I have two ssh keys i've created, first one for my personal use and
the second one which I just created for work/school.
When I log into using git CLI using SSH with the second SSH key, it says
that i have successfully logged in like below
$ winpty gh auth login
? What account do you want to log into? GitHub.com
? You're already logged into github.com. Do you want to re-authenticate? Yes
? What is your preferred protocol for Git operations? SSH
? Upload your SSH public key to your GitHub account? C:\Users\dykim\.ssh\id_rsa.
pub
? Title for your SSH key: (GitHub CLI) second-key
? Title for your SSH key: future_proof
? How would you like to authenticate GitHub CLI? Login with a web browser
! First copy your one-time code: 0B1D-6370
Press Enter to open github.com in your browser...
✓ Authentication complete.
- gh config set -h github.com git_protocol ssh
✓ Configured git protocol
HTTP 422: Validation Failed (https://api.github.com/user/keys)
key is already in use
so somehow there isn't a problem to authenticating.
But I am worried that this will somehow pop up later and be a problem later when I am
working on my future projects for work.
What can I do to avoid this issue?
That seems similar to a pending reported issue #5299: "Spurious auth error when SSH key is already registered on account"
Steps to reproduce the behavior
Run gh auth login and select an SSH key that is already registered with the account
Get the above error, even though the key will work correctly
Expected vs actual behavior
I think there are a couple of ways that the handling of already registered keys could be improved:
Given the CLI app is granted full permission over the user's registered SSH keys, it could presumably list the already registered ones first and only attempt to register a new key if it wasn't already registered.
Then the error would only occur if the key was registered on a different account (or you uploaded it via the web browser while also attempting to register the CLI app, which would be an odd thing to do)
Customise the error message when this step fails to say something like "key already in use (Note: this error is expected if this SSH key was already registered on your account)"
I'm facing problems while trying to pull/push my code into a GitHub repository using the cmd prompt for the last two days. How can I resolve this issue?
Logon failed, use Ctrl + C to cancel basic credential prompt. Username for 'https://github.com': satyendrasingh8 Password for 'https://satyendrasingh8#github.com': remote: Invalid username or password. fatal: Authentication failed for 'https://github.com/satyendrasingh8/chatApp.git/'
Fitz_Hoo is right! I just wanted to give a more detailed explanation that fix my issue. Essentially GitHub deprecated their password authentication recently (you can read more by clicking here).
Now instead of adding your username/email and password, you will login with your browser. The image below is the new interface. As Fitz_hoo mentions, you must update your Git to see the new changes!
If you are using Windows, you can simply use this command below to update your Git:
git update-git-for-windows
I fixed the problem just simply by upgrading my client Git Bash to the latest version!
When I encountered the problem, I received an email from a GitHub official, who told me the reason was mainly the Git version was incompatible:
GitHub has changed how users authenticate when using Git for Windows, and now requires the use of a web browser to authenticate to GitHub. To be able to login via web browser, users need to update to the latest version of Git for Windows. You can download the latest version at:
https://gitforwindows.org/
One reason for this message could be that the remote branch you were trying to pull was already deleted.
Delete the GitHub entry from Credential Manager: Control Panel → User Accounts → Credential Manager.
Then push the code again.
For me, the problem was that instead of my username I was trying to login with my email.
I received an email from GitHub telling me
We recently updated the format of our API authentication tokens,
providing additional security benefits to all our customers. In order
to benefit from this new format, please regenerate your personal
access token
I regenerated my personal access token (PAT) and was then unable to log in from command line on Windows 10 when I tried something like git pull.
A window would pop up, inviting me to enter 'username or email' and password. I tried various combinations, using the PAT, as mentioned in the GitHub documentation, and the actual password, but every time I received:
Logon failed, use ctrl+c to cancel basic credential prompt
Thanks to the answers from Fitz_Hoo and ousecTic, I updated my Git install with the command provided by ousecTic, and the authentication process was then completely different.
You can opt to use a PAT, but when you paste it in, no characters at all are shown, so just hit Enter.
