What is the time Complexity for below code:
1)
function(values,xlist,ylist):
sum =0
n=0
for r from 0 to xlist:
for c from 0 to ylist:
sum+= values[r][c]
n+1
return sum/n
2)
function PrintCharacters():
characters= {"a","b","c","d"}
foreach character in characters
print(character)
According to me the 1st code has O(xlist*ylist) complexity and 2nd code has O(n).
Is this right?
Big O notation to describe the asymptotic behavior of functions. Basically, it tells you how fast a function grows or declines
For example, when analyzing some algorithm, one might find that the time (or the number of steps) it takes to complete a problem of size n is given by
T(n) = 4 n^2 - 2 n + 2
If we ignore constants (which makes sense because those depend on the particular hardware the program is run on) and slower growing terms, we could say "T(n)" grows at the order of n^2 " and write:T(n) = O(n^2)
For the formal definition, suppose f(x) and g(x) are two functions defined on some subset of the real numbers. We write
f(x) = O(g(x))
(or f(x) = O(g(x)) for x -> infinity to be more precise) if and only if there exist constants N and C such that
|f(x)| <= C|g(x)| for all x>N
Intuitively, this means that f does not grow faster than g
If a is some real number, we write
f(x) = O(g(x)) for x->a
if and only if there exist constants d > 0 and C such that
|f(x)| <= C|g(x)| for all x with |x-a| < d
So for your case it would be
O(n) as |f(x)| > C|g(x)|
Reference from http://web.mit.edu/16.070/www/lecture/big_o.pdf
for r from 0 to xlist: // --> n time
for c from 0 to ylist: // n time
sum+= values[r][c]
n+1
}
function PrintCharacters():
characters= {"a","b","c","d"}
foreach character in characters --> # This loop will run as many time as there are characters suppose n characters than it will run time so O(n)
print(character)
Big O Notation gives an assumption when value is very big outer loop
will run n times and inner loop is running n times
Assume n -> 100 than total n^2 10000 run times
Related
I'm having trouble figuring out the time complexity of the following code.
for i in range(0,n):
x = 1
while x < n:
x = x * 2
I understand that the outer for loop runs n times, and that the while loop runs log n times (I think). So does that mean because outer for loop has more of an impact so the run time is o(n)?
It's O(n * log(n)).
The outer loop is running n times and each time it runs it runs the inner loop. The inner loop is indeed O(log n). To see this imagine n being a power of 2. If n is 4,
x = 1
while x < n:
x = x * 2
will iterate twice, once when x is 1 and once when x is 2. If n is 8, this loop will iterate 3 times (on x = 1, 2, and 4). Note that 2^2 is four and 2^3 is eight. The number of iterations is the exponent; you could prove this by mathematical induction if you want to be rigorous. We can get that exponent by taking the base-2 log of n but by the definition the asymptotic notation we can ignore the base and just say that the loop above runs in O(log n) time.
If we have a loop that runs in O(log n) that we are running O(n) times we can say that the whole thing runs in O(n * log(n)) time.
I have an integer, N.
I denote f[i] = number of appearances of the digit i in N.
Now, I have the following algorithm.
FOR i = 0 TO 9
FOR j = 1 TO f[i]
k = k*10 + i;
My teacher said this is O(N). It seems to me more like a O(logN) algorithm.
Am I missing something?
I think that you and your teacher are saying the same thing but it gets confused because the integer you are using is named N but it is also common to refer to an algorithm that is linear in the size of its input as O(N). N is getting overloaded as the specific name and the generic figure of speech.
Suppose we say instead that your number is Z and its digits are counted in the array d and then their frequencies are in f. For example, we could have:
Z = 12321
d = [1,2,3,2,1]
f = [0,2,2,1,0,0,0,0,0,0]
Then the cost of going through all the digits in d and computing the count for each will be O( size(d) ) = O( log (Z) ). This is basically what your second loop is doing in reverse, it's executing one time for each occurence of each digits. So you are right that there is something logarithmic going on here -- the number of digits of Z is logarithmic in the size of Z. But your teacher is also right that there is something linear going on here -- counting those digits is linear in the number of digits.
The time complexity of an algorithm is generally measured as a function of the input size. Your algorithm doesn't take N as an input; the input seems to be the array f. There is another variable named k which your code doesn't declare, but I assume that's an oversight and you meant to initialise e.g. k = 0 before the first loop, so that k is not an input to the algorithm.
