In these documentation from the serverless website - How to manage your AWS Step Functions with Serverless and GiTHUb - serverless-step-functions, we can find this word hellostepfunc1: in the serverless.yml file. I could not find reference to it. I dont understand what is it, and I can't find any reference to it, even after the State Machine was created into AWS.
If I delete it I get the follow error
Cannot use 'in' operator to search for 'role' in myStateMachine
But if I change its name for someName for example I have no error and the State Machine will works good.
I could assume it is only an identifier but I not sure.
Where can I find reference to it?
This is quite specific to the library you are using and how it names the statemachine which is getting created based upon whether the name: field is provided under the hellostepfunc1: or not.
Have a look at the testcases here and here to understand better.
In-short a .yaml like
stateMachines:
hellostepfunc1:
definition:
Comment: 'comment 1'
.....
has name of statemachine like hellostepfunc1StepFunctionsStateMachine as no name was specified.
Whereas for a .yaml like
stateMachines:
hellostepfunc1:
name: 'alpha'
definition:
Comment: 'comment 1'
.....
the name of statemachine is alpha as you had name was specified.
Related
I keep getting the error below when I use dbt run - I can't find anything on why this error occurs or how to fix it within the dbt documentation.
[WARNING]: Did not find matching node for patch with name 'vGenericView' in the 'models' section of file 'models\generic_schema\schema.sql'
did you by chance recently upgrade to dbt 1.0.0? If so, this means that you have a model, vGenericView defined in a schema.yml but you don't have a vGenericView.sql model file to which it corresponds.
If all views and tables defined in schema are 1 to 1 with model files then try to run dbt clean and test or run afterward.
Not sure what happened to my project, but ran into frustration looking for missing and/or misspelled files when it was just leftovers from different compiled files not cleaned out. Previously moved views around to different schemas and renamed others.
So the mistake is here in the naming:
The model name in the models.yml file should for example be: employees
And the sql file should be named: employees.sql
So your models.yml will look like:
version: 2
models:
- name: employees
description: "View of employees"
And there must be a model with file name: employees.sql
One case when this will happen is if you have the same data source defined in two different schema.yml file (or whatever you call it)
I am using Ansible tower 3.4.3.
As part of one of my jobs, I need to generate a log file and logfile name should contain Tower_Job_ID to easily recognize which log is generated by which tower job id.
I guess there will be some global variables like "ansible_tower_job_id" but unable to find any documentation or the variable name.
Can some one help, how to capture the current running job ID in ansible tower.
The callback link contains the ID in it.
From the docs: "The ‘1’ in this sample URL is the job template ID in Tower." .
I'm having trouble pushing to gcr with the following
gcr:
image: plugins/gcr
registry: us.gcr.io
repo: dev-221608/api
tags:
- ${DRONE_BRANCH}
- ${DRONE_COMMIT_SHA}
- ${DRONE_BUILD_NUMBER}
dockerfile: src/main/docker/Dockerfile
secrets: [GOOGLE_CREDENTIALS]
when:
branch: [prod]
...Where GOOGLE_CREDENTIALS will work, but if named say GOOGLE_CREDENTIALS_DEV it will not be properly picked up. GCR_JSON_KEY works fine. I recall reading legacy documentation that spelled out the acceptable variable names, of which GOOGLE_CREDENTIALS and GCR_JSON_KEY were listed among other variants but as of version 1 they've done some updates omitting that info.
So, question is, is the plugin capable of accepting whatever variable name or is it expecting specific variable names and if so what are they?
The Drone GCR plugin accepts the credentials in a secret named PLUGIN_JSON_KEY, GCR_JSON_KEY, GOOGLE_CREDENTIALS, or TOKEN (see code here)
If you stored the credentials in drone as GOOGLE_CREDENTIALS_DEV then you can rename it in the .drone.yml file like this:
...
secrets:
- source: GOOGLE_CREDENTIALS_DEV
target: GOOGLE_CREDENTIALS
...
I get the following error:
Keen.delete(:iron_worker_analytics, filters: [{:property_name => 'start_time', :operator => 'eq', :property_value => '0001-01-01T00:00:00Z'}])
Keen::ConfigurationError: Keen IO Exception: Project ID must be set
However, when I set the value, I get the following:
warning: already initialized constant KEEN_PROJECT_ID
iron.io/env.rb:36: warning: previous definition of KEEN_PROJECT_ID was here
Keen works fine when I run the app and load the values from a env.rb file but from the console I cannot get past this.
I am using the ruby gem.
