SELECT
c.ClaimId, c.Number, s.ClaimStatusId StatusId, c.ClaimedAmount,
c.Created AS Lodged, c.Updated,
(u.UserName + '' + u.LastName) AS Creditor,
c.JobId, j.CompanyName AS JobName,
outcome.Approved AS ApprovedAmount, outcome.Rejected AS RejectedAmount,
s.NormalizedName AS Status, type.Name AS Type, c.Version, c.RemarksCount
FROM
ClaimView c
INNER JOIN
ClaimType type ON c.TypeId = type.ClaimTypeId
LEFT JOIN
ClaimOutcome outcome ON outcome.ClaimId = c.ClaimId
INNER JOIN
Job j ON c.JobId = j.JobId
INNER JOIN
ApplicationUser u ON u.Id = c.CreatedBy
INNER JOIN
ClaimStatus s ON s.ClaimStatusId = c.StatusId
WHERE
c.CreatedBy = #userId
AND c.StatusId > 1
AND c.IsDeleted = (CASE #isAdmin
WHEN 'False' THEN 0
END)
There's #isAdmin variable and I need to return date with #isAdmin IN (1,0) or to not use WHERE c.IsDeleted at all in case of #isAdmin is True. How I can implement it? That's my current code above.
AND c.isDeleted = CASE WHEN #isAdmin = 'False' THEN 0 ELSE c.isDeleted END
You can use a simple OR to
either check on the fact that #isAdmin is NOT false (alternatively you could/should check against #isAdmin='true')
or c.isDeleted = 0
But you will not need both conditions to be true.
...
WHERE
c.CreatedBy = #userId
AND c.StatusId > 1
AND (#isAdmin != 'False' OR c.IsDeleted = 0 )
This should do. Might be overkill, but I think it's also more technically sound with the NULL handing:
(
AND (
#isAdmin = 'False'
AND c.IsDeleted = 0
)
OR
(#isAdmin <> 'False'
AND c.isDeleted IS NULL
)
)
Related
So I apologize for the wall of code, but I'm losing my mind over this tiny issue that is kicking my butt. The below query works perfectly and gives me everything I need to see with the exception of one column from DB.ACTIVITY_T. The moment I add said column, I immediately get duplicates where there is a MNT.ARRIVEDTS present. I can't seem to figure out why adding one more column to my select statement is causing this duplication. Maybe I'm too deep into this to see what's right in front of me? If you see what could be causing the error, please feel free to enlighten me.
SELECT
TRIM(B.REFNUMBER) AS "REFNUMBER"
,DATE(NUM_TSTAMP) AS "P/U DATE"
,CASE WHEN DATE(REPORT_TS) IS NULL THEN '' ELSE CHAR(DATE(REPORT_TS)) END AS "DELIVERY DATE"
,CASE WHEN REPORT_TS IS NULL THEN 'N' ELSE 'Y' END AS "DELIVERED"
,B.WEIGHT AS "WGT"
,B.PIECES
,B.WANT_DATE
,CEIL(B.CUBE) AS "SHPMNT CUBE"
,CASE WHEN B.DESTINATION = '5647' THEN 'DERPO'
WHEN B.DESTINATION = '1234' THEN 'DERPB'
WHEN B.DESTINATION = '9856' THEN 'DERPC'
ELSE ''
END AS "DERP POINT"
,CASE WHEN R.REFNO IS NULL THEN '' ELSE CHAR(R.REFNO) END AS "DERP #"
,CASE WHEN C.CITY = 'DERPSTON' THEN 'BLAH'
WHEN C.CITY = 'DERPELVANIA' THEN 'HABD'
WHEN C.CITY = 'DERPVILLE' THEN 'POIN'
ELSE ''
END AS "SEQUENCE"
,CASE WHEN E.EVENT_DESCRIPTION = 'ABCD' THEN 'Y'
ELSE 'N'
END AS "DERP DERP"
