I am trying to get the content of all the documents (current version) from a documentum source using the following code
IDfSysObject document = (IDfSysObject) session.getObject(new DfId(eachFileMetadata.get(some document id).toString()));
ByteArrayInputStream docContent = document.getContent();
I am getting the following error:
DfException:: THREAD: Thread-585; MSG: [DM_STORAGE_E_NOT_ACCESSIBLE]error: "Storage area dist_store_a_store_010 is not currently accessible. Reason: errno: 145, message: Connection timed out."; ERRORCODE: 100; NEXT: null
at com.documentum.fc.client.impl.docbase.DocbaseExceptionMapper.newException(DocbaseExceptionMapper.java:57)
at com.documentum.fc.client.impl.connection.docbase.MessageEntry.getException(MessageEntry.java:39)
at com.documentum.fc.client.impl.connection.docbase.DocbaseMessageManager.getException(DocbaseMessageManager.java:137)
at com.documentum.fc.client.impl.connection.docbase.netwise.NetwiseDocbaseRpcClient.checkForMessages(NetwiseDocbaseRpcClient.java:329)
at com.documentum.fc.client.impl.connection.docbase.netwise.NetwiseDocbaseRpcClient.applyForInt(NetwiseDocbaseRpcClient.java:600)
at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection$6.evaluate(DocbaseConnection.java:1343)
at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection.evaluateRpc(DocbaseConnection.java:1141)
at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection.applyForInt(DocbaseConnection.java:1336)
at com.documentum.fc.client.impl.docbase.DocbaseApi.makePuller(DocbaseApi.java:630)
at com.documentum.fc.client.impl.connection.docbase.RawPuller.<init>(RawPuller.java:22)
at com.documentum.fc.client.impl.session.Session.makePuller(Session.java:3756)
at com.documentum.fc.client.impl.session.SessionHandle.makePuller(SessionHandle.java:2468)
at com.documentum.fc.client.content.impl.BlockPuller.<init>(BlockPuller.java:27)
at com.documentum.fc.client.content.impl.PusherPullerContentAccessor.buildStreamFromContext(PusherPullerContentAccessor.java:40)
at com.documentum.fc.client.content.impl.PusherPullerContentAccessor.getStream(PusherPullerContentAccessor.java:28)
at com.documentum.fc.client.content.impl.ContentAccessorFactory.getStream(ContentAccessorFactory.java:37)
at com.documentum.fc.client.content.impl.Store.getStream(Store.java:63)
at com.documentum.fc.client.content.impl.DistributedStore___PROXY.getStream(DistributedStore___PROXY.java)
at com.documentum.fc.client.content.impl.Content.getStream(Content.java:185)
at com.documentum.fc.client.content.impl.Content___PROXY.getStream(Content___PROXY.java)
at com.documentum.fc.client.content.impl.ContentManager.getStream(ContentManager.java:84)
at com.documentum.fc.client.content.impl.ContentManager.getStream(ContentManager.java:53)
at com.documentum.fc.client.DfSysObject.getContentEx3(DfSysObject.java:1952)
at com.documentum.fc.client.DfSysObject.getContentEx2(DfSysObject.java:1942)
at com.documentum.fc.client.DfSysObject.getContent(DfSysObject.java:1932)
at com.documentum.fc.client.DfDocument___PROXY.getContent(DfDocument___PROXY.java)
the above error occured when I am trying to get the content of a document,can anyone please help me??
It seems your storage location is not accessible.
Query your dm_location for storage_01 and find out the file_system_path attribute value of this record.
If your content servers are on Unix servers, then check if the mount with file_system_path value is available using df- h command.
If your content servers are on Windows, then check if you have mapped drive available with file_system_path value.
If you see them available, I will recommend to create and access files on this file system. Sometimes there are issues with stale connection on NFS mounts..
Related
We are trying to replicate data from AlloyDB to Bigquery using Datastream.
We Get "An unknown error occurred. Please try again. If the error persists, contact Google support."
In the Datastream console --> objects list, we see all source tables with Object Status "Failed" and Backfill status "Completed".
In Bigquery we see only a subset of the tables (not all the "Completed" objects were synced).
In the Logs Explorer I can see this error on BQ:
I also see this error: error: {
code: 11
message: "Unsupported primary key column either does not exist or is a pseudocolumn at [1:401]"
}
The column referred in the error is of type enum.
The desired situation is having all the AlloyDB tables replicated into Bigquery.
The error message is not very informative...
What does it mean?
What would be the best way to go about troubleshooting this?
We're actively working on making these error messages be more informative, and improvements are continuously being rolled out as we identify more edge cases. Assuming you followed all the steps in the documentation, then you may need to open a ticket with support for further investigation. If a support ticket isn't an option, you can still report the issue using the public issue tracker
I just had this same issue but connecting to a PostgreSQL in AWS RDS:
Beginning with Postgres 10, passwords are encrypted using SCRAM-SHA-256 in PostgreSQL. Google DataStream still expects MD5 password encryption, or it will generate an "unknown error" in the logs and fail the backfills.
