I purchased a fancy little "visual menu maker" over at envato (Code Canyon) from here: https://codecanyon.net/item/z-menu-maker-drop-down-and-mega-menu/9240528
I was using their sample app where you can test out the tool and I was able to create a nice little menu for my site. But you have to purchase a license to export the code.
I purchased the license and the first "Getting Started" requirement is to "Start your Web Server and open the index.html file. This is where I'm lost. BTW... for reference, you can scroll to the bottom of that documentation page to see all the files that were included in the download.
When I try to open that "index.html" file in my browser, it doesn't load.
I followed some instructions to get my native Mac Apache server running, and everything seems to be working, with my localhost, but I don't know how to open this file through my Apache Web Server.
Any help would be so appreciated!!
I am assuming you have your Apache installed on your Mac under /etc/apache2 folder
If you want to serve your html files and related components, you need to tell apache from where to find your files
So , you need to configure apache so that it can server your files.
first you need to open an terminal from lunch menu then go to the apache2 installation directory
cd /etc/apache2
Then you need to open httpd.conf file and make necessary changes,
sudo nano /etc/apache2/httpd.conf
You will see "DocumentRoot" line/. Change it with your directory where you put your files.
Change also Directory path with yours. (It should be in same config file such as
with
<Document "some_path">
Then you should restart apache server with command
sudo apachectl restart
Now you can try to access your file . you can also check http://localhost to validate
You need to put the files somewhere within the DocumentRoot of your Apache web server, and then you should be able to visit them with http://localhost/ (assuming the index.html file is in the root of the DocumentRoot).
I'm not familiar with the default setting of DocumentRoot on the Mac port of Apache, but you should be able to find that quite easily in the configuration. On Linux that would commonly be found somewhere under /etc/apache2 or /etc/httpd.
There may be further configuration needed if the files expect some sort of server-side module to be activated (e.g. PHP), but it sounds like they are just plain HTML.
Some good answers were given but I think this particular app needed a few extra steps in order to work properly.
The developer got back to me and told me I'd need to install a MAMP solution in order to run the app.
So I installed that and then took the unzipped folder and all its contents in this folder /MAMP/htdocs/
Then when I visit http://localhost:8888/ZMenuMaker/ the app runs without a hitch!
Related
I am trying to fix one venerability on my production web server(Apache), Venerability is "The HTTP headers sent by the remote web server disclose information that can aid an attacker, such as the server version and technologies used by the web server"
For this I have gone for some solutions , some where I found that to solve the above Venerability we need to edit the httpd.conf file on server but I did not find httpd.conf file in my entire system (using windows 10 os) can any one please let me know hot find that file or how to resolve that Venerability on production ?
You can find httpd.conf in
installed folder ex Apache24
Apache24/conf/httpd.conf
On Windows, I have seen people run Apache from all kinds of weird and wonderful places.
You need to track down where your Apache instance is running from, normally its running as a service on windows. If you open the properties on the service and look at the Path to executable, it should be something similar to the below.
"C:\Program Files\Apache24\bin\httpd.exe" -k runservice
Or it could be
"D:\Some Application\Version\WEB\tool\SOFTS\HTTPD\bin\httpd.exe" -k runservice
Unless there is an -f flag, setting the location of the conf. There will be a "conf" folder at the same level as the "bin" folder regardless of the path. This location is set at compile time so unless you have bespoke version off Apache this should be the location.
If you are struggling to find the service or a launcher that is running Apache. You can use WMI with a WQL query to look for processes which are called httpd.exe and get its executable path.
wmic process WHERE name="httpd.exe" GET ExecutablePath
In Xampp Control panel, in apache row, click on "config" button and then you see the term Apache(httpd.conf).
I built the login functionality for a website on an AWS ec2 ubuntu with LAMP setup and it was working fine. The PHP files for this were located in /var/www/html. Then, to also allow login from an android device, I added and began working on the directory android_login_api in the /www folder. After adding several files and directories to this I noticed the website was no longer working and displayed "This webpage is not available" when I attempted to reach it. Despite completely removing android_login_api and attempting to revert the directory /www to just the way it was when it worked, this error remains.
I have spent a few days searching for a solution, but most answers pertain to the setup of apache which was already working fine for me. I tried restarting apache but neither index.php nor any other files I specify can be reached. I have also spent a lot of time trying to edit apache .conf files but with no luck.
Any ideas about what may have happened or if there is a specific path I need but may have accidentally altered would be greatly appreciated.
Most of access problems are caused by incorrect configuration of Virtual Hosts which seems like the problem here.
As you mentioned, the readable directory was /var/www/html and then you tried to access /var/www/android_login_api, which is not accessible by default and is specified in your virtual host file for the website. Location: /etc/apache2/sites-available
If you have done it different to this article, it will be difficult for anyone to help you. Don't create hosts in apache.conf. Read it before reading my answer further.