,DATE(E.EVENT_TIMESTAMP) AS "DERP DATE"
,TIME(E.EVENT_TIMESTAMP) AS "DERP TIME"
,CASE WHEN I.DOC_TYPE = 'DERPI' THEN 'Y'
ELSE 'N'
END AS "DERP
,CASE WHEN B.CUBE > '0.5' THEN 'Y' ELSE 'N' END AS "DERP CUBE”
,MNT."DERP ARRIVED"
FROM PQ.MAIN B
INNER JOIN PQ.MAIN_ALTERNATE A
ON B.REFNUMBER = A.REFNUMBER
AND B.CORRECTION = A.CORRECTION
AND A.NUMBER_KEY = ''
INNER JOIN PQ.MAIN_NAME C
ON C.REFNUMBER = B.REFNUMBER
AND C.CORRECTION = B.CORRECTION
AND C.TYPE = 'C'
AND C.NUMBER_KEY = ''
AND C.NUM_CODE = 'ABCD'
INNER JOIN PQ.MAIN_NAME S
ON B.REFNUMBER = S.REFNUMBER
AND B.CORRECTION = S.CORRECTION
AND S.TYPE = 'S'
AND S.COUNTRY = 'US'
AND S.NUMBER_KEY = ''
LEFT OUTER JOIN DB.ACTIVITY_NUM MN
ON MN.REFNUMBER = B.REFNUMBER
LEFT OUTER JOIN (SELECT MAX(DATE(A.ARRIVEDTS)) AS "DERP ARRIVED", MFSTNBR
FROM AF.MANIFEST_T A WHERE A.DESTINATION IN ('1234','5647') GROUP BY MFSTNBR) AS MNT
ON MNT.MFSTNBR = MN.MFSTNBR
LEFT OUTER JOIN PQ.MAIN_EVENT E
ON E.REFNUMBER = B.REFNUMBER
AND E.EVENT_TYPE = 'R'
AND E.EVENT_DESCRIPTION = 'RANDO'
AND E.NUMBER_KEY = ''
LEFT OUTER JOIN DB.DERP_INDEX I
ON B.REFNUMBER = I.REFNUMBER
AND I.DOC_TYPE = 'LIE'
AND PAGE_NUM = '1'
AND I.INDEX_DATE >= CURRENT DATE - 15 DAYS
LEFT OUTER JOIN PQ.MAIN_REFNO R
ON R.REFNUMBER = B.REFNUMBER
AND R.CORRECTION = B.CORRECTION
AND REFNO LIKE '%BOOG%'
AND R.NUMBER_KEY = ''
WHERE B.NUM_NUM_NUM = '123'
AND B.DESTINATION IN ('1234','5647','9856')
AND DATE(B.NUM_TSTAMP) >= CURRENT DATE - 10 DAYS
GROUP BY
TRIM(B.REFNUMBER)
,DATE(NUM_TSTAMP)
,CASE WHEN DATE(REPORT_TS) IS NULL THEN '' ELSE CHAR(DATE(REPORT_TS)) END
,CASE WHEN REPORT_TS IS NULL THEN 'N' ELSE 'Y' END
,B.WEIGHT
,B.PIECES
,B.WANT_DATE
,CEIL(B.CUBE)
,CASE WHEN B.DESTINATION = '5647' THEN 'DERPO'
WHEN B.DESTINATION = '1234' THEN 'DERPB'
WHEN B.DESTINATION = '9856' THEN 'DERPC'
ELSE ''
END
,CASE WHEN R.REFNO IS NULL THEN '' ELSE CHAR(R.REFNO)
,CASE WHEN C.CITY = 'DERPSTON' THEN 'BLAH'
WHEN C.CITY = 'DERPELVANIA' THEN 'HABD'
WHEN C.CITY = 'DERPVILLE' THEN 'POIN'
ELSE ''
END
,CASE WHEN E.EVENT_DESCRIPTION = 'ABCD' THEN 'Y'
ELSE 'N'
END
,DATE(E.EVENT_TIMESTAMP)
,TIME(E.EVENT_TIMESTAMP)
,CASE WHEN I.DOC_TYPE = 'DERPI' THEN 'Y'
ELSE 'N'
END
,CASE WHEN B.CUBE > '0.5' THEN 'Y' ELSE 'N' END
,MNT."DERP ARRIVED"
Here are the results that you asked for.
REFNUMBER DERP ARRIVED MFSTNBR
123456789 [null] [null]
123456789 [null] [null]
123456789 2015-12-15 32304587
987654321 [null] [null]
987654321 [null] [null]
987654321 2015-12-13 49304483
Each null actually has a different MFSTNBR tied to it, but it's returning a null because it doesn't meet the '1234' or '5647' criteria. If I remove the destination criteria the nulls would be replaced with similar but different MFSTNBR.
My guess is you're getting multiple records from MNT when you only want one...
Likely MNT.Destination having 2 different values will result in 2 records for the max, not one.