In my case, I had this issue in relation to the federated authentication to AWS CodeCommit. The fix was to upgrade git to +v2.30.z (i.e. 2.35.3) and disable interactive prompt (docs):
git config --global credential.interactive false
A global configuration in ~/.gitconfig would look like:
[credential]
interactive = false
A AWS CodeCommit specific configuration, would look like (in ~/.gitconfig):
[credential "https://git-codecommit.us-east-1.amazonaws.com"]
interactive = false
here is the solution which works for me, uninstall Git from Machine after that install new version of it and sign in via web
I created an application on existent OpenShift project by pulling a docker image from remote repo.
The pod is created but fails with STATUS "Crash Loop Back-off".
Invesitgating the reason using
oc log <pod id> -p
it appears a list of unsuccessfull "chown: changing ownership of '...': Operation not permitted
I found this is due to non predictable user id running the container.
According to
https://docs.openshift.com/container-platform/3.6/admin_guide/manage_scc.html and various post here and there,
it seems the solution is to relax security policy:
oc login -u system:admin https://<remote openshift endpoint>
oadm policy add-scc-to-group anyuid system:authenticated
If this is the solution, I don't know, because I cannot get out of 1st problem:
oc login -u system:admin
asks for login/pwd and after print an error
error: username system:admin is invalid for basic auth
I guess there is the need of a certificate, a token, something secure, but I cannot understand how to generate it from Openshift, or
if there was a key pair to generate locally (of which kind) and how to bind the key to the user. Furthermore, checking in the web console
I cannot see that kind of user (system:admin).
Am I missing something?
Thanks a lot,
Lorenzo
I am trying to open a port via ssh in my VM instance in Google Compute engine but I keep getting error messages.
Here is my command:
myname#instance-2:~$ gcloud compute firewall-rules create baasbox-console-port --allow tcp:9000 --source-range
s=0.0.0.0/0
here is the error message:
NAME NETWORK SRC_RANGES RULES SRC_TAGS TARGET_TAGS
ERROR: (gcloud.compute.firewall-rules.create) Some requests did not succeed:
- Insufficient Permission
pls what am i doing wrong?
gcloud auth login
Go to the following link in your browser:
(Cut and past the link into your browser address bar)
For me (Ubuntu 14.04) this does not return a verification code on FireFox, use Chromium. You should get a long string of characters as a verification code. Cut and past this into the terminal. I would then see this:
ERROR: There was a problem with web authentication.ERROR: (gcloud.auth.login) invalid_grant
After several tries of generating the code and pasting it, I copied the code and the trailing colon(:) then it worked
You need to do either of the following:
run gcloud auth login in your instance, or
when you create your VM, you need to give it read-write access to Google Cloud Platform APIs by adding the compute-rw scope as follows:
gcloud compute instances create $VM --scopes compute-rw [...]
See the gcloud compute instances create docs for more info.
I kept getting kicked out of my compute engine instance after a few seconds of idle with the indicated error (255).
I used 'gcloud compute ssh' to log in.
I am using the default firewall setting, which I believe would be good enough for ssh.
But if I am missing something, please so indicate and suggest the fix for this error.
Basically I can't get any efficient work done at this point having to ssh in so many times.
gcloud denies an ssh connection if there was a change in the setup, e.g.
after you changed your default zone or region, or you created another instance.
Then, you must update the ssh keys in your metadata by
sudo gcloud compute config-ssh
If this complains about different entries in your config file where your ssh key entries are stored, ~/.ssh/config, delete this file and execute the above command again.
If you have installed gcloud without sudo, you can omit sudo.
255 is the interactive ssh exit code for ssh failure - otherwise interactive ssh exits with the exit code of the last command executed in the ssh session.
The next time you get exit code 255 from ssh try running with --ssh-flag="-vvv" (more v's => more debugging output) and see if it helps track down connection problems.
For those who stop by this page. This helped me to solve the problem.
Try to the following:
Go to your Google and remove the SSH key for the server
Go to your google cloud console -> compute engine -> Metadata -> "SSH
keys" tab and click on edit. Here you can delete the ssh keys.
Run the gcloud command again
Click on the "Instances" link on the left side of your google cloud account, which will list down all the instances on the right side. Under
connect column, you will see "SSH" drop-down, click on "View cloud
Command" and this will bring a new dialog. Copy that command and run on your PC's terminal. This will let you SSH into the google compute engine.
It seems a feature/issue from Google Cloud Platform itself, we are going to continue checking it.
