i am trying to run my MSTest from the command line, and I cannot for the life of me figure out why this isn't working. Yes it works if I manually change the directory to the executable, but I don't want to do that every time.
In the image below, you can see I have set up the environment variable, and yes I have restarted my computer many times.
You need to add it to your PATH variable. In that same dialog edit the Path variable and add the folder to the path. For example, I have enterprise installed, so I used this path:
C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\Common7\IDE\CommonExtensions\Microsoft\TestWindow
After updating the path you will need to close and restart the cmd window.
Related
I am wanting to program Minecraft mods using forge. I am going through the standard installation to begin creating mods, but I have run into an issue. I ran the code "gradlew setupDecompWorkspace eclipse" and it is telling me "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. Please set the JAVA_Home vairable in your environment to match the location of your Java installation." Is it possible to change something else or do something else that will allow me to program? I also cant change the environment variables.
You can change environment variables, even without being an administrator.
The easiest solution is to use set to temporarily change the environment variable for only your session (IE, it'll get reset when you close your command prompt):
set JAVA_HOME=C:\Program Files\Java\jdk1.8.0_91
gradlew setupDecompWorkspace eclipse
Obviously, you'd change the location given to a different one if you have the JDK in a different location.
If you want to change it more permanently, you can use the setx command. Setx keeps the changes you made between sessions (and, more importantly, you don't need to be an administrator, since changes are only made to your account). Note that running setx doesn't apply the changes to the current command prompt window, only future ones; you'd need to close and reopen command prompt after setting the path.
Run
setx JAVA_HOME "C:\Program Files\Java\jdk1.8.0_91"
and then close and reopen your command prompt, and it should keep the path set. (Note that again, you'd want to use the path for your java installation; also it needs to be surrounded by quotes here).
If you don't want to run set each time, you can probably edit gradlew.bat and put the same set command at the top of it.
Simply open gradlew.bat with a text editor and then put
set JAVA_HOME=C:\Program Files\Java\jdk1.8.0_91
at the top of it (again, replace the path with the correct one for your version).
I want to change the build dir of team city build agent to:
E://MY_PROJECT_SVN
While installing the build agent I set the same but it diaplays C://buildAgent/work in TeamCity web ui due to which my build fails.
My buildAgent.properties file shows
workDir=E\:\\MY_PROJECT_SVN
And buildAgent.dist.properties file shows
workDir=E://MY_PROJECT_SVN
But I get following error when I run team city
Failed to start MSBuild.exe. Failed to find project file at path:
C:\BuildAgent\work\3ac16e0b4e3af05b\Modules\SIM5.sln
Because of wrong working dir
The buildAgent.dist.properties is indeed just an example, but the solution is something you almost had; you need to put this into the buildAgent.properties:
workDir=E:/MY_PROJECT_SVN
Update:
It should be noted that on TeamCity 7.0 the workDir seemingly can't be on a separate disk; it runs most of the way through the build and then fails. However, using a junction to point from the local (default) folder to the E: drive will work. The tempDir can be pointed to a remote disk though.
The file buildAgent.dist.properties is not used, it is just an example. So don't worry about the contents of that file.
What you have set in buildAgent.properties is what matters. What is happening for you is the agent is reverting to the default location for the working directory.
This means that for some reason it is not able to read or parse the buildAgent.properties file. Make 100% certain that the entire file has no errors in it.
https://confluence.jetbrains.com/display/TCD8/Build+Agent+Configuration
Making any change to this file and saving it should cause the build agent to reboot automatically and reload the new config once it has restarted.
http://blog.jetbrains.com/teamcity/2007/10/configuration-files-editing-without-teamcity-restart/
To build on paul-f-wood's answer:
Teamcity 9.1.6 also has the "feature" where the work directory cannot be on a different drive. I tried several permutations of the temp and work dir, and the only ones that stuck were with the work dir on the same drive as the root teamcity folder. However as paul said, using a junction works like a charm.
cmd: rm C:\BuildAgent\work
cmd: mklink /J C:\BuildAgent\work E:\MY_PROJECT_SVN
About a week ago I installed golang successfully on my computer and got it's terminal commands to process. So by that, I know go is on my computer.
I have been looking for a good IDE and found https://code.google.com/p/liteide/ LiteIDE which was made specifically for Go.
I read that if you already had go installed on your computer then you could use LiteIDE to start building your code right away. I must have read something wrong some where because I cannot get my projects to build at all. I think it there may be a missing/incorrect path and or something is just setup incorrectly.
