Last two line show error .MY sqlwork bench show syntax error in last two line Limit 1
End
trying to run Database procedures.Error code Error 1064 you have error in Mysql bench syntax
CREATE PROCEDURE `xyz_Get`(
IN pPlaceId BIGINT,
IN pSwitchedCompanyId BIGINT,
IN pRequestedBy BIGINT
)
BEGIN
SELECT
`PlaceId`,
`CategoryCode`,
`CategoryName`,
`Description`,
`ParentCategoryId_FK`,
`ModuleId_FK`,
`LanguageId_FK`,
`CompanyId_FK`,
`OwnerCompanyId_FK`,
`IsDeleted`,
`IsArchived`,
`CreatedDate`,
`ModifiedDate`,
`CreatedBy_FK`,
`ModifiedBy_FK`
FROM `xyz_Place`
WHERE
`PlaceId` = pPlaceId AND
(
`CompanyId_FK` = pSwitchedCompanyId OR
`OwnerCompanyId_FK` = pSwitchedCompanyId
)
AND `IsDeleted` = 0
LIMIT 1;
END
Related
How to run procedure without parameter in Teradata
I'm trying with : call db1.proc_dbOSA()
Error Msg:
Call failed 3707: PROC_DBOSA: Syntax error, expected something
like a name or a Unicode delimited identifier between ‘(‘ and ‘)’
New Procedure with error result.
When i run only code then everything works ok.
REPLACE PROCEDURE db1.proc_dbOSA()
BEGIN
DELETE FROM db1.LOG_dbOSA;
INSERT INTO
db1.LOG_dbOSA
(StoreNo, IDX, Flow, Status, MRP, OSA_IDX, OSA_AC)
WITH a AS (
SELECT
c.StoreCode,
CAST(SUBSTRING(c.ArticleCode FROM 13 FOR 6) AS INT) AS IDX,
RpType,
CASE
WHEN c.MinimumTargetStockWrpl >= l.MinimumTargetStockWrpl THEN CAST(l.MinimumTargetStockWrpl AS INT)
WHEN c.MinimumTargetStockWrpl < l.MinimumTargetStockWrpl THEN CAST(c.MinimumTargetStockWrpl AS INT)
End AS StoreMin,
c.ValUnrestrictedStock
FROM
db1.tab1 c
INNER JOIN
(
SELECT
StoreCode,
ArticleCode,
MinimumTargetStockWrpl
FROM
db1.tab1
WHERE
ProcessingDate = CURRENT_DATE - 14
) l ON c.StoreCode = l.StoreCode AND c.ArticleCode = l.ArticleCode
WHERE
c.ProcessingDate = CURRENT_DATE AND c.MinimumTargetStockWrpl IS NOT NULL AND l.MinimumTargetStockWrpl IS NOT NULL AND l.MinimumTargetStockWrpl > 0
)
, t AS
(
SELECT
CAST(SUBSTRING(ArticleCode FROM 13 FOR 6) AS INT) AS IDX,
RpType,
ArticlesPlanner
FROM
DWH_db_V.STK_B_ARTICLE_DAY_V
WHERE
ProcessingDate = CURRENT_DATE AND StoreCode = 'DR04'
)
SELECT
a.StoreCode,
a.IDX,
t.RpType,
t.ArticlesPlanner,
a.RpType,
CASE
WHEN a.ValUnrestrictedStock > 0 THEN 1
WHEN a.ValUnrestrictedStock <= 0 THEN 0
End AS OSA_IDX,
CASE
WHEN a.ValUnrestrictedStock >= StoreMin THEN 1
WHEN a.ValUnrestrictedStock < StoreMin THEN 0
End AS OSA_AC
FROM
a
LEFT JOIN
t ON t.IDX = a.IDX;
End;
BTEQ Error:
+---------+---------+---------+---------+---------+---------+---------+----
Call proc_dbOSA;
Call proc_dbOSA;
$
* Failure 3707 Syntax error, expected something like '(' between the word
'proc_dbOSA' and ';'.
Statement# 1, Info =18
* Total elapsed time was 1 second.
Call proc_dbOSA();
* Failure 3707 PROC_DBOSA:Syntax error, expected something like a name or
a Unicode delimited identifier between '(' and ')'.
* Total elapsed time was 1 second.
Stored procedures do not support the following:
EXPLAIN and USING request modifiers within a stored procedure
EXECUTE macro statement
WITH clause within a stored procedure.
Stored procedures, as well as macros, do not support the following query logging statements:
BEGIN QUERY LOGGING
END QUERY LOGGING
FLUSH QUERY LOGGING
REPLACE QUERY LOGGING
I 'm not a regular of Sybase ASE.