Replace the
LEFT OUTER JOIN DB.ACTIVITY_T MNT
with
(SELECT MAX(DATE(MNT.ARRIVEDTS)) as "DERP ARRIVED", MFSTNBR
FROM DB.Activity_T
WHERE MNT.DESTINATION IN ('1234','5647')
GROUP BY MFSTNBR) as MNT
and eliminate the join critiera;
ND MNT.DESTINATION IN ('1234','5647') as it's taken care of by the inline view.
oh and modify the select to just look for "DERP ARRIVED" on the top most select.
Just my guess...
SELECT
TRIM(B.REFNUMBER) AS "REFNUMBER"
,DATE(NUM_TSTAMP) AS "P/U DATE"
,CASE WHEN DATE(REPORT_TS) IS NULL THEN '' ELSE CHAR(DATE(REPORT_TS)) END AS "DELIVERY DATE"
,CASE WHEN REPORT_TS IS NULL THEN 'N' ELSE 'Y' END AS "DELIVERED"
,B.WEIGHT AS "WGT"
,B.PIECES
,B.WANT_DATE
,CEIL(B.CUBE) AS "SHPMNT CUBE"
,CASE WHEN B.DESTINATION = '5647' THEN 'DERPO'
WHEN B.DESTINATION = '1234' THEN 'DERPB'
WHEN B.DESTINATION = '9856' THEN 'DERPC'
ELSE ''
END AS "DERP POINT"
,CASE WHEN R.REFNO IS NULL THEN '' ELSE CHAR(R.REFNO) END AS "DERP #"
,CASE WHEN C.CITY = 'DERPSTON' THEN 'BLAH'
WHEN C.CITY = 'DERPELVANIA' THEN 'HABD'
WHEN C.CITY = 'DERPVILLE' THEN 'POIN'
ELSE ''
END AS "SEQUENCE"
,CASE WHEN E.EVENT_DESCRIPTION = 'ABCD' THEN 'Y'
ELSE 'N'
END AS "DERP DERP"
,DATE(E.EVENT_TIMESTAMP) AS "DERP DATE"
,TIME(E.EVENT_TIMESTAMP) AS "DERP TIME"
,CASE WHEN I.DOC_TYPE = 'DERPI' THEN 'Y'
ELSE 'N'
END AS "DERP
,CASE WHEN B.CUBE > '0.5' THEN 'Y' ELSE 'N' END AS "DERP CUBE”
-------Modified the next line--------------
,MNT."DERP ARRIVED"
FROM PQ.MAIN B
INNER JOIN PQ.MAIN_ALTERNATE A
ON B.REFNUMBER = A.REFNUMBER
AND B.CORRECTION = A.CORRECTION
AND A.NUMBER_KEY = ''
INNER JOIN PQ.MAIN_NAME C
ON C.REFNUMBER = B.REFNUMBER
AND C.CORRECTION = B.CORRECTION
AND C.TYPE = 'C'
AND C.NUMBER_KEY = ''
AND C.NUM_CODE = 'ABCD'
INNER JOIN PQ.MAIN_NAME S
ON B.REFNUMBER = S.REFNUMBER
AND B.CORRECTION = S.CORRECTION
AND S.TYPE = 'S'
AND S.COUNTRY = 'US'
AND S.NUMBER_KEY = ''
LEFT OUTER JOIN DB.ACTIVITY_NUM MN
ON MN.REFNUMBER = B.REFNUMBER
-------Modified the next line--------------
LEFT OUTER JOIN (SELECT MAX(DATE(A.ARRIVEDTS)) as "DERP ARRIVED", MFSTNBR
FROM DB.Activity_T A
WHERE A.DESTINATION IN ('1234','5647')
GROUP BY MFSTNBR) as MNT
ON MNT.MFSTNBR = MN.MFSTNBR
-------Removed this line. the next line--------------
---and MNT.DESTINATION IN ('1234','5647') -------
LEFT OUTER JOIN PQ.MAIN_EVENT E
ON E.REFNUMBER = B.REFNUMBER
AND E.EVENT_TYPE = 'R'
AND E.EVENT_DESCRIPTION = 'RANDO'
AND E.NUMBER_KEY = ''
LEFT OUTER JOIN DB.DERP_INDEX I
ON B.REFNUMBER = I.REFNUMBER
AND I.DOC_TYPE = 'LIE'
AND PAGE_NUM = '1'
AND I.INDEX_DATE >= CURRENT DATE - 15 DAYS
LEFT OUTER JOIN PQ.MAIN_REFNO R
ON R.REFNUMBER = B.REFNUMBER
AND R.CORRECTION = B.CORRECTION
AND REFNO LIKE '%BOOG%'
AND R.NUMBER_KEY = ''
WHERE B.NUM_NUM_NUM = '123'
AND B.DESTINATION IN ('1234','5647','9856')
AND DATE(B.NUM_TSTAMP) >= CURRENT DATE - 10 DAYS
GROUP BY
TRIM(B.REFNUMBER)
,DATE(NUM_TSTAMP)
,REPORT_TS
,REPORT_TS
,B.WEIGHT
,B.PIECES
,B.WANT_DATE
,CEIL(B.CUBE)
,B.DESTINATION
,R.REFNO
,C.CITY
,E.EVENT_DESCRIPTION
,DATE(E.EVENT_TIMESTAMP)
,TIME(E.EVENT_TIMESTAMP)
,I.DOC_TYPE
,B.CUBE
--- Added this line----
,MNT."DERP ARRIVED"
hi good people please find the code below is running in db2 but fails in oracle.