The outer loop runs 10 times, and the inner loop runs f[i] times for each i. Therefore the total number of iterations of the inner loop equals the sum of the numbers in the array f. So the complexity could be written as O(sum(f)) or O(Σf) where Σ is the mathematical symbol for summation.
Since you defined that N is an integer which f counts the digits of, it is in fact possible to prove that O(Σf) is the same thing as O(log N), so long as N must be a positive integer. This is because Σf equals how many digits the number N has, which is approximately (log N) / (log 10). So by your definition of N, you are correct.
My guess is that your teacher disagrees with you because they think N means something else. If your teacher defines N = Σf then the complexity would be O(N). Or perhaps your teacher made a genuine mistake; that is not impossible. But the first thing to do is make sure you agree on the meaning of N.
I find your explanation a bit confusing, but lets assume N = 9075936782959 is an integer. Then O(N) doesn't really make sense. O(length of N) makes more sense. I'll use n for the length of N.
Then f(i) = iterate over each number in N and sum to find how many times i is in N, that makes O(f(i)) = n (it's linear). I'm assuming f(i) is a function, not an array.
Your algorithm loops at most:
10 times (first loop)
0 to n times, but the total is n (the sum of f(i) for all digits must be n)
It's tempting to say that algorithm is then O(algo) = 10 + n*f(i) = n^2 (removing the constant), but f(i) is only calculated 10 times, each time the second loops is entered, so O(algo) = 10 + n + 10*f(i) = 10 + 11n = n. If f(i) is an array, it's constant time.
I'm sure I didn't see the problem the same way as you. I'm still a little confused about the definition in your question. How did you come up with log(n)?
Why is the growth of n^1.001 greater than n log n in Big O notation?
The n^0.001 doesn't seem significant...
For any exponent (x) greater than 1, nx is eventually greater than n * log(n). In the case of x = 1.001, the n in question is unbelievably large. Even if you lower x to 1.01, nx doesn't get bigger than n * log(n) until beyond n = 1E+128 (but before you reach 1E+256).
So, for problems where n is less than astronomical, n1.001 will be less than n * log(n), but you will eventually reach a point where it will be greater.
In case someone is interested, here is a formal proof:
For the sake of simplicity, let's assume we are using logarithms in base e.
Let a > 1 be any exponent (e.g., a = 1.001). Then a-1 > 0. Now consider the function
f(x) = x^(a-1)/log(x)
Using L'Hôpital's rule it is not hard to see that this function is unbounded. Moreover, computing the derivative of f(x), one can also see that the function is increasing for x > exp(1/(a-1)).
Therefore, there must exist an integer N such that, for all n > N, is f(n) > 1. In other words
n^(a-1)/log(n) > 1
or
n^(a-1) > log(n)
so
n^a > n log(n).
This shows that O(n^a) >= O(n log(n)).
But wait a minute. We wanted >, not >=, right? Fortunately this is easy to see. For instance, in the case a = 1.001, we have
O(n^1.001) > O(n^1.0001) >= O(n log(n))
and we are done.
Suppose we have an algorithm that is of order O(2^n). Furthermore, suppose we multiplied the input size n by 2 so now we have an input of size 2n. How is the time affected? Do we look at the problem as if the original time was 2^n and now it became 2^(2n) so the answer would be that the new time is the power of 2 of the previous time?
Big 0 is not for telling you the actual running time, just how the running time is affected by the size of input. If you double the size of input the complexity is still O(2^n), n is just bigger.
number of elements(n) units of work
1 1
2 4
3 8
4 16
5 32
... ...
10 1024
20 1048576
There's a misunderstanding here about how Big-O relates to execution time.
Consider the following formulas which define execution time:
f1(n) = 2^n + 5000n^2 + 12300
f2(n) = (500 * 2^n) + 6
f3(n) = 500n^2 + 25000n + 456000
f4(n) = 400000000
Each of these functions are O(2^n); that is, they can each be shown to be less than M * 2^n for an arbitrary M and starting n0 value. But obviously, the change in execution time you notice for doubling the size from n1 to 2 * n1 will vary wildly between them (not at all in the case of f4(n)). You cannot use Big-O analysis to determine effects on execution time. It only defines an upper boundary on the execution time (which is not even guaranteed to be the minimum form of the upper bound).
