I would like to compare values(string ) stored in two variable, just like we can compare a variable with a string using like operator
So basically i would like to use "like "operator and have two variable contents comparison or get simililar functionality .
Below is the snippet of the code . Please guide me
If ( nametwo Like " * " & monthname & " * " ) OR ( nametwo Like " * " & yearname& " * " ) Then
'some action
Endif
Note : nametwo , monthname and yearname are string variables
The Answer to the question was proper spacing
If (nametwo Like "*" & monthname & "*") And (nametwo Like "*" & yearname & "*") Then
csworksheetcount = ws.Index
End If
Related
The goal of the query at the bottom is to update the FullComplDate field if the below requirements are satisfied. I am not sure if it is an issue with the arrangement of the statements or parenthesis but I've tried changing the order of the statements and adding parenthesis but no luck.
BOTH of these statements are true:
tblSubscribers.FullComplDate Is Null
tblSubscribers.SubscrComplDate Is Not Null
AND either one of these two statements are true:
tblSubscribers.CoverageLevel="Employee Only"))
tblSubscribers.CoverageLevel="Employee + Child(ren)"
Instead, what is happening is that any record that satisfies that first three statements is being updated AND any record the satisfies just the 4th statement is being updated.
UPDATE tblSubscribers SET tblSubscribers.FullComplDate = Format(Date(),"mmmm" & " " & "yyyy")
WHERE (((tblSubscribers.FullComplDate) Is Null) AND ((tblSubscribers.SubscrComplDate) Is Not Null) AND (((tblSubscribers.CoverageLevel)="Employee Only")) OR (((tblSubscribers.CoverageLevel)="Employee + Child(ren)")));
I think the issues is with the parenthesis.... if you recude them and only have them wrapping the OR condition it should work better.
UPDATE tblSubscribers SET tblSubscribers.FullComplDate = Format(Date(),"mmmm" & " " & "yyyy")
WHERE tblSubscribers.FullComplDate Is Null
AND tblSubscribers.SubscrComplDate Is Not Null
AND (tblSubscribers.CoverageLevel="Employee Only" OR tblSubscribers.CoverageLevel ="Employee + Child(ren)")
You could try the IN Clause to avoid the OR
UPDATE tblSubscribers SET tblSubscribers.FullComplDate = Format(Date(),"mmmm" & " " & "yyyy")
WHERE tblSubscribers.FullComplDate Is Null
AND tblSubscribers.SubscrComplDate Is Not Null
AND tblSubscribers.CoverageLevel IN ("Employee Only" ,"Employee + Child(ren)")
The following should work (note brackets wrapping last AND/OR):
UPDATE tblSubscribers
SET tblSubscribers.FullComplDate = Format(Date(),"mmmm" & " " & "yyyy")
WHERE tblSubscribers.FullComplDate Is Null
AND tblSubscribers.SubscrComplDate Is Not Null
AND (tblSubscribers.CoverageLevel = "Employee Only"
OR tblSubscribers.CoverageLevel = "Employee + Child(ren)")
In my GUI, I have several ways to filter a database. Due to my lack of knowledge, my VBA programming has exploded with nested IF statements. I am getting better at using ACCESS now, and would like to find a more succinct way to perform multiple filters. My form is continuous.
Is there a simple way to do the following task (I made a toy model example):
I have a combo box SITE where I can filter by work sites A, B, C. After filtering by SITE, I have three check boxes where the user can then filter by item number 1-10, 11-20, 21-30, depending on what the user selects.
Is there a way to append multiple filters (or filter filtered data)? For example, filter by SITE A, then filter A by item number 1-10?
Currently, for EACH check box, I then have an IF statement for each site. Which I then use Form.Filter = . . . And . . . and Form.FilterOn = True.
Can I utilize SQL on the property sheet to filter as opposed to using the VBA?
What I do for these types of filters is to construct a SQL statement whenever one of the filter controls is changed. All of them reference the same subroutine to save on code duplication.
What you do with this SQL statement depends on what you're trying to do. Access is pretty versatile with it; use it as a RecordSource, straight execute it, and use the results for something else, even just printing it to a label.
