I compiled a higher version of the kernel.
The program data that was eventually run in fs mode is not written to stats.txt.
How do I solve this problem?
Gem5 is the latest version
ubuntu-14.04
build/X86/gem5.opt configs/example/fs.py --disk-image=linux-x86.img --kernel=/home/jiaotong/gem5/gem5-NUCA-master/fs-image/binaries/vmlinux
The kernel is a 3.2.24 kernel compiled with the configuration file of the official website 2.6.28.4.
this is system.terminal：
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Linux version 3.14.0 (sim#openstack1) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #1 SMP PREEMPT Sun May 15 16:33:56 CST 2016
Kernel was built at commit id 'b2af788'
CPU: ARMv7 Processor [410fc0f0] revision 0 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: V2P-CA15
bootconsole [earlycon0] enabled
Memory policy: Data cache writealloc
kdebugv2m: Following are test values to confirm proper working
kdebugv2m: Ranges 42000000 0
kdebugv2m: Regs 30000000 1000000
kdebugv2m: Virtual-Reg f0000000
kdebugv2m: pci node addr_cells 3
kdebugv2m: pci node size_cells 2
kdebugv2m: motherboard addr_cells 2
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat 80679840, node_mem_map 9fbf9000
Normal zone: 1024 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
PERCPU: Embedded 8 pages/cpu #9fbe1000 s12224 r8192 d12352 u32768
pcpu-alloc: s12224 r8192 d12352 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: earlyprintk=pl011,0x1c090000 console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=512MB root=/dev/sda1
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Related
I would like to run OpenVINO on an integrated GPU Intel HD 400.
When I run it I have the following error:
12.05.21 16:02:27 (-0400) self._engine = self._ie.load_network(**openvino_config)
12.05.21 16:02:27 (-0400) File "ie_api.pyx", line 311, in openvino.inference_engine.ie_api.IECore.load_network
12.05.21 16:02:27 (-0400) File "ie_api.pyx", line 320, in openvino.inference_engine.ie_api.IECore.load_network
12.05.21 16:02:27 (-0400) RuntimeError: Failed to create plugin /opt/intel/openvino_2021.1.110/deployment_tools/inference_engine/lib/intel64/libclDNNPlugin.so for device GPU
I followed the instructions to install the GPU plugin here Steps for Intel® Processor Graphics (GPU) and I can confirm that libclDNNPlugin.so exists.
I am running the code within a docker container and I am not sure if the host os has the proper drivers installed.
I run lsmod on host os and I got the following output
Module Size Used by
bnep 20480 2
ip6t_REJECT 16384 2
nf_reject_ipv6 16384 1 ip6t_REJECT
ip6table_filter 16384 1
xt_state 16384 0
ipt_REJECT 16384 2
nf_reject_ipv4 16384 1 ipt_REJECT
ip6_tables 28672 1 ip6table_filter
xt_MASQUERADE 16384 12
nf_conntrack_netlink 32768 0
nfnetlink 16384 2 nf_conntrack_netlink
xfrm_user 36864 1
xt_owner 16384 0
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 98304 1
snd_hda_codec_generic 65536 1 snd_hda_codec_realtek
snd_hda_intel 32768 0
coretemp 16384 0
snd_intel_dspcfg 16384 1 snd_hda_intel
snd_hda_codec 94208 4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
i915 1802240 5
at24 20480 0
r8169 73728 0
snd_hda_core 65536 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
regmap_i2c 16384 1 at24
snd_pcm 86016 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
efivars 20480 0
realtek 20480 2
libphy 81920 2 r8169,realtek
snd_timer 28672 1 snd_pcm
video 40960 1 i915
backlight 16384 2 video,i915
sch_fq_codel 20480 4
The error specifies: [CLDNN ERROR]. No GPU device was found.
Also, clinfo reported 0 platform available.