Some related academia below:
There are three notable bounding functions in this category:
O(f(n)): Big-O - This defines a upper-bound.
Ω(f(n)): Big-Omega - This defines a lower-bound.
Θ(f(n)): Big-Theta - This defines a tight-bound.
A given time function f(n) is Θ(g(n)) only if it is also Ω(g(n)) and O(g(n)) (that is, both upper and lower bounded).
You are dealing with Big-O, which is the usual "entry point" to the discussion; we will neglect the other two entirely.
Consider the definition from Wikipedia:
Let f and g be two functions defined on some subset of the real numbers. One writes:
f(x)=O(g(x)) as x tends to infinity
if and only if there is a positive constant M such that for all sufficiently large values of x, the absolute value of f(x) is at most M multiplied by the absolute value of g(x). That is, f(x) = O(g(x)) if and only if there exists a positive real number M and a real number x0 such that
|f(x)| <= M|g(x)| for all x > x0
Going from here, assume we have f1(n) = 2^n. If we were to compare that to f2(n) = 2^(2n) = 4^n, how would f1(n) and f2(n) relate to each other in Big-O terms?
Is 2^n <= M * 4^n for some arbitrary M and n0 value? Of course! Using M = 1 and n0 = 1, it is true. Thus, 2^n is upper-bounded by O(4^n).
Is 4^n <= M * 2^n for some arbitrary M and n0 value? This is where you run into problems... for no constant value of M can you make 2^n grow faster than 4^n as n gets arbitrarily large. Thus, 4^n is not upper-bounded by O(2^n).
See comments for further explanations, but indeed, this is just an example I came up with to help you grasp Big-O concept. That is not the actual algorithmic meaning.
Suppose you have an array, arr = [1, 2, 3, 4, 5].
An example of a O(1) operation would be directly access an index, such as arr[0] or arr[2].
An example of a O(n) operation would be a loop that could iterate through all your array, such as for elem in arr:.
n would be the size of your array. If your array is twice as big as the original array, n would also be twice as big. That's how variables work.
See Big-O Cheat Sheet for complementary informations.
I'm unsure of the general time complexity of the following code.
Sum = 0
for i = 1 to N
if i > 10
for j = 1 to i do
Sum = Sum + 1
Assuming i and j are incremented by 1.
I know that the first loop is O(n) but the second loop is only going to run when N > 10. Would the general time complexity then be O(n^2)? Any help is greatly appreciated.
Consider the definition of Big O Notation.
________________________________________________________________
Let f: ℜ → ℜ and g: ℜ → ℜ.
Then, f(x) = O(g(x))
⇔
∃ k ∈ ℜ ∋ ∃ M > 0 ∈ ℜ ∋ ∀ x ≥ k, |f(x)| ≤ M ⋅ |g(x)|
________________________________________________________________
Which can be read less formally as:
________________________________________________________________
Let f and g be functions defined on a subset of the real numbers.
Then, f is O of g if, for big enough x's (this is what the k is for in the formal definition) there is a constant M (from the real numbers, of course) such that M times g(x) will always be greater than or equal to (really, you can just increase M and it will always be greater, but I regress) f(x).
________________________________________________________________
(You may note that if a function is O(n), then it is also O(n²) and O(e^n), but of course we are usually interested in the "smallest" function g such that it is O(g). In fact, when someone says f is O of g then they almost always mean that g is the smallest such function.)
Let's translate this to your problem. Let f(N) be the amount of time your process takes to complete as a function of N. Now, pretend that addition takes one unit of time to complete (and checking the if statement and incrementing the for-loop take no time), then
f(1) = 0
f(2) = 0
...
f(10) = 0
f(11) = 11
f(12) = 23
f(13) = 36
f(14) = 50
We want to find a function g(N) such that for big enough values of N, f(N) ≤ M ⋅g(N). We can satisfy this by g(N) = N² and M can just be 1 (maybe it could be smaller, but we don't really care). In this case, big enough means greater than 10 (of course, f is still less than M⋅g for N <11).
tl;dr: Yes, the general time complexity is O(n²) because Big O assumes that your N is going to infinity.
Let's assume your code is
Sum = 0
for i = 1 to N
for j = 1 to i do
Sum = Sum + 1
There are N^2 sum operations in total. Your code with if i > 10 does 10^2 sum operations less. As a result, for enough big N we have
N^2 - 10^2
operations. That is
O(N^2) - O(1) = O(N^2)