This is the error I get in the console:
Current environment change id "win64-user"
C:/go/bin/go.exe env [c:\go]
set GOARCH=amd64
set GOBIN=
set GOCHAR=6
set GOEXE=.exe
set GOHOSTARCH=amd64
set GOHOSTOS=windows
set GOOS=windows
set GOPATH=
set GORACE=
set GOROOT=c:\go
set GOTOOLDIR=c:\go\pkg\tool\windows_amd64
set TERM=dumb
set CC=gcc
set GOGCCFLAGS=-g -O2 -m64 -mthreads
set CXX=g++
set CGO_ENABLED=1
Command exited with code 0.
First_Lite_Go_Proj [C:/go/src/First Litel Go Proj]
Error: process failed to start.
I checked the C:/go directory to make everything there is correct and it was. Also I'm using 64bit windows 7 and double checked that as well.
Any ideas? Mine are: Missing/Incorrect Paths, Can't access a certain directory due to restrictions.
While I have not tested this in Windows 7, on Windows 10, these were the steps that I took to make LiteIDE work
Installed Go to C:\Go
Added C:\Go\bin to PATH and made sure go was working from Command Line
This was the most important step for me. Defined GOPATH in an environment variable. In my case, it was C:\Users\vivek\Documents\Source\Go. I also made sure that there were three folders src, pkg and bin were created in GOPATH. At this point go env was showing me correct values for GOPATH and GOROOT. go get, go build and go install was working as well at this step.
Downloaded and unzipped LiteIDE to C:\liteide. Started LiteIDE and it worked out of the box for me. Make sure that GOPATH is seen correctly by LiteIDE by going to View > Manage GOPATH
Hope this helps. Good luck.
It's not a good idea to keep your projects in the GOROOT path, which per default (when installed using the MSI installer) is C:\Go. Always keep it separated from there. It also helps to avoid issues with updates.
Since Go projects are made up of packages which are organized in directory structures it is important to follow a few rules and keep the working space for your Go projects separated and clean.
In my opinion its best practice to create ONE working directory as the root for ALL your Go projects somewhere in your user space and stick to it.
One way to do this is to create a directory like "work" and set the environment variable GOPATH to it (e.g. C:\Users\Peter\Documents\work). Make sure to relog or restart your computer after your changes.
Upon certain operations Go will automatically create the directories bin, pkg and src below your GOPATH.
src contains your created or downloaded Go source files,
pkg contains your installed package objects, and
bin contains your installed executable files.
bin or pkg will automatically be created when you use the go install command to install a binary executable or a package. It's important to understand that these are files that are not part of the Go installation.
src, if it does not yet exist, will automatically be created the first time you issue a go get command or in case of LiteIDE, the first time you create a new Go1 Command Project or Go1 Package Project. Watch the "Location:" field on the dialog box, it should include your path defined in GOPATH followed by \src (e.g. C:\Users\Peter\Documents\work\src).
In the name field enter the path you want to use for your project. If you plan to track the development of your project on Github (or other repo) it's common practice to include the path to the Git repo in your source path (e.g. github.com/petergloor/hello-go).
Of course you can use any other structure to organize your projects as long you make sure they fall below the src directory in your GOPATH.
For more information about Go workspaces read https://golang.org/doc/code.html#Workspaces.
A final note about the GOROOT environment variable. Dont explicitly set this if you install Go in C:\Go. It's enough to include C:\Go\bin in your path and to set GOPATH. GOROOT is only needed in case Go is installed at another location.
I also had this problem first, but after completing the installation process, I succeeded.
Step 1:
Run (Ctrl+R) -> run target, request build first.
BuildAndRun(Ctrl+F7) -> build and run target
FileRun(Alt+F6) -> go run
step 2:
Check Config via this URL:
https://www.goinggo.net/2013/06/installing-go-gocode-gdb-and-liteide.html
Try setting up the GOROOT to the directory where go was installed. It worked for me.
Do you have 'Install' keyword in your project name? Try remove it.
You have to setup LiteIDE variables correctly (if there are not by default).
Please, check two options:
Go to Settings → "Manage GOPATH"
Options → LiteEnv (there are
environment definitions files). Just double click on someone and
setup Go environment variables.
I'm not sure how this works, but it worked in my case. I got this idea from this video on Youtube-Chris Hawkes
Open LiteIDE.
Click File---New.
Select "Go1 Command Project".
Browse the desired path.
Select the desired folder.
Name the folder and click Ok.
Now, you will be able to see a "main.go" file opened in the IDE.
Write whatever code you want to run in this file with correct syntax, it will run.
The only problem with this is, whenever I create another ".go" source code file in the same folder, the same error is shown. So, you might have to edit this file every time, you try to write new code.