select * from
(select distinct e.time_stamp,e.applicationid, e.processname,
e.stage, e.initiatingsource, e.status, e.start_time, i.consultant,
g.cifnumber, g.applicantfirstname, g.applicantlastname,
case when e.branch is not null
then e.branch
else case when g.branch is not null
then g.branch
else i.branch
end
end as branch
from (select c.time_stamp, b.applicationid, b.processname,
b.stage, b.branch, b.initiatingsource,
case when d.status is null
then c.status
else d.status
end as status,
c.time_stamp as START_TIME,
case when d.time_stamp is not null
then d.time_stamp
else current_timestamp
ens as END_TIME
from (select distinct f.applicationid, f.branch, f.initiatingsource, f.processname,
case when f.stage in ('START''END')
then 'APPLICATION'
else f.stage, f.stagecounter
from processmetric f) b
left join processmetric c on b.applicationid = c.applicationid and b.processname = c.processname and (b.stage = c.stage or (b.stage = 'APPLICATION' and c.stage = 'START')) and b.stagecounter = c.stagecounter and c.phase = 'START'
left join processmetric d on b.applicationid = d.applicationid and b.processname = d.processname and (b.stage = d.stage or (b.stage = 'APPLICATION' and d.stage = 'END')) and b.stagecounter = d.stagecounter and d.phase ='END')e
left join applicationcustomerdata g on g.applicationid = e.applicationid
and g.time_stamp in (select max(x.time_stamp)
from applicationcustomerdata x
where x.applicationid = g.applicationid
)
left join applicationdata i on i.applicationid = e.applicationid
and i.time_stamp in (select max(z.time_stamp)
from applicationdata z
where z.applicationid = i.applicationid
)
order by e.start_time
) a
where a.start_time is not null and a.stage not in ('APPLICATION') and a.status not in ('COMPLETE' , 'COMPLETED' , 'CANCEL', 'FRAUD' , 'DECLINE') and a.stage = 'VERIFICATION';
Oracle don't allow to make outer join with subquery. Following 2 joins are problematic ones:
left join applicationcustomerdata g on g.applicationid = e.applicationid
and g.time_stamp in (select max(x.time_stamp)
from applicationcustomerdata x
where x.applicationid = g.applicationid
)
left join applicationdata i on i.applicationid = e.applicationid
and i.time_stamp in (select max(z.time_stamp)
from applicationdata z
where z.applicationid = i.applicationid
)
You need to rewrite statement (if you need this all in one SQL) or write some PL/SQL loops through data.
I am receiving this error when trying to execute the query below. Any ideas or suggestions?
Error:
Multiple columns are specified in an aggregated expression containing an outer reference. If an expression being aggregated contains an outer reference, then that outer reference must be the only column referenced in the expression.
