I am hitting a rest API using HTTP GET request that contains authentication token in header. So in a thread group i am hitting authentication server to get authentication token. In the subsequent thread groups i am going for HTTP GET request
TEST plan (property auth)
ThreadGroup(authentication)
http GET to get authentication token
extracting response and putting in auth
Thread group(GET)
http GET
Thread group(GET)
http GET
and soo on
Here the authentication token will expire for every 25 min so i need a mechanism to generate authentication token for every 25 min with out interrupting the work of on going HTTP GET calls
You can go through the below screenshots for more details. Let me know in case you still need more help on this.
Use Beanshell Assertion to store variable into Property variable
Use the property variable in this way to fetch the value
Just add Test Action sampler (since JMeter 5.0 the element is known as Flow Action Control) after your http GET to get authentication token request and configure it to Pause for 1500000 milliseconds (25 minutes * 60 seconds in minute * 1000 milliseconds in second)
You can configure it in the below manner.
ThreadGroup(authentication)
http GET to get authentication token
Extract the authentication token and save in a jmeter property variable
The benefit of saving token in a property variable is that you can access property variable in other thread groups as well. Once configured in the above manner, you can execute the ThreadGroup(authentication) after every 23 minutes so that it can update the Jmeter property variable (authentication token) before expiring.
To set a property variable: ${__setProperty(variable, ${variable})}
To access a property variable: ${__property(variable)}
You can try this at your end and let me know how it goes.
Related
In HTTP Request, I gave login credentials then login got success, access_token generated.
Then by using JSON Extractor, I extracted the access_token and name as "auth_token".
Then in Beanshell Assertion, I added script "${__setProperty(auth_token, ${auth_token})};"
Then in HTTP Request Defaults, I added Parameter "Authorization" "${__property(auth_token)}" (in Test Plan level)
I cannot fetch that token in Thread_group-2, which is generated in Thread_group-1.
suggestions, please??
You need to ensure that the Thread Group which extracts the token is executed before the Thread Group which uses the token, either tick "Run Thread Groups consecutively" on Test Plan level:
or switch to setUp Thread Group which is being executed before all "main" Thread Groups
In general you should not be passing values between Thread Groups as thread group represents a logical group of business users and authentication/authorization is an integral part of the business flow so my expectation is that you need to have authentication and other actions in the single Thread Group. If you want to perform authentication only once - put it under Once Only Controller
Using Beanshell is kind of a performance anti-pattern, consider moving to JSR223 Test Elements instead.
I also have doubts regarding correctness of your token usage, I think you should rather use HTTP Header Manager instead and configure it to pass Authorization header with the value of Bearer followed by whitespace followed by your token
My Test structure in Jmeter
Thread group (2 users)
Http request
Listener
For each iteration same form_key values are getting in response which should not be.
How to get unique form_key in response for each iteration
Jmeter Test result screenshot
I cannot reproduce your issue using one of the online Magento demo instances, in particular this one: http://demo-acm-2.bird.eu/customer/account/login/
As you can see, each time form_key is different for each user for each iteration.
If you're using HTTP Cookie Manager - make sure to tick "Clear cookies each iteration" box
Also make sure to properly setup the HTTP Request sampler, to wit put http or https into "Protocol", server name or IP to the relevant field, path, etc.
I'm trying to learn J-Meter.
When I'm running a sample script of logging into a site using both valid/invalid credentials,it doesn't stop thread execution when invalid login credential is used and also login is not recorded in database.
Does it actually login to the website or only creates virtual login to create a similar environment.Is there any way to achieve this using Samplers?
JMeter is/acts as a headless browser.
Whatever your browser with an UI does, JMeter can also do - except executing a javascript. So, If you had recorded your script correctly - JMeter can login to the actual application as well.
Jmeter is not like QTP/Selenium. It does not know if it is a valid credential/invalid credential. It passes/fails the request based on the HTTP codes. If the HTML response from the server comes with a 200 http code, It passed for JMeter. If the server responds with code 500, JMeter fails the request. But JMeter also provides a way to validate the response you get - Assertion. You can use Response Assertion to see if you are seeing the home page or not to confirm if the user has logged in successfully.
To stop the test on error, select the appropriate option here in thread Group properties.
JMeter is a very nice tool & have been using it for 2 years with no issues.
Good luck!
Does your script have Config Element -> HTTP Cookie Manager? It needs cookie for the login function.
If your script has many transactions with the same level with login transaction and the option you select in your Thread Group is Continue, all transactions will be executed no matter login transaction is passed or failed.
In case you want the other transactions will not be executed if login fails, let add a Regular Expression Extractor as child of the login transaction to retrieve the text Dashboard, put other transactions into a Logic Controller -> If Controller. Suppose the Regular Expression Extractor has name Dashboard and Default value is NotFound, then the Condition of If Controller will be "${Dashboard}"!="NotFound"
JMeter automatically treats 2xx and 3xx HTTP Response Codes successful so it won't be able to detect failed login unless you explicitly tell it to check presence or absence of some specific content in the response data.
So if you add a Response Assertion you will be able to conditionally fail sampler and choose what to do in case of failure via "Action to be taken after a Sampler error" on Thread Group level.
See How to Use JMeter Assertions in Three Easy Steps guide for more details on the assertions domain.
If you're unsure what JMeter Sampler is doing you can check request and response details via View Results Tree listener. If you cannot simulate login event in majority of cases it is due to missing HTTP Cookie Manager and/or failed correlation of dynamic mandatory parameter(s) like Viewstate, CSRF token, etc.
So basically I need to extract an auth token from header response of 1st http request and then use the extracted data in 2nd (and all the following) http requests cookies.