I run the following commands:
sudo apt install ocl-icd-libopencl1
sudo apt install opencl-headers
sudo apt install clinfo
sudo apt install ocl-icd-opencl-dev
sudo apt install beignet
and now the clinfo output is:
Number of platforms 1
Platform Name Intel Gen OCL Driver
Platform Vendor Intel
Platform Version OpenCL 2.0 beignet 1.3
Platform Profile FULL_PROFILE
Platform Extensions cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_byte_addressable_store cl_khr_3d_image_writes cl_khr_image2d_from_buffer cl_khr_depth_images cl_khr_spir cl_khr_icd cl_intel_accelerator cl_intel_subgroups cl_intel_subgroups_short cl_khr_gl_sharing
Platform Extensions function suffix Intel
Platform Name Intel Gen OCL Driver
Number of devices 1
Device Name Intel(R) HD Graphics Cherryview
Device Vendor Intel
Device Vendor ID 0x8086
Device Version OpenCL 1.2 beignet 1.3
Driver Version 1.3
Device OpenCL C Version OpenCL C 1.2 beignet 1.3
Device Type GPU
Device Profile FULL_PROFILE
Device Available Yes
Compiler Available Yes
Linker Available Yes
Max compute units 12
Max clock frequency 1000MHz
Device Partition (core)
Max number of sub-devices 1
Supported partition types None, None, None
Max work item dimensions 3
Max work item sizes 512x512x512
Max work group size 512
Preferred work group size multiple 16
Preferred / native vector sizes
char 16 / 8
short 8 / 8
int 4 / 4
long 2 / 2
half 0 / 8 (cl_khr_fp16)
float 4 / 4
double 0 / 2 (n/a)
Half-precision Floating-point support (cl_khr_fp16)
Denormals No
Infinity and NANs Yes
Round to nearest Yes
Round to zero No
Round to infinity No
IEEE754-2008 fused multiply-add No
Support is emulated in software No
Single-precision Floating-point support (core)
Denormals No
Infinity and NANs Yes
Round to nearest Yes
Round to zero No
Round to infinity No
IEEE754-2008 fused multiply-add No
Support is emulated in software No
Correctly-rounded divide and sqrt operations No
Double-precision Floating-point support (n/a)
Address bits 32, Little-Endian
Global memory size 2147483648 (2GiB)
Error Correction support No
Max memory allocation 1610612736 (1.5GiB)
Unified memory for Host and Device Yes
Minimum alignment for any data type 128 bytes
Alignment of base address 1024 bits (128 bytes)
Global Memory cache type Read/Write
Global Memory cache size 8192 (8KiB)
Global Memory cache line size 64 bytes
Image support Yes
Max number of samplers per kernel 16
Max size for 1D images from buffer 65536 pixels
Max 1D or 2D image array size 2048 images
Base address alignment for 2D image buffers 4096 bytes
Pitch alignment for 2D image buffers 1 pixels
Max 2D image size 8192x8192 pixels
Max 3D image size 8192x8192x2048 pixels
Max number of read image args 128
Max number of write image args 8
Local memory type Local
Local memory size 65536 (64KiB)
Max number of constant args 8
Max constant buffer size 134217728 (128MiB)
Max size of kernel argument 1024
Queue properties
Out-of-order execution No
Profiling Yes
Prefer user sync for interop Yes
Profiling timer resolution 80ns
Execution capabilities
Run OpenCL kernels Yes
Run native kernels Yes
SPIR versions 1.2
printf() buffer size 1048576 (1024KiB)
