I am trying to run the "Visual studio build task" in VSTS CI, but its failing with the following error:
Build error
I read it here bclbuildWhat does the Microsoft.Bcl.Build NuGet package do?
and passed the MSBuild arguments as /p:BclBuildImported=Ignore but still it complains that nuget restore didn't occur. What could be the problem?
Nuget restore task:
Nuget-restore task
Firstly make sure you can build the project locally with VS. Then add Nuget Restore task in the build definition to restore the packages.
UPDATE:
Just check your Nuget.config file, make sure you have set the correct feeds/package sources you want to consume and the package Microsoft.Bcl.Build.1.0.21 is included in the sources.
See Specifying sources in NuGet.config for details.
Besides, you can also try to create a new build definition with the Nuget restore task, then provide the nuget.config file and proper path to solution, also try with other Hosted agents.
Related
I have a ClickOnce project that I'm publishing on DevOps. I've set the MSBuild Arguments property for the WinForm solution's build stage in DevOps to /target:Publish in order to trigger the creation of all the ClickOnce files:
However, that solution also contains an SSDT project, and adding the /target:Publish setting appears to then cause the build process to try publish the SSDT too. That then fails with the error:
C:\Program Files (x86)\Microsoft Visual
Studio\2017\Enterprise\MSBuild\Microsoft\VisualStudio\v15.0\SSDT\Microsoft.Data.Tools.Schema.SqlTasks.targets(1808,5):
error MSB4044: The "SqlPublishTask" task was not given a value for the
required parameter "SqlPublishProfilePath"
Presumably it's failing because there's no publish profile specified in a build parameter for the SSDT to use.
I don't want MSBuild to publish the DacPac to a server, I just want it to create the DacPac. How can I stop the /target:Publish triggering the SSDT publish, is there another build argument I can add to stop that happening?
Notes on what I tried so far to solve this, none of which has worked:
Read about the -target switch in the MS Build official docs in the MSBuild command-line reference and in the MSBuild targets section.
Looked at the code in the .csproj file to try and identify the 'Publish' sections - think Publish must also call Build.
Unticking Deploy for the SSDTs in the solution configuration in VS
Adding entries for False in the Release and Deployment configurations in the SSDT's .csproj file, and also setting that to false for the Debug configuration (as per this question)
Setting MSBuild to only publish one project using the MS Build arguments on DevOps (as per this answer)
Considered pulling the ClickOnce publish out into an entirely separate stage using Mage.exe as per this Walkthrough: Manually deploy a ClickOnce application
Tried to create a publish profile that doesn't actually publish, so that the publish stage can complete (was looking at this question for ideas on that and also the official documentation for SqlPackage.exe)
Eventually I solved the issue above a completely different way. Instead of getting MSBuild to do what I wanted it to, I instead split the solution configuration in two, with one stage for the databases and one for the WinForms project without the databases.
I then used two separate VS Build stages on DevOps with only the WinForms stage still having /target:Publish set.
I've written that up here, but would still like to know the answer to whether it's possible to tell MSBuild not to build the SSDTs when the target is set to Publish?
I'm trying to restore NuGet packages for a .NET Core solution using NuGet Installer TeamCity build step. The 'MSBuild auto-detection' chooses MSBuild v4.0 instead of v15.0 which is required for .NET Core projects:
[15:41:53][restore] Starting NuGet.exe 4.1.0.2450 from C:\TeamCity\buildAgent\tools\NuGet.CommandLine.4.1.0\tools\NuGet.exe
[15:41:53][restore] MSBuild auto-detection: using msbuild version '4.0' from 'C:\Windows\Microsoft.NET\Framework64\v4.0.30319'.
[15:41:53][restore] Nothing to do. None of the projects in this solution specify any packages for NuGet to restore.
[15:41:53][restore] Process exited with code 0
This leads to the compilation error in the 'MSBuild' TeamCity step that runs after the package restoring:
Assets file 'C:\TeamCity\...\MyProj\obj\project.assets.json' not found.
Run a NuGet package restore to generate this file.
For the 'MSBuild' TeamCity step I choose the MSBuildTools version manually as described in this SO answer:
But I didn't manage to find the similar setting for the 'NuGet Installer' step. Am I missing something?
I managed to overcome this specifying the -MSBuildPath command line parameter:
As #PeterLai said, nuget version is the right place to look.
So, because I had the same problem here, I updated Nuget inside Teamcity / Administration / Integrations / Tools.
I moved from 3.4.3 to 4.6.2, and just rebuild.
Now it finds my visual studio 2017 msbuild, version 15!
