I have three servers, one with white IP (SERVER1) and another(SERVER2 192.168.1.50) in my local net connect to Internet through provider net like 10.10... Also in my local net I've my another mini-server (SERVER3 192.168.1.51). I cannot work with SERVER3 with ssh.
So, I want: run in SERVER2 command "curl http://localhost/json:3333" and get answer from SERVER3 like in my home net: http://192.168.1.51/json.
For that:
In SERVER2, I open ssh tunnel with command:
"ssh -N -R 3333:192.168.1.51:80 admin#SERVER1"
And I have tunnel now in SERVER1, I send 'curl http://localhost:3333' and have right answer from http://192.168.1.51/index.html, but if I want to get any page I got fail, for sample: http://localhost/json:3333' will return 'Apache/2.4.25 (Debian) Server at localhost Port 80'
How I can tunneling all SERVER3 site with path and pages?
Simple mistake, right command must be http://localhost:3333/json'
Related
I'm using WinSSHTerm to connect to a proxy, from which I then connect to a server hosting a data warehouse. I just can't figure out how to reproduce my Putty connection using a shell command.
Short recap:
I first connect to the proxy server which maps the port 5432 to my local port 10001. After that, i connect to the database server and map its 5432 port to my proxy's 5432 port, which I previously mapped to my 10001 port locally. I am then able to connect to the databse via a database manager locally.
To do so:
I created the following connection to my proxy server first.
I then added a tunnel from there to my localhost port 10001.
Once I'm logged in to the proxy server, I use the following command to connect to the database server and map its 5432 port to the proxy's 5432 port.
ssh username#databaseServer -L 127.0.0.1:5432:databaseServer:5432
I'd like to leave putty and move to WinSSHterm, predefine some login commands for a specific server.
How may I reproduce the behavior above using a shell command?
Here's my initial try, which is unfortunately not working:
ssh username#databaseServer -L 127.0.0.1:5432:databaseServer:5432
Thank you
I was finally able to find the correct way to write it.
Loginc Cmds
ssh username#databaseServer -L 127.0.0.1:5432:databaseServer:5432
Cmd-line Args
-L 10001:localhost:5432
The next picture was used to create a tunnel with mobaxterm:
Does anyone knows the meaning? also, how can I do to translate this into Ubuntu Linux ssh command to create the tunnel specified by the picture?. I need this to connect to my db.
Thx
That looks roughly like
ssh myusername#grv.soccer.cpu.edu -p 7822 -L 1338:172.178.0.12:3338
which basically means: connect to grv.soccer.cpu.edu using username myusername, the server is using port 7822 instead of the default port 22 and, while you are it, put local port 1338 in LISTEN and tunnel-it to port 3338 of server/IP 172.178.0.12; after you've successfully connected to the grv.soccer.cpu.edu you'll have the service running on 172.178.0.12:3338 directly reachable locally on/at 127.0.0.1:1338.
I'm trying to forward website traffic to a secondary server (as a temp workaround) using SSH.
ServerA for example can be accessed with serverA.example.com:8080
ServerB can't be accessed from outside, but running a wget localhost:8888 on ServerB returns the website I want to display on serverA.example.com:8080
Both serverA and serverB can be SSH'ed into.
I'm guessing for this scenario, Remote Forwarding is needed ...
So from ServerA, I run the following:
ssh -R8080:localhost:8888 jan#serverB.example.com
or
ssh -R8888:localhost:8080 jan#serverB.example.com
In both cases if I go to serverA.example.com:8080, I get a "This webpage is not available"
In short, I need to be able to point my browser to serverA:8080 which should forward it to serverB:8888 via SSH as SSH is the only open port on serverB.
Any idea how I can get this setup working?
You don't need to use Remote port forwarding -R but Local port forwarding -L. As this on serverA :
ssh -L8080:localhost:8888 jan#serverB.example.com
This will redirect local port 8080 from serverA to port 8888 on serverB through the ssh connection to serverB.