Built-in kernels __cl_copy_region_align4;__cl_copy_region_align16;__cl_cpy_region_unalign_same_offset;__cl_copy_region_unalign_dst_offset;__cl_copy_region_unalign_src_offset;__cl_copy_buffer_rect;__cl_copy_image_1d_to_1d;__cl_copy_image_2d_to_2d;__cl_copy_image_3d_to_2d;__cl_copy_image_2d_to_3d;__cl_copy_image_3d_to_3d;__cl_copy_image_2d_to_buffer;__cl_copy_image_3d_to_buffer;__cl_copy_buffer_to_image_2d;__cl_copy_buffer_to_image_3d;__cl_fill_region_unalign;__cl_fill_region_align2;__cl_fill_region_align4;__cl_fill_region_align8_2;__cl_fill_region_align8_4;__cl_fill_region_align8_8;__cl_fill_region_align8_16;__cl_fill_region_align128;__cl_fill_image_1d;__cl_fill_image_1d_array;__cl_fill_image_2d;__cl_fill_image_2d_array;__cl_fill_image_3d;
Device Extensions cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_byte_addressable_store cl_khr_3d_image_writes cl_khr_image2d_from_buffer cl_khr_depth_images cl_khr_spir cl_khr_icd cl_intel_accelerator cl_intel_subgroups cl_intel_subgroups_short cl_khr_gl_sharing cl_khr_fp16
NULL platform behavior
clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...) Intel Gen OCL Driver
clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...) Success [Intel]
clCreateContext(NULL, ...) [default] Success [Intel]
clCreateContextFromType(NULL, CL_DEVICE_TYPE_DEFAULT) Success (1)
Platform Name Intel Gen OCL Driver
Device Name Intel(R) HD Graphics Cherryview
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU) Success (1)
Platform Name Intel Gen OCL Driver
Device Name Intel(R) HD Graphics Cherryview
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL) Success (1)
Platform Name Intel Gen OCL Driver
Device Name Intel(R) HD Graphics Cherryview
ICD loader properties
ICD loader Name OpenCL ICD Loader
ICD loader Vendor OCL Icd free software
ICD loader Version 2.2.11
ICD loader Profile OpenCL 2.1
root#406231114801:/src# clinfo
Number of platforms 1
Platform Name Intel Gen OCL Driver
Platform Vendor Intel
Platform Version OpenCL 2.0 beignet 1.3
Platform Profile FULL_PROFILE
Platform Extensions cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_byte_addressable_store cl_khr_3d_image_writes cl_khr_image2d_from_buffer cl_khr_depth_images cl_khr_spir cl_khr_icd cl_intel_accelerator cl_intel_subgroups cl_intel_subgroups_short cl_khr_gl_sharing
Platform Extensions function suffix Intel
Platform Name Intel Gen OCL Driver
Number of devices 1
Device Name Intel(R) HD Graphics Cherryview
Device Vendor Intel
Device Vendor ID 0x8086
Device Version OpenCL 1.2 beignet 1.3
Driver Version 1.3
Device OpenCL C Version OpenCL C 1.2 beignet 1.3
Device Type GPU
Device Profile FULL_PROFILE
Device Available Yes
Compiler Available Yes
Linker Available Yes
Max compute units 12
Max clock frequency 1000MHz
Device Partition (core)
Max number of sub-devices 1
Supported partition types None, None, None
Max work item dimensions 3
Max work item sizes 512x512x512
Max work group size 512
Preferred work group size multiple 16
Preferred / native vector sizes
char 16 / 8
short 8 / 8
int 4 / 4
long 2 / 2
half 0 / 8 (cl_khr_fp16)
float 4 / 4
double 0 / 2 (n/a)
Half-precision Floating-point support (cl_khr_fp16)
Denormals No
Infinity and NANs Yes
Round to nearest Yes
Round to zero No
Round to infinity No
IEEE754-2008 fused multiply-add No
Support is emulated in software No
Single-precision Floating-point support (core)
Denormals No
Infinity and NANs Yes
Round to nearest Yes
Round to zero No
Round to infinity No
IEEE754-2008 fused multiply-add No
Support is emulated in software No
Correctly-rounded divide and sqrt operations No
Double-precision Floating-point support (n/a)
Address bits 32, Little-Endian
Global memory size 2147483648 (2GiB)
Error Correction support No
Max memory allocation 1610612736 (1.5GiB)
Unified memory for Host and Device Yes
Minimum alignment for any data type 128 bytes
