I want to update and concatenate 3 columns in a new a attribute I've already created in my table. However when I execute my code, it puts attributes that before had values in null.
My code example:
update saber2012_1
set estu_fecha_nacimiento = Concat(estu_nacimiento_dia,'/',estu_nacimiento_mes,'/',estu_nacimiento_anno);
In this picture all values that is in null before these had values.
when I make this update
ALTER TABLE saber2012_uno ADD COLUMN punt_c_naturales int;
update saber2012_uno set punt_c_naturales = round((PUNT_BIOLOGIA::numeric + PUNT_FISICA::numeric + PUNT_QUIMICA::numeric) / 3,0);
alter table saber2012_uno DROP COLUMN PUNT_BIOLOGIA;
alter table saber2012_uno DROP COLUMN PUNT_FISICA;
alter table saber2012_uno DROP COLUMN PUNT_QUIMICA;
all is well. but I do not know because previous update is incorrect.
Perhaps you want concat_ws():
update saber2012_1
set estu_fecha_nacimiento = concat_ws('/', estu_nacimiento_dia, estu_nacimiento_mes, estu_nacimiento_anno);
This will ignore any of the arguments that are NULL.
However, your update will not change any other columns in the table. Perhaps the results are just coming back in a different order, when you query after the update.
Related
I created a table and inserted 3 rows. Then I added a new column using alter. How can I add values to the column without using any null values?
Two solutions.
Provide a default value for the column. This value will be used initially for all existing rows. The exact syntax depends on your database, but will will usually look like ..
this:
ALTER TABLE YourTable
ADD YourNewColumn INT NOT NULL
DEFAULT 10
WITH VALUES;
Add the column with null values first. Then update all rows to enter the values you want.
Like so:
ALTER TABLE YourTable
ADD YourNewColumn INT NULL;
UPDATE YourTable SET YourNewColumn = 10; -- Or some more complex expression
Then, if you need to, alter the column to make it not null:
ALTER TABLE YourTable ALTER COLUMN YourNewColumn NOT NULL;
Why don't you use UPDATE statement:
UPDATE tablename SET column=value <WHERE ...>
WHERE is optional. For instance in T-SQL for table:
I can update column NewTestColumn by this statement:
UPDATE [dbo].[Table] SET [NewTestColumn] = 'Some value'
Suppose you have a Employee table with these columns Employee_ID, Emp_Name,Emp_Email initially. Later you decide to add Emp_Department column to this table. To enter values to this column, you can use the following query :
Update *Table_Name* set *NewlyAddedColumnName*=Value where *Columname(primary key column)*=value
Example update TblEmployee set Emp_Department='Marketing' where Emp_ID='101'
I think below SQL useful to you
update table_name set newly_added_column_name = value;
update table_name
set new_column=value
Update table_name set column_name = value where 'condition';
suppose emp is the table and Comm is the new column then fire the below query .
update emp set Comm=5000
For Microsoft SQL (T-SQL):
UPDATE TABLE_NAME SET COLUMN_NAME=10;
here 10 means it will set all values by default to 10
i have a table with three columns say pqty,prqty and balqty.
what i want to do is, have to add values of pqty and prqty. and then it should be stored in balqty. while inserting or updating this table, each row must be affect.
i used this trigger, and it worked sometimes and most of times it wont. i dont know why.
CREATE TRIGGER tsl on stockledger
FOR update
AS declare #pqty int, #prqty int;
select #pqty=i.pqty from inserted i;
select #prqty=i.prqty from inserted i;
update Stockledger set balqty = (#pqty - #prqty)
PRINT 'AFTER Update trigger fired.'
I don't think this is a good use of a trigger. Instead, if you have the capacity, consider using a computed column (with PERSISTED to enhance performance):
ALTER TABLE StockLedger DROP COLUMN balqty;
ALTER TABLE StockLedger ADD COLUMN balqty AS pqty - prqty PERSISTED;
How can I create a sequence on a table so that it goes from 0 -> Max value?