When you make changes to the virtual host, don't forget to use sudo a2ensite yoursite.com.conf as well as restarting apache service with sudo service apache2 restart after enabling the site.
The last thing that you should know about setting up websites is www directory owner. When you done making changes to files via FTP or SSH, run sudo chown www-data:www-data /var/www -R. www-data is the username like root used by Apache to allow external access. Otherwise the fiels will be accessible only with 0755 permissions by any other user and not 0644.
This is just a bunch of things essential to make changes and work with HTTP servers. Though my answer is not clear and I'm unable to point out your issue, I believe I've given you additional knowlege/consideration points to troubleshoot your issue. Drop a comment for more specifics.
EDIT:
I did find out a few key things:
In Windows 7, (Maybe other OS's?) There is a hosts file. That hosts file controls custom local URL addresses. You can define a custom name for a local host URL. For example: mywebserver.localhost. If you want your browser to serve local files from your computer with a custom URL name, you can set that in the hosts file. The hosts file is located in Drive:\Windows\System32\drivers\etc. If you don't have permissions to write to that file, you'll get an error message stating the the file isn't found, or something like that when you try to save the file.
Apache has a conf folder with a file in it named: httpd.conf. That controls the configuration directives for Apache.
If you want to link PHP to Apache, PHP has a PHP.ini file that needs to be configured.
END EDIT
I installed WANdisco Subversion, for Windows7 32bit (Link for reference)
Subversion - Version Control
and it installed with APACHE 2.2 in a sub-folder.
The only reason I install Subversion, was that a Google help page:
Install the Google Client Library for PHP
stated that it was required to download the source code needed for the Google API PHP Client Library.
Then I installed PHP and Apache 2.4 in their own folders, and configured the C:\Apache24\conf\httpd.conf file to point to a local webserver. (Along with some other configurations)
YouTube install Apache on Windows 7
The path in my operating system is:
C:\Program Files\WANdisco\Subversion\Apache2\bin;C:\Program
Files\WANdisco\Subversion;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:Python27;C:Python27\Scripts;C:\php
The localhost in my web browser will load an HTML file from the Apache set up in the Subversion Directory, but not from the C:\Apache24 directory.
How am I going to keep both Apache installations, and get the localhost to load HTML files from someplace other than the C:\Program Files\WANdisco\Subversion directory? I'm tempted to just delete the Apache folder from WANdisco\Subversion. Or just unistall the whole Subversion software. I'll probably never use it again.
Sounds to me like you don't need a server install of Subversion, but only the client.
I'd suggest uninstalling the version you have an installing the Client only download, which won't come with Apache httpd.
I want to test some code on localhost before uploading to a live site. So I decided to install Apache. I'm running 64bit windows 7 enterprise edition. I downloaded httpd-2.0.64-win32-x86-no_ssl.msi. I installed it under C:\Program Files (x86)\Apache Group\Apache2
I have set domain name and server name to localhost in my installation, and used default value for all other steps. In my configuration file httpd.conf, I have ServerName localhost:80.
I followed everything I can find on online apache installation tutorials. But when I typed in localhost in my browser, I got a 404 error :(
I know it's very hard to diagnose this way, but I just wonder if someone can spot an important step I'm missing.
I'm feeling it could be something to do with my 64bit machine, and the long folder name Program Files (x86). But I have tried to install on C:\Apache directly and failed too (even got an error during installation). Can someone help?
Finally figured it out. Apache service didn't start because another system process was listening to port 80. Refer to these two posts for solutions:
http://forums.zpanelcp.com/archive/index.php/t-5265.html
http://www.softaculous.com/board/index.php?tid=1575&title=Apache_won%27t_start
Good luck to all!
Did you start the service?
Also, you should install XAMPP or WAMPP, which offers Apache, PHP and MySQL support without all the configuration hassle.
If you got a 404 error then either the webserver is running or you failed to start it and have something very wrong with the existing network config on your machine.
The latter is a lot more likely - and you can check this by looking at the logs which it has generated - there should be entries in both the access and error log.
If the problem is the spaces in the path (you'll see an error relating to the documentroot from the entries added to the error_log at startup) then (IIRC) you can either enclose the path in double quotes or use a path for the document root which doesn't have spaces - the content doesn't have to site below the directory you installed Apache into - indeed it's arguable that using a different path is good practice. Note that several versions of mod_fcgid don't like paths with spaces even if you quote them.
I recently installed Apache and enabled "localhost" with Windows. When I type "localhost" in my browser, it brings me to a page explaining that the Apache installation was successful. I just don't know where to find this. Is it reading some index.html file? If so, I just can't find it.
I tried going to C:\inetpub\wwwroot but the "localhost" in the browser is not reading it from this location. Where else is it reading localhost from? I use Windows 7.
This is usually found in \apache\htdocs on a Windows default install. The 'Pre-Installation' steps covered in this Apache, PHP and MySQL setup guide might be helpful.
If you use a default install of WampServer, it will be in C:\wamp\www