Alignment of base address 1024 bits (128 bytes)
Global Memory cache type Read/Write
Global Memory cache size 8192 (8KiB)
Global Memory cache line size 64 bytes
Image support Yes
Max number of samplers per kernel 16
Max size for 1D images from buffer 65536 pixels
Max 1D or 2D image array size 2048 images
Base address alignment for 2D image buffers 4096 bytes
Pitch alignment for 2D image buffers 1 pixels
Max 2D image size 8192x8192 pixels
Max 3D image size 8192x8192x2048 pixels
Max number of read image args 128
Max number of write image args 8
Local memory type Local
Local memory size 65536 (64KiB)
Max number of constant args 8
Max constant buffer size 134217728 (128MiB)
Max size of kernel argument 1024
Queue properties
Out-of-order execution No
Profiling Yes
Prefer user sync for interop Yes
Profiling timer resolution 80ns
Execution capabilities
Run OpenCL kernels Yes
Run native kernels Yes
SPIR versions 1.2
printf() buffer size 1048576 (1024KiB)
Built-in kernels __cl_copy_region_align4;__cl_copy_region_align16;__cl_cpy_region_unalign_same_offset;__cl_copy_region_unalign_dst_offset;__cl_copy_region_unalign_src_offset;__cl_copy_buffer_rect;__cl_copy_image_1d_to_1d;__cl_copy_image_2d_to_2d;__cl_copy_image_3d_to_2d;__cl_copy_image_2d_to_3d;__cl_copy_image_3d_to_3d;__cl_copy_image_2d_to_buffer;__cl_copy_image_3d_to_buffer;__cl_copy_buffer_to_image_2d;__cl_copy_buffer_to_image_3d;__cl_fill_region_unalign;__cl_fill_region_align2;__cl_fill_region_align4;__cl_fill_region_align8_2;__cl_fill_region_align8_4;__cl_fill_region_align8_8;__cl_fill_region_align8_16;__cl_fill_region_align128;__cl_fill_image_1d;__cl_fill_image_1d_array;__cl_fill_image_2d;__cl_fill_image_2d_array;__cl_fill_image_3d;
Device Extensions cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_byte_addressable_store cl_khr_3d_image_writes cl_khr_image2d_from_buffer cl_khr_depth_images cl_khr_spir cl_khr_icd cl_intel_accelerator cl_intel_subgroups cl_intel_subgroups_short cl_khr_gl_sharing cl_khr_fp16
NULL platform behavior
clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...) Intel Gen OCL Driver
clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...) Success [Intel]
clCreateContext(NULL, ...) [default] Success [Intel]
clCreateContextFromType(NULL, CL_DEVICE_TYPE_DEFAULT) Success (1)
Platform Name Intel Gen OCL Driver
Device Name Intel(R) HD Graphics Cherryview
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU) Success (1)
Platform Name Intel Gen OCL Driver
Device Name Intel(R) HD Graphics Cherryview
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM) No devices found in platform
clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL) Success (1)
Platform Name Intel Gen OCL Driver
Device Name Intel(R) HD Graphics Cherryview
ICD loader properties
ICD loader Name OpenCL ICD Loader
ICD loader Vendor OCL Icd free software
ICD loader Version 2.2.11
ICD loader Profile OpenCL 2.1
How can I solve the issue?
According to these supported platforms information, your GPU currently might not supported. Could you run the programs on CPU? Try running this command " lspci | grep -i vga " and share the output here.
As you can see in the below command I have assigned a total of 500 GB disk space to my VM. But I am seeing 14.4 GB actual space available to the disk and once it gets used completely. I got an error there isn't much space to use? How to extend space for /dev/mapper/centos-root.
I am using VMware ESXi and using centOS for this VM.