I'm running a java application that we distribute as a server-side system. I'm trying to write a launcher ("write" is somewhat of an overstatement here, I'm basically just copying the Java.exe file so that we can get the desired name in the process explorer of windows). This exe is in our bin/ directory of our application file tree.
Now, we also have a jre/ directory in our file tree, which is where Java.exe actually resides (we ship our product with the Java environment). When I use Java.exe as the launcher, which is located in \jre\jre1.6.0_21\bin, or if I place the copy (call this exectuable 'Orange.exe') I made in this directory, it works just fine. But, if I put my 'Orange.exe' in the bin\ directory, then I get the following error:
Error: no 'server' JVM at 'C:\Program Files\Java\jre6\bin\server\jvm.dll'
I think I understand what is happening here - I want to use the server version of the jvm.dll file, which is in our jre directory. The problem is, I don't understand WHY it doesn't look in the jre\jre1.6.0_21 directory in my application path. I've set my JAVA_HOME environment variable to this location. It seems like it's defaulting to another, system-wide expected location.
Does anyone know how I can change this, so that it looks in my application-provided java environment directory? Ideally, this will be an environment variable, as I need to call this application with parameters using a batch file.
There is a little trick to get the server JVM up and running:
Copy "server" folder from the JDK's JRE's bin folder example: C:\Program Files\Java\jdk1.6.0\jre\bin\server
Paste the "server" folder to JRE's bin folder example: C:\Program Files\Java\jre1.6.0\bin
Done
See official readme for details.
I've just been struggling with this same problem in Eclipse and I noted that as suggested by the answer above the JBoss site has a thread on this issue saying the same as the answer above to copy files from the jdk to the jre folder.
I noticed that you can avoid having to do this if you define the runtime to be the jdk when you create the server. I didn't find how to edit an existing server though.
AFAIK, the JRE usually doesn't ship with a server VM (only the client VM). If you really need the server VM, you have to use the JDK installation.
See Oracle Java for Developers Download page for JRE's with Server VM.
I had the same problem here but, in my case, I just had not properly update the JAVA_HOME and my PATH for my recently installed JDK.
I just updated it to my new JDK location and the server started just fine.
Windows looks for DLLs in LIBPATH environment variable.
And make sure your 1.6.0_21 is somewhere first in PATH.
I solved the same problem by setting the JAVA_HOME path to C:\Program Files (x86)\Java\jre1.8.0_131\bin
The easiest fix is simply to copy the contents of client folder inside bin and put in a newly created folder 'server' inside bin.
Copy from C:\Program Files (x86)\Java\jre1.8.0_261\bin\client
Paste in C:\Program Files (x86)\Java\jre1.8.0_261\bin\server
*server is the new folder
Make sure that server/jvm.dll file must be there when we are trying to run servers like servicemix.
Copy "server" folder from the JDK's JRE's bin folder example: C:\Program Files\Java\jdk1.6.0\jre\bin\server
Paste the "server" folder to JRE's bin folder example: C:\Program Files\Java\jre1.6.0\bin
I paced problem, I went through above..That's working fine.
Thanks!
How do you register a name for a program in the windows run dialog?
For instance typing in "notepad" and pressing enter runs notpad.exe
"photoshop" in my case runs Photoshop CS3
I'm using vb2005.net
Besides the system path, there's also the App Paths in the registry. Visual Studio, for example, doesn't have its main app (devenv.exe) in the PATH, but you can still launch it from the Run dialog.
Available names are enumerated under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths, with corresponding launch paths as values under each name.
See http://www.tweakxp.com/article36684.aspx for an example of how to add an exe to your App Paths.
This works because those applications have added the directory containing their executable to Window's PATH variable. This variable is used to resolve the locations of any files entered into the run dialog (among other things).
Please see How to set the path in Windows 2000 / Windows XP.
There is no registration, your program .bat, .exe must be within the system path.
If you right-click on "My Computer" ->"Properties"-> "Advanced" then go to the "System Variable". You can edit the "Path" variable to include the location of your executable.
This has nothing to do with "registering" a program. Windows uses the current value of your PATH environment variable, and any executables found in those directories can be executed by simply typing the name into the Windows "Run" box (or command prompt, or anything else that launches executables).
Some programs add their directories to the PATH, others drop an executable (or even a batch file) into a well-known directory that is already part of the PATH, such as the Windows directory.
Add the program's path to your PATH variable.
If you want to do it programmaticly, you can edit (append, not just set) this registry location (in, say, your installer):
HLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\Path