Tring to make a script to add line into a tempory table.
sybase version 12.5.4
BEGIN
declare and init variable
--boucle
select * into #parTemp from Parution where 1=2
WHILE #dateCourante <= #dateFin
BEGIN
select #dpart1=datepart(mm,#dateCourante)
select #dpart2=datepart(dd,#dateCourante)
select #dpart3=datepart(dw,#dateCourante)
--si on est pas le 1er mai
if #dpart1 <> 5 AND #dpart2 <> 1
begin
--id parution
select #idPar = #idPar + 1
select #idParChaine = convert(varchar(10),#idPar)
--num parution
select #numPar = #numPar + 1
select #numParChaine = convert(varchar(20),#numPar)
--prix du jour courant
if datepart(dw,#dateCourante)=6
select #prixCourant = #prixVen
else
if datepart(dw,#dateCourante)=1
select #prixCourant = #prixDim
else
select #prixCourant = #prix
end
end
insert into #parTemp values (#idParChaine,#dateCourante,#numParChaine,#nbPagination,#prixCourant,#poids,#parCompt,#parOJD,#resVal)
end
select #dateCourante = dateadd(dd,1,#dateCourante)
END
END
Errors i get :
Error code 156, SQL state ZZZZZ: Incorrect syntax near the keyword 'WHILE'.
Error code 156, SQL state ZZZZZ: Incorrect syntax near the keyword 'end.
Error code 156, SQL state ZZZZZ: Incorrect syntax near the keyword 'End'.
i really don't understand, thank for help.
Pierre
INSERT INTO Census_Demographics (median_rooms)
VALUES ('8')
WHERE match_code = 'G06000104002001';
Above statement is throwing the follow error and I haven't been able to figure it out.
You have an error in your SQL syntax; check the manual that
corresponds to your MariaDB server version for the right syntax to
use near 'WHERE match_code = 'G06000104002001'' at line 1 Query is :
INSERT INTO Census_Demographics (median_rooms) VALUES ('8') WHERE
match_code = 'G06000104002001'; Error Code: 1064
You probably intend update:
update Census_Demographics
set median_rooms = 8
where match_code = 'G06000104002001';
HANA 102.05 fails to execute the following code:
CREATE TABLE ATABLE( f INT );
CREATE PROCEDURE TestProc()
AS
BEGIN
SELECT f FROM ATABLE
FOR UPDATE; -- Without FOR UPDATE it works
END;
SELECT 'Hello' FROM DUMMY;
complaining that:
SAP DBTech JDBC: [257]: sql syntax error: incorrect syntax near "SELECT": line 8 col 2 (at pos 124)
which points outside the proceudure, at SELECT 'Hello'. The procedure itself compiles without error. The entire script completes successfully if I remove the FOR UPDATE directive. What is wrong with the original?
Update
When I execute the same query from hdbsql.exe I get:
0 rows affected (overall time 26,076 msec; server time 6518 usec)
* 257: sql syntax error: line 5 col 9 (at pos 71) SQLSTATE: HY000
* 257: sql syntax error: incorrect syntax near "END": line 2 col 1 (at pos 32) SQLSTATE: HY000
'Hello'
"Hello"
1 row selected (overall time 4644 usec; server time 143 usec)
I have been staring at this hours trying to figure out why it won't run, and cannot see any syntax error which should stop this from compiling, but I am nonetheless getting the following errors:
Error(6,1): PL/SQL: SQL Statement ignored
Error(22,7): PL/SQL: ORA-00933: SQL command not properly ended
The function I am trying to create is as follows:
create or replace function caps_get_Uoffer_count_BD(ayrc in varchar2
,mcrc in varchar2)
return number
is
app_count number;
begin
select count(*)
from
(select distinct cap.cap_stuc,cap.cap_apfs , cap.cap_seqn from
intuit.srs_cap cap
,intuit.srs_apf apf
,intuit.srs_ioi ioi
where cap.cap_ayrc = ayrc
and cap.cap_mcrc = mcrc
and apf.apf_stuc = cap.cap_stuc
and apf.apf_seqn = cap.cap_apfs
and apf.apf_recd <= to_date('1501'||substr(ayrc,1,4),'DDMMYYYY')
and cap.cap_stuc = ioi.ioi_stuc
and cap.cap_mcrc = ioi.ioi_mcrc
and ioi.ioi_iodc ='PAPERLESS'
and cap.cap_stac like 'A%'
and cap.cap_idrc in ('U','UF','UI','UD','CFU','CFUF','CIUI','CIUF','CIUD','CIU','CFUI','CFUD'))
return(app_count);
end;
Database is Oracle 11g. Can anyone help?
Many thanks in advance