[root#localhost Apr]# fdisk -l
Disk /dev/sda: 536.9 GB, 536870912000 bytes, 1048576000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x00064efd
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 33554431 15727616 8e Linux LVM
Disk /dev/mapper/centos-root: 14.4 GB, 14382268416 bytes, 28090368 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/centos-swap: 1719 MB, 1719664640 bytes, 3358720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 byte
Execute bellow Steps to increase your Linux Disk after adding space in VMWare :
Step 1 - update partition table
fdisk /dev/sda
Press p to print the partition table to identify the number of partitions.
Press n to create a new primary partition.
Press p for primary.
Press 3 for the partition number, depending on the output of the partition table print.
Press Enter two times.
Press t to change the system's partition ID.
Press 3 to select the newly creation partition.
Type 8e to change the Hex Code of the partition for Linux LVM.
Press w to write the changes to the partition table.
Step 2 - Restart the virtual machine.
Step 3 - verify that the changes were saved
fdisk -l
Step 4 - convert the new partition to a physical volume
pvcreate /dev/sda3
Step 5 - extend the physical volume (centos is your VG name, if not use your VG name in place of centos )
vgextend centos /dev/sda3
Step 6 - extend the Logical Volume (500G is the size you want to add , if not use the right size in place of 500G)
lvextend -L+500G /dev/mapper/centos-root
Step 7 - expand the ext filesystem online
resize2fs /dev/mapper/centos-root
extend disk without reboot
echo 1 > /sys/block/sda/device/rescan
echo 1 > /sys/block/sdb/device/rescan
echo 1 > /sys/block/nvme0n1/device/rescan_controller
partprobe
gdisk fix warnging
parted change partion size
## parted can executed as command line. but this is very dangerous
parted -s /dev/sdb "resizepart 2 -1" quit
parted -s /dev/sdb "resizepart 3 100%" quit
resizepart 3 100%
pvresize /dev/sda3
lvextend -l +100%FREE cs/root
xfs_growfs /dev/cs/root
I am using stm32mp157c-dk2 board and I added the RNDIS gadget to the config file. When I run u-boot on the board I get "No ethernet found". This is the log of the boot:
U-Boot SPL 2018.11-stm32mp-r2.1-00026-g161ca183f1-dirty (Jan 31 2020 - 12:34:38 +0200)
Model: STMicroelectronics STM32MP157C-DK2 Discovery Board
RAM: DDR3-1066/888 bin G 1x4Gb 533MHz v1.41
Trying to boot from MMC1
U-Boot 2018.11-stm32mp-r2.1-00026-g161ca183f1-dirty (Jan 31 2020 - 12:34:38 +0200)
CPU: STM32MP157CAC Rev.B
Model: STMicroelectronics STM32MP157C-DK2 Discovery Board
Board: stm32mp1 in basic mode (st,stm32mp157c-dk2)
Board: MB1272 Var2 Rev.C-01
DRAM: 512 MiB
Clocks:
- MPU : 650 MHz
- MCU : 208.878 MHz
- AXI : 266.500 MHz
- PER : 24 MHz
- DDR : 533 MHz
*******************************************
* WARNING 500mA power supply detected *
* Current too low, use a 3A power supply! *
*******************************************
NAND: 0 MiB
MMC: STM32 SDMMC2: 0, STM32 SDMMC2: 1
Loading Environment from EXT4... OK
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
Boot over mmc0!
Do you have any suggestions? thanks for helpers!
That big warning about too small of a power supply is the first thing to look at. A lack of power tends to lead to not all blocks of the SoC being used / available.