If the default network was edited, or if not using the default network, you may need to explicitly enable ssh access by adding a firewall-rule:
$ gcloud compute firewall-rules create --network=YOUR_NETWORK \
default-allow-ssh --allow tcp:22
After that, retry the 'gcloud compute ssh' command.
This is a real problem with very little documentation to dealing with it.
Sometime after creating the instance using the gcloud sdk ssh snippet provided via GCP console stopped working and continually errors with 255 making connecting to ssh on the instance only available through browser via GCP console for the compute instance in question. Not to mention this has happened to me on many different instances some without touching the default account permissions after initial setup and deployment which is overly frustrating. Cause for no reason it just stops working...works, then doesn't...
The only thing that worked for me was creating a new user to connect with through gcloud sdk! Be it Windows/PowerShell or Linux locally, using the following snippet:
gcloud compute ssh newuser-name#instance-name
That all per GCP documentation here: https://cloud.google.com/compute/docs/troubleshooting/troubleshooting-ssh
Everything else passed per suggestions in documentation - port 22 open with access meaning it has to be a a problem with the default users authorization_keys WHICH they provide absolutely no documentation on how to fix that - at least nothing I could find on fixing (not creating or deleting)
I've tried updating the account, tried deleting the user and credentials from the instance, nothing appears to work. using:
gcloud compute --project "project-name" ssh --zone "us-east4-a" "instance-name"
Just doesn't work...
- even tried 'gcloud compute config-ssh --force-key-file-overwrite' NOTHING WORKS...
But creating a new user works every time, and once the user is created you can keep using that user via gcloud sdk
It's a work around, and I hate work around's for things like this but for my sanity this works at least until I can figure out how to reset the default account permissions, so if anyone has any ideas there or can point me in a direction for that I'd more than appreciate it!
IT was my mistake stating that the default firewall would allow all connections into an instance. The contrary turned out to be true. Please refer to an appropriate firewall rule must be set up to allow connection into an instance
Anh-
If you have Identity-Aware Proxy (IAP) enabled for your setup, try adding the --tunnel-through-iap option to the gcloud compute ssh command.
$ gcloud compute ssh --zone <zone> --project <project> --tunnel-through-iap <instance-name>
More information for people landing on this page, if you're using preemptible instances to save some compute costs, that could also be the reason for getting kicked out like this. Your instance may have just randomly stopped.
In my case, the I had created a bootable disk for the VM without adding the information of what source-image it needs to have. Because of this, even though the instance was coming up alright and ssh-allow rule was there, the VM was not booting up.
Finally added the source image to the disk and I was able to ssh into the VM.
Hope this helps for someone.
I had the same error . i restarted the VM instance and ssh workis fine
I had the problem where after clicking on the SSH button it would keep trying to establish a connection and fail. After long struggle I resolved it by adding Service Account User role to myself. If your account was created after the VM instance was created, it might result in this situation.
I know this was opened a long time ago, but for a more recent update on this topic. I had the same trouble connecting via ssh. It was giving the error code 225. Obviously there was a connectivity issue. There was already a firewall rule set under VPC network-> Firewall to allow ssh. However, to fix this problem I had to go to the specific network and create a rule under the network Firewall Rules. VPC network details -> FIREWALL RULES and create an inbound TCP rule for port 22.
if you are having a problem trying to access you g-cloud VM instance from your computer terminal remotely, and are getting the error code 255,the problem is that the ssh protocols in your computer are wrong or not updated.
In this case the best way to fix it is to go to your home directory (in your computer) check the hidden files and find the folder ".ssh" .Just delete this folder and re-open your bash terminal. Then run again your gcloud vm command.
Example:
you#your_computer:~$ gcloud beta compute ssh --zone "us-central1-a" "your_VM_name" --project "your_project_name"
You should this time instead of getting the error 255 code, the messages below:
WARNING: The private SSH key file for gcloud does not exist.
WARNING: The public SSH key file for gcloud does not exist.
WARNING: You do not have an SSH key for gcloud.
WARNING: SSH keygen will be executed to generate a key.
This tool needs to create the directory [/home/your_name/.ssh] before being able to
generate SSH keys.
Do you want to continue (Y/n)?
Type "Y" and gcloud will setup the new protocols by creating a brand new updated .ssh file.
