FAILURE (1)
`
Here is the SSIS Log.
Here the some more details.
• SQL Edition: 2019 Enterprise
• OS: Windows 2019 server edition
Issue description:
• I have SSIS Package which connect to JD Edwards database via ODBC Connection
• I have Scheduled SQL Job and one of the step is using above package to load data form JD Edwards
• The job step throw error during execution. Below is the detail description of the error
Executed as user: {DomainName}{UserName}. Microsoft (R) SQL Server Execute Package Utility Version 15.0.2000.5 for 32-bit Copyright (C) 2019 Microsoft. All rights reserved. Started: 12:39:40 PM Error: 2020-06-11 12:40:02.18 Code: 0xC0047038 Source: Data Flow Task SSIS.Pipeline Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on ODBC Source returned error code 0x80004005. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:39:40 PM Finished: 12:40:02 PM Elapsed: 21.969 seconds. The package execution failed. The step failed.
'
Can Anyone Help in this ?
That log you're looking at must be incomplete. To get all error messages:
USE SSISDB
SELECT * FROM catalog.executions WHERE package_name LIKE 'NameOfYourPackage'
Copy the execution_id of the relevant execution (look at dates and times)
SELECT * FROM catalog.event_messages WHERE operation_id=[execution_id from previous query] AND message_type>110
I want to install Data Quality Server In existing Instance SQL Server. After entered Master key I'm getting error like in below log messages
My OS
Windows 2012 R2 Standard and SQL Server 2012
[8/12/2019 11:58:39 PM] Executing action: Create data quality schema.
[8/12/2019 11:58:39 PM] Script: 'recreate_schema.bat WINDMPSMLMCJBK\SQL2012 DQS SQL_Latin1_General_CP1_CI_AS'
[8/12/2019 11:58:39 PM] Failed to create script process.
System.ComponentModel.Win32Exception (0x80004005): Access is denied
at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.Ssdqs.DqsInstaller.Logic.Actions.ScriptExecuterAction.ExecuteScript(String script, Object[] args)
[8/12/2019 11:58:39 PM] Action 'Create data quality schema' finished with errors, aborting installation.
How to fix the the error? thanks before
I tried upgrading SonarQube from 5.1.2 to 5.2, but the Upgrade failed. I have the following message in the Sonar.log:
2015.11.23 07:44:36 ERROR web[o.s.s.d.m.PlatformDatabaseMigration] DB Migration or container restart failed. Process ended with an exception
org.jruby.exceptions.RaiseException: (StandardError) An error has occurred, this and all later migrations canceled:
ActiveRecord::JDBCError: Cannot find the object "project_links" because it does not exist or you do not have permissions.: ALTER TABLE project_links ADD [component_uuid] NVARCHAR(50)
2015.11.23 08:03:50 INFO app[o.s.p.m.TerminatorThread] Process[web] is stopping
2015.11.23 08:03:51 INFO web[o.s.p.StopWatcher] Stopping process
2015.11.23 08:03:51 INFO web[o.a.c.h.Http11NioProtocol] Pausing ProtocolHandler ["http-nio-0.0.0.0-9000"]
2015.11.23 08:03:52 INFO web[o.a.c.h.Http11NioProtocol] Stopping ProtocolHandler ["http-nio-0.0.0.0-9000"]
2015.11.23 08:03:53 INFO web[o.a.c.h.Http11NioProtocol] Destroying ProtocolHandler ["http-nio-0.0.0.0-9000"]
2015.11.23 08:03:53 INFO web[o.s.s.a.TomcatAccessLog] Web server is stopped
When I execute the failed ALTER TABLE command in SQL Server Management Studio, it does work. I was able to connect to the sonar database with Visual Studio with the user/password that SonarQube uses. I gave the sonar user schema owner and read and write permissions. I tried changeing from the encrypted password to the clear text password. What could be wrong?
The DB user has permissions to read multiple SonarQube schemas. It must be restricted to a single schema.
I've been fighting this for a while now, and tried many things, I am finally overwhelmed.
I had many SSIS packages in SQL Server 2008 working perfectly, bringing data from SQL, MySQL and Oracle. Then I decided to upgrade to SQL 2012 and the packages won't run. I created them all again using VS2010 and they run great from SSIS, but the ones that connect to Oracle do not work. After several errors, I got this:
Executed as user: Domain\UserName. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 12:00:00 PM Error: 2014-03-01 12:00:04.25 Code: 0xC0208449 Source: SalesBacklog ADO NET Source [2] Description: ADO NET Source has failed to acquire the connection {01F532A5-4542-4833-9103-5FCAEC4EA4A2} with the following error message: "Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.". End Error Error: 2014-03-01 12:00:04.25 Code: 0xC0047017 Source: SalesBacklog SSIS.Pipeline Description: ADO NET Source failed validation and returned error code 0xC0208449. End Error Error: 2014-03-01 12:00:04.25 Code: 0xC004700C Source: SalesBacklog SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-03-01 12:00:04.25 Code: 0xC0024107 Source: SalesBacklog Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:00:00 PM Finished: 12:00:04 PM Elapsed: 3.297 seconds. The package execution failed. The step failed.
My new server specs are:
Platform: NT64
System: Xeon L5520 2.27GHz (16 proc), 66.1GB RAM
OS: Windows Server 2012
DB: SQL Server 2012 - 11.0.2100
I've installed, uninstalled, over and over, in different order, the Oracle 32 and 64 Clients. But no luck.
Lately I strongly believe that my problem might be related to permissions of the SQL Agent to run the package and not a problem with the Oracle Clients. I tried all types of authentications (which are quite confusing at times) and I get another wide arrange of errors.
Is anyone out there with any idea of how should I go about it? I am starting from scratch and I will try every step, all over again. If I find the issue, I'll keep you posted.
Thank you!
After much effort, #billinkc told me all I needed to know: check box for 32bit mode
Open the SQL Agent Job
On the "Steps" section, select the step that executes the SSIS Package that connects to Oracle
Under the "Execution options" tab, check the check box "Use 32bit runtime"
This time though I made sure to deinstall all Oracle Clients and just install the 32bit Oracle Client.
Hi I am new to this SQL CLR. I have created a SQL CLR project and complies without any errors. When I try to deploy the code I am getting this below error,
.....\bin\Debug\xxx.sql(85-85): Deploy error SQL01268: .Net SqlClient Data Provider: Msg 701, Level 17, State 11, Line 1 There is insufficient system memory in resource pool 'internal' to run this query.An error occurred while the batch was being executed.
I have Microsoft SQL Server 2008 R2 (SP2) - 10.50.4276.0 (X64) version.
Also when I run the SQL profiler when I deploy this code this deployment stops after this long line of code
CREATE ASSEMBLY [solaceVHI]
AUTHORIZATION [dbo]
FROM 0x4D5A9000030000000400.... 037D0E0100042A1E027B0F0100042A2.... E4A007A0303C2000000008608550E3C...
53716C436F6E746578740053716C5069....
WITH PERMISSION_SET = UNSAFE;
I have enough memory on my SQL server.
The event virewer error log says ... "There is insufficient system memory in resource pool 'internal' to run this query".