I am very newbie in OrangePI PC. I have installed it by dd on my macOS, and I have tried installing a Raspbian image which downloaded from the orangepi.org in Windows as well, after installation when I check free disk space it is showing:
root#orangepi:~# df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 3.4G 2.7G 474M 86% /
/dev/root 3.4G 2.7G 474M 86% /
devtmpfs 374M 0 374M 0% /dev
tmpfs 101M 188K 101M 1% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 201M 0 201M 0% /run/shm
/dev/mmcblk0p1 41M 4.9M 37M 12% /boot
I have installed it on 32G flash drive. But when I check it through fdisk command it shows 32G as a disk size:
root#orangepi:~# sudo fdisk -l
Disk /dev/mmcblk0: 32.0 GB, 32010928128 bytes
4 heads, 16 sectors/track, 976896 cylinders, total 62521344 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x34605ba5
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 40960 124927 41984 83 Linux
/dev/mmcblk0p2 124928 7170047 3522560 83 Linux
root#orangepi:~#
How to fix this?
This solved my problem (solution is taken from here):
root#orangepi:~# fdisk /dev/mmcblk0
Command (m for help): p
Disk /dev/mmcblk0: 15.8 GB, 15804137472 bytes
4 heads, 16 sectors/track, 482304 cylinders, total 30867456 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x34605ba5
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 40960 124927 41984 83 Linux
/dev/mmcblk0p2 124928 7170047 3522560 83 Linux
Command (m for help): d
Partition number (1-4): 2
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (1-4, default 2): 2
First sector (2048-30867455, default 2048): 124928
Last sector, +sectors or +size{K,M,G} (124928-30867455, default 30867455):
Using default value 30867455
Command (m for help): w
Then quit (command q), reboot. You will then be able to use resize:
resize2fs /dev/root
I am trying to allocate ram with xms = xmx on a sles10 x64 running under VMware.
When stopping the JVM the following error is thrown:
Java HotSpot(TM) 64-Bit Server VM warning: Failed to reserve shared memory (errno = 12).
The RAM of the VM is 8 GB and they are reserved.
The VM sees 8GB and it can be allocated during runtime via the XMX setting.
On another Virtual SLES10 with 16 GB RAM Reserved via VMWare I don't have a problem with allocation of RAM even when setting the hugepages and shmax only by echo it works fine.
echo 8000 > /proc/sys/vm/nr_hugepages
echo 8589934592 > /proc/sys/kernel/shmmax
Using the echo commands on the other SLES10 show no effect in /proc/meminfo at all.
here are my configs 1st on is the SLES10 where XMS fails to allocate.
# more /apps/liferay-portal-5.2.5/tomcat-5.5.27/bin/setenv.sh
JAVA_HOME=/apps/java5
JRE_HOME=/apps/java5
JAVA_OPTS="$JAVA_OPTS -Xms3G -Xmx3G -XX:NewRatio=3 -XX:MaxPermSize=256m -XX:SurvivorRatio=20 -Dsun.rmi.dgc.client.gcInterval=1800000 -Dsun.rmi.dgc.server.gcInterval=1800000 -XX:+UsePa
rallelGC -XX:ParallelGCThreads=4 -XX:+UseLargePages -Xloggc:/apps/gc.log -XX:+PrintGCApplicationStoppedTime -XX:+PrintGCApplicationConcurrentTime -XX:+PrintGC -XX:+PrintGCTimeStamps -
XX:+PrintGCDetails -Dfile.encoding=UTF8 -Duser.timezone=GMT+2 -Djava.security.auth.login.config=$CATALINA_HOME/conf/jaas.config -Dorg.apache.catalina.loader.WebappClassLoader.ENABLE_C
LEAR_REFERENCES=false"
more /etc/sysctl.conf
kernel.shmmax=7516192768
vm.nr_hugepages=3072
vm.hugetlb_shm_group=1000
more /etc/securtiy/limits.conf
#
#
#* soft core 0
#* hard rss 10000
##student hard nproc 20
##faculty soft nproc 20
##faculty hard nproc 50
#ftp hard nproc 0
##student - maxlogins 4
* soft memlock unlimited
* hard memlock unlimited
tomcat soft memlock 6291456
tomcat hard memlock 6291456