SELECT TestInstances.pkTestInstanceID AS 'pkTestInstanceID',
bands.pkPerformanceLevelReportBandID AS 'BandID',
bands.StackPosition AS 'StackPosition',
(SELECT TOP 100 PERCENT SUM(CASE WHEN bands.StackPosition = b.StackPosition THEN 1 ELSE 0 END) * 100/ CASE WHEN COUNT(StudentScores_Subject.pkStudentScoreID) = 0 THEN 1 ELSE COUNT(StudentScores_Subject.pkStudentScoreID) END
FROM PerformanceLevelReportBands b
WHERE b.fkPerformanceLevelReportID = #intPerfLevelReportId
ORDER BY SUM(CASE WHEN bands.StackPosition = b.StackPosition THEN 1 ELSE 0 END) * 100/ CASE WHEN COUNT(StudentScores_Subject.pkStudentScoreID) = 0 THEN 1 ELSE COUNT(StudentScores_Subject.pkStudentScoreID) END) AS 'Percent',
COUNT(StudentScores_Subject.pkStudentScoreID) AS 'Count'
FROM StudentScores_Subject
INNER JOIN StudentTests ON StudentScores_Subject.fkStudentTestID = StudentTests.pkStudentTestID
INNER JOIN TestInstances ON TestInstances.pkTestInstanceID = StudentTests.fkTestInstanceID
INNER JOIN CAHSEE_TestPeriods ON CAHSEE_TestPeriods.pkTestPeriodID = TestInstances.fkTestPeriodID
INNER JOIN PerformanceLevelReportBands bands ON bands.fkPerformanceLevelReportID = #intPerfLevelReportId
LEFT JOIN MMARS_Web_TestInfo_California.dbo.PerfLevelReportBandCutScores cutScores ON cutScores.fkPerformanceLevelReportBandID = bands.pkPerformanceLevelReportBandID
AND cutScores.fkGradeID = #intGradeId
AND cutScores.fkTestSubjectID IN (SELECT id FROM #tempSubs)
INNER JOIN PerfLevelReportBandComponents bandComponents ON bandComponents.fkPerformanceLevelReportBandID = bands.pkPerformanceLevelReportBandID
AND((bandComponents.ScoreValue = StudentScores_Subject.ScoreValue) OR
((CAST(StudentScores_Subject.ScoreValue AS INT) BETWEEN bandComponents.minScore and bandComponents.maxScore)
OR
(CAST(StudentScores_Subject.ScoreValue AS INT) BETWEEN cutScores.minScore and cutScores.maxScore)))
RIGHT JOIN MM_SchoolYears ON MM_SchoolYears.pkSchoolYearID = TestInstances.fkSchoolYearID
WHERE MM_SchoolYears.pkSchoolYearID IN (SELECT number FROM itot(#strYearIds, N','))
AND StudentScores_Subject.fkStudentTestID IN (SELECT id FROM #tempTests)
AND StudentScores_Subject.fkScoreTypeID = bandComponents.fkScoreTypeID
AND StudentScores_Subject.fkTest_SubjectID IN (SELECT id FROM #tempSubs)
GROUP BY TestInstances.pkTestInstanceID, bands.pkPerformanceLevelReportBandID, bands.StackPosition
ORDER BY TestInstances.pkTestInstanceID, bands.pkPerformanceLevelReportBandID, bands.StackPosition
The problem is here you can't combine an outer and inner reference in an aggregate function
(SELECT TOP 100 PERCENT SUM(CASE WHEN bands.StackPosition = b.StackPosition THEN 1 ELSE 0 END) * 100/ CASE
WHEN COUNT(StudentScores_Subject.pkStudentScoreID) = 0 THEN 1
ELSE COUNT(StudentScores_Subject.pkStudentScoreID)
END
FROM PerformanceLevelReportBands b
WHERE b.fkPerformanceLevelReportID = #intPerfLevelReportId
ORDER BY SUM(CASE WHEN bands.StackPosition = b.StackPosition THEN 1 ELSE 0 END) * 100/ CASE
WHEN COUNT(StudentScores_Subject.pkStudentScoreID) = 0 THEN 1
ELSE COUNT(StudentScores_Subject.pkStudentScoreID)
END) AS 'Percent'
So change it to
(SELECT TOP 100 PERCENT SUM(CASE WHEN bb.StackPosition = b.StackPosition THEN 1 ELSE 0 END) * 100/ CASE
WHEN COUNT(StudentScores_Subject.pkStudentScoreID) = 0 THEN 1
ELSE COUNT(StudentScores_Subject.pkStudentScoreID)
END
FROM PerformanceLevelReportBands b JOIN PerformanceLevelReportBands bb
ON bb.fkPerformanceLevelReportID =bands.fkPerformanceLevelReportID
AND b.fkPerformanceLevelReportID =bb.fkPerformanceLevelReportID
WHERE b.fkPerformanceLevelReportID = #intPerfLevelReportId
ORDER BY SUM(CASE WHEN bb.StackPosition = b.StackPosition THEN 1 ELSE 0 END) * 100/ CASE
WHEN COUNT(StudentScores_Subject.pkStudentScoreID) = 0 THEN 1
ELSE COUNT(StudentScores_Subject.pkStudentScoreID)
END) AS 'Percent'
Here is a more thorough explanation.
I'd recommend commenting out bandComponents then cutScores, rerunning after removing each components and seeing where the query fails. Once you figure out where it's failing, then you can fix it.
Also, could be this line, the query in your Percent column.
