I have already been searched solution and can't get the right solution yet.
ObjDRow = DataDataSet.Client.Rows.Find(strClientNo)
With ObjDRow
.ClientName = txtClientName.Text.Trim
.ClientAddr = txtAddr.Text.Trim
If txtRegOffice.Text = "" Then
.ClientRegOfficeAddr = txtAddr.Text.Trim
Else
.ClientRegOfficeAddr = txtRegOffice.Text.Trim
End If
.MailtoCorresAddr = RBtnCorresAddr.Checked
.MailtoRegOffice = RBtnRegOffice.Checked
.ClientHPhone = mskHandPhone.Text.Trim
.ClientPager = mskPagerNo.Text.Trim
.ClientTel = mskTelephone.Text.Trim
.ClientFaxNo = mskFax.Text.Trim
.ClientEmail = txtEmail.Text.Trim
.PrimaryPartner = txtPriPartner.Text.Trim
.SecondPartner = txtSecPartner.Text.Trim
.BroughtInBy = cboPreferredBy.Text.Trim
.PersonIncharge = cboPersonIncharge.Text.Trim
.GLAC = cboGLAcode.Text.Trim
.ContactPerson = txtContactPerson.Text.Trim
.AcraNo = txtAcraNo.Text.Trim
.Active = chkActive.Checked
If dtpfyear.Checked = True Then
.YearEnd = dtpfyear.Text
End If
.DeptNo = cboDeptNo.Text.Trim
.DateJoined = dtDateJoined.Value
If cboClientName.SelectedIndex = -1 Then
.Group = txtClientNo.Text
Else
.Group = cboClientName.SelectedValue
End If
.GroupStatus = RButtonMainYes.Checked
.MainGroup = RButtonSubYes.Checked
If IsDate(dtIncorporationDate.Text) Then
.DateOfIncorporation = dtIncorporationDate.Text
Else
.SetDateOfIncorporationNull()
End If
End With
ObjDRow.EndEdit()
ClientTableAdapter.Update(DataDataSet.Client)
Error is occurs when ClientTableAdapter Update.
This error occurs for some client only.
I already check datatype of database and table adapter's datatype and all datatype are same.
My input value datatype and table adapter's datatype are same.
This error occurs even I command all line of update code (.ClientName to last line) but this error still occurs.WTF
Most answers say this is a single quote problem but In my case, There is no single quote.
All data types are same and input values are the same with datatype.
** Updated**
This error still occurs even I do like=>
ObjDRow = DataDataSet.Client.Rows.Find(strClientNo)
ObjDRow.EndEdit()
ClientTableAdapter.Update(DataDataSet.Client)
There is nothing change just select and update.
But if I remove ObjDRow.EndEdit().All are fine. There is no error.
Related
For my toggle of a Boolean value with Flask and SQLite I want to change 1 into 0 and 0 into 1 on table engineering_project. The message can be successfully flashed so the if function is working. However, the value of engg_proj_status in the table cannot be updated:
conn = sqlite3.connect(db_path)
conn.row_factory = sqlite3.Row
c = conn.cursor()
c.execute("SELECT engg_proj_status FROM engineering_project WHERE engg_proj_id =?",(engg_proj_id,))
status = c.fetchone()[0]
if status == 1:
c.execute("UPDATE engineering_project SET engg_proj_status = ? WHERE engg_proj_id = ?;",(False,engg_proj_id))
flash("Status changed from COMPLETED to OPEN")
else:
c.execute("UPDATE engineering_project SET engg_proj_status = ? WHERE engg_proj_id = ?;",(True,engg_proj_id))
flash("Status changed from OPEN to COMPLETED")
Add conn.commit()
Thanks to this comment from forpas.
My query is like but it' not working and giving error "SQL command not properly ended" and the string:HDR.TRX_DT = DTL.TRX_DT AND HDR.BU_TYPE = DTL.BU_TYPE AND HDR.BU_CODE = DTL.BU_CODE
AND HDR.TRX_NO = DTL.TRX_NO AND HDR.RGSTR_NO = DTL.RGSTR_NO AND HDR.TRX_TYP_CD in ('COS') is value in column . i want use that value in where clause of select statement .How will do you that .plz suggest
select * from mdbat.migration_ctrl_all where addition_condition='HDR.TRX_DT = DTL.TRX_DT AND HDR.BU_TYPE = DTL.BU_TYPE AND HDR.BU_CODE = DTL.BU_CODE
AND HDR.TRX_NO = DTL.TRX_NO AND HDR.RGSTR_NO = DTL.RGSTR_NO AND HDR.TRX_TYP_CD in ('COS')';
Escape the ' delimiting the COS string, as said by Alex Larionow. But escape each one with another '
select * from mdbat.migration_ctrl_all where addition_condition='HDR.TRX_DT = DTL.TRX_DT AND HDR.BU_TYPE = DTL.BU_TYPE AND HDR.BU_CODE = DTL.BU_CODE
AND HDR.TRX_NO = DTL.TRX_NO AND HDR.RGSTR_NO = DTL.RGSTR_NO AND HDR.TRX_TYP_CD in (''COS'')';
I am converting a project which is coded in old vb6 way. I am replacing the instances of OracleInProcServer.OraDynaset to Datatable for getting the data from database. But a form is generated in a dynamic way has the below code. i don't know how be there a alternate code for there in vb.net. Is there any way I can replace the below code without using dsAnswer As OracleInProcServer.OraDynaset. I don't know what is ! here also and how it is working.