Be sure that nothing is running on local port 8080 on serverA before launching your command.
I'm using SSH tunneling for the first time, so I'm trying to understand how to configure it.
I've got a remote Linux server that hosts a MySQL database that I'm trying to connect to. In order to access the MySQL database directly through a software that only recognizes local databases, I suppose SSH tunneling would be the right way to set up the access, correct?
Now, I'm trying to set up the tunneling on my 'home' computer which is running the software that's trying to access the MySQL database. My first question is whether this is reverse tunneling or normal tunneling? Secondly, is it local tunneling or remote tunneling?
Finally, from what I understand, my code is supposed to look something like
ssh -L 8080:mylinuxserver.mycompany.com:22 myuser#mylinuxserver.mycompany.com
Is this correct? Is my source port '22' since I'm using SSH and is my destination port 8080 (or is there something more appropriate)?
When I try to use the above code, I am able to login using my passphrase (since my key is already in the MyLinuxServer) but when I ping localhost:8080, it cannot find the host.
What am I doing wrong?
I've got a remote Linux server that hosts a MySQL database that I'm trying to connect to
The command should be:
ssh -L 8080:localhost:3306 myuser#mylinuxserver.mycompany.com
Where:
8080: is hte local port on your workstation
localhost: is corresponding to mylinuxserver.mycompany.com
3306: the MySQL port on above localhost.
then connect (from your workstation) to MySQL as:
mysql -h 127.0.0.1 --port=8080
Besides, ping localhost:8080 is wrong. Ping cannot work that way.
Try this:
ssh -f ssh_user#mylinuxserver.mycompany.com -L 3307:mysql1.example.com:3306 -N
Next, to access the mysql your trying to connect to:
mysql -h 127.0.0.1 -P 3307
Setup:
My computer (linux / unix) has an arbitrary IP address
I can connect to a central linux server which has a static ip
Remote linux systems are set up so they only respond to central server IP address on port 22
I want to port forward through the central server so I can use MySQLWorkbench and make python scripting connections on port 3306 to the remote systems.
Ideally, I would like the syntax for ssh command to make the port forwarding work;
Suppose I want to forward local port 3307 to 3306 on the remote system. Assume my ip is x.x.x.x, the central server IP is y.y.y.y, and the remote system IP is z.z.z.z;
I think it has something to do with ssh -L but I can only forward to the central server so far. Maybe I need to connect to the central server, set up forwarding there, then set up forwarding on my machine? I think functionality exists to do it with a single command using ssh.
If this is a duplicate, it should not be marked as such because without knowing what magic keyword to search for, you can't find the duplicate;
Clarification: port 3306 is NOT open on the remote server. Only 22
ssh -L :3307:z.z.z.z:3306 user#y.y.y.y -Nf
Works fine
or
ssh -L 3307:z.z.z.z:3306 user#y.y.y.y -Nf
To only bind to x.x.x.x's localhost
The first example binds to all interfaces
edit...
Just seen that z.z.z.z only has port 22 open.
on y.y.y.y you will also need to have a local port open
run on y.y.y.y
ssh -L 3307:localhost:3306 user#z.z.z.z -Nf
then on x.x.x.x
ssh -L 3307:localhost:3307 user#y.y.y.y -Nf
run these commands in a screen for best results
You can actually condense these 2 commands together
ssh -L 3307:localhost:3307 user#y.y.y.y -f 'ssh -L 3307:localhost:3306 user#z.z.z.z -Nf'
ssh -L <local-port-to-listen>:<remote-host>:<remote-port>
The ‘L’ switch indicates that a local port forward is need to be created
Best method is to create the tunnel using putty (ssh client). so you can start the shell, and it will create the ssh tunnel for you. this is a good reference
https://howto.ccs.neu.edu/howto/windows/ssh-port-tunneling-with-putty/