BEFORE:
NuGet command: D:\...\NuGet.CommandLine.3.4.3\tools\NuGet.exe restore D:\...\proj.sln
...
MSBuild auto-detection: using msbuild version '14.0' from 'C:\Program Files (x86)\MSBuild\14.0\bin'.
AFTER:
NuGet command: D:\...\NuGet.CommandLine.4.6.2\tools\NuGet.exe restore D:\...\proj.sln
...
MSBuild auto-detection: using msbuild version '15.5.180.51428' from 'C:\Program Files (x86)\Microsoft Visual Studio\2017\BuildTools\MSBuild\15.0\bin'.
2 things,
It might be because it's running it from the folder Starting NuGet.exe 4.1.0.2450 from C:\TeamCity\buildAgent\tools\NuGet.CommandLine.4.1.0\tools\NuGet.exe, and not in the source code directory as you'd expect.
Have you got a packages.config file in your project?
If you are only using .NET Core / .NET Standard projects ("SDK-based" csproj), you don't need to restore with nuget.exe but can create an msbuild invocation that calls the Restore target:
msbuild /t:Restore the.sln
This also applies to non-core/standard projects (classic csproj) if they use the PackageReference package management format:
I am using Continuous Integration feature in Team Services (was Visual Studio Online). My build definition targets a specific project in a solution (not the whole solution), which is ClientUI MVC website.
The solution contains three projects:
ClientUI
AdminUI
Client Services
The Build Definition for ClientUI Project:
Repository:
Nuget Installer Step:
I have tried different params but not working.
Visual Studio Build
Before trying to target the a single project, my build definition was targeting the whole solution with the following parameters:
NuGet Installer -> Path to Solution: **\*.sln
Visual Studio Build -> Solution: **\*.sln ; MSBuild Arguments: /p:outdir=$(build.artifactstagingdirectory)
It was working. However now, it generates this error in the Nugget Restore Task:
2016-04-22T21:07:00.6716725Z Set workingFolder to default: C:\LR\MMS\Services\Mms\TaskAgentProvisioner\Tools\agents\1.98.1\tasks\NuGetInstaller\0.1.25
2016-04-22T21:07:00.8163908Z Executing the powershell script: C:\LR\MMS\Services\Mms\TaskAgentProvisioner\Tools\agents\1.98.1\tasks\NuGetInstaller\0.1.25\NuGetInstaller.ps1
2016-04-22T21:07:01.5283529Z ##[error]Cannot find path 'C:\a\1\s\packages.config' because it does not exist.
2016-04-22T21:07:01.5439897Z C:\LR\MMS\Services\Mms\TaskAgentProvisioner\Tools\agents\1.98.1\agent\worker\tools\NuGet.exe restore "C:\a\1\s\packages.config" -NonInteractive
2016-04-22T21:07:03.0441507Z MSBuild auto-detection: using msbuild version '14.0' from 'C:\Program Files (x86)\MSBuild\14.0\bin'.
2016-04-22T21:07:03.0597010Z ##[error]Cannot determine the packages folder to restore NuGet packages. Please specify either -PackagesDirectory or -SolutionDirectory.
2016-04-22T21:07:03.0909881Z ##[error]Unexpected exit code 1 returned from tool NuGet.exe
Try setting "Installation type" to "Install" for "Nuget Installer" task since you are using "packages.config" to install the packages.
For anyone curious, the source of the error about "Please specify either -PackagesDirectory or -SolutionDirectory" is that the build process is trying to issue a command similar to this:
C:\hostedtoolcache\windows\NuGet\4.4.1\x64\nuget.exe restore D:\a\1\s\MyProject\packages.config -PackagesDirectory packages -Verbosity Detailed -NonInteractive
The below screenshots should help if you want to build a project (rather than the solution) and your nuget "packages" folder is at the solution-level.
Additionally, you may need to specify this as the "MSBuild Argument" in the build task of your project: /p:SolutionDir="/"
I had the same thing sorted it out by changing the mapping - go to Repository tab, I had my mapping to another directory which means the nuget installer could not execute.
I have to reference the test adapter DLL (xunit.runner.visualstudio.testadapter.dll) in our vNext Visual Studio Online build to execute the tests.
The problem is that with the new DNX structure, packages are being restored to C:\Users\{user}\.dnx\packages and are not relative to the project's path anymore.
How can I reference this location in the build?
We are using the hosted build agent.
I think the answer for your question can be found in the following StackExchange answer: Running unit tests in TFS/VSO Build vNext using xUnit adapter. Then the packages end up in a local directory and not the global .dnx cache.