The issue here is, that I have cookie manager set for the whole controller and instead of getting actual data I get the name of variable in my cookie ".authToken=${auth}".
I am guessing the reason is that the variable is not declared when the test reaches Cookie manager, but I would expect jmeter to be smart enough to declare the variable when it gets to the regular expression extractor.
Structure
Thread
Cache Manager
Cookie Manager (Cookie Policy:compatibility; Implementation:HC3)
Controller
Http Request
Regular expression extractor
Http request (I need to use value extracted above in Request Cookie here)
Http request (I need to use the same value in Request Cookie here)
Http request (I need to use the same value in Request Cookie here)
.....
Details:
All the http requests are recorded with implementation HttpClient3.1
Pretty sure I have everything configured correctly as in variable names, regular expression since it works in a very specific case:
The only time it seemed to work correctly was when I had Cookie manager inside the http request and disabled the 'main' Cookie manager (the one for the whole controller). Then it got extracted correctly, but that would be really silly workaround for such a basic requirement and also I have many http requests (over 100) where I need to use the extracted value.
Jmeter doesn't need to use the variable before it's declared by the regular expression extractor, I made sure that the domain is correct and it gets used for the first time after it should have been extracted.
Another workaround I thought of would be having separate threads, have them linked and send the variable in between them, launching the next one once the data gets extracted, but that seems a little bit too drastic.
What I tried:
Splitting http requests into 2 different controllers and using 2 different Cookie managers - got "${auth}" instead of some value
Defining user variable above controller and then using "Apply to: Jmeter Variable" option - again got just string "${auth}" instead of some value.
Moving the Cookie manager to a position after the http request which is used for the extraction - again "${auth}" instead of some value
Setting different cookie's policy (not all of them, but few)
Setting "CookieManager.save.cookies=true" in jmeter.properties (and still have on true)
Any help/ideas are appreciated. I have been trying to figure this out for about an hour and I think I must be missing something very simple.
Alright, finally got this resolved after roughly 2 hours.
Thanks to this article, I was able to do what I needed
https://capacitas.wordpress.com/2013/06/11/thats-the-way-the-cookie-crumbles-jmeter-style-part-2/
In nutshell: You need to use beanshell pre-processor and add the cookie manually
Here is the beanshell script in case the site dies:
import org.apache.jmeter.protocol.http.control.CookieManager;
import org.apache.jmeter.protocol.http.control.Cookie;
CookieManager manager = sampler.getCookieManager();
Cookie cookie = new Cookie("CookieName", vars.get("YourExtractedVariable"), "Domain", "Path", false, 0);
manager.add(cookie);
CONTEXT:
I have an Ember.js 1.1.0-beta.1 application that exchanges JSON data with a Rails-API server (Rails 4). JSON data exchange is accomplished with Ember-Data 1.0.0-beta.2 and Active Model Serializers 0.8.1 (AMS). I'm using the default recommended configurations for both Ember-Data and AMS, and am compliant with the JSON-API spec.
On any given RESTful call, the client passes the current authentication token to the server. The authentication token is verified and retired, and a new authentication token is generated and sent back to the client. Thus, every RESTful call accepts an authentication token in the request, and provides a new authentication token in the response that the client can cache and use for the next RESTful call.
QUESTION:
Where do I put the authentication token in each request and response?
Should it be part of each object's JSON in request and response? If so, where is the token placed in the existing object's JSON structure (which has nothing to do with authentication)?
Or should they be placed in the HTTP header for each request and response object?
What is "The Ember Way" that one might eventually expect to find in the new Ember Guides Cookbook?
MORE CONTEXT:
I'm already familiar with the following links:
#machty 2 Embercasts: http://www.embercasts.com/episodes/client-side-authentication-part-2
#wycats tweet: https://twitter.com/wycats/status/376495062709854209
#cavneb 3 blog posts: http://coderberry.me/blog/2013/07/08/authentication-with-emberjs-part-1
#simplabs blog post: http://log.simplabs.com/post/53016599611/authentication-in-ember-js
...and am looking for answers that go beyond these, and are specific to Ember-Data + AMS.
With the exception of the need to pass a new token back to the client in the response via Ember-Data, assume my client code is otherwise similar to the #machty Embercast example on GitHub: https://github.com/embercasts/authentication-part-2/blob/master/public/js/app.js
Thank you very much!
I've got a similar stack - ember, ember-data and rails-api with AMS. Right now, I'm just passing the authentication token (which I store in localStorage) in a header (though you could pass it on the query string) by modifying the RESTAdapter's ajax method.
My initial thought would be to avoid resetting the token on every request. If you're particularly concerned about the token being sniffed, it might be easier to just reset the token on the server at a regular interval (say, 10 minutes). Then, if any request from the client fails due to an old token, just fetch the new token (by passing a'reset token' that your server gives you at login) and replay the initial request.
As for where to put the token, there isn't really an "Ember Way" - I prefer passing it in a header since passing it in the query string can mess with caching and is also more likely to be logged somewhere along the way. I'd definitely avoid passing it in the request body - that would go against what ember-data expects, I'd imagine.
I have built something similar, although I do not reset the token unless the user signs out.
I would not put it in the request body itself - you are just going to pollute your models. There probably is no Ember way since this is more of a transport issue. I pass the token using a custom HTTP header and/or a cookie. The cookie is needed to authorize file downloads, which can not be done through ajax, although the cookie works for ajax calls too. In your case I would use a cookie and have the server set it to the new value each time. However, your scheme of resetting the token on each JSON request is not going to work on simultaneous requests. Is this really necessary? If you use TLS you probably don't need to worry so much. You could also timeout the token so that if there are no requests for 10 minutes a new token is generated.