To try to modularize the process, here's an example of how I do it:
Dim str As String
str = "SELECT * FROM " & Me.cListBoxRowSource
Me.Field1.SetFocus
If Me.Field1.Text <> "" Then
str = AppendNextFilter(str)
str = str & " SQLField1 LIKE '*" & Me.Field1.Text & "*'"
End If
Me.Field2.SetFocus
If Me.Field2.Text <> "" Then
str = AppendNextFilter(str)
str = str & " SQLField2 LIKE '*" & Me.Field2.Text & "*'"
End If
Me.Field3.SetFocus
If Me.Field3.Text <> "" Then
str = AppendNextFilter(str)
str = str & " SQLField3 LIKE '*" & Me.Field3.Text & "*'"
End If
Me.cListBox.RowSource = str
Variables edited to protect the guilty.
My AppendNextFilter method just checks to see if WHERE exists in the SQL statement already. If it does, append AND. Otherwise, append WHERE.
Making quite a few assumptions (since you left out a lot of info in your question), you can do something like this:
Dim sSql as String
sSql = "Select * from MyTable"
Set W = Me.cboSite.Value
sSql = sSql & " WHERE MySite = " & W & ""
Set X = Me.Chk1
Set Y = Me.Chk2
Set Z = Me.Chk3
If X = True Then
sSql = sSql & " And MyItem between 1 and 10"
If Y = True Then
sSql = sSql & " And MyItem between 11 and 20"
If Z = True Then
sSql = sSql & " And MyItem between 21 and 30"
End If
DoCmd.ExecuteSQL sSql
Again, this is entirely "air code", unchecked and probably needing some edits as I haven't touched Access in some time and my VBA is likely rusty. But it should put you on the right track.
The way i use combobox filtering in access is first I design a Query that contains all the data to be filtered. The Query must contain fields to be used for filtering. QueryAllData => "SELECT Table.Site, Table.ItemNumber, FROM Table;" Then make a copy of the query and Name it QueryFilteredData and Design the report to display the data using QueryFilteredData.
Then create a form with a Site ComboBox, ItemNumber Combo Box, and Sub Report Object and Assign SourceObject the Report Name. Use Value List as the combo box Row Source type and type in the values for Row Source to get it working. To get the report to update I always unassign the SubReport.SourceOject update the QueryFilteredData and then Reassign the SubReport.SourceObject
Combobox_Site_AfterUpdate()
Combobox_ItemNumber_AfterUpdate
End Sub
Combobox_ItemNumber_AfterUpdate()
Select Case Combobox_ItemNumber.value
Case Is = "1-10"
Store_Filters 1,10
Case Is = "11-20"
Store_Filters 11,20
Case Is = "21-30"
Store_Filters 21,30
Case Else
Store_Filters 1,10
End Sub
Private Sub Store_Filters(Lowest as integer, Highest as integer)
Dim SRpt_Recset As Object
Dim Temp_Query As Variant
Dim Temp_SourceObject as Variant
Temp_SourceObject = SubReport.SourceObject
SubReport.SourceObject =""
Set SRpt_Recset = CurrentDb.QueryDefs("QueryFilteredData")
Filter_Combo_Box1 = " ((QueryAllData.[Sites])= " & Chr(39) & Combo_Box1 & Chr(39) & ") "
Filter_Combo_Box2 = (Filter_Combo_Box1 AND (QueryAllData.ItemNumber <= Highest)) OR (Filter_Combo_Box1 AND (QueryAllData.ItemNumber >= Lowest));"
Temp_Query = " SELECT " & Query_Name & ".* " & _
"FROM " & Query_Name & " " & _
"WHERE (" & Filter_Combo_Box2 & ") ORDER BY [Field_Name_For_Sorting];"
SRpt_Recset.SQL = Temp_Query
'Debug.print Temp_Query
SubReport.SourceObject = Temp_SourceObject
End Sub
After the Combo Boxes Work if the Data is going to Change like Site and Item Number then you might want to change the Row Source of the combo boxes to Use a Query that uses Select Distinct Site From QueryAllData. I don't know if Filter_Combo_Box2 step so it may need some correction. Hope this helps.
I am attempting to build a form ,called UI, that users will select a dimension parameter from a combobox "cmbFilter" and then add a +/- tolerance in a text box "txtTolerance". After selection a part number from a list this should return results for similar part numbers in the the tolorence range for that parameter. The field names in the table are the dimension parameters and are .AddItem to the combobox in the form load code.
