I got a requirement to do a slider in PEGA.
The issue is that I do not manage to get the field/property refreshed with the slider value. I need to use this property in a declare expression and in conditional visibility (layout).
I am looking for something like the autocomplete where the value is refresh without submitting.
Any idear will be welcome.
THX.
Ok, I have solved the issue. In order to actualise the property .Amount outside the layout, I needed to configure an action on the first layout. The one holding the slider. In this layout -> in actions : add an event: Change and Add an Action : Refresh-This section / Target Section.
The value is then dynamicly refreshed in the clipboard too.
PS : in order to have different step value inside the same slider (ex: from 0 to 10 step = 1, form 10 to 30 step = 3 ... ) just use a property in the Slider Parameters 'step' of the slider and link this property to a declare expression. Within the declare expression you can configure as much step as you want.
Related
I'm obviously missing something and hoping someone might be able to help.
I've an Interactive Grid, and a button.
When the button is pressed the dynamic action on the button has 2 steps.
Action 1 - Execute Javascript to take a value from one of the IG cells and put it into a page item.
Action 2 - Confirm Action - Are you sure you wish to delete &P10_JOB_ID.
I've made the page item, &P10_JOB_ID, visible and I can see the value has correctly been changed to the value from the IG.
I write P10_JOB_ID into a database table - I get the correct value
But the confirm message isn't picking up the correct value from P10_JOB_ID.
Namely it uses the value in P10_JOB_ID when the page starts, but then as I move around the IG pressing the button and changing the value of P10_JOB_ID, the text in the confirm message never changes.
Can anyone suggest what I might have missed, I'm baffled.
Thanks a lot
Substitutions like &P10_JOB_ID. are made when the page is rendered, not dynamically, so reflect the value at time of page load.
You will need to use Javascript to perform the conform action, something like:
apex.page.confirm ('Are you sure you wish to delete ' + $v('P10_JOB_ID') + '?', 'DELETE');
$v is an APEX Javascript function that returns the current value of a page item.
I used 'DELETE' as an example of a request value; you may want to do something different here.
Ok - having the setting of value and confirm as 2 separate actions is what causes the problem.
As per fac586
That is the expected behaviour. Static text substitutions are performed once during page show processing. They are not evaluated dynamically in the browser at runtime as values change.
Drop the second action and extend the first to display the confirm dialog using the apex.message.confirm JS API method, accessing the item value using the $v shorthand method.
I want to move the search bar which is at bottom of the data table in admin template to top ..
as this is defined in javascript .. any suggestion pls..
Taking this piece of code from the link you provided.
/*
* Set DOM structure for table controls
* #url http://www.datatables.net/examples/basic_init/dom.html
*/
sDom: '<"block-controls"<"controls-buttons"p>>rti<"block-footer clearfix"lf>',
Here you can see this sDom right. Thats the option in datatable used to set the Table structure and to place the sections accordingly. I would suggest you to take a look at Datatables Dom Settings
The letters you see in the settings are p , r,t, i, l, f. They actually mean
p - pagination control
r - processing display element
t - The table!
i - Table information summary
l - length changing input control
f - filtering input
So by replacing this Dom settings you should be able to place the items as you wish.
So what you would need is .
sDom: 'lftir'
Add the div's and styling accordingly as explained in the Markup and Styling in the above provided link.
I'm trying to check if a value is contained in the innertext of a webelement but I'm having a little problem: frames seem to change at every refresh of the pages.
These are the steps I've recorded:
Browser("SystemPage").Page("SystemP").Frame("dme2_header").Image("Gestione Anagrafiche").Click<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_appl").WebEdit("pdrBean.pdrPod").Set parameter("POD")<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_appl").WebButton("Cerca").Click
Browser("SystemPage").Page("SystemP").Frame("dme2_appl_2").Image("show_files").Click
Browser("SystemPage").Page("SystemP").Frame("dme2_appl_6").Image("Lente").Click
cctype = Browser("SystemPage").Page("SystemP").Frame("dme2_appl_7").WebElement("arrow_down").GetROProperty("innertext")<br>
DataAct = Browser("SystemPage").Page("SystemP").Frame("dme2_appl_7").WebElement("arrow_down_2").GetROProperty("innertext")<br>
Browser("SystemPage").Page("SystemP").Frame("dme2_header").Image("Gestione Anagrafiche").Click
The frames "dme2_appl6" and "dme2_appl7" changes at every refresh of the two pages.