Dim dsAnswer As OracleInProcServer.OraDynaset
Select Case dsAnswer!Shape.Value
Case 0 To 5
iShapes = iShapes + 1
'Load(f!shpCtrl(iShapes))
frmDynaForm.shpCtrl.Load(iShapes)
frmDynaForm.shpCtrl(iShapes).FillColor = System.Drawing.Color.FromArgb(DecodeColorDesc(Format$(dsAnswer!Color.Value)))
'frmDynaForm.shpCtrl(iShapes).Shape = dsAnswer!Shape.Value
frmDynaForm.shpCtrl(iShapes).Top = dsAnswer!Top.Value
frmDynaForm.shpCtrl(iShapes).Left = dsAnswer!Left.Value
frmDynaForm.shpCtrl(iShapes).Height = dsAnswer!Height.Value
frmDynaForm.shpCtrl(iShapes).Width = dsAnswer!Width.Value
frmDynaForm.shpCtrl(iShapes).BorderWidth = dsAnswer!BorderWidth.Value
frmDynaForm.shpCtrl(iShapes).Visible = True
Case -1
iLines = iLines + 1
'Load(f!lineCtrl(iLines))
frmDynaForm.lineCtrl.Load(iShapes)
frmDynaForm.lineCtrl(iLines).BorderColor = System.Drawing.Color.FromArgb(DecodeColorDesc(Format$(dsAnswer!Color.Value)))
frmDynaForm.lineCtrl(iLines).Y1 = dsAnswer!Top.Value
frmDynaForm.lineCtrl(iLines).X1 = dsAnswer!Left.Value
frmDynaForm.lineCtrl(iLines).Y2 = dsAnswer!Height.Value
frmDynaForm.lineCtrl(iLines).X2 = dsAnswer!Width.Value
frmDynaForm.lineCtrl(iLines).BorderWidth = dsAnswer!BorderWidth.Value
frmDynaForm.lineCtrl(iLines).Visible = True
End Select
I would like to run 2 queries within the same code, but I cannot figure out how to. The 2 queries are as follows:
UPDATE usercomp
SET shiftstart = shifts.shiftstarttime,
shiftfinish = shifts.shiftfinishtime
FROM shifts
WHERE usercomp.shiftid = shifts.id
SET break1start = breaks.timestarted,
break1finish = breaks.timefinished,
break1duration = breaks.duration
FROM breaks
WHERE usercomp.break1id = breaks.id;
I am getting the following error:
ERROR: syntax error at or near "SET"
LINE 6: SET break1start = breaks.timestarted,
Can anyone help ?
You need to write two UPDATE statement
UPDATE usercomp
SET shiftstart = shifts.shiftstarttime,
shiftfinish = shifts.shiftfinishtime
FROM shifts
WHERE usercomp.shiftid = shifts.id;
UPDATE usercomp
SET break1start = breaks.timestarted,
break1finish = breaks.timefinished,
break1duration = breaks.duration
FROM breaks
WHERE usercomp.break1id = breaks.id;
I am getting the Error using database.jdbc.connection/fastinsert (line 140)
Table variables and insert 'fieldnames' do not match. error while exporting data from matlab to sql. Can you please help me out.
Below is my code.
conn = database('rScenariosDB','NCAT\aabhaler','','Vendor','Microsoft SQL Server','Server','A0030110GB6S942','AuthType','Windows','portnumber',1433);
for i = 1 : rScenarioCnt
if rScenario{i}.status == 1
ECostMax(i) = rScenario{i}.ECostMax;
CO2EmisMax(i) = rScenario{i}.CO2EmisMax;
ECost(i) = rScenario{i}.YearAlloc.ECost;
CO2Emis(i) = rScenario{i}.YearAlloc.CO2Emis ;
EmisCostYear(i) = rScenario{i}.YearAlloc.EmisCostYear ;
CO2EmisYear(i) = sum(rScenario{i}.YearAlloc.CO2EmisYear);
end
end
rId = 1 : rScenarioCnt ;
colnames={'rScenarioId' ,'ECostMax' , ' CO2EmisMax','ECost' ,'CO2Emis', 'EmisCostYear', 'CO2EmisYear' };
data = table(rId',ECostMax',CO2EmisMax',ECost',CO2Emis',EmisCostYear', CO2EmisYear','VariableNames',colnames);
tablename = 'rScenarios';
fastinsert(conn,tablename,colnames,data);
curs=exec(conn,'select * from [dbo].[rScenarios]');
curs=fetch(curs);
disp(curs.Data);
close(curs);
close(conn);