...
Make a global.json file and put the following into it:
{
"packages": "packages"
}
That will force your dnu restore to put the packages into .\packages\, which will hopefully solve the problem.
I am trying to use MSDeploy to deploy an MVC project to the server using TeamCity. When I do this on my computer in powershell, using the following command:
msbuild.exe .\mvc.csproj /p:PublishProfile=DevServer /p:VisualStudioVersion=11.0
/p:DeployOnBuild=True /p:Password=MyPassword /p:AllowUntrustedCertificate=true
It builds the project and deploys it to the server (info defined in the DevServer publish profile) perfectly. The output shows an MSDeployPublish section at the end, in which I see text like Starting Web deployment task from source... and then with rows telling me what files are updated, etc.
When I run this on TeamCity, using an MSBuild Build step, on the same file, with the same parameters (from the same working directory) it builds the project but does not publish it. Instead it has the regular output from a build process (CoreCompile, _CopyFilesMarkedCopyLocal, GetCopyToOutputDirectoryItems, CopyFilesToOutputDirectory) but then does not actually go and publish anything.
What changes to I need to make to the setup in TeamCity to get it to publish deploy in the same way that it works using MSBuild from my computer?
(TeamCity 7.1, MSBuild 4.0, WebDeploy 3.0, Visual Studio 12, IIS 7. Related to my previous question)
We do our WebDeploys with a TeamCity MSBuild step configured as follows:
Build File Path: Server.csproj
Command Line Parameters:
/p:Configuration=%configuration%
/p:DeployOnBuild=True
/p:DeployTarget=MSDeployPublish
/p:MsDeployServiceUrl=https://%web.deploy.server%:8172/MsDeploy.axd
/p:DeployIisAppPath=%web.deploy.site%
/p:AllowUntrustedCertificate=True
/p:Username=
/p:AuthType=NTLM
We use integrated authentication; change as necessary to fit your scheme. The value of this, I think, is that it builds everything from scratch and doesn't rely on a pre-built package. From the gist you posted I noticed that you do some DB publishing, we don't use WebDeploy for that so I can't offer any guidance there. Hope this helps.
I use MSBuild.exe to package to zip, and MSdeploy.exe to deploy in separate steps.
To deploy the package.zip file on the command line:
"C:\Program Files\IIS\Microsoft Web Deploy V2\msdeploy.exe" -verb:sync
-source:package="C:\Build\MyAppName.Debug.zip"
-dest:auto,wmsvc=webservername,username=webdeploy,password=*******
-allowUntrusted=true
This command is also worth explaining in detail:
-verb:sync : makes the web site sync from the source to the destination
-source:package="C:\Build\MyAppName.Debug.zip" : source is an MSBuild zip file package
-dest:auto,wmsvc=webservername : use the settings in the package file to deploy to the server. The user account is an OS-level account with permission. The hostname is specified, but not the IIS web site name (which is previously specified in the MSBuild project file in the project properties).
You can modify parameters based on your configuration. I like it this way because with separate steps, its easier to debug problems.
Use TeamCity build step and the command line runner.
Update:
If you want an example of how to build the ZIP package using MSBuild, try something like this:
"C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe"
MyWebApp/MyWebApp/MyWebApp.csproj
/T:Package
/P:Configuration=Debug;PackageLocation="C:\Build\MyWebApp.Debug.zip"
This should work the same on your local PC as well as on the CI server.
Here are the config settings that finally worked for me:
/p:Configuration=CONFIG-NAME
/p:DeployOnBuild=True
/p:DeployTarget=MSDeployPublish
/p:MsDeployServiceUrl=http://SITE-URL/MsDeployAgentService
/p:username="USERNAME"
/p:password=PASSWORD
/p:AllowUntrustedCertificate=True
/P:CreatePackageOnPublish=True
/p:DeployIisAppPath=SITE-URL
/p:MSDeployPublishMethod=RemoteAgent
/p:IgnoreDeployManagedRuntimeVersion=True
I had exactly the same issue! I've posted the solution I used over at: MsBuild not finding publish profile
Basics were:
Install the Azure SDK 1.8 on the build server
Force the /P:PublishProfileRootFolder value to ensure MSBuild can locate the publish profile
Ensure that you have the Microsoft Web Developer Tools feature installed for Visual Studio. This was missing on my build agent but once I added it the TeamCity build worked just fine.
This can happen when the build target paths are missing from your MSBuild directory. Instead of trying to get those to line up on every developer machine, install the targets from the Nuget. That way it will always be the same for everyone, regardless of how their machine is setup.