ORDER BY SUM(CASE WHEN bands.StackPosition = b.StackPosition THEN 1 ELSE 0 END) * 100
I tried to organize your query a bit better to make it more legible.
SELECT
TestInstances.pkTestInstanceID AS 'pkTestInstanceID'
, bands.pkPerformanceLevelReportBandID AS 'BandID'
, bands.StackPosition AS 'StackPosition'
, (
SELECT TOP 100 PERCENT
SUM( CASE
WHEN bands.StackPosition = b.StackPosition
THEN 1
ELSE 0
END) * 100 /
CASE
WHEN COUNT(StudentScores_Subject.pkStudentScoreID) = 0
THEN 1
ELSE COUNT(StudentScores_Subject.pkStudentScoreID)
END
FROM PerformanceLevelReportBands b
WHERE b.fkPerformanceLevelReportID = #intPerfLevelReportId
ORDER BY SUM(CASE WHEN bands.StackPosition = b.StackPosition THEN 1 ELSE 0 END) * 100
/
CASE
WHEN COUNT(StudentScores_Subject.pkStudentScoreID) = 0
THEN 1
ELSE COUNT(StudentScores_Subject.pkStudentScoreID)
END
) AS 'Percent'
, COUNT(StudentScores_Subject.pkStudentScoreID) AS 'Count'
FROM
StudentScores_Subject
INNER JOIN
StudentTests ON
StudentScores_Subject.fkStudentTestID = StudentTests.pkStudentTestID
INNER JOIN
TestInstances ON
TestInstances.pkTestInstanceID = StudentTests.fkTestInstanceID
INNER JOIN
CAHSEE_TestPeriods ON
CAHSEE_TestPeriods.pkTestPeriodID = TestInstances.fkTestPeriodID
INNER JOIN
PerformanceLevelReportBands bands ON
bands.fkPerformanceLevelReportID = #intPerfLevelReportId
LEFT JOIN
MMARS_Web_TestInfo_California.dbo.PerfLevelReportBandCutScores cutScores ON
cutScores.fkPerformanceLevelReportBandID = bands.pkPerformanceLevelReportBandID
AND cutScores.fkGradeID = #intGradeId
AND cutScores.fkTestSubjectID IN (SELECT id FROM #tempSubs)
INNER JOIN
PerfLevelReportBandComponents bandComponents ON
bandComponents.fkPerformanceLevelReportBandID = bands.pkPerformanceLevelReportBandID
AND(
(bandComponents.ScoreValue = StudentScores_Subject.ScoreValue) OR
(
(CAST(StudentScores_Subject.ScoreValue AS INT) BETWEEN bandComponents.minScore and bandComponents.maxScore) OR
(CAST(StudentScores_Subject.ScoreValue AS INT) BETWEEN cutScores.minScore and cutScores.maxScore)
)
)
RIGHT JOIN
MM_SchoolYears ON
MM_SchoolYears.pkSchoolYearID = TestInstances.fkSchoolYearID
WHERE
MM_SchoolYears.pkSchoolYearID IN (SELECT number FROM itot(#strYearIds, N','))
AND StudentScores_Subject.fkStudentTestID IN (SELECT id FROM #tempTests)
AND StudentScores_Subject.fkScoreTypeID = bandComponents.fkScoreTypeID
AND StudentScores_Subject.fkTest_SubjectID IN (SELECT id FROM #tempSubs)
GROUP BY TestInstances.pkTestInstanceID, bands.pkPerformanceLevelReportBandID, bands.StackPosition
ORDER BY TestInstances.pkTestInstanceID, bands.pkPerformanceLevelReportBandID, bands.StackPosition
I faced the same problem or something similar.
I left here both the initial code and the resolution in case it helps you.