I've tried using the following SQL code, but it does not insert any values into the table that I am using:
CREATE SEQUENCE rid_seq;
ALTER TABLE test ADD COLUMN rid INTEGER;
ALTER TABLE test ALTER COLUMN rid SET DEFAULT nextval('rid_seq');
The table I am trying to insert the sequence in is the output from another query. I can't figure out if it makes more sense to add the sequence during this initial query, or to add the sequence to the table after the query is performed.
Set the default value when you add the new column:
create sequence rid_seq;
alter table test add column rid integer default nextval('rid_seq');
Altering the default value for existing columns does not change existing data because the database has no way of knowing which values should be changed; there is no "this column has the default value" flag on column values, there's just the default value (originally NULL since you didn't specify anything else) and the current value (also NULL) but way to tell the difference between "NULL because it is the default" and "NULL because it was explicitly set to NULL". So, when you do it in two steps:
Add column.
Change default value.
PostgreSQL won't apply the default value to the column you just added. However, if you add the column and supply the default value at the same time then PostgreSQL does know which rows have the default value (all of them) so it can supply values as the column is added.
By the way, you probably want a NOT NULL on that column too:
create sequence rid_seq;
alter table test add column rid integer not null default nextval('rid_seq');
And, as a_horse_with_no_name notes, if you only intend to use rid_seq for your test.rid column then you might want to set its owner column to test.rid so that the sequence will be dropped if the column is removed:
alter sequence rid_seq owned by test.rid;
In PostgreSQL:
UPDATE your_table SET your_column = nextval('your_sequence')
WHERE your_column IS NULL;
I'm not fluent in postgresql so I'm not familiar with the "CREATE SEQUENCE" statement. I would think, though, that you're adding the column definition correctly. However, adding the column doesn't automatically insert data for existing rows. A DEFAULT constraint is for new rows. Try adding something like this afterwards to populate data on the existing rows.
DECLARE #i Int
SET #i = 0
SET ROWCOUNT 1
WHILE EXISTS (SELECT 1 FROM test WHERE rid IS NULL) BEGIN
UPDATE test SET rid = #i WHERE rid IS NULL
END
SET ROWCOUNT 0
I have a column details designed as varchar in oracle DB, this DB is being used now for customers and some rows already have data stored.
Now I want to change the column details to a Clob column. What is a smart way to accomplish this？
(as the previous answer) and here's the code:
ALTER TABLE atable
ADD (tmpdetails CLOB);
UPDATE atable SET tmpdetails=details;
COMMIT;
ALTER TABLE atable DROP COLUMN details;
ALTER TABLE atable
RENAME COLUMN tmpdetails TO details;
Add a clob column to the table
update clob column with values from varchar column
drop varchar column
rename clob column to varchar columns name
But this will not maintain the position of your column. It will move your column to the end of table. So if you want to maintain the position of your column as well follow these steps.
alter table atable add (tempdetails varchar2(4000));
update atable set tempdetails = details;
update atable set details = null; -- this is necessary to change data type
alter table atable modify details long; -- this is required because you can not change directly to clob.
alter table atable modify details clob;
update atable set details=tempdetails;
alter table atable drop column tempdetails;
This is the way in which you will maintain the data and position of your column intact even after changing the datatype. For detail information with example see here : http://www.oraclebin.com/2012/12/how-to-change-varchar2-to-clob-datatype.html
if you need your table data to be accessible during the process.. look at
DBMS_REDEFINITION
see a similar question on asktom
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1770086700346491686
I need to insert one column's data into another column within the same table.
Can anybody tell me how to write this?
Thanks
UPDATE table
SET col_2 = col_1
If you want to copy data from one column to another on the same table:
UPDATE table_name SET
destination_column_name=orig_column_name
WHERE condition_if_necessary
IF you want to add a new column and copy the original data to that column:
ALTER TABLE table_name
ADD new_column_name column_type NULL
UPDATE table_name SET
destination_column_name=orig_column_name
WHERE condition_if_necessary
If you want the column to be non-nullable, then you can set it to a default value before doing the update.
begin transaction
alter table Song add SortArtist nvarchar(128) not null default N''
go
update Song set SortArtist = Artist
commit transaction
alter table [dbo].[GetPermission]
add username1 varchar(100) ----------------ading new column username1
update GetPermission set username1=username