Hello!
Since the 1.7 update of PrestaShop you cannot customize the currency any longer. In my theme by default, the currency symbol displays right before the numbers, without any space. But it should be exactly opposite, symbol after the numbers with a space between them. If anyone knew a way around I would be very grateful.
I could explain here, but there are a lot of tutorials in the web, which I think can be more useful, here one to change the symbol: https://zemez.io/prestashop/support/how-to/prestashop-1-7-%D1%81hange-currency-symbol/
If you want to change the position of the symbol, you need
Go to translations/cldr/main--xx-XX--numbers file (where xx-XX is your language, en-EN, de-DE or ru-RU). Open this file with any code editor.
Find something like this "accounting":" and "standard" and move the \u00a0 to the start or end, depending on where you want to place the symbol.
For example I will move the symbol from the start to the end en-US numbers.
Before: "accounting":"\u00a4#,##0.00;(\u00a4#,##0.00)","standard":"\u00a4#,##0.00"
After: "accounting":"#,##0.00\u00a4;(#,##0.00\u00a4)","standard":"#,##0.00\u00a4"
Hpe this help!
If somebody searching for changing currency sign on PS 1.7.6.
Now it is in the table ps_currency_lang
Via admin panel cannot be changed at the momen, only phpmyadmin :(
Related
I try to make instance copies of my character using Duplicate Special. But unfortunately it crashes every time I try.
For this I select my character's group "rig_group", then go to Edit → Duplicate Special ⊡
And I want to use these settings:
And it crashes Maya when I hit "Apply" or "Duplicate Special".
Note that it works on this character on a fresh file.
Test file - M01_WalkNeutral.0080.mb
Remember that duplicate special doesn't work properly on rig's. You can use duplicate special for polygons, curves or etc.
Ps. If you wanted to duplicate special a high-poly mesh I would say that to reduce the vertex then run that but about rig_group I'm not sure.
I hope to help that to you.
I would like to determine the Thousand Separator used while running a VBA Code on a target machine without resolving to calling system built-in functions such as (Separator = Application.ThousandsSeparator).
I am using the following simple code using 'Format':
ThousandSeparator = Mid(Format(1000, "#,#"), 2, 1)
The above seems to work fine, and would like to confirm if this is a safe method of doing it without resorting to system calls.
I would expect the result to be a single char string in the form of , or . or ' or a Space as applicable to the locale on the machine.
Please note that I want to only use a language statement such as Format or similar (no sys calls). Also this relates to Thousands Separator not Decimal Separator. This article Using VBA to detect which decimal sign the computer is using does not help or answer my question. Thanks
Thanks in advance.
The strict answer to whether it is safe to use Format to get the thousands separator is No.
E.g. on Windows, it is possible to enter up to three characters into the Thousands Separator field in the regional settings in the control panel.
Suppose you enter asd and click OK.
If you now call Format(1000, "#,#") it will give you 1a000. That is only the first letter of your thousands separator. You have failed to retrieve it correctly.
Reading the registry:
? CreateObject("WScript.Shell").RegRead("HKCU\Control Panel\International\sThousand")
you get back asd in full.
To be fair, the Excel international properties do not seem to be of much help either. Application.International(xlThousandsSeparator) in this situation will return the separator originally defined in your computer's locale, not the value you've overridden it to.
Having that said, the practical answer is Yes, because it would appear (and if you happen to know for sure, please post an answer here) that there is no culture with multi-char thousand separator (even in China where scary things like 1億2345万6789 or 1億2345萬6789 exist, they happen to be represented with just one UTF-16 character), and you probably are happy to ignore the people who decided to play with their locale settings in that fashion.
One of the scrapy-ed items seems contain no content in HTML. In MySQL database, it does have content including a non-regular - (dash) that is slightly longer. It could be a dash symbol from Chinese input, or something similar. I am copy it below, not sure whether it will keep the original form. The web link is here and this non-regular dash is in the title and the beginning of the description.
**Hospitalist – Chattanooga**
To further prove it, the export CVS file from MySQL convert this weird dash to ?€?. Most likely this weird symbol causes the non-display problem.
I want to either delete this weird symbol or replace it with a , or a regular dash. Where can it be done? During Scrapy? Or in MySQL? Sorry this is not a specific coding question. I need some guidance before figuring out any codes for this problem.