Initial code:
SELECT ISNULL((SELECT DateName(mm,DATEADD(mm,Perioada - 1,0))),'Nedefinit') as [Period],MAX(t.TipPerioada) AS TipPerioada,t.Perioada,MAX(t.An) AS An, a.NumePrenume, CAST(t.Volum as float) as ValTip,
ISNULL((Select Sum(v.Cantitate*p.VolumProdus)
From Wme_Vanzari as v
WHERE ('ND'='ND' or v.MarcaAgent = t.MarcaAgent) and t.[An]=v.AnFactura and t.Perioada=v.Lunafactura),0) as Realizat,
'' as Diferenta,'' as DiferentaWD,'' as Procent
FROM [Memo_Target] t
--Aduce Suma de Cantitate si MarcaAgent pentru a nu dubla cu liniile din Vanzari
LEFT JOIN (Select SUM(Cantitate) as Cantitate, MarcaAgent
From Wme_Vanzari
WHERE AnFactura = #An
GROUP BY MarcaAgent) v on t.MarcaAgent = v.MarcaAgent
LEFT JOIN WME_Agenti a on a.Marca = t.MarcaAgent
--Aduce Suma de VolumProdus, CodProdus si Marca Agent Filtrat dupa Anul dat in parametru, Volum necesar pt a calcula Realizat si a scade din targetul setat
LEFT JOIN (SELECT SUM(ISNULL(n.VolumProdus, 0)) AS VolumProdus, v.CodProdus, v.MarcaAgent
FROM Wme_NomenclatorProduse n
LEFT JOIN Wme_Vanzari v ON v.CodProdus = n.CodIntern
WHERE v.MarcaAgent IS NOT NULL AND v.CodProdus IS NOT NULL AND v.AnFactura = #An
GROUP BY v.CodProdus, v.MarcaAgent ) p ON p.MarcaAgent = t.MarcaAgent
WHERE (t.Volum IS NOT NULL AND t.Volum > 0)
AND t.An = #An
AND (CAST(t.Perioada AS INT) BETWEEN #lunastart AND #lunaend)
AND TipTarget = #tiptarget
AND (a.Marca IN (SELECT * FROM dbo.GetIdsTableString(#marcaAgent)) OR #marcaAgent = 'ND')
GROUP BY a.NumePrenume, t.Volum, Perioada,t.An
Error message was the same, and this is the resolution code:
SELECT ISNULL((SELECT DateName(mm,DATEADD(mm,Perioada - 1,0))),'Nedefinit') as [Period],MAX(t.TipPerioada) AS TipPerioada,t.Perioada,MAX(t.An) AS An, a.NumePrenume, CAST(t.Volum as float) as ValTip,
(ISNULL((Select Sum(p.VolumProdus)
From Wme_Vanzari as v
WHERE ('ND'='ND' or v.MarcaAgent = t.MarcaAgent) and t.[An]=v.AnFactura and t.Perioada=v.Lunafactura),0) * sum(v.Cantitate)) as Realizat,
'' as Diferenta,'' as DiferentaWD,'' as Procent
FROM [Memo_Target] t
--Aduce Suma de Cantitate si MarcaAgent pentru a nu dubla cu liniile din Vanzari
LEFT JOIN (Select SUM(Cantitate) as Cantitate, MarcaAgent
From Wme_Vanzari
WHERE AnFactura = #An
GROUP BY MarcaAgent) v on t.MarcaAgent = v.MarcaAgent
LEFT JOIN WME_Agenti a on a.Marca = t.MarcaAgent
--Aduce Suma de VolumProdus, CodProdus si Marca Agent Filtrat dupa Anul dat in parametru, Volum necesar pt a calcula Realizat si a scade din targetul setat
LEFT JOIN (SELECT SUM(ISNULL(n.VolumProdus, 0)) AS VolumProdus, v.CodProdus, v.MarcaAgent
FROM Wme_NomenclatorProduse n
LEFT JOIN Wme_Vanzari v ON v.CodProdus = n.CodIntern
WHERE v.MarcaAgent IS NOT NULL AND v.CodProdus IS NOT NULL AND v.AnFactura = #An
GROUP BY v.CodProdus, v.MarcaAgent ) p ON p.MarcaAgent = t.MarcaAgent
WHERE (t.Volum IS NOT NULL AND t.Volum > 0)
AND t.An = #An
AND (CAST(t.Perioada AS INT) BETWEEN #lunastart AND #lunaend)
AND TipTarget = #tiptarget
AND (a.Marca IN (SELECT * FROM dbo.GetIdsTableString(#marcaAgent)) OR #marcaAgent = 'ND')
GROUP BY a.NumePrenume, t.Volum, Perioada,t.An
As you can see, I chose to leave a single column in the first subselect and i was forced to use multiplication operation after this subselect.
I hope it helps!
I've been trying to change this query. I don't want to use 'Not In' in this query. Can anybody help me how to change this query to left join query?