You'll need to update your postgresql.conf (or RDS Cluster Parameter Group if you're using AWS like me):
password_encryption = 'MD5'
Restart the database and make sure the parameter has changed with:
SHOW password_encryption;
Reset the password of your users:
ALTER USER "{username}" with password '{password}';
More info from the PostgreSQL docs: https://www.postgresql.org/docs/current/auth-password.html
I am using ignite native and using atomicity as TRANSACTIONAL_SNAPSHOT when I am trying the load the old storage which was configured with amoticity TRNASACTIONAL it is giving the Unknown page type issue after deleting the .dat file but if I am using new storage it is working fine. Can anybody help me?
org.h2.jdbc.JdbcSQLException: General error: "java.lang.IllegalStateException: Unknown page type: 10009 pageId: 0002ffff00000006"; SQL statement:
CREATE TABLE "DFM"."ANSWER_TYPE_ENUM" (_KEY VARCHAR INVISIBLE NOT NULL,_VAL OTHER INVISIBLE,"ID" VARCHAR,"ENUM_VALUE" VARCHAR) engine "org.apache.ignite.internal.processors.query.h2.H2TableEngine" [50000-197]
I've never seen errors like these, but I would say that TRANSACTIONAL_SNAPSHOT is experimental and should be avoided for now.
More info from stms :
Short Text
SQL error "SQL code: -10108" occurred while accessing table "CDHDR".
What happened?
Database error text: "SQL message: Session has been reconnected."
Return value of the database layer: "SQL dbsl rc: 99"
The problem is that client is running this code through the job in which I am not available to debug it. All I know is that it is working for other countries selected but for some specific it is not so the question is :
Was it a temporary connection error between two servers or is it data overload issue due to SELECT statement?
At the moment I am not really sure which thing I have to look on the system, the same program once produced the error for exceeding the limit in the db query ( > 10 minutes) so this might be related to system configuration or what?
Thanks in advance
I have an API in WSO2. When I try to test it in the store with valid parameters via GET, it returns the following error message:
<am:fault xmlns:am="http://wso2.org/apimanager">
<am:code>101504</am:code>
<am:type>Status report</am:type>
<am:message>Runtime Error</am:message>
<am:description>Send timeout</am:description>
</am:fault>
I have already searched and tried a lot, but with no success, always returning the same error. Don't know if helps, but the api that I try to access is a PHP file.
Any ideas?
EDIT:
I have identical apis to this one, changing only the response, that are working properly. Even if I erase the php file that the API is pointing, the error keep coming.
EDIT:
I changed the code in Management Console, in Metadata>List>APIs:
{"production_endpoints":
{"url":"http://site/myapi.php","config":
{"format":"leave-as-is","optimize":"leave-as-
is","actionSelect":"fault","actionDuration":30000}},
"sandbox_endpoints":
{"url":"http://site/myapi.php","config":
{"format":"leave-as-is","optimize":"leave-as-
is","actionSelect":"fault","actionDuration":30000}},
"implementation_status":"managed","endpoint_type":"http"}
to this:
{"production_endpoints":
{"url":"http://10.20.40.189/ConsultaAutorizacaoCadPos.php","config":null},
"sandbox_endpoints":{"url":"http://10.20.40.189/ConsultaAutorizacaoCadPos.php","config":null},
"implementation_status":"managed","endpoint_type":"http"}
And this error message vanishes. But this new one appears:
<am:fault xmlns:am="http://wso2.org/apimanager">
<am:code>303001</am:code>
<am:type>Status report</am:type>
<am:message>Runtime Error</am:message>
<am:description>Currently , Address endpoint : [ Name : admin--myapi_APIproductionEndpoint_0 ] [ State : SUSPENDED ]</am:description>
EDIT: this error message is appearing just sometimes. Most of the time the request takes long time to run and then returns nothing( no content )
Any ideas how to solve it?
I am working on xcart website for my company. Right now, I always get the error messages from my website http://mothersenvogue.com.kh/ as below:
[24-May-2015 08:50:51] (shop: 24-May-2015 15:50:51) SQL error:
Site : https://mothersenvogue.com.kh
Remote IP : 176.9.29.209
Logged as :
SQL query : SHOW FIELDS FROM xcart_session_history
Error code : 103
Description : Got error 28 from storage engine
Request URI: /secure_login.php?xid=025530538a738ddc86617a9aa81bc990
Backtrace:
/home/www/mothersenvogue.com.kh/include/func/func.db.php:189
/home/www/mothersenvogue.com.kh/include/func/func.db.php:115
/home/www/mothersenvogue.com.kh/include/func/func.db.php:384
/home/www/mothersenvogue.com.kh/include/func/func.db.php:630
/home/www/mothersenvogue.com.kh/include/func/func.db.php:458
/home/www/mothersenvogue.com.kh/include/sessions.php:161
/home/www/mothersenvogue.com.kh/init.php:524
/home/www/mothersenvogue.com.kh/preauth.php:51
/home/www/mothersenvogue.com.kh/auth.php:45
/home/www/mothersenvogue.com.kh/secure_login.php:37
-------------------------------------------------
Many error messages are from func.db.php, init.php, preauth.php, auth.php all at the same line number, and on the same SQL Query "SHOW" statement.
I tried to check all the above files at their given line number but I could not find anything wrong.
Pleasse kindly help advise me what is wrong with it? is it something wrong inside these files as I got many error messages sent to me by email with the similar content like above.
I was refered to here from my previous question in xcart forum, and here is my question there:
https://bt.x-cart.com/view.php?id=44717
Many thanks.
In most cases the file storage (the drive where your files are located on the hosting server, where you checked the free space) is physically located on a different virtual / physical server / drive. Most hosting companies use an optimized dedicated servers for MySQL.
Thus you see enough space in your account, but MySQL still reports that there is no space left on the drive (where MySQL server is currently running).
Thus the best way is to contact the hosting provider and find out what's the situation with the disk space on that very machine, where MySQL is running.