After that you should be able to access your VM with your gcloud command without any problem.
That should solve the problem
Cheers
https://blackpearlmatrix.com
had the exact same symptoms - in my case the reason appeared to be the following. I was using root user + ssh key whereas root login is by default disabled in /etc/ssh/sshd_config (PermitRootLogin property).
I eventually had to delete my instance and make a new one with the same disk. See https://cloud.google.com/compute/docs/troubleshooting/troubleshooting-ssh#use_your_disk_on_a_new_instance for details.
For me, my other teammates were able to login into the machine, but not me. So I asked them to create a user of my name with sudo rights, logged into serial console and changed passwordAuthentication to yes followed by sudo service ssh restart (for few this could be sudo service sshd restart.)
Post this I was able to login with
ssh -o PreferredAuthentications=password username#publicIP -p 22
This trick worked fine for me.
Reinitializing the gcloud with "gcloud init" and generating new ssh keys resolved the problem for me.
I had same issue.
I had connected the serial control and had checked logs. and there was some error log like "there is no disk space". Then I had resized disk as written in this document.
Now I am able to connect to instance with ssh.
Try switching to a different Internet connection
So, I was getting the same error but in my case I was not able to log in to the instance at all.
(base) girish#girish:~$ gcloud beta compute ssh --zone "asia-east1-b" "fp-1" --project "fp-public"
ssh: connect to host 12.345.678.90 port 22: Resource temporarily unavailable
ERROR: (gcloud.beta.compute.ssh) [/usr/bin/ssh] exited with return code [255].
(base) girish#girish:~$ gcloud beta compute ssh --ssh-flag='-vvv' --zone "asia-east1-b" "fp-1" --project "fp-public"
OpenSSH_7.6p1 Ubuntu-4ubuntu0.3, OpenSSL 1.0.2n 7 Dec 2017
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: resolving "12.345.678.90" port 22
debug2: ssh_connect_direct: needpriv 0
debug1: Connecting to 12.345.678.90 [12.345.678.90] port 22.
[debug1: connect to address 12.345.678.90 port 22: Resource temporarily unavailable
ssh: connect to host 12.345.678.903 port 22: Resource temporarily unavailable
ERROR: (gcloud.beta.compute.ssh) [/usr/bin/ssh] exited with return code [255].
What worked for me:
I tried reinstalling lots of things and re-initializing various config and then landed on a thread which suggest to change the Internet network you are using and it worked!!
It's possible you have a rule that only allows whiltelisted IPs to ssh into a gcloud VM. So you may have forgotten to enable your work VPN or out of your work's office IP.
Try restarting your computer.
I got the same error and tried gcloud config ssh as mentioned previously to no avail. I then checked that the IDs and roles of serviceaccount and developer had 'editor' permissions, and that was fine. I started a new instance and logged out of all of my other google accounts and it still threw the error. Then, I restarted my computer and did not log back into my other google accounts. That fixed it.
When using IAP, GCP stores the key in instance metadata and then propagate
that to the ~/.ssh/authorized_keys file.
You might get the error OP talks about when you remove the key from the ~/.ssh/authorized_keys file and it's still in the instance metadata. Reason being:
GCP check that the user, key combo that you are using to ssh is already in the instance metadata.
It assumes that the exists in the ~/.ssh/authorized_keys file for that user and doesn't propagate the key.
As the key doesn't exist in ~/.ssh/authorized_keys file for whatever reason (you deleted it, someone else deleted it etc. etc.) - you get access denied.
If this is the case with you, then fix is simple: remove the instance metadata entry for that user, key combo (have attached an image for ref, just click X and remove your faulty key) and try ssh again
What worked for me was turning my firewall on. (On a Mac, ssh'ing into a gcp instance).
In another instance of the error, my connection worked fine when I was on ethernet, but not when I was on wifi. Switching back to ethernet allowed me to connect again.
In my case sorted out the issue after restarting the VM.
if you are able to access the VM previously and suddenly giving SSH issues, give it a try by restarting.
Permission wise check whether you have IAP-secured Tunnel User
gcloud compute ssh --zone "your_zone" "instance_name" --tunnel-through-iap --project "project_name"
If this not works check with the GCP built-in SSH client, and click open in browser window.
Hope this help !!!