The question is simple: how can I rewrite these two actions to make them universal?
I've tried to do something like:
Set objFrame = Frame("title:=dme2_appl_.")
and then
Browser("SystemPage").Page("SystemP").objFrame.Image("Lente").Click
But QTP gives me an error in return: "property or method not supported by the object"
Please try using the below code
Browser("SystemPage").Page("SystemP").Image("Lente").Click
Avoid using the "Frame" and if you really want to use it, put regex for name property of Frame.
Go to Object Properties--> Click on the Frame object --> Mandatory Properties--> Change name property as
like iFrame_213123123 to i.*
Hope this will solve your problem.
I don't think you can use a frame object that way. When you write Page().Frame() UFT sets the frame's parent in different way than if you first create the Frame.
Think of Frame() as a function that behaves differently when called on a Page or as a free function.
Try:
Browser("SystemPage").Page("SystemP").Frame("title:=dme2_appl_.")
I have a scrollableView with several views inside and I'd like to add item to some of these view if they meet a certain criteria, like if they have data attached or not. Also I'm using Alloy, here's my markup
<ScrollableView id="scrollableView">
<View id="view" class='coolView'></View>
...
</ScrollableView>
To know if there are data attached I check the currentPage attribute like so:
function updateCurrentView(e) {
currentView = e.currentPage;
}
But I have no idea how to add an item to the current View.
Edit: To add some clarification, I have a label which when clicked allow me to choose two currencies, when chosen these currency pairs are saved in the database and should be displayed instead of the label. So my guess was to check whether the current view has currency pair saved.
There are 2 things to take care of here:
1.Whenever a currency is selected,immediately label on that particular view will change.
2.Whenever the scrollableView is loaded,it must always refer to the database if a currency is selected.
First one can be done as:
1.Get the instance of scrollableView using the getView method of alloy controller.Pass the id of the scrollableView to it.Lets call it myScrollableView.Refer this for more info.
http://docs.appcelerator.com/titanium/latest/#!/api/Alloy.Controller
2.Use var currentView=myScrollableView.getCurrentPage() to the get the current page which will be a number.
3.Now use the scrollableView instance to get all the views.
var viewArray=myScrollableView.getViews();
4.viewArray[currentView] will give you the view of current page.After you have got the view you can change the desired label using:
viewArray[currentView].children[positionOfTheView]
The "positionOfTheView" can be obtained by printing the viewArray[i].children array using Ti.API.info.
Second thing can be accomplished as follows:
1.Get the instance of scrollableView using the getView method of alloy controller.Pass the id of the scrollableView to it.Lets call it myScrollableView.Refer this for more info.
http://docs.appcelerator.com/titanium/latest/#!/api/Alloy.Controller
2.Now use the scrollableView instance to get all the views.
var viewArray=myScrollableView.getViews();
3.This is a JavaScript array of all the views in the scrollableView. Now iterate through this array and according to the data in the database,change the concerned view using:
viewArray[i].children[positionOfTheView]
The "positionOfTheView" can be obtained by printing the viewArray[i].children array using Ti.API.info.
I'm on ExtJS 4 and using an MVC approach. I've created a simple grid view class, and have added a componentquery type 'ref' to that view in my controller. Within the initial grid view itself I set several columns to be hidden and some to be visible by default. The rendering of the grid with those settings is all working fine.
Then I have a button that, when clicked and based on some other conditions, will make some of the initially hidden grid columns visible. This works as well.
But what I need is a way to later 'reset' the grid to its initial view (with the correct columns hidden/visible, as they were initially).
I've tried various permutations of the following with no effect:
var theGrid = this.getTheGrid();
theGrid.reconfigure(store, theGrid.initialConfig.columns);
theGrid.getView().refresh();
I suppose I could loop through every column and reset its 'hidden' state, but would think there's a way to just 'reset' back to what's set in the class? Advice?
SOLUTION UPDATE
Appreciate the pointer from tuespetre. For anyone coming along in the future looking for specifics, here is what was needed (at least for my implementation):
Within the view, moved the column defs into a variable
Within the view, columns ref within the class becomes:
columns: myColumns,
Within the view, the following function created within the class:
resetGrid: function(){
this.reconfigure(null, myColumns);
},
Within the controller:
var theGrid = this.getTheGrid();
theGrid.resetGrid();
You will just need to create a function on your view class to encapsulate that functionality.