Example. Part#1 OD is 5, so I select "OD" as the search parameter then I set a tolerance to +/- 1. The results should show Part#2 with a OD of 6 but not Part#3 with a OD of 7.
I have set a listboxs row source to the query but
no matter what I change in the syntax in this code I get operation or syntax errors. So I assume Im not referencing the form control right, or my logic isn't right?
I have tired the following code in the SQL design view in access.
SQL
SELECT Part_Matrix.Part_Number, Part_Matrix.Customer, Part_Matrix.Large_OD, Part_Matrix.Vent_Opening, & _
Part_Matrix.BPT, Part_Matrix.MFT, Part_Matrix.PD, Part_Matrix.Hat_ID, Part_Matrix.Microfinish, & _
Part_Matrix.Turn_Operations, Part_Matrix.Stud_Holes, Part_Matrix.SH_Dimensions, Part_Matrix.Manufacturer_Holes, & _
Part_Matrix.MH_Dimensions, Part_Matrix.Other_Holes, Part_Matrix.Other_Dimension
FROM Part_Matrix
WHERE [Forms]![UI]![cmbFilter]
BETWEEN (((SELECT [Forms]![UI]![cmbFilter] FROM Part_Matrix WHERE Part_Number = [Forms]![UI]![lbSelected]) - [Forms]![UI]![txtTolerance])
AND ((SELECT [Forms]![UI]![cmbFilter] FROM Part_Matrix WHERE Part_Number = [Forms]![UI]![lbSelected]) + [Forms]![UI]![txtTolerance]))
ORDER BY [Forms]![UI]![cmbFilter] DESC;
I have also tried to write the SQL code in access vba still no luck, the code below was just a simple text, I know its now the same logic as above.
Private Sub btnSearch_Click()
Dim SQL As String
If txtTolerance = "" Then
MsgBox ("No Tolerance Entered")
Exit Sub
ElseIf cmbFilter = "" Then
MsgBox ("No Filter Criteria Entered")
Exit Sub
Else
SQL = "SELECT Part_Matrix.[Part_Number], " & Me.cmbFilter & " " & _
"FROM Part_Matrix" & _
"ORDER BY " & Me.cmbFilter & " DESC;"
Debug.Print SQL
DoCmd.RunSQL SQL
lbFilterResults.RowSource = SQL
lbFilterResults.Requery
End If
End Sub
Try this, using a dlookup instead of SELECT to return the values you want in the BETWEEN statement. I believe the dlookup should return the value for whatever field you select in the combo box. Also, I've simplified to remove the forms!UI statement with a "me" assuming you are running code from the same form. Let me know if this works for ya.
intTarget = dlookup(me!CmbFilter, "PartMatrix", "Part_Number = " & me!LbSelected)
intLower = intTarget - me!txtTolerance
intUpper = intTarget + me!txtTolerance
strSQL = "SELECT * FROM Part_Matrix WHERE " & me!cmbFilter & " " & _
"BETWEEN " & intLower & " AND " & intUpper
In your BETWEEN statement, reference the table's [Large_OD] field and not the form'S.
i.e
WHERE Large_OD
BETWEEN (((SELECT Large_OD FROM Part_Matrix WHERE Part_Number = [Forms]![UI]![lbSelected]) - [Forms]![UI]![txtTolerance])
AND ((SELECT Large_OD FROM Part_Matrix WHERE Part_Number = [Forms]![UI]![lbSelected]) + [Forms]![UI]![txtTolerance]))
ORDER BY " & Me.cmbFilter & " DESC;
=IF(NOT(ISBLANK(VLOOKUP(Table1[Company Name],Billing_Info[#All],5,FALSE) & ", " &VLOOKUP(Table1[Company Name],Billing_Info[#All],6,FALSE) & " " &VLOOKUP(Table1[Company Name],Billing_Info[#All],7,FALSE),""))
What am I doing wrong - get wrong number of arguments? Trying to eliminate the comma if there is no data.
I can't make this simple command work:
Cells(l, 7).Formula = "=" & var1 & " * " & var2 & " * " & var3 & " / 252"
I can paste the inspected formula string value in Excel and it works as expected.
Cells(l,7) is a proper reference, as I can inspect its value.
Inspected formula on debug:
"=86710597,9409 * 0,02 * 0,35 / 252"
The problem is when a variable is represented as string it will have the system's decimal point. In your case it is a comma so you need to convert it to dot, for example using replace() function.