I figured it out. The documentation is confusing. Per the documentation:
https://github.com/keenlabs/keen-gem
The recommended way to set keys is via the environment. The keys you
can set are KEEN_PROJECT_ID, KEEN_WRITE_KEY, KEEN_READ_KEY and
KEEN_MASTER_KEY. You only need to specify the keys that correspond to
the API calls you'll be performing. If you're using foreman, add this
to your .env file:
KEEN_PROJECT_ID=aaaaaaaaaaaaaaa
KEEN_MASTER_KEY=xxxxxxxxxxxxxxx
KEEN_WRITE_KEY=yyyyyyyyyyyyyyy KEEN_READ_KEY=zzzzzzzzzzzzzzz If not,
make a script to export the variables into your shell or put it before
the command you use to start your server.
But I had to set it explicitly as Keen.project_id after doing a Keen.methods.
It's sort of confusing since from the docs, I assumed I just need to set the variables. Maybe I am misunderstanding the docs but it was confusing at least to me.
I want to use puppet to manage some servers. Even after reading dozens of documentation pages, it is not clear to me how to use modules and how to use them with hiera. As first experiment I wanted a user "admin" to be created on one node and found this module -> https://github.com/camptocamp/puppet-accounts
My /etc/puppet/hiera.yaml looks as simple as this
---
:backends:
- yaml
:hierarchy:
- node/%{::fqdn}
- common
:yaml:
:datadir: /etc/puppet/hieradata
My /etc/puppet/hieradata/node/node1.example.com.yaml contains this
---
accounts::users:
admin:
uid: 1010
comment: admin
accounts::ssh_keys:
admin:
comment: ad
type: ssh-rsa
public: AAAAAAAAAAAAAA
This worked after I put this in my /etc/puppet/manifests/site.pp
hiera_include('classes')
class
{
'accounts':
ssh_keys => hiera_hash('accounts::ssh_keys', {}),
users => hiera_hash('accounts::users', {}),
usergroups => hiera_hash('accounts::usergroups', {}),
}
accounts::account
{
'admin':
}
Is this good practice? To me it feels wrong to put that stuff into site.pp since it gets messed up when I later use more modules. But where else to put it? I also don't understand how this separates data from logic, since I have data in both, node1.example.com.yaml and site.pp (admin). Some help would be great..
To understand what hiera is, you should think simply that Hiera is a DATABASE for puppet, a database of Variables/values and nothing more.
For a beginner I would suggest to focus on other parts of the system, like how to create modules! and how to manage your needs (without complexity) and then slowly build the "smart" recipes or the reusable ones...
Your puppet will first sick for a file called sites.pp (usually is on your main $confdir (puppet.conf variable. I am not going to mention environments it is for later.)
e path is /etc/puppet inside that directory, you have a directory manifests. There is the place for your sites.pp
usually a sites.pp structure is:
node default {
include *module*
include *module2*
}
node /server\.fqdn\.local/ {
include *module2*
include *module3*
}
this means that you have a default Node (if the node name doesn't fit any other node, will use the default, otherwise it will use the regex matching of the node FQDN in this case server.fqdn.local.
The modules (module, module2 and module3) are stored inside the $modulespath set on your puppet.conf. In our case i will use the: /etc/puppet/modules
the tree will look like:
/etc/puppet/modules/
/etc/puppet/modules/module/
/etc/puppet/modules/module/manifests/
/etc/puppet/modules/module/manifests/init.pp
/etc/puppet/modules/module2/
/etc/puppet/modules/module2/manifests/
/etc/puppet/modules/module2/manifests/init.pp
/etc/puppet/modules/module3/
/etc/puppet/modules/module3/manifests/
/etc/puppet/modules/module3/manifests/init.pp
About
classes: https://docs.puppetlabs.com/puppet/latest/reference/lang_classes.html
generally what i explained but from puppet labs: https://docs.puppetlabs.com/puppet/latest/reference/dirs_manifest.html
Please note that the example from the README
class { 'accounts':
ssh_keys => hiera_hash('accounts::ssh_keys', {}),
users => hiera_hash('accounts::users', {}),
usergroups => hiera_hash('accounts::usergroups', {}),
}
is catering to users of Puppet versions before 3.x which had no automatic parameter lookup. With a recent version, you should just use this manifest:
include accounts
Since the Hiera keys have appropriate names, Puppet will look them up implicitly.
This whole thing still makes no sense to me. Since I have to put
accounts::account
{
'admin':
}
in a manifest file to create that user, what for is hiera useful in this case? It doesn't separate data from logic. I have data in both, the .yaml file (ssh keys, other account data) and in a manifest file (the snippet above). By using hiera I expect to be able to create that user inside /etc/puppet/hieradata/node/node1.example.com.yaml but this is not the case. What is the right way to do this? What for is the example hiera file of this module useful? Wouldn't it be easier create an account the old style way in site.pp?