# End of file
# cat /proc/meminfo
MemTotal: 7928752 kB
MemFree: 737004 kB
Buffers: 0 kB
Cached: 417368 kB
SwapCached: 0 kB
Active: 487428 kB
Inactive: 324072 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 7928752 kB
LowFree: 737004 kB
SwapTotal: 2097144 kB
SwapFree: 2097020 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 397208 kB
Mapped: 72180 kB
Slab: 62136 kB
CommitLimit: 2915792 kB
Committed_AS: 748576 kB
PageTables: 3292 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 7028 kB
VmallocChunk: 34359731271 kB
HugePages_Total: 3072
HugePages_Free: 2305
HugePages_Rsvd: 897
Hugepagesize: 2048 kB
# ipcs -l
Shared Memory Limits --------
max number of segments = 4096
max seg size (kbytes) = 7340032
max total shared memory (kbytes) = 4611686018427386880
min seg size (bytes) = 1
Semaphore Limits --------
max number of arrays = 1024
max semaphores per array = 250
max semaphores system wide = 256000
max ops per semop call = 32
semaphore max value = 32767
Messages: Limits --------
max queues system wide = 16
max size of message (bytes) = 65536
default max size of queue (bytes) = 65536
# ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
pending signals (-i) 65536
max locked memory (kbytes, -l) unlimited
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 65536
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
On the Second VM it looks like this
cat /proc/meminfo
MemTotal: 16190448 kB
MemFree: 176812 kB
Buffers: 52752 kB
Cached: 755256 kB
SwapCached: 0 kB
Active: 713808 kB
Inactive: 425300 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 16190448 kB
LowFree: 176812 kB
SwapTotal: 35658896 kB
SwapFree: 35658796 kB
Dirty: 932 kB
Writeback: 0 kB
AnonPages: 333620 kB
Mapped: 79120 kB
Slab: 37492 kB
CommitLimit: 36356744 kB
Committed_AS: 646284 kB
PageTables: 3584 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 23500 kB
VmallocChunk: 34359713907 kB
HugePages_Total: 7224
HugePages_Free: 6654
HugePages_Rsvd: 582
Hugepagesize: 2048 kB
JAVA_OPTS="$JAVA_OPTS -Xms2G -Xmx2G -XX:NewRatio=3 -XX:MaxPermSize=256m -XX:SurvivorRatio=20 -Dsun.rmi.dgc.client.gcInterval=1800000 -Dsun.rmi.dgc.server.gcI
nterval=1800000 -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -Xloggc:/apps/gc.log -XX:+PrintGCApplicationStoppedTime -XX:+PrintGCApplication
ConcurrentTime -XX:+PrintGC -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -Dfile.encoding=UTF8 -Duser.timezone=GMT+2 -Djava.security.auth.login.config=$CATALINA
_HOME/conf/jaas.config -Dorg.apache.catalina.loader.WebappClassLoader.ENABLE_CLEAR_REFERENCES=false"
hepide01pep1:~ # ipcs -l
------ Shared Memory Limits --------
max number of segments = 4096
max seg size (kbytes) = 8388608
max total shared memory (kbytes) = 4611686018427386880
min seg size (bytes) = 1
------ Semaphore Limits --------
max number of arrays = 1024
max semaphores per array = 250
max semaphores system wide = 256000
max ops per semop call = 32
semaphore max value = 32767
------ Messages: Limits --------
max queues system wide = 16
max size of message (bytes) = 65536
default max size of queue (bytes) = 65536
Did you tried with the less size of heap.. may be with 2gig. You can just do simple try with
java -Xmx3G -version .Let us know how it goes and what it spit out.
I have stumbled with this issue (errno 12) on CentOS 5.9 as well using 16G heaps.
After verifying hard / soft memory locks were unlimited in /etc/security/limits.conf and still getting the error, I started running java -version as suggested by Anil, with all of my JAVA_OPTS intact.
I have found that removing the "-XX:+UseLargePages" option gets rid of that error.
I hope this helps you!