SELECT t.date,t.ticket,t.weight,t.Count, td.description
FROM tblticket t inner join tblticketdetails td on t.ticket = td.ticket
WHERE t.ticket NOT IN (SELECT r.Original_ticket from tblRenew R where isnull(r.new_ticket,'') = '' and r.transaction_status = 'valid')
AND RTRIM(LTRIM(t.status)) = 'OPEN'
AND td.Type = 62
AND t.weight/t.Count >= 1000
AND t.date BETWEEN '2011-12-31' AND '2013-01-17'
Providing that you don't have multiple records in tblRenew for any ticket:
select
t.date, t.ticket, t.weight, t.Count, td.description
from
tblticket t
inner join tblticketdetails td on t.ticket = td.ticket
left join tblRenew R on isnull(r.new_ticket,'') = '' and r.transaction_status = 'valid' and r.Original_ticket = t.ticket
where
r.Original_ticket is not null
and RTRIM(LTRIM(t.status)) = 'OPEN'
and td.Type = 62
and t.weight/t.Count >= 1000
and t.date BETWEEN '2011-12-31' AND '2013-01-17'
SELECT t.date, t.ticket,t.weight, t.Count, td.description
FROM tblticket t inner join
tblticketdetails td
on t.ticket = td.ticket left outer join
(SELECT r.Original_ticket
from tblRenew R
where isnull(r.new_ticket,'') = '' and
r.transaction_status = 'valid'
) v
on t.ticket = v.Original_ticket
WHERE t.ticket NOT IN (SELECT r.Original_ticket from tblRenew R where isnull(r.new_ticket,'') = '' and r.transaction_status = 'valid')
AND RTRIM(LTRIM(t.status)) = 'OPEN'
AND td.Type = 62
AND t.weight/t.Count >= 1000
AND t.date BETWEEN '2011-12-31' AND '2013-01-17'
and v.original_tiket is null
I have an "AcctMgr_Flag" that designates a person as the account manager. This is on the table Company_Team. If I send parameter #acctmgr as 'true', I want to return only Activities where #member is the account manager. If #acctmgr is not true, I do not care whether AcctMgr_Flag is true or not.
Every Activity in SO_Activity has an "Assigned_To" column which designates a member_recid. Every Member in Company_Team has an AcctMgr_Flag and Company_RecID. Every Member in v_rpt_Member has a member_recid and a Company_recid.
Here is my code
SELECT v_rpt_Company.Company_Name, SO_Activity.Subject, SO_Activity.Notes,
SO_Activity.Date_Closed, SO_Activity.Last_Update, v_rpt_Member.Member_ID,
v_rpt_ActivityType.SO_Activity_Type_Desc,
v_rpt_ActivityStatus.SO_Act_Status_Desc
FROM v_rpt_Company
LEFT OUTER JOIN SO_Activity
ON v_rpt_Company.Company_RecID = SO_Activity.Company_RecID
LEFT OUTER JOIN v_rpt_Member
ON SO_Activity.Assign_To = v_rpt_Member.Member_ID
LEFT OUTER JOIN Company_Team
ON v_rpt_Member.Member_RecID = Company_Team.Member_RecID AND
v_rpt_Company.Company_RecID = Company_Team.Company_RecID
LEFT OUTER JOIN v_rpt_ActivityType
ON SO_Activity.SO_Activity_Type_RecID=v_rpt_ActivityType.SO_Activity_Type_RecID
LEFT OUTER JOIN v_rpt_ActivityStatus
ON SO_Activity.so_act_status_recid = v_rpt_ActivityStatus.SO_Act_Status_RecID
WHERE (Company_Team.AcctMgr_Flag =
CASE WHEN #acctmgr = 'true' THEN 1 ELSE Company_Team.AcctMgr_Flag END) AND
(SO_Activity.Assign_To = #member) AND
(v_rpt_ActivityStatus.SO_Act_Status_Desc =
CASE WHEN #act_status IS NULL
THEN v_rpt_ActivityStatus.so_act_status_desc ELSE #act_status END) AND
(v_rpt_Company.Company_RecID =
CASE WHEN #company = '' THEN v_rpt_Company.Company_RecID ELSE #company END) AND
(SO_Activity.Last_Update >= CONVERT(datetime, #date_start, 101)) AND
(SO_Activity.Last_Update <= CONVERT(datetime, #date_end, 101))
GROUP BY v_rpt_Company.Company_Name, SO_Activity.Subject, SO_Activity.Notes,
SO_Activity.Date_Closed, SO_Activity.Last_Update, v_rpt_Member.Member_ID,
v_rpt_ActivityType.SO_Activity_Type_Desc,
v_rpt_ActivityStatus.SO_Act_Status_Desc
ORDER BY v_rpt_Company.Company_Name, SO_Activity.Last_Update DESC
Instead of
(Company_Team.AcctMgr_Flag = CASE WHEN #acctmgr = 'true' THEN 1 ELSE Company_Team.AcctMgr_Flag END)
Put this
(#acctmgr != 'true' or Company_Team.AcctMgr_Flag = 1)