The long dash is called an EM dash fileformat - EM dash
The reason you are seeing it is likely due to the chosen encoding.
Try setting a different encoding or replacing the EM dash with the , sign as you mentioned in your question.
In php you can do so with the following code:
str_replace(chr(151), ',' $input);
I am working on a ASP.NET MVC app.
This app displays a detail information regarding a product.
The product name can have any special chars like single quote, the percentage symbol, the Registered symbol the one with a circle and 'R' inside, the Trademark symbol etc.
Currently all these are replaced with a '-'.
If the name is like this:
Super - Men's 100% Polyester Knit Shirts
It appears like this in the URL:
8080/super---men-s-100-polyester-knit-shirts/maverick
- men-s-100-polyester-knit-shirts
This is done in Js like so:
Name.replace(/([~!##$%^&*()_+=`{}\[\]\|\\:;'"<>,.\/? ])+/g, '-').replace(/^(-)+|(-)+$/g, '');
So the question is, should the name be displayed as-is in the URL?
If yes, some pointers please.
If no, please provide some valid reasons like standards as followed today that will help me put the point across the table.
Regards.
The short answer is not to fiddle with it. It's as good as it gets out of the box.
The Url can only contain a small number of alphanumeric letters. which basically means you can only have 0-9 a-z and - _ . ~.
All other characters need to be encoded. Now that you can have arabic url's too it has gotten a little more complicated.
But assuming your website is indo-european this is it. So you will never be able to have full product names in your url.
And renaming them as something more cool like replacing % with "percent" in the url can bring desaster upon your url's as in some cases the "fake" names may not end up unique and therefore end up with unreliable routing.
look at URI characters on wiki
I'm using Doxygen to generate documentation for my code. I need to make a PDF version of this and using Doxygen's LaTeX output appears to be the way to do it.
However I've run into a number of annoying problems, and not knowing anything about LaTeX previously haven't really got much of an idea on how to approach them, and the countless references for LaTeX related things are not much help...
I worked out how to create a custom style thing in a sty file and how to get Doxygen to use it. After a lot of searching I found out how to set the page margins etc. through this, and I'm guessing the perhaps this is the file I want for doing the other things I want, but I cant seem to find any commands for doign what I want :(
The table of contents at the start of the document contains a lot of items Id rather it didn't as it makes the contents very long. Is there some way to limit this contents to just say the first two levels, rather than having entries for every single individual function, variable, etc.? Id quite like to keep all the bookmarks however. I did try the "COMPACT_LATEX" option but as well as removing items on the contents pages, it removed the bookmarks and the member lists at the start of each section, which I do really want to keep.
Is there a way to change the order of things, like putting the full class description at the start of the section, rather than after all the members and attributes?
Wow, that's kind of evil of Doxygen.
Okay, to get around the tocdepth counter problem, add the following line to your .sty file:
\AtBeginDocument{\setcounter{tocdepth}{2}}% or whatever level you want
You can set the PDF bookmarks depth to a separate value:
% requires you \usepackage{hyperref} first
\hypersetup{
bookmarksdepth = section, % of whatever level you want
}
Also note that if you have a list of figures/tables, the tocdepth must be at least 2 for them to show up.
I don't see any way of rearranging those items within the LaTeX files---Doxygen just barfs them out there, so we can't do much. You'll have to poke around the Doxygen documentation to see if there's any way to specify the order I guess. (Here's hoping!)
You're so close.
Googling on "latex contents level" brought me to LaTeX - customizing the depth of the table of contents for different parts of the thesis which suggests
\setcounter{tocdepth}{n}
where n starts at zero for only the highest level division. This is presumable defined in all the default styles, but is worth a try in doxygen.
You could write a Perl/Awk script to simply delete the unwanted lines from the table of contents. For the file burble.tex, Latex will generate the file burble.toc, which will contain lines such as:
\contentsline {subsection}{Class F rewrites}{38}
\contentsline {subsection}{Class M rewrites}{39}
\contentsline {section}{\numberline {7}Definition and properties of the translation}{44}
\contentsline {paragraph}{Well-formedness}{54}
Simple regexes will identify which levels each line belongs to, and you can filter the file based on that. Once you have the table of contents the way you want it, insert \nofiles in the appropriate place (the style sheet?), which means that Latex will